Based on user/ft/stm32-dev-bridge, without the project-specific build

directories (and duplicated code).

1 files changed, 908 insertions, 0 deletions

diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h
new file mode 100644
index 0000000..493cd93
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h
@@ -0,0 +1,908 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_sdmmc.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of SDMMC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_SDMMC_H
+#define __STM32F4xx_LL_SDMMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_Driver
+  * @{
+  */
+
+/** @addtogroup SDMMC_LL
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types
+  * @{
+  */
+
+/**
+  * @brief  SDMMC Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t ClockEdge;            /*!< Specifies the clock transition on which the bit capture is made.
+                                      This parameter can be a value of @ref SDIO_Clock_Edge                 */
+
+  uint32_t ClockBypass;          /*!< Specifies whether the SDIO Clock divider bypass is
+                                      enabled or disabled.
+                                      This parameter can be a value of @ref SDIO_Clock_Bypass               */
+
+  uint32_t ClockPowerSave;       /*!< Specifies whether SDIO Clock output is enabled or
+                                      disabled when the bus is idle.
+                                      This parameter can be a value of @ref SDIO_Clock_Power_Save           */
+
+  uint32_t BusWide;              /*!< Specifies the SDIO bus width.
+                                      This parameter can be a value of @ref SDIO_Bus_Wide                   */
+
+  uint32_t HardwareFlowControl;  /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+                                      This parameter can be a value of @ref SDIO_Hardware_Flow_Control      */
+
+  uint32_t ClockDiv;             /*!< Specifies the clock frequency of the SDIO controller.
+                                      This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+}SDIO_InitTypeDef;
+
+
+/**
+  * @brief  SDIO Command Control structure
+  */
+typedef struct
+{
+  uint32_t Argument;            /*!< Specifies the SDIO command argument which is sent
+                                     to a card as part of a command message. If a command
+                                     contains an argument, it must be loaded into this register
+                                     before writing the command to the command register.              */
+
+  uint32_t CmdIndex;            /*!< Specifies the SDIO command index. It must be Min_Data = 0 and
+                                     Max_Data = 64                                                    */
+
+  uint32_t Response;            /*!< Specifies the SDIO response type.
+                                     This parameter can be a value of @ref SDIO_Response_Type         */
+
+  uint32_t WaitForInterrupt;    /*!< Specifies whether SDIO wait for interrupt request is
+                                     enabled or disabled.
+                                     This parameter can be a value of @ref SDIO_Wait_Interrupt_State  */
+
+  uint32_t CPSM;                /*!< Specifies whether SDIO Command path state machine (CPSM)
+                                     is enabled or disabled.
+                                     This parameter can be a value of @ref SDIO_CPSM_State            */
+}SDIO_CmdInitTypeDef;
+
+
+/**
+  * @brief  SDIO Data Control structure
+  */
+typedef struct
+{
+  uint32_t DataTimeOut;         /*!< Specifies the data timeout period in card bus clock periods.  */
+
+  uint32_t DataLength;          /*!< Specifies the number of data bytes to be transferred.         */
+
+  uint32_t DataBlockSize;       /*!< Specifies the data block size for block transfer.
+                                     This parameter can be a value of @ref SDIO_Data_Block_Size    */
+
+  uint32_t TransferDir;         /*!< Specifies the data transfer direction, whether the transfer
+                                     is a read or write.
+                                     This parameter can be a value of @ref SDIO_Transfer_Direction */
+
+  uint32_t TransferMode;        /*!< Specifies whether data transfer is in stream or block mode.
+                                     This parameter can be a value of @ref SDIO_Transfer_Type      */
+
+  uint32_t DPSM;                /*!< Specifies whether SDIO Data path state machine (DPSM)
+                                     is enabled or disabled.
