Based on user/ft/stm32-dev-bridge, without the project-specific build

directories (and duplicated code).

1 files changed, 198 insertions, 0 deletions

diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c
new file mode 100644
index 0000000..46f0ad3
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c
@@ -0,0 +1,198 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pcd_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   PCD HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the USB Peripheral Controller:
+  *           + Extended features functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PCDEx PCDEx
+  * @brief PCD Extended HAL module driver
+  * @{
+  */
+#ifdef HAL_PCD_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup PCDEx_Exported_Functions PCD Extended Exported Functions
+  * @{
+  */
+
+/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+  * @brief    PCDEx control functions
+  *
+@verbatim
+ ===============================================================================
+                 ##### Extended features functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Update FIFO configuration
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Set Tx FIFO
+  * @param  hpcd: PCD handle
+  * @param  fifo: The number of Tx fifo
+  * @param  size: Fifo size
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
+{
+  uint8_t i = 0;
+  uint32_t Tx_Offset = 0;
+
+  /*  TXn min size = 16 words. (n  : Transmit FIFO index)
+      When a TxFIFO is not used, the Configuration should be as follows:
+          case 1 :  n > m    and Txn is not used    (n,m  : Transmit FIFO indexes)
+         --> Txm can use the space allocated for Txn.
+         case2  :  n < m    and Txn is not used    (n,m  : Transmit FIFO indexes)
+         --> Txn should be configured with the minimum space of 16 words
+     The FIFO is used optimally when used TxFIFOs are allocated in the top
+         of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
+     When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
+
+  Tx_Offset = hpcd->Instance->GRXFSIZ;
+
+  if(fifo == 0)
+  {
+    hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((uint32_t)size << 16) | Tx_Offset);
+  }
+  else
+  {
+    Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16;
+    for (i = 0; i < (fifo - 1); i++)
+    {
+      Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16);
+    }
+
+    /* Multiply Tx_Size by 2 to get higher performance */
+    hpcd->Instance->DIEPTXF[fifo - 1] = (uint32_t)(((uint32_t)size << 16) | Tx_Offset);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set Rx FIFO
+  * @param  hpcd: PCD handle
+  * @param  size: Size of Rx fifo
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
+{
+  hpcd->Instance->GRXFSIZ = size;
+
+  return HAL_OK;
+}
+
+#if defined(STM32F446xx)
+/**
+  * @brief  Activate LPM feature
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+  hpcd->lpm_active = ENABLE;
+  hpcd->LPM_State = LPM_L0;
+  USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM;
+  USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivate LPM feature.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+  hpcd->lpm_active = DISABLE;
+  USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM;
+  USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Send LPM message to user layer callback.
+  * @param  hpcd: PCD handle
+  * @param  msg: LPM message
+  * @retval HAL status
+  */
+__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
+{
+}
+#endif /* STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PCD_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/