diff options
Diffstat (limited to 'projects/cli-test/cli-test.c')
| -rw-r--r-- | projects/cli-test/cli-test.c | 135 |
1 files changed, 1 insertions, 134 deletions
diff --git a/projects/cli-test/cli-test.c b/projects/cli-test/cli-test.c index 84c268b..26ebbc2 100644 --- a/projects/cli-test/cli-test.c +++ b/projects/cli-test/cli-test.c @@ -40,6 +40,7 @@ #include "stm-sdram.h" #include "mgmt-cli.h" #include "mgmt-dfu.h" +#include "mgmt-fpga.h" #include "test_sdram.h" #include <string.h> @@ -157,124 +158,6 @@ int cmd_show_keystore_data(struct cli_def *cli, const char *command, char *argv[ return CLI_OK; } -/* The chunk size have to be a multiple of the SPI flash page size (256 bytes), - and it has to match the chunk size in the program sending the bitstream over the UART. -*/ -#define BITSTREAM_UPLOAD_CHUNK_SIZE 4096 - -int cmd_fpga_bitstream_upload(struct cli_def *cli, const char *command, char *argv[], int argc) -{ - uint32_t filesize = 0, crc = 0, my_crc = 0, counter = 0, i; - uint32_t offset = 0, n = BITSTREAM_UPLOAD_CHUNK_SIZE; - uint8_t buf[BITSTREAM_UPLOAD_CHUNK_SIZE]; - - fpgacfg_access_control(ALLOW_ARM); - - cli_print(cli, "Checking if FPGA config memory is accessible"); - if (fpgacfg_check_id() != 1) { - cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed."); - return CLI_ERROR; - } - - cli_print(cli, "OK, write FPGA bitstream file size (4 bytes), data in 4096 byte chunks, CRC-32 (4 bytes)"); - - /* Read file size (4 bytes) */ - uart_receive_bytes(STM_UART_MGMT, (void *) &filesize, 4, 1000); - cli_print(cli, "File size %li", filesize); - - while (filesize) { - /* By initializing buf to the same value that erased flash has (0xff), we don't - * have to try and be smart when writing the last page of data to the memory. - */ - memset(buf, 0xff, sizeof(buf)); - - if (filesize < n) { - n = filesize; - } - - if (uart_receive_bytes(STM_UART_MGMT, (void *) &buf, n, 1000) != HAL_OK) { - cli_print(cli, "Receive timed out"); - return CLI_ERROR; - } - filesize -= n; - - /* After reception of 4 KB but before ACKing we have "all" the time in the world to - * calculate CRC and write it to flash. - */ - my_crc = update_crc(my_crc, buf, n); - - if ((i = fpgacfg_write_data(offset, buf, BITSTREAM_UPLOAD_CHUNK_SIZE)) != 1) { - cli_print(cli, "Failed writing data at offset %li (counter = %li): %li", offset, counter, i); - return CLI_ERROR; - } - - offset += BITSTREAM_UPLOAD_CHUNK_SIZE; - - /* ACK this chunk by sending the current chunk counter (4 bytes) */ - counter++; - uart_send_bytes(STM_UART_MGMT, (void *) &counter, 4); - } - - /* The sending side will now send it's calculated CRC-32 */ - cli_print(cli, "Send CRC-32"); - uart_receive_bytes(STM_UART_MGMT, (void *) &crc, 4, 1000); - cli_print(cli, "CRC-32 %li", crc); - if (crc == my_crc) { - cli_print(cli, "CRC checksum MATCHED"); - } else { - cli_print(cli, "CRC checksum did NOT match"); - } - - fpgacfg_access_control(ALLOW_FPGA); - - return CLI_OK; -} - -int cmd_fpga_bitstream_erase(struct cli_def *cli, const char *command, char *argv[], int argc) -{ - fpgacfg_access_control(ALLOW_ARM); - - cli_print(cli, "Checking if FPGA config memory is accessible"); - if (fpgacfg_check_id() != 1) { - cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed."); - return CLI_ERROR; - } - - /* Erasing the whole config memory takes a while, we just need to erase the first sector. - * The bitstream has an EOF marker, so even if the next bitstream uploaded is shorter than - * the current one there should be no problem. - * - * This command could be made to accept an argument indicating the whole memory should be erased. - */ - if (! fpgacfg_erase_sectors(1)) { - cli_print(cli, "Erasing first sector in FPGA config memory failed"); - return CLI_ERROR; - } - - cli_print(cli, "Erased FPGA config memory"); - fpgacfg_access_control(ALLOW_FPGA); - - return CLI_OK; -} - -int cmd_fpga_reset(struct cli_def *cli, const char *command, char *argv[], int argc) -{ - fpgacfg_access_control(ALLOW_FPGA); - fpgacfg_reset_fpga(RESET_FULL); - cli_print(cli, "FPGA has been reset"); - - return CLI_OK; -} - -int cmd_fpga_reset_registers(struct cli_def *cli, const char *command, char *argv[], int argc) -{ - fpgacfg_access_control(ALLOW_FPGA); - fpgacfg_reset_fpga(RESET_REGISTERS); - cli_print(cli, "FPGA registers have been reset"); - - return CLI_OK; -} - int cmd_reboot(struct cli_def *cli, const char *command, char *argv[], int argc) { cli_print(cli, "\n\n\nRebooting\n\n\n"); @@ -372,22 +255,6 @@ void configure_cli_show(struct cli_def *cli) cli_command_node(show_keystore, data, "Show the first page of the keystore memory"); } -void configure_cli_fpga(struct cli_def *cli) -{ - /* fpga */ - cli_command_root(fpga); - /* fpga reset */ - cli_command_node(fpga, reset, "Reset FPGA (config reset)"); - /* fpga reset registers */ - cli_command_node(fpga_reset, registers, "Reset FPGA registers (soft reset)"); - - cli_command_branch(fpga, bitstream); - /* fpga bitstream upload */ - cli_command_node(fpga_bitstream, upload, "Upload new FPGA bitstream"); - /* fpga bitstream erase */ - cli_command_node(fpga_bitstream, erase, "Erase FPGA config memory"); -} - void configure_cli_test(struct cli_def *cli) { /* test */ |