+                                     This parameter can be a value of @ref SDIO_DPSM_State         */
+}SDIO_DataInitTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants
+  * @{
+  */
+
+/** @defgroup SDIO_Clock_Edge Clock Edge
+  * @{
+  */
+#define SDIO_CLOCK_EDGE_RISING               ((uint32_t)0x00000000)
+#define SDIO_CLOCK_EDGE_FALLING              SDIO_CLKCR_NEGEDGE
+
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \
+                                  ((EDGE) == SDIO_CLOCK_EDGE_FALLING))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Clock_Bypass Clock Bypass
+  * @{
+  */
+#define SDIO_CLOCK_BYPASS_DISABLE             ((uint32_t)0x00000000)
+#define SDIO_CLOCK_BYPASS_ENABLE              SDIO_CLKCR_BYPASS
+
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \
+                                      ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Clock_Power_Save Clock Power Saving
+  * @{
+  */
+#define SDIO_CLOCK_POWER_SAVE_DISABLE         ((uint32_t)0x00000000)
+#define SDIO_CLOCK_POWER_SAVE_ENABLE          SDIO_CLKCR_PWRSAV
+
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \
+                                        ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Bus_Wide Bus Width
+  * @{
+  */
+#define SDIO_BUS_WIDE_1B                      ((uint32_t)0x00000000)
+#define SDIO_BUS_WIDE_4B                      SDIO_CLKCR_WIDBUS_0
+#define SDIO_BUS_WIDE_8B                      SDIO_CLKCR_WIDBUS_1
+
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \
+                                ((WIDE) == SDIO_BUS_WIDE_4B) || \
+                                ((WIDE) == SDIO_BUS_WIDE_8B))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Hardware_Flow_Control Hardware Flow Control
+  * @{
+  */
+#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE    ((uint32_t)0x00000000)
+#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE     SDIO_CLKCR_HWFC_EN
+
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \
+                                                ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Clock_Division Clock Division
+  * @{
+  */
+#define IS_SDIO_CLKDIV(DIV)   ((DIV) <= 0xFF)
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Command_Index Command Index
+  * @{
+  */
+#define IS_SDIO_CMD_INDEX(INDEX)            ((INDEX) < 0x40)
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Response_Type Response Type
+  * @{
+  */
+#define SDIO_RESPONSE_NO                    ((uint32_t)0x00000000)
+#define SDIO_RESPONSE_SHORT                 SDIO_CMD_WAITRESP_0
+#define SDIO_RESPONSE_LONG                  SDIO_CMD_WAITRESP
+
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO)    || \
+                                    ((RESPONSE) == SDIO_RESPONSE_SHORT) || \
+                                    ((RESPONSE) == SDIO_RESPONSE_LONG))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Wait_Interrupt_State Wait Interrupt
+  * @{
+  */
+#define SDIO_WAIT_NO                        ((uint32_t)0x00000000)
+#define SDIO_WAIT_IT                        SDIO_CMD_WAITINT
+#define SDIO_WAIT_PEND                      SDIO_CMD_WAITPEND
+
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \
+                            ((WAIT) == SDIO_WAIT_IT) || \
+                            ((WAIT) == SDIO_WAIT_PEND))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_CPSM_State CPSM State
+  * @{
+  */
+#define SDIO_CPSM_DISABLE                   ((uint32_t)0x00000000)
+#define SDIO_CPSM_ENABLE                    SDIO_CMD_CPSMEN
+
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \
+                            ((CPSM) == SDIO_CPSM_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Response_Registers Response Register
+  * @{
+  */
+#define SDIO_RESP1                          ((uint32_t)0x00000000)
+#define SDIO_RESP2                          ((uint32_t)0x00000004)
+#define SDIO_RESP3                          ((uint32_t)0x00000008)
+#define SDIO_RESP4                          ((uint32_t)0x0000000C)
+
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \
+                            ((RESP) == SDIO_RESP2) || \
+                            ((RESP) == SDIO_RESP3) || \
+                            ((RESP) == SDIO_RESP4))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Data_Length Data Lenght
+  * @{
+  */
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Data_Block_Size Data Block Size
+  * @{
+  */
