From a3b7050c53a27d4cfeb350fb86e738f623e99e0c Mon Sep 17 00:00:00 2001 From: Rob Austein Date: Sun, 21 Jun 2015 23:08:51 -0400 Subject: libcryptech -> libhal, doh. --- cryptech.h | 673 ------------------------------------------------------------- 1 file changed, 673 deletions(-) delete mode 100644 cryptech.h (limited to 'cryptech.h') diff --git a/cryptech.h b/cryptech.h deleted file mode 100644 index dba9f31..0000000 --- a/cryptech.h +++ /dev/null @@ -1,673 +0,0 @@ -/* - * cryptech.h - * ---------- - * Memory map, access functions, and HAL for Cryptech cores. - * - * Authors: Joachim Strombergson, Paul Selkirk, Rob Austein - * Copyright (c) 2015, NORDUnet A/S All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * - Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * - Neither the name of the NORDUnet nor the names of its contributors may - * be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A - * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED - * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * Each Cryptech core has a set of 4-byte registers, which are accessed - * through a 16-bit address. The address space is divided as follows: - * 3 bits segment selector | up to 8 segments - * 5 bits core selector | up to 32 cores/segment (see note below) - * 8 bits register selector | up to 256 registers/core (see modexp below) - * - * i.e, the address is structured as: - * sss ccccc rrrrrrrr - * - * The I2C and UART communication channels use this 16-bit address format - * directly in their read and write commands. - * - * The EIM communications channel translates this 16-bit address into a - * 32-bit memory-mapped address in the range 0x08000000..807FFFF: - * 00001000000000 sss 0 ccccc rrrrrrrr 00 - * - * EIM, as implemented on the Novena, uses a 19-bit address space: - * Bits 18..16 are the semgent selector. - * Bits 15..10 are the core selector. - * Bits 9..2 are the register selector. - * Bits 1..0 are zero, because reads and writes are always word aligned. - * - * Note that EIM can support 64 cores per segment, but we sacrifice one bit - * in order to map it into a 16-bit address space. - */ - -#ifndef _CRYPTECH_H_ -#define _CRYPTECH_H_ - - -/* - * Default sizes. - */ -#define CORE_SIZE (0x100) -#define SEGMENT_SIZE (0x20 * CORE_SIZE) - - -/* - * Segments. - */ -#define SEGMENT_OFFSET_GLOBALS (0 * SEGMENT_SIZE) -#define SEGMENT_OFFSET_HASHES (1 * SEGMENT_SIZE) -#define SEGMENT_OFFSET_RNGS (2 * SEGMENT_SIZE) -#define SEGMENT_OFFSET_CIPHERS (3 * SEGMENT_SIZE) -#define SEGMENT_OFFSET_MATH (4 * SEGMENT_SIZE) - - -/* - * Addresses and codes common to all cores. - */ -#define ADDR_NAME0 (0x00) -#define ADDR_NAME1 (0x01) -#define ADDR_VERSION (0x02) -#define ADDR_CTRL (0x08) -#define CTRL_INIT (1) -#define CTRL_NEXT (2) -#define ADDR_STATUS (0x09) -#define STATUS_READY (1) -#define STATUS_VALID (2) - - -/* A handy macro from cryptlib */ -#ifndef bitsToBytes -#define bitsToBytes(x) (x / 8) -#endif - - -/* - * Board segment. - * Board-level registers