Only the HSM project needs the RTOS; most of the test projects can use the STM32 HAL code directly.

2 files changed, 1 insertions, 223 deletions

diff --git a/projects/bootloader/Makefile b/projects/bootloader/Makefile
index fe75849..a63d29c 100644
--- a/projects/bootloader/Makefile
+++ b/projects/bootloader/Makefile
@@ -10,9 +10,7 @@ BOARD_OBJS = \
 	$(BOARD_DIR)/system_stm32f4xx.o \
 	$(BOARD_DIR)/stm32f4xx_hal_msp.o \
 	./startup_stm32f429xx.o \
-	./stm32f4xx_it.o
-
-LIBS = $(MBED_DIR)/libstmf4.a
+	$(BOARD_DIR)/stm32f4xx_it.o
 
 all: $(PROG:=.elf)
 
diff --git a/projects/bootloader/stm32f4xx_it.c b/projects/bootloader/stm32f4xx_it.c
deleted file mode 100644
index 7aed16b..0000000
--- a/projects/bootloader/stm32f4xx_it.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/**
-******************************************************************************
-* @file    GPIO/GPIO_IOToggle/Src/stm32f4xx_it.c
-* @author  MCD Application Team
-* @version V1.0.1
-* @date    26-February-2014
-* @brief   Main Interrupt Service Routines.
-*          This file provides template for all exceptions handler and
-*          peripherals interrupt service routine.
-******************************************************************************
-* @attention
-*
-* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*   1. Redistributions of source code must retain the above copyright notice,
-*      this list of conditions and the following disclaimer.
-*   2. Redistributions in binary form must reproduce the above copyright notice,
-*      this list of conditions and the following disclaimer in the documentation
-*      and/or other materials provided with the distribution.
-*   3. Neither the name of STMicroelectronics nor the names of its contributors
-*      may be used to endorse or promote products derived from this software
-*      without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************
-*/
-
-#include "stm-init.h"
-#include "stm-uart.h"
-
-/******************************************************************************/
-/*            Cortex-M4 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/*
- * We define these to make debugging easier, because otherwise gdb reports
- * HardFault_Handler as WWDG_IRQHandler.
- */
-
-/**
- * @brief   This function handles NMI exception.
- * @param  None
- * @retval None
- */
-void NMI_Handler(void)
-{
-}
-
-/**
- * @brief  This function handles Hard Fault exception.
- * @param  None
- * @retval None
- */
-void HardFault_Handler(void)
-{
-    /* Go to infinite loop when Hard Fault exception occurs */
-    while (1) { ; }
-}
-
-/**
- * @brief  This function handles Memory Manage exception.
- * @param  None
- * @retval None
- */
-void MemManage_Handler(void)
-{
-    /* Go to infinite loop when Memory Manage exception occurs */
-    while (1) { ; }
-}
-
-/**
- * @brief  This function handles Bus Fault exception.
- * @param  None
- * @retval None
- */
-void BusFault_Handler(void)
-{
-    /* Go to infinite loop when Bus Fault exception occurs */
-    while (1) { ; }
-}
-
-/**
- * @brief  This function handles Usage Fault exception.
- * @param  None
- * @retval None
- */
-void UsageFault_Handler(void)
-{
-    /* Go to infinite loop when Usage Fault exception occurs */
-    while (1) { ; }
-}
-
-
-/**
- * @brief  This function handles SVCall exception.
- * @param  None
- * @retval None
- */
-void SVC_Handler(void)
-{
-}
-
-/**
- * @brief  This function handles Debug Monitor exception.
- * @param  None
- * @retval None
- */
-void DebugMon_Handler(void)
-{
-}
-
-/**
- * @brief  This function handles PendSVC exception.
- * @param  None
- * @retval None
- */
-void PendSV_Handler(void)
-{
-}
-
-/**
- * @brief  This function handles SysTick Handler.
- * @param  None
- * @retval None
- */
-void SysTick_Handler(void)
-{
-    HAL_IncTick();
-}
-
-/******************************************************************************/
-/*                 STM32F4xx Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f4xx.s).                                               */
-/******************************************************************************/
-
-/**
-* @brief This function handles DMA1 stream5 global interrupt.
-*/
-void DMA1_Stream5_IRQHandler(void)
-{
-    HAL_DMA_IRQHandler(&hdma_usart_user_rx);
-}
-
-/**
-* @brief This function handles DMA2 stream2 global interrupt.
-*/
-void DMA2_Stream2_IRQHandler(void)
-{
-    HAL_DMA_IRQHandler(&hdma_usart_mgmt_rx);
-}
-
-/**
- * @brief  This function handles UART interrupt request.
- * @param  None
- * @retval None
- * @Note   HAL_UART_IRQHandler will call HAL_UART_RxCpltCallback in main.c.
- */
-void USART1_IRQHandler(void)
-{
-    HAL_UART_IRQHandler(&huart_mgmt);
-}
-
-/**
- * @brief  This function handles UART interrupt request.
- * @param  None
- * @retval None
- * @Note   HAL_UART_IRQHandler will call HAL_UART_RxCpltCallback in main.c.
- */
-void USART2_IRQHandler(void)
-{
-    HAL_UART_IRQHandler(&huart_user);
-}
-
-void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
-{
-    extern void HAL_UART1_RxCpltCallback(UART_HandleTypeDef *huart);
-    extern void HAL_UART2_RxCpltCallback(UART_HandleTypeDef *huart);
-
-    if (huart->Instance == USART1)
-        HAL_UART1_RxCpltCallback(huart);
-
-    else if (huart->Instance == USART2)
-        HAL_UART2_RxCpltCallback(huart);
-}
-
-/**
-  * @brief  Rx Transfer completed callbacks.
-  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
-  *                the configuration information for the specified UART module.
-  * @retval None
-  */
-__weak void HAL_UART1_RxCpltCallback(UART_HandleTypeDef *huart)
-{
-  /* NOTE: This function Should not be modified, when the callback is needed,
-           the HAL_UART_TxCpltCallback could be implemented in the user file
-   */
-}
-
-__weak void HAL_UART2_RxCpltCallback(UART_HandleTypeDef *huart)
-{
-  /* NOTE: This function Should not be modified, when the callback is needed,
-           the HAL_UART_TxCpltCallback could be implemented in the user file
-   */
-}
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/