+#define SDIO_DATABLOCK_SIZE_1B               ((uint32_t)0x00000000)
+#define SDIO_DATABLOCK_SIZE_2B               SDIO_DCTRL_DBLOCKSIZE_0
+#define SDIO_DATABLOCK_SIZE_4B               SDIO_DCTRL_DBLOCKSIZE_1
+#define SDIO_DATABLOCK_SIZE_8B               ((uint32_t)0x00000030)
+#define SDIO_DATABLOCK_SIZE_16B              SDIO_DCTRL_DBLOCKSIZE_2
+#define SDIO_DATABLOCK_SIZE_32B              ((uint32_t)0x00000050)
+#define SDIO_DATABLOCK_SIZE_64B              ((uint32_t)0x00000060)
+#define SDIO_DATABLOCK_SIZE_128B             ((uint32_t)0x00000070)
+#define SDIO_DATABLOCK_SIZE_256B             SDIO_DCTRL_DBLOCKSIZE_3
+#define SDIO_DATABLOCK_SIZE_512B             ((uint32_t)0x00000090)
+#define SDIO_DATABLOCK_SIZE_1024B            ((uint32_t)0x000000A0)
+#define SDIO_DATABLOCK_SIZE_2048B            ((uint32_t)0x000000B0)
+#define SDIO_DATABLOCK_SIZE_4096B            ((uint32_t)0x000000C0)
+#define SDIO_DATABLOCK_SIZE_8192B            ((uint32_t)0x000000D0)
+#define SDIO_DATABLOCK_SIZE_16384B           ((uint32_t)0x000000E0)
+
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B)    || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_2B)    || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_4B)    || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_8B)    || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_16B)   || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_32B)   || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_64B)   || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_128B)  || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_256B)  || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_512B)  || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \
+                                  ((SIZE) == SDIO_DATABLOCK_SIZE_16384B))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Transfer_Direction Transfer Direction
+  * @{
+  */
+#define SDIO_TRANSFER_DIR_TO_CARD            ((uint32_t)0x00000000)
+#define SDIO_TRANSFER_DIR_TO_SDIO            SDIO_DCTRL_DTDIR
+
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \
+                                   ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Transfer_Type Transfer Type
+  * @{
+  */
+#define SDIO_TRANSFER_MODE_BLOCK             ((uint32_t)0x00000000)
+#define SDIO_TRANSFER_MODE_STREAM            SDIO_DCTRL_DTMODE
+
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \
+                                     ((MODE) == SDIO_TRANSFER_MODE_STREAM))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_DPSM_State DPSM State
+  * @{
+  */
+#define SDIO_DPSM_DISABLE                    ((uint32_t)0x00000000)
+#define SDIO_DPSM_ENABLE                     SDIO_DCTRL_DTEN
+
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\
+                            ((DPSM) == SDIO_DPSM_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Read_Wait_Mode Read Wait Mode
+  * @{
+  */
+#define SDIO_READ_WAIT_MODE_DATA2             ((uint32_t)0x00000000)
+#define SDIO_READ_WAIT_MODE_CLK               ((uint32_t)0x00000001)
+
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \
+                                     ((MODE) == SDIO_READ_WAIT_MODE_DATA2))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Interrupt_sources Interrupt Sources
+  * @{
+  */
+#define SDIO_IT_CCRCFAIL                    SDIO_STA_CCRCFAIL
+#define SDIO_IT_DCRCFAIL                    SDIO_STA_DCRCFAIL
+#define SDIO_IT_CTIMEOUT                    SDIO_STA_CTIMEOUT
+#define SDIO_IT_DTIMEOUT                    SDIO_STA_DTIMEOUT
+#define SDIO_IT_TXUNDERR                    SDIO_STA_TXUNDERR
+#define SDIO_IT_RXOVERR                     SDIO_STA_RXOVERR
+#define SDIO_IT_CMDREND                     SDIO_STA_CMDREND
+#define SDIO_IT_CMDSENT                     SDIO_STA_CMDSENT
+#define SDIO_IT_DATAEND                     SDIO_STA_DATAEND
+#define SDIO_IT_STBITERR                    SDIO_STA_STBITERR
+#define SDIO_IT_DBCKEND                     SDIO_STA_DBCKEND
+#define SDIO_IT_CMDACT                      SDIO_STA_CMDACT
+#define SDIO_IT_TXACT                       SDIO_STA_TXACT
+#define SDIO_IT_RXACT                       SDIO_STA_RXACT
+#define SDIO_IT_TXFIFOHE                    SDIO_STA_TXFIFOHE
+#define SDIO_IT_RXFIFOHF                    SDIO_STA_RXFIFOHF
+#define SDIO_IT_TXFIFOF                     SDIO_STA_TXFIFOF
+#define SDIO_IT_RXFIFOF                     SDIO_STA_RXFIFOF
+#define SDIO_IT_TXFIFOE                     SDIO_STA_TXFIFOE