and communication channel registers. - */ -#define BOARD_ADDR_BASE (SEGMENT_OFFSET_GLOBALS + (0 * CORE_SIZE)) -#define BOARD_ADDR_NAME0 (BOARD_ADDR_BASE + ADDR_NAME0) -#define BOARD_ADDR_NAME1 (BOARD_ADDR_BASE + ADDR_NAME1) -#define BOARD_ADDR_VERSION (BOARD_ADDR_BASE + ADDR_VERSION) -#define BOARD_ADDR_DUMMY (BOARD_ADDR_BASE + 0xFF) - -#define COMM_ADDR_BASE (SEGMENT_OFFSET_GLOBALS + (1 * CORE_SIZE)) -#define COMM_ADDR_NAME0 (COMM_ADDR_BASE + ADDR_NAME0) -#define COMM_ADDR_NAME1 (COMM_ADDR_BASE + ADDR_NAME1) -#define COMM_ADDR_VERSION (COMM_ADDR_BASE + ADDR_VERSION) - -/* Current name and version values */ -#define NOVENA_BOARD_NAME0 "PVT1" -#define NOVENA_BOARD_NAME1 " " -#define NOVENA_BOARD_VERSION "0.10" - -#define EIM_INTERFACE_NAME0 "eim " -#define EIM_INTERFACE_NAME1 " " -#define EIM_INTERFACE_VERSION "0.10" - -#define I2C_INTERFACE_NAME0 "i2c " -#define I2C_INTERFACE_NAME1 " " -#define I2C_INTERFACE_VERSION "0.10" - - -/* - * Hashes segment. - */ - -/* Addresses common to all hash cores */ -#define ADDR_BLOCK (0x10) -#define ADDR_DIGEST (0x20) /* except SHA512 */ - -/* Addresses and codes for the specific hash cores */ -#define SHA1_ADDR_BASE (SEGMENT_OFFSET_HASHES + (0 * CORE_SIZE)) -#define SHA1_ADDR_NAME0 (SHA1_ADDR_BASE + ADDR_NAME0) -#define SHA1_ADDR_NAME1 (SHA1_ADDR_BASE + ADDR_NAME1) -#define SHA1_ADDR_VERSION (SHA1_ADDR_BASE + ADDR_VERSION) -#define SHA1_ADDR_CTRL (SHA1_ADDR_BASE + ADDR_CTRL) -#define SHA1_ADDR_STATUS (SHA1_ADDR_BASE + ADDR_STATUS) -#define SHA1_ADDR_BLOCK (SHA1_ADDR_BASE + ADDR_BLOCK) -#define SHA1_ADDR_DIGEST (SHA1_ADDR_BASE + ADDR_DIGEST) -#define SHA1_BLOCK_LEN bitsToBytes(512) -#define SHA1_LENGTH_LEN bitsToBytes(64) -#define SHA1_DIGEST_LEN bitsToBytes(160) - -#define SHA256_ADDR_BASE (SEGMENT_OFFSET_HASHES + (1 * CORE_SIZE)) -#define SHA256_ADDR_NAME0 (SHA256_ADDR_BASE + ADDR_NAME0) -#define SHA256_ADDR_NAME1 (SHA256_ADDR_BASE + ADDR_NAME1) -#define SHA256_ADDR_VERSION (SHA256_ADDR_BASE + ADDR_VERSION) -#define SHA256_ADDR_CTRL (SHA256_ADDR_BASE + ADDR_CTRL) -#define SHA256_ADDR_STATUS (SHA256_ADDR_BASE + ADDR_STATUS) -#define SHA256_ADDR_BLOCK (SHA256_ADDR_BASE + ADDR_BLOCK) -#define SHA256_ADDR_DIGEST (SHA256_ADDR_BASE + ADDR_DIGEST) -#define SHA256_BLOCK_LEN bitsToBytes(512) -#define SHA256_LENGTH_LEN bitsToBytes(64) -#define SHA256_DIGEST_LEN bitsToBytes(256) - -#define SHA512_ADDR_BASE (SEGMENT_OFFSET_HASHES + (2 * CORE_SIZE)) -#define SHA512_ADDR_NAME0 (SHA512_ADDR_BASE + ADDR_NAME0) -#define SHA512_ADDR_NAME1 (SHA512_ADDR_BASE + ADDR_NAME1) -#define SHA512_ADDR_VERSION (SHA512_ADDR_BASE + ADDR_VERSION) -#define SHA512_ADDR_CTRL (SHA512_ADDR_BASE + ADDR_CTRL) -#define SHA512_ADDR_STATUS (SHA512_ADDR_BASE + ADDR_STATUS) -#define SHA512_ADDR_BLOCK (SHA512_ADDR_BASE + ADDR_BLOCK) -#define SHA512_ADDR_DIGEST (SHA512_ADDR_BASE + 0x40) -#define SHA512_BLOCK_LEN bitsToBytes(1024) -#define SHA512_LENGTH_LEN bitsToBytes(128) -#define SHA512_224_DIGEST_LEN bitsToBytes(224) -#define SHA512_256_DIGEST_LEN bitsToBytes(256) -#define