diff options
Diffstat (limited to 'projects/hsm/mgmt-dfu.c')
| -rw-r--r-- | projects/hsm/mgmt-dfu.c | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/projects/hsm/mgmt-dfu.c b/projects/hsm/mgmt-dfu.c new file mode 100644 index 0000000..e57c521 --- /dev/null +++ b/projects/hsm/mgmt-dfu.c @@ -0,0 +1,123 @@ +/* + * mgmt-dfu.c + * --------- + * CLI code for looking at, jumping to or erasing the loaded firmware. + * + * Copyright (c) 2016, NORDUnet A/S All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * - Neither the name of the NORDUnet nor the names of its contributors may + * be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "stm-init.h" +#include "mgmt-cli.h" +#include "stm-uart.h" +#include "stm-flash.h" +#include "mgmt-dfu.h" + +#include <string.h> + +#define DFU_FIRMWARE_ADDR ((uint32_t) &CRYPTECH_FIRMWARE_START) +#define DFU_FIRMWARE_END_ADDR ((uint32_t) &CRYPTECH_FIRMWARE_END) +#define DFU_UPLOAD_CHUNK_SIZE 256 +#define HARDWARE_EARLY_DFU_JUMP 0xBADABADA + +extern uint32_t update_crc(uint32_t crc, uint8_t *buf, int len); + +/* Linker symbols are strange in C. Make regular pointers for sanity. */ +__IO uint32_t *dfu_control = &CRYPTECH_DFU_CONTROL; +__IO uint32_t *dfu_firmware = &CRYPTECH_FIRMWARE_START; +__IO uint32_t *dfu_firmware_end = &CRYPTECH_FIRMWARE_END; +/* The first word in the firmware is an address to the stack (msp) */ +__IO uint32_t *dfu_msp_ptr = &CRYPTECH_FIRMWARE_START; +/* The second word in the firmware is a pointer to the code + * (points at the Reset_Handler from the linker script). + */ +__IO uint32_t *dfu_code_ptr = &CRYPTECH_FIRMWARE_START + 1; + +static int cmd_dfu_dump(struct cli_def *cli, const char *command, char *argv[], int argc) +{ + cli_print(cli, "First 256 bytes from DFU application address %p:\r\n", dfu_firmware); + + uart_send_hexdump(STM_UART_MGMT, (uint8_t *) dfu_firmware, 0, 0xff); + uart_send_string2(STM_UART_MGMT, (char *) "\r\n\r\n"); + + return CLI_OK; +} + +static int cmd_dfu_erase(struct cli_def *cli, const char *command, char *argv[], int argc) +{ + int status; + + cli_print(cli, "Erasing flash sectors %i to %i (address %p to %p) - expect the CLI to crash now", + stm_flash_sector_num((uint32_t) dfu_firmware), + stm_flash_sector_num((uint32_t) dfu_firmware_end), + dfu_firmware, + dfu_firmware_end); + + if ((status = stm_flash_erase_sectors((uint32_t) dfu_firmware, (uint32_t) dfu_firmware_end)) != 0) { + cli_print(cli, "Failed erasing flash sectors (%i)", status); + } + + return CLI_OK; +} + +static int cmd_dfu_jump(struct cli_def *cli, const char *command, char *argv[], int argc) +{ + uint32_t i; + /* Load first byte from the DFU_FIRMWARE_PTR to verify it contains an IVT before + * jumping there. + */ + cli_print(cli, "Checking for application at %p", dfu_firmware); + + i = *dfu_msp_ptr & 0xFF000000; + /* 'new_msp' is supposed to be a pointer to the new applications stack, it should + * point either at RAM (0x20000000) or at the CCM memory (0x10000000). + */ + if (i == 0x20000000 || i == 0x10000000) { + /* Set dfu_control to the magic value that will cause the us to jump to the + * firmware from the CLI main() function after rebooting. + */ + *dfu_control = HARDWARE_EARLY_DFU_JUMP; + cli_print(cli, "Making the leap"); + HAL_NVIC_SystemReset(); + while (1) { ; } + } else { + cli_print(cli, "No loaded application found at %p (read 0x%x)", + dfu_firmware, (unsigned int) *dfu_msp_ptr); + } + + return CLI_OK; +} + +void configure_cli_dfu(struct cli_def *cli) +{ + cli_command_root(dfu); + + cli_command_node(dfu, dump, "Show the first 256 bytes of the loaded firmware"); + cli_command_node(dfu, jump, "Jump to the loaded firmware"); + cli_command_node(dfu, erase, "Erase the firmware memory (will crash the CLI)"); +} |