diff options
Diffstat (limited to 'stm-fmc.h')
| -rw-r--r-- | stm-fmc.h | 61 |
1 files changed, 2 insertions, 59 deletions
@@ -39,12 +39,6 @@ #define FMC_FPGA_BASE_ADDR 0x60000000 #define FMC_FPGA_ADDR_MASK 0x03FFFFFC // there are 26 physical lines, but "only" 24 usable for now -#define FMC_FPGA_NWAIT_MAX_POLL_TICKS 10 - -#define FMC_GPIO_PORT_NWAIT GPIOD -#define FMC_GPIO_PIN_NWAIT GPIO_PIN_6 - -#define FMC_NWAIT_IDLE GPIO_PIN_SET #define fmc_af_gpio(port, pins) \ GPIO_InitStruct.Pin = pins; \ @@ -58,60 +52,9 @@ extern void fmc_init(void); -static inline HAL_StatusTypeDef _fmc_nwait_idle(void) -{ - int cnt; - - // poll NWAIT (number of iterations is limited) - for (cnt=0; cnt<FMC_FPGA_NWAIT_MAX_POLL_TICKS; cnt++) - { - // read pin state - if (HAL_GPIO_ReadPin(FMC_GPIO_PORT_NWAIT, FMC_GPIO_PIN_NWAIT) == FMC_NWAIT_IDLE) - return HAL_OK; - } - - return HAL_ERROR; -} - -static inline HAL_StatusTypeDef fmc_write_32(const uint32_t addr, const uint32_t data) -{ - // calculate target fpga address - uint32_t *ptr = (uint32_t *) (FMC_FPGA_BASE_ADDR + (addr & FMC_FPGA_ADDR_MASK)); - - // write data to fpga - *ptr = data; - - // wait for transaction to complete - return _fmc_nwait_idle(); -} - -static inline HAL_StatusTypeDef fmc_read_32(const uint32_t addr, uint32_t * const data) +static inline void *fmc_fpga_addr(off_t addr) { - // calculate target fpga address - uint32_t *ptr = (uint32_t *) (FMC_FPGA_BASE_ADDR + (addr & FMC_FPGA_ADDR_MASK)); - - /* Pavel says: - * The short story is like, on one hand STM32 has a dedicated FMC_NWAIT - * pin, that can be used in variable-latency data transfer mode. On the - * other hand STM32 also has a very nasty hardware bug associated with - * FMC_WAIT, that causes processor to freeze under certain conditions. - * Because of this FMC_NWAIT cannot be used and FPGA can't properly signal - * to STM32, when data transfer is done. Because of that we have to read - * two times. - */ - - HAL_StatusTypeDef status; - - *data = *ptr; - status = _fmc_nwait_idle(); - - if (status != HAL_OK) - return status; - - *data = *ptr; - status = _fmc_nwait_idle(); - - return status; + return (void *)(FMC_FPGA_BASE_ADDR + (addr & FMC_FPGA_ADDR_MASK)); } #endif /* __STM_FMC_H */ |