SHA384_DIGEST_LEN bitsToBytes(384) -#define SHA512_DIGEST_LEN bitsToBytes(512) -#define MODE_SHA_512_224 (0 << 2) -#define MODE_SHA_512_256 (1 << 2) -#define MODE_SHA_384 (2 << 2) -#define MODE_SHA_512 (3 << 2) - -/* Current name and version values */ -#define SHA1_NAME0 "sha1" -#define SHA1_NAME1 " " -#define SHA1_VERSION "0.50" - -#define SHA256_NAME0 "sha2" -#define SHA256_NAME1 "-256" -#define SHA256_VERSION "0.80" - -#define SHA512_NAME0 "sha2" -#define SHA512_NAME1 "-512" -#define SHA512_VERSION "0.80" - - -/* - * TRNG segment. - */ - -/* addresses and codes for the TRNG cores */ -#define TRNG_ADDR_BASE (SEGMENT_OFFSET_RNGS + (0x00 * CORE_SIZE)) -#define TRNG_ADDR_NAME0 (TRNG_ADDR_BASE + ADDR_NAME0) -#define TRNG_ADDR_NAME1 (TRNG_ADDR_BASE + ADDR_NAME1) -#define TRNG_ADDR_VERSION (TRNG_ADDR_BASE + ADDR_VERSION) -#define TRNG_ADDR_CTRL (TRNG_ADDR_BASE + 0x10) -#define TRNG_CTRL_DISCARD (1) -#define TRNG_CTRL_TEST_MODE (2) -#define TRNG_ADDR_STATUS (TRNG_ADDR_BASE + 0x11) -/* No status bits defined (yet) */ -#define TRNG_ADDR_DELAY (TRNG_ADDR_BASE + 0x13) - -#define ENTROPY1_ADDR_BASE (SEGMENT_OFFSET_RNGS + (0x05 * CORE_SIZE)) -#define ENTROPY1_ADDR_NAME0 (ENTROPY1_ADDR_BASE + ADDR_NAME0) -#define ENTROPY1_ADDR_NAME1 (ENTROPY1_ADDR_BASE + ADDR_NAME1) -#define ENTROPY1_ADDR_VERSION (ENTROPY1_ADDR_BASE + ADDR_VERSION) -#define ENTROPY1_ADDR_CTRL (ENTROPY1_ADDR_BASE + 0x10) -#define ENTROPY1_CTRL_ENABLE (1) -#define ENTROPY1_ADDR_STATUS (ENTROPY1_ADDR_BASE + 0x11) -#define ENTROPY1_STATUS_VALID (1) -#define ENTROPY1_ADDR_ENTROPY (ENTROPY1_ADDR_BASE + 0x20) -#define ENTROPY1_ADDR_DELTA (ENTROPY1_ADDR_BASE + 0x30) - -#define ENTROPY2_ADDR_BASE (SEGMENT_OFFSET_RNGS + (0x06 * CORE_SIZE)) -#define ENTROPY2_ADDR_NAME0 (ENTROPY2_ADDR_BASE + ADDR_NAME0) -#define ENTROPY2_ADDR_NAME1 (ENTROPY2_ADDR_BASE + ADDR_NAME1) -#define ENTROPY2_ADDR_VERSION (ENTROPY2_ADDR_BASE + ADDR_VERSION) -#define ENTROPY2_ADDR_CTRL (ENTROPY2_ADDR_BASE + 0x10) -#define ENTROPY2_CTRL_ENABLE (1) -#define ENTROPY2_ADDR_STATUS (ENTROPY2_ADDR_BASE + 0x11) -#define ENTROPY2_STATUS_VALID (1) -#define ENTROPY2_ADDR_OPA (ENTROPY2_ADDR_BASE + 0x18) -#define ENTROPY2_ADDR_OPB (ENTROPY2_ADDR_BASE + 0x19) -#define ENTROPY2_ADDR_ENTROPY (ENTROPY2_ADDR_BASE + 0x20) -#define ENTROPY2_ADDR_RAW (ENTROPY2_ADDR_BASE + 0x21) -#define ENTROPY2_ADDR_ROSC (ENTROPY2_ADDR_BASE + 0x22) - -#define MIXER_ADDR_BASE (SEGMENT_OFFSET_RNGS + (0x0a * CORE_SIZE)) -#define MIXER_ADDR_NAME0 (MIXER_ADDR_BASE + ADDR_NAME0) -#define MIXER_ADDR_NAME1 (MIXER_ADDR_BASE + ADDR_NAME1) -#define MIXER_ADDR_VERSION (MIXER_ADDR_BASE + ADDR_VERSION) -#define MIXER_ADDR_CTRL (MIXER_ADDR_BASE + 0x10) -#define MIXER_CTRL_ENABLE (1) -#define MIXER_CTRL_RESTART (2) -#define MIXER_ADDR_STATUS (MIXER_ADDR_BASE + 0x11) -/* No status bits defined (yet) */ -#define MIXER_ADDR_TIMEOUT (MIXER_ADDR_BASE + 0x20) - -#define CSPRNG_ADDR_BASE (SEGMENT_OFFSET_RNGS + (0x0b * CORE_SIZE)) -#define CSPRNG_ADDR_NAME0 (CSPRNG_ADDR_BASE + ADDR_NAME0) -#define