+#define SDIO_IT_RXFIFOE                     SDIO_STA_RXFIFOE
+#define SDIO_IT_TXDAVL                      SDIO_STA_TXDAVL
+#define SDIO_IT_RXDAVL                      SDIO_STA_RXDAVL
+#define SDIO_IT_SDIOIT                      SDIO_STA_SDIOIT
+#define SDIO_IT_CEATAEND                    SDIO_STA_CEATAEND
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Flags Flags
+  * @{
+  */
+#define SDIO_FLAG_CCRCFAIL                  SDIO_STA_CCRCFAIL
+#define SDIO_FLAG_DCRCFAIL                  SDIO_STA_DCRCFAIL
+#define SDIO_FLAG_CTIMEOUT                  SDIO_STA_CTIMEOUT
+#define SDIO_FLAG_DTIMEOUT                  SDIO_STA_DTIMEOUT
+#define SDIO_FLAG_TXUNDERR                  SDIO_STA_TXUNDERR
+#define SDIO_FLAG_RXOVERR                   SDIO_STA_RXOVERR
+#define SDIO_FLAG_CMDREND                   SDIO_STA_CMDREND
+#define SDIO_FLAG_CMDSENT                   SDIO_STA_CMDSENT
+#define SDIO_FLAG_DATAEND                   SDIO_STA_DATAEND
+#define SDIO_FLAG_STBITERR                  SDIO_STA_STBITERR
+#define SDIO_FLAG_DBCKEND                   SDIO_STA_DBCKEND
+#define SDIO_FLAG_CMDACT                    SDIO_STA_CMDACT
+#define SDIO_FLAG_TXACT                     SDIO_STA_TXACT
+#define SDIO_FLAG_RXACT                     SDIO_STA_RXACT
+#define SDIO_FLAG_TXFIFOHE                  SDIO_STA_TXFIFOHE
+#define SDIO_FLAG_RXFIFOHF                  SDIO_STA_RXFIFOHF
+#define SDIO_FLAG_TXFIFOF                   SDIO_STA_TXFIFOF
+#define SDIO_FLAG_RXFIFOF                   SDIO_STA_RXFIFOF
+#define SDIO_FLAG_TXFIFOE                   SDIO_STA_TXFIFOE
+#define SDIO_FLAG_RXFIFOE                   SDIO_STA_RXFIFOE
+#define SDIO_FLAG_TXDAVL                    SDIO_STA_TXDAVL
+#define SDIO_FLAG_RXDAVL                    SDIO_STA_RXDAVL
+#define SDIO_FLAG_SDIOIT                    SDIO_STA_SDIOIT
+#define SDIO_FLAG_CEATAEND                  SDIO_STA_CEATAEND
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros
+  * @{
+  */
+
+/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region
+  * @{
+  */
+/* ------------ SDIO registers bit address in the alias region -------------- */
+#define SDIO_OFFSET               (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET              (SDIO_OFFSET + 0x04)
+#define CLKEN_BITNUMBER           0x08
+#define CLKCR_CLKEN_BB            (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BITNUMBER * 4))
+
+/* --- CMD Register ---*/
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET                (SDIO_OFFSET + 0x0C)
+#define SDIOSUSPEND_BITNUMBER     0x0B
+#define CMD_SDIOSUSPEND_BB        (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BITNUMBER * 4))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BITNUMBER      0x0C
+#define CMD_ENCMDCOMPL_BB         (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BITNUMBER * 4))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BITNUMBER            0x0D
+#define CMD_NIEN_BB               (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BITNUMBER * 4))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BITNUMBER          0x0E
+#define CMD_ATACMD_BB             (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BITNUMBER * 4))
+
+/* --- DCTRL Register ---*/
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET              (SDIO_OFFSET + 0x2C)
+#define DMAEN_BITNUMBER           0x03
+#define DCTRL_DMAEN_BB            (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BITNUMBER * 4))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BITNUMBER         0x08
+#define DCTRL_RWSTART_BB          (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BITNUMBER * 4))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BITNUMBER          0x09
+#define DCTRL_RWSTOP_BB           (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BITNUMBER * 4))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BITNUMBER           0x0A
+#define DCTRL_RWMOD_BB            (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BITNUMBER * 4))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BITNUMBER          0x0B
+#define DCTRL_SDIOEN_BB           (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BITNUMBER * 4))
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions
+  * @brief SDMMC_LL registers bit address in the alias region
+  * @{
+  */
+
+/* ---------------------- SDIO registers bit mask --------------------------- */
+/* --- CLKCR Register ---*/
