aes_keywrap.c

/*
 * hal_io_fmc.c
 * ------------
 * This module contains common code to talk to the FPGA over the FMC bus.
 *
 * Author: Paul Selkirk
 * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 * - Redistributions of source code must retain the above copyright notice,
 *   this list of conditions and the following disclaimer.
 *
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 *
 * - Neither the name of the NORDUnet nor the names of its contributors may
 *   be used to endorse or promote products derived from this software
 *   without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <stdio.h>
#include <stdint.h>

#include "stm-fmc.h"
#include "hal.h"
#include "hal_internal.h"

static int debug = 0;
static int inited = 0;

#ifndef FMC_IO_TIMEOUT
#define FMC_IO_TIMEOUT  100000000
#endif

/* not available in arm-none-eabi libc */
#ifdef __ARMEL__    // Little endian
static inline uint32_t htonl(uint32_t w)
{
  return
    ((w & 0x000000ff) << 24) +
    ((w & 0x0000ff00) << 8) +
    ((w & 0x00ff0000) >> 8) +
    ((w & 0xff000000) >> 24);
}
#else               // Big endian
#define htonl(x) (x)
#endif
#define ntohl htonl

static hal_error_t init(void)
{
  if (!inited) {
    fmc_init();
    inited = 1;
  }
  return HAL_OK;
}

/* Translate cryptech register number to FMC address.
 *
 * register number format:
 * 3 bits segment selector
 * 5 bits core selector (6 bits in native eim)
 * 8 bits register selector
 *
 * sss ccccc rrrrrrrr => sss 0 ccccc rrrrrrrr 00
 */
static hal_addr_t fmc_offset(hal_addr_t offset)
{
  return ((offset & ~0x1fff) << 3) + ((offset & 0x1fff) << 2);
}

void hal_io_set_debug(int onoff)
{
  debug = onoff;
}

static void dump(char *label, const uint8_t *buf, size_t len)
{
  if (debug) {
    size_t i;
    printf("%s [", label);
    for (i = 0; i < len; ++i)
      printf(" %02x", buf[i]);
    printf(" ]\n");
  }
}

hal_error_t hal_io_write(const hal_core_t *core, hal_addr_t offset, const uint8_t *buf, size_t len)
{
  hal_error_t err;

  if (core == NULL)
    return HAL_ERROR_CORE_NOT_FOUND;

  if (len % 4 != 0)
    return HAL_ERROR_IO_BAD_COUNT;

  if ((err = init()) != HAL_OK)
    return err;

  dump("write ", buf, len);

  offset = fmc_offset(offset + hal_core_base(core));
  for (; len > 0; offset += 4, buf += 4, len -= 4) {
    uint32_t val;
    val = htonl(*(uint32_t *)buf);
    fmc_write_32(offset, &val);
  }

  return HAL_OK;
}

hal_error_t hal_io_read(const hal_core_t *core, hal_addr_t offset, uint8_t *buf, size_t len)
{
  uint8_t *rbuf = buf;
  int rlen = len;
  hal_error_t err;

  if (core == NULL)
    return HAL_ERROR_CORE_NOT_FOUND;

  if (len % 4 != 0)
    return HAL_ERROR_IO_BAD_COUNT;

  if ((err = init()) != HAL_OK)
    return err;

  offset = fmc_offset(offset + hal_core_base(core));
  for (; rlen > 0; offset += 4, rbuf += 4, rlen -= 4) {
    uint32_t val;
    fmc_read_32(offset, &val);
    *(uint32_t *)rbuf = ntohl(val);
  }

  dump("read  ", buf, len);

  return HAL_OK;
}

hal_error_t hal_io_init(const hal_core_t *core)
{
  uint8_t buf[4] = { 0, 0, 0, CTRL_INIT };
  return hal_io_write(core, ADDR_CTRL, buf, sizeof(buf));
}

hal_error_t hal_io_next(const hal_core_t *core)
{
  uint8_t buf[4] = { 0, 0, 0, CTRL_NEXT };
  return hal_io_write(core, ADDR_CTRL, buf, sizeof(buf));
}

hal_error_t hal_io_wait(const hal_core_t *core, uint8_t status, int *count)
{
  hal_error_t err;
  uint8_t buf[4];
  int i;

  for (i = 1; ; ++i) {

    if (count && (*count > 0) && (i >= *count))
      return HAL_ERROR_IO_TIMEOUT;

    if ((err = hal_io_read(core, ADDR_STATUS, buf, sizeof(buf))) != HAL_OK)
      return err;

    if ((buf[3] & status) != 0) {
      if (count)
        *count = i;
      return HAL_OK;
    }
  }
}

hal_error_t hal_io_wait_ready(const hal_core_t *core)
{
  int limit = FMC_IO_TIMEOUT;
  return hal_io_wait(core, STATUS_READY, &limit);
}

hal_error_t hal_io_wait_valid(const hal_core_t *core)
{
  int limit = FMC_IO_TIMEOUT;
  return hal_io_wait(core, STATUS_VALID, &limit);
}

/*
 * Local variables:
 * indent-tabs-mode: nil
 * c-basic-offset: 2
 * End:
 */
Age	Commit message (Expand)	Author
2015-12-23	RPC interface to TRNG and (incomplete) PIN code.	Rob Austein
2015-12-13	whack copyrights	Paul Selkirk
2015-11-13	Merge branch 'config_core_selector'	Paul Selkirk
2015-10-29	Remove unused includes.	Paul Selkirk
2015-10-04	Whack libhal API to use current configure_core_selector mechanism.	Rob Austein
2015-06-21	libcryptech -> libhal, doh.	Rob Austein
2015-06-04	Disable HMAC-SHA-384 tests as neither my implementation nor PyCrypto	Rob Austein
2015-05-24	Typing "!" when one meant "~" has interesting effects when bit masking.	Rob Austein
2015-05-23	Guess it might help to write the config value to the AES core after	Rob Austein
2015-05-21	Add test harness: no useful tests yet, just the framework.	Rob Austein
2015-05-20	Add AES Key Wrap using Cryptech AES core.	Rob Austein