CSPRNG_ADDR_NAME1 (CSPRNG_ADDR_BASE + ADDR_NAME1) -#define CSPRNG_ADDR_VERSION (CSPRNG_ADDR_BASE + ADDR_VERSION) -#define CSPRNG_ADDR_CTRL (CSPRNG_ADDR_BASE + 0x10) -#define CSPRNG_CTRL_ENABLE (1) -#define CSPRNG_CTRL_SEED (2) -#define CSPRNG_ADDR_STATUS (CSPRNG_ADDR_BASE + 0x11) -#define CSPRNG_STATUS_VALID (1) -#define CSPRNG_ADDR_RANDOM (CSPRNG_ADDR_BASE + 0x20) -#define CSPRNG_ADDR_NROUNDS (CSPRNG_ADDR_BASE + 0x40) -#define CSPRNG_ADDR_NBLOCKS_LO (CSPRNG_ADDR_BASE + 0x41) -#define CSPRNG_ADDR_NBLOCKS_HI (CSPRNG_ADDR_BASE + 0x42) - -/* Current name and version values */ -#define TRNG_NAME0 "trng" -#define TRNG_NAME1 " " -#define TRNG_VERSION "0.50" - -#define AVALANCHE_ENTROPY_NAME0 "extn" -#define AVALANCHE_ENTROPY_NAME1 "oise" -#define AVALANCHE_ENTROPY_VERSION "0.10" - -#define ROSC_ENTROPY_NAME0 "rosc" -#define ROSC_ENTROPY_NAME1 " ent" -#define ROSC_ENTROPY_VERSION "0.10" - -#define CSPRNG_NAME0 "cspr" -#define CSPRNG_NAME1 "ng " -#define CSPRNG_VERSION "0.50" - - -/* - * CIPHERS segment. - */ - -/* AES core */ -#define AES_ADDR_BASE (SEGMENT_OFFSET_CIPHERS + (0 * CORE_SIZE)) -#define AES_ADDR_NAME0 (AES_ADDR_BASE + ADDR_NAME0) -#define AES_ADDR_NAME1 (AES_ADDR_BASE + ADDR_NAME1) -#define AES_ADDR_VERSION (AES_ADDR_BASE + ADDR_VERSION) -#define AES_ADDR_CTRL (AES_ADDR_BASE + ADDR_CTRL) -#define AES_ADDR_STATUS (AES_ADDR_BASE + ADDR_STATUS) - -#define AES_ADDR_CONFIG (AES_ADDR_BASE + 0x0a) -#define AES_CONFIG_ENCDEC (1) -#define AES_CONFIG_KEYLEN (2) - -#define AES_ADDR_KEY0 (AES_ADDR_BASE + 0x10) -#define AES_ADDR_KEY1 (AES_ADDR_BASE + 0x11) -#define AES_ADDR_KEY2 (AES_ADDR_BASE + 0x12) -#define AES_ADDR_KEY3 (AES_ADDR_BASE + 0x13) -#define AES_ADDR_KEY4 (AES_ADDR_BASE + 0x14) -#define AES_ADDR_KEY5 (AES_ADDR_BASE + 0x15) -#define AES_ADDR_KEY6 (AES_ADDR_BASE + 0x16) -#define AES_ADDR_KEY7 (AES_ADDR_BASE + 0x17) - -#define AES_ADDR_BLOCK0 (AES_ADDR_BASE + 0x20) -#define AES_ADDR_BLOCK1 (AES_ADDR_BASE + 0x21) -#define AES_ADDR_BLOCK2 (AES_ADDR_BASE + 0x22) -#define AES_ADDR_BLOCK3 (AES_ADDR_BASE + 0x23) - -#define AES_ADDR_RESULT0 (AES_ADDR_BASE + 0x30) -#define AES_ADDR_RESULT1 (AES_ADDR_BASE + 0x31) -#define AES_ADDR_RESULT2 (AES_ADDR_BASE + 0x32) -#define AES_ADDR_RESULT3 (AES_ADDR_BASE + 0x33) - -/* Current name and version values */ -#define AES_CORE_NAME0 "aes " -#define AES_CORE_NAME1 " " -#define AES_CORE_VERSION "0.80" - - -/* Chacha core */ -#define CHACHA_ADDR_BASE (SEGMENT_OFFSET_CIPHERS + (1 * CORE_SIZE)) -#define CHACHA_ADDR_NAME0 (CHACHA_ADDR_BASE + ADDR_NAME0) -#define CHACHA_ADDR_NAME1 (CHACHA_ADDR_BASE + ADDR_NAME1) -#define CHACHA_ADDR_VERSION (CHACHA_ADDR_BASE + ADDR_VERSION) -#define CHACHA_ADDR_CTRL (CHACHA_ADDR_BASE + ADDR_CTRL) -#define CHACHA_ADDR_STATUS (CHACHA_ADDR_BASE + ADDR_STATUS) - -#define CHACHA_ADDR_KEYLEN (CHACHA_ADDR_BASE + 0x0a) -#define CHACHA_KEYLEN (1) - -#define CHACHA_ADDR_ROUNDS (CHACHA_ADDR_BASE + 0x0b) - -#define CHACHA_ADDR_KEY0 (CHACHA_ADDR_BASE + 0x10) -#define CHACHA_ADDR_KEY1 (CHACHA_ADDR_BASE + 0x11) -#define