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK         ((uint32_t)(SDIO_CLKCR_CLKDIV  | SDIO_CLKCR_PWRSAV |\
+                                             SDIO_CLKCR_BYPASS  | SDIO_CLKCR_WIDBUS |\
+                                             SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN))
+
+/* --- PWRCTRL Register ---*/
+/* --- DCTRL Register ---*/
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK         ((uint32_t)(SDIO_DCTRL_DTEN    | SDIO_DCTRL_DTDIR |\
+                                             SDIO_DCTRL_DTMODE  | SDIO_DCTRL_DBLOCKSIZE))
+
+/* --- CMD Register ---*/
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK           ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\
+                                             SDIO_CMD_WAITINT  | SDIO_CMD_WAITPEND |\
+                                             SDIO_CMD_CPSMEN   | SDIO_CMD_SDIOSUSPEND))
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR           ((uint32_t)(SDIO_BASE + 0x14))
+
+/* SDIO Initialization Frequency (400KHz max) */
+#define SDIO_INIT_CLK_DIV ((uint8_t)0x76)
+
+/* SDIO Data Transfer Frequency (25MHz max) */
+#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0)
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration
+  * @brief macros to handle interrupts and specific clock configurations
+  * @{
+  */
+
+/**
+  * @brief  Enable the SDIO device.
+  * @retval None
+  */
+#define __SDIO_ENABLE()   (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE)
+
+/**
+  * @brief  Disable the SDIO device.
+  * @retval None
+  */
+#define __SDIO_DISABLE()   (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE)
+
+/**
+  * @brief  Enable the SDIO DMA transfer.
+  * @retval None
+  */
+#define __SDIO_DMA_ENABLE()   (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE)
+
+/**
+  * @brief  Disable the SDIO DMA transfer.
+  * @retval None
+  */
+#define __SDIO_DMA_DISABLE()   (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE)
+
+/**
+  * @brief  Enable the SDIO device interrupt.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled.
+  *         This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @retval None
+  */
+#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->MASK |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the SDIO device interrupt.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @retval None
+  */
+#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->MASK &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified SDIO flag is set or not.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __FLAG__: specifies the flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *            @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDACT:   Command transfer in progress
+  *            @arg SDIO_FLAG_TXACT:    Data transmit in progress
+  *            @arg SDIO_FLAG_RXACT:    Data receive in progress
+  *            @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+  *            @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+  *            @arg SDIO_FLAG_TXFIFOF:  Transmit FIFO full
+  *            @arg SDIO_FLAG_RXFIFOF:  Receive FIFO full
+  *            @arg SDIO_FLAG_TXFIFOE:  Transmit FIFO empty
+  *            @arg SDIO_FLAG_RXFIFOE:  Receive FIFO empty
+  *            @arg SDIO_FLAG_TXDAVL:   Data available in transmit FIFO
+  *            @arg SDIO_FLAG_RXDAVL:   Data available in receive FIFO
+  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  *            @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval The new state of SDIO_FLAG (SET or RESET).
+  */
+#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__)   (((__INSTANCE__)->STA &(__FLAG__)) != RESET)
+
+
+/**
+  * @brief  Clears the SDIO pending flags.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *            @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+  *            @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  *            @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval None
+  */
+#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__)   ((__INSTANCE__)->ICR = (__FLAG__))
+
+/**
+  * @brief  Checks whether the specified SDIO interrupt has occurred or not.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __INTERRUPT__: specifies the SDIO interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @retval The new state of SDIO_IT (SET or RESET).