CHACHA_ADDR_KEY2 (CHACHA_ADDR_BASE + 0x12) -#define CHACHA_ADDR_KEY3 (CHACHA_ADDR_BASE + 0x13) -#define CHACHA_ADDR_KEY4 (CHACHA_ADDR_BASE + 0x14) -#define CHACHA_ADDR_KEY5 (CHACHA_ADDR_BASE + 0x15) -#define CHACHA_ADDR_KEY6 (CHACHA_ADDR_BASE + 0x16) -#define CHACHA_ADDR_KEY7 (CHACHA_ADDR_BASE + 0x17) - -#define CHACHA_ADDR_IV0 (CHACHA_ADDR_BASE + 0x20) -#define CHACHA_ADDR_IV1 (CHACHA_ADDR_BASE + 0x21) - -#define CHACHA_ADDR_DATA_IN0 (CHACHA_ADDR_BASE + 0x40) -#define CHACHA_ADDR_DATA_IN1 (CHACHA_ADDR_BASE + 0x41) -#define CHACHA_ADDR_DATA_IN2 (CHACHA_ADDR_BASE + 0x42) -#define CHACHA_ADDR_DATA_IN3 (CHACHA_ADDR_BASE + 0x43) -#define CHACHA_ADDR_DATA_IN4 (CHACHA_ADDR_BASE + 0x44) -#define CHACHA_ADDR_DATA_IN5 (CHACHA_ADDR_BASE + 0x45) -#define CHACHA_ADDR_DATA_IN6 (CHACHA_ADDR_BASE + 0x46) -#define CHACHA_ADDR_DATA_IN7 (CHACHA_ADDR_BASE + 0x47) -#define CHACHA_ADDR_DATA_IN8 (CHACHA_ADDR_BASE + 0x48) -#define CHACHA_ADDR_DATA_IN9 (CHACHA_ADDR_BASE + 0x49) -#define CHACHA_ADDR_DATA_IN10 (CHACHA_ADDR_BASE + 0x4a) -#define CHACHA_ADDR_DATA_IN11 (CHACHA_ADDR_BASE + 0x4b) -#define CHACHA_ADDR_DATA_IN12 (CHACHA_ADDR_BASE + 0x4c) -#define CHACHA_ADDR_DATA_IN13 (CHACHA_ADDR_BASE + 0x4d) -#define CHACHA_ADDR_DATA_IN14 (CHACHA_ADDR_BASE + 0x4e) -#define CHACHA_ADDR_DATA_IN15 (CHACHA_ADDR_BASE + 0x4f) - -#define CHACHA_ADDR_DATA_OUT0 (CHACHA_ADDR_BASE + 0x80) -#define CHACHA_ADDR_DATA_OUT1 (CHACHA_ADDR_BASE + 0x81) -#define CHACHA_ADDR_DATA_OUT2 (CHACHA_ADDR_BASE + 0x82) -#define CHACHA_ADDR_DATA_OUT3 (CHACHA_ADDR_BASE + 0x83) -#define CHACHA_ADDR_DATA_OUT4 (CHACHA_ADDR_BASE + 0x84) -#define CHACHA_ADDR_DATA_OUT5 (CHACHA_ADDR_BASE + 0x85) -#define CHACHA_ADDR_DATA_OUT6 (CHACHA_ADDR_BASE + 0x86) -#define CHACHA_ADDR_DATA_OUT7 (CHACHA_ADDR_BASE + 0x87) -#define CHACHA_ADDR_DATA_OUT8 (CHACHA_ADDR_BASE + 0x88) -#define CHACHA_ADDR_DATA_OUT9 (CHACHA_ADDR_BASE + 0x89) -#define CHACHA_ADDR_DATA_OUT10 (CHACHA_ADDR_BASE + 0x8a) -#define CHACHA_ADDR_DATA_OUT11 (CHACHA_ADDR_BASE + 0x8b) -#define CHACHA_ADDR_DATA_OUT12 (CHACHA_ADDR_BASE + 0x8c) -#define CHACHA_ADDR_DATA_OUT13 (CHACHA_ADDR_BASE + 0x8d) -#define CHACHA_ADDR_DATA_OUT14 (CHACHA_ADDR_BASE + 0x8e) -#define CHACHA_ADDR_DATA_OUT15 (CHACHA_ADDR_BASE + 0x8f) - -/* Current name and version values */ -#define CHACHA_NAME0 "chac" -#define CHACHA_NAME1 "ha " -#define CHACHA_VERSION "0.80" - - -/* - * MATH segment. - */ - -/* Modexp core */ -#define MODEXP_ADDR_BASE (SEGMENT_OFFSET_MATH + (0x00 * CORE_SIZE)) -#define MODEXP_ADDR_NAME0 (MODEXP_ADDR_BASE + ADDR_NAME0) -#define MODEXP_ADDR_NAME1 (MODEXP_ADDR_BASE + ADDR_NAME1) -#define MODEXP_ADDR_VERSION (MODEXP_ADDR_BASE + ADDR_VERSION) -#define MODEXP_ADDR_CTRL (MODEXP_ADDR_BASE + ADDR_CTRL) -#define MODEXP_CTRL_INIT_BIT (1) -#define MODEXP_CTRL_NEXT_BIT (2) -#define MODEXP_ADDR_STATUS (MODEXP_ADDR_BASE + ADDR_STATUS) - -#define MODEXP_ADDR_DELAY (MODEXP_ADDR_BASE + 0x13) -#define MODEXP_STATUS_READY (1) - -#define MODEXP_MODULUS_LENGTH (MODEXP_ADDR_BASE + 0x20) -#define MODEXP_EXPONENT_LENGTH (MODEXP_ADDR_BASE + 0x21) -#define MODEXP_LENGTH (MODEXP_ADDR_BASE + 0x22) - -#define MODEXP_MODULUS_PTR_RST (MODEXP_ADDR_BASE + 0x30) -#define MODEXP_MODULUS_DATA (MODEXP_ADDR_BASE + 0x31) - -#define MODEXP_EXPONENT_PTR_RST (MODEXP_ADDR_BASE + 0x40) -#define MODEXP_EXPONENT_DATA (MODEXP_ADDR_BASE + 0x41) - -#define MODEXP_MESSAGE_PTR_RST (MODEXP_ADDR_BASE + 0x50) -#define MODEXP_MESSAGE_DATA (MODEXP_ADDR_BASE + 0x51) - -#define MODEXP_RESULT_PTR_RST (MODEXP_ADDR_BASE + 0x60) -#define MODEXP_RESULT_DATA (MODEXP_ADDR_BASE + 0x61) - -#define MODEXP_NAME0 "mode" -#define MODEXP_NAME1 "xp " -#define MODEXP_VERSION "0.51" - - -/* - * C API error codes. Defined in this form so we can keep the tokens - * and error strings together. See errorstrings.c. - */ - -#define HAL_ERROR_LIST \ - DEFINE_HAL_ERROR(HAL_OK, "No error") \ - DEFINE_HAL_ERROR(HAL_ERROR_BAD_ARGUMENTS, "Bad arguments given") \ - DEFINE_HAL_ERROR(HAL_ERROR_UNSUPPORTED_KEY, "Unsupported key type or key length") \ - DEFINE_HAL_ERROR(HAL_ERROR_IO_SETUP_FAILED, "Could not set up I/O with FPGA") \ - DEFINE_HAL_ERROR(HAL_ERROR_IO_TIMEOUT, "I/O with FPGA timed out") \ - DEFINE_HAL_ERROR(HAL_ERROR_IO_UNEXPECTED, "Unexpected response from FPGA") \ - DEFINE_HAL_ERROR(HAL_ERROR_IO_OS_ERROR, "Operating system error talking to FPGA") \ - DEFINE_HAL_ERROR(HAL_ERROR_IO_BAD_COUNT, "Bad byte count") \ - DEFINE_HAL_ERROR(HAL_ERROR_CSPRNG_BROKEN, "CSPRNG is returning nonsense") \ - DEFINE_HAL_ERROR(HAL_ERROR_KEYWRAP_BAD_MAGIC, "Bad magic number while unwrapping key") \ - DEFINE_HAL_ERROR(HAL_ERROR_KEYWRAP_BAD_LENGTH, "Length out of range while unwrapping key") \ - DEFINE_HAL_ERROR(HAL_ERROR_KEYWRAP_BAD_PADDING, "Non-zero padding detected unwrapping key") \ - DEFINE_HAL_ERROR(HAL_ERROR_IMPOSSIBLE, "\"Impossible\" error") \ - DEFINE_HAL_ERROR(HAL_ERROR_ALLOCATION_FAILURE, "Memory allocation failed") \ - DEFINE_HAL_ERROR(HAL_ERROR_RESULT_TOO_LONG, "Result too long for buffer") \ - DEFINE_HAL_ERROR(HAL_ERROR_ASN1_PARSE_FAILED, "ASN.1 parse failed") \ - END_OF_HAL_ERROR_LIST - -/* Marker to forestall silly line continuation errors */ -#define END_OF_HAL_ERROR_LIST - -/* Define the error code enum here. See errorstrings.c for the text strings. */ -#define DEFINE_HAL_ERROR(_code_,_text_) _code_, -typedef enum { HAL_ERROR_LIST N_HAL_ERRORS } hal_error_t; -#undef DEFINE_HAL_ERROR - -/* - * Public functions. - */ - -#include -#include - -extern const char *hal_error_string(const hal_error_t err); - -/* - * Public I/O functions. - */ - -extern void hal_io_set_debug(int onoff); -extern hal_error_t hal_io_write(off_t offset, const uint8_t *buf, size_t len); -extern hal_error_t hal_io_read(off_t offset, uint8_t *buf, size_t len); -extern hal_error_t hal_io_expected(off_t offset, const uint8_t *expected, size_t len); -extern hal_error_t hal_io_init(off_t offset); -extern hal_error_t hal_io_next(off_t offset); -extern hal_error_t hal_io_wait(off_t offset, uint8_t status, int *count); -extern hal_error_t hal_io_wait_ready(off_t