+  */
+#define __SDIO_GET_IT  (__INSTANCE__, __INTERRUPT__)   (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Clears the SDIO's interrupt pending bits.
+  * @param  __INSTANCE__ : Pointer to SDIO register base
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDIO_IT_DATAEND:  Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+  *            @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+  *                                   bus mode interrupt
+  *            @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *            @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval None
+  */
+#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__)   ((__INSTANCE__)->ICR = (__INTERRUPT__))
+
+/**
+  * @brief  Enable Start the SD I/O Read Wait operation.
+  * @retval None
+  */
+#define __SDIO_START_READWAIT_ENABLE()   (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE)
+
+/**
+  * @brief  Disable Start the SD I/O Read Wait operations.
+  * @retval None
+  */
+#define __SDIO_START_READWAIT_DISABLE()   (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE)
+
+/**
+  * @brief  Enable Start the SD I/O Read Wait operation.
+  * @retval None
+  */
+#define __SDIO_STOP_READWAIT_ENABLE()   (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE)
+
+/**
+  * @brief  Disable Stop the SD I/O Read Wait operations.
+  * @retval None
+  */
+#define __SDIO_STOP_READWAIT_DISABLE()   (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE)
+
+/**
+  * @brief  Enable the SD I/O Mode Operation.
+  * @retval None
+  */
+#define __SDIO_OPERATION_ENABLE()   (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE)
+
+/**
+  * @brief  Disable the SD I/O Mode Operation.
+  * @retval None
+  */
+#define __SDIO_OPERATION_DISABLE()   (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE)
+
+/**
+  * @brief  Enable the SD I/O Suspend command sending.
+  * @retval None
+  */
+#define __SDIO_SUSPEND_CMD_ENABLE()   (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE)
+
+/**
+  * @brief  Disable the SD I/O Suspend command sending.
+  * @retval None
+  */
+#define __SDIO_SUSPEND_CMD_DISABLE()   (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE)
+
+#if !defined(STM32F446xx)
+/**
+  * @brief  Enable the command completion signal.
+  * @retval None
+  */
+#define __SDIO_CEATA_CMD_COMPLETION_ENABLE()   (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE)
+
+/**
+  * @brief  Disable the command completion signal.
+  * @retval None
+  */
+#define __SDIO_CEATA_CMD_COMPLETION_DISABLE()   (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE)
+
+/**
+  * @brief  Enable the CE-ATA interrupt.
+  * @retval None
+  */
+#define __SDIO_CEATA_ENABLE_IT()   (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0)
+
+/**
+  * @brief  Disable the CE-ATA interrupt.
+  * @retval None
+  */
+#define __SDIO_CEATA_DISABLE_IT()   (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1)
+
+/**
+  * @brief  Enable send CE-ATA command (CMD61).
+  * @retval None
+  */
+#define __SDIO_CEATA_SENDCMD_ENABLE()   (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE)
+
+/**
+  * @brief  Disable send CE-ATA command (CMD61).
+  * @retval None
+  */
+#define __SDIO_CEATA_SENDCMD_DISABLE()   (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE)
+#endif /* !defined(STM32F446xx)  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDMMC_LL_Exported_Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  **********************************/
+/** @addtogroup HAL_SDMMC_LL_Group1
+  * @{
+  */
+HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init);
+/**
+  * @}
+  */
+
+/* I/O operation functions  *****************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group2
+  * @{
+  */
+/* Blocking mode: Polling */
+uint32_t          SDIO_ReadFIFO(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  ************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group3
+  * @{
+  */
+HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx);
+uint32_t          SDIO_GetPowerState(SDIO_TypeDef *SDIOx);
+
+/* Command path state machine (CPSM) management functions */
+HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+uint8_t           SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx);
+uint32_t          SDIO_GetResponse(uint32_t SDIO_RESP);
+
+/* Data path state machine (DPSM) management functions */
+HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t          SDIO_GetDataCounter(SDIO_TypeDef *SDIOx);
+uint32_t          SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx);
+
+/* SDIO IO Cards mode management functions */
+HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_SDMMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/