offset); -extern hal_error_t hal_io_wait_valid(off_t offset); - -/* - * Higher level public API. - */ - -/* - * Get random bytes from the CSPRNG. - */ - -extern hal_error_t hal_get_random(void *buffer, const size_t length); - -/* - * Hash and HMAC API. - */ - -/* - * Longest hash block and digest we support at the moment. - */ - -#define HAL_MAX_HASH_BLOCK_LENGTH SHA512_BLOCK_LEN -#define HAL_MAX_HASH_DIGEST_LENGTH SHA512_DIGEST_LEN - -/* - * Public information about a digest algorithm. - * - * The _state_length values in the descriptor and the typed opaque - * pointers in the API are all intended to hide internal details of - * the implementation while making memory allocation the caller's - * problem. - */ - -typedef struct { - size_t block_length; - size_t digest_length; - size_t hash_state_length; - size_t hmac_state_length; - const uint8_t * const digest_algorithm_id; - size_t digest_algorithm_id_length; - const void *driver; -} hal_hash_descriptor_t; - -/* - * Typed opaque pointers to internal state. - */ - -typedef struct { void *state; } hal_hash_state_t; -typedef struct { void *state; } hal_hmac_state_t; - -/* - * Supported digest algorithms. These are one-element arrays so that - * they can be used as constant pointers. - */ - -extern const hal_hash_descriptor_t hal_hash_sha1[1]; -extern const hal_hash_descriptor_t hal_hash_sha256[1]; -extern const hal_hash_descriptor_t hal_hash_sha512_224[1]; -extern const hal_hash_descriptor_t hal_hash_sha512_256[1]; -extern const hal_hash_descriptor_t hal_hash_sha384[1]; -extern const hal_hash_descriptor_t hal_hash_sha512[1]; - -/* - * Hash and HMAC functions. - */ - -extern void hal_hash_set_debug(int onoff); - -extern hal_error_t hal_hash_core_present(const hal_hash_descriptor_t * const descriptor); - -extern hal_error_t hal_hash_initialize(const hal_hash_descriptor_t * const descriptor, - hal_hash_state_t *state, - void *state_buffer, const size_t state_length); - -extern hal_error_t hal_hash_update(const hal_hash_state_t state, - const uint8_t * data, const size_t length); - -extern hal_error_t hal_hash_finalize(const hal_hash_state_t state, - uint8_t *digest, const size_t length); - -extern hal_error_t hal_hmac_initialize(const hal_hash_descriptor_t * const descriptor, - hal_hmac_state_t *state, - void *state_buffer, const size_t state_length, - const uint8_t * const key, const size_t key_length); - -extern hal_error_t hal_hmac_update(const hal_hmac_state_t state, - const uint8_t * data, const size_t length); - -extern hal_error_t hal_hmac_finalize(const hal_hmac_state_t state, - uint8_t *hmac, const size_t length); - -/* - * AES key wrap functions. - */ - -extern hal_error_t hal_aes_keywrap(const uint8_t *kek, const size_t kek_length, - const uint8_t *plaintext, const size_t plaintext_length, - uint8_t *cyphertext, size_t *ciphertext_length); - -extern hal_error_t hal_aes_keyunwrap(const uint8_t *kek, const size_t kek_length, - const uint8_t *ciphertext, const size_t ciphertext_length, - unsigned char *plaintext, size_t *plaintext_length); - -extern size_t hal_aes_keywrap_ciphertext_length(const size_t plaintext_length); - -/* - * PBKDF2 function. Uses HMAC with the specified digest algorithm as - * the pseudo-random function (PRF). - */ - -extern hal_error_t hal_pbkdf2(const hal_hash_descriptor_t * const descriptor, - const uint8_t * const password, const size_t password_length, - const uint8_t * const salt, const size_t salt_length, - uint8_t * derived_key, const size_t derived_key_length, - unsigned iterations_desired); - -/* - * Modular exponentiation. - */ - -extern void hal_modexp_set_debug(const int onoff); - -extern hal_error_t hal_modexp(const uint8_t * const msg, const size_t msg_len, /* Message */ - const uint8_t * const exp, const size_t exp_len, /* Exponent */ - const uint8_t * const mod, const size_t mod_len, /* Modulus */ - uint8_t * result, const size_t result_len); - - -/* - * RSA. - */ - -typedef enum { HAL_RSA_PRIVATE, HAL_RSA_PUBLIC } hal_rsa_key_type_t; - -typedef struct { void *key; } hal_rsa_key_t; - -extern const size_t hal_rsa_key_t_size; - -extern void hal_rsa_set_debug(const int onoff); - -extern void hal_rsa_set_blinding(const int onoff); - -extern hal_error_t hal_rsa_key_load(const hal_rsa_key_type_t type, - hal_rsa_key_t *key, - void *keybuf, const size_t keybuf_len, - const uint8_t * const n, const size_t n_len, - const uint8_t * const e, const size_t e_len, - const uint8_t * const d, const size_t d_len, - const uint8_t * const p, const size_t p_len, - const uint8_t * const q, const size_t q_len, - const uint8_t * const u, const size_t u_len, - const uint8_t * const dP, const size_t dP_len, - const uint8_t * const dQ, const size_t dQ_len); - -extern hal_error_t hal_rsa_key_get_modulus(hal_rsa_key_t key, - uint8_t *modulus, - size_t *modulus_len, - const size_t modulus_max); - -extern hal_error_t hal_rsa_key_get_public_exponent(hal_rsa_key_t key, - uint8_t *public_exponent, - size_t *public_exponent_len, - const size_t public_exponent_max); - -extern void hal_rsa_key_clear(hal_rsa_key_t key); - -extern hal_error_t hal_rsa_encrypt(hal_rsa_key_t key, - const uint8_t * const input, const size_t input_len, - uint8_t * output, const size_t output_len); - -extern hal_error_t hal_rsa_decrypt(hal_rsa_key_t key, - const uint8_t * const input, const size_t input_len, - uint8_t * output, const size_t output_len); - -extern hal_error_t hal_rsa_key_gen(hal_rsa_key_t *key, - void *keybuf, const size_t keybuf_len, - const unsigned key_length, - const uint8_t * const public_exponent, const size_t public_exponent_len); - -extern hal_error_t hal_rsa_key_to_der(hal_rsa_key_t key, - uint8_t *der, size_t *der_len, const size_t der_max); - -extern size_t hal_rsa_key_to_der_len(hal_rsa_key_t key); - -extern hal_error_t hal_rsa_key_from_der(hal_rsa_key_t *key, - void *keybuf, const size_t keybuf_len, - const uint8_t * const der, const size_t der_len); - -#endif /* _CRYPTECH_H_ */ - -/* - * Local variables: - * indent-tabs-mode: nil - * End: - */ -- cgit v1.2.3