| Age | Commit message (Collapse) | Author |
|---|
|
key export/import (kekek = none, kek_len = 0), rather than separate RPCs.
|
|
Exported keys are wrapped with the MKM KEK, not a transit KEK, and can
only be imported back to the same HSM.
The idea is to support operators who have more keys than will fit on the
HSM, so they will cycle keys into and out of the HSM as needed.
NOTE that hashsig is, as always, special. The hashsig key has an internal
index that is updated on every signature. To prevent a hashsig key from
being re-imported with an old index (which would compromise the security
of the key), the hashsig key is disabled on export, and must be deleted
from the HSM before being re-imported.
|
|
- Add support for null pointer arguments in RPCs for get_digest_algorithm_id
and get_public_key. This is years overdue, and would have obviated the need
for get_public_key_len as a separate RPC.
- Refactor pkey_local_get_public_key_len in terms of pkey_local_get_public_key.
- Add more parameter sanity checks to rpc_api.c.
- Add a len_max parameter to hal_xdr_decode_variable_opaque, rather than
having len be an in/out parameter. This brings xdr slightly more in line
with the rest of the code base (again after literal years), and slightly
simplifies several calls in rpc_client.c.
|
|
- Move hashsig.h contents into hal.h.
- Uppercase lmots and lms algorithm types, because we have a convention
that enum values are uppercase.
- Change all I to hal_uuid_t, because that how we're using them, and it
seems silly to have two different 16-byte array types.
- Change all "memcpy(&this, &that, sizeof(this))" to "this = that",
because it's more succinct, more type-safe, and harder to get wrong.
- Slightly tighten up lmots_generate, lmots_sign, and
lmots_public_key_candidate.
- Remove verbatim draft text, now that I'm pretty sure I implemented it
correctly.
|
|
This fixes CT-01-005: OOB writes through dynamic stack allocations (Critical)
|
|
|
|
|
|
|
|
Need to refactor init sequence slightly (again), this time to humor
the bootloader, which has its own special read-only view of the PIN
block in the token keystore.
|
|
|
|
|
|
success, but reduces the failure rate on a busy server.
|
|
pkey_open() now looks in both keystores rather than requiring the user
to know. The chance of collision with randomly-generated UUID is low
enough that we really ought to be able to present a single namespace.
So now we do.
pkey_match() now takes a couple of extra arguments which allow a
single search to cover both keystores, as well as matching for
specific key flags. The former interface was pretty much useless for
anything involving flags, and required the user to issue a separate
call for each keystore.
User wheel is now exempt from the per-session key lookup constraints,
Whether this is a good idea or not is an interesting question, but the
whole PKCS #11 derived per-session key thing is weird to begin with,
and having keystore listings on the console deliberately ignore
session keys was just too confusing.
|
|
Now that we use PKCS #8 format for private keys, all key formats we
use include ASN.1 AlgorithmIdentifier field describing the key, so
specifying key type and curve as arguments to hal_rpc_pkey_load() is
neither necessary nor particularly useful.
|
|
Among other things, it turns out that this works better if one
remembers to write the RPC server dispatch code as well as the client
code, doh.
|
|
PKCS #11 supports zero-length attributes (eg, CKA_LABEL) so hack of
using zero length attribute as NIL value won't work, instead we use a
slightly more portable version of the hack PKCS #11 uses (PKCS #11
stuffs -1 into a CK_ULONG, we stuff 0xFFFFFFFF into a uint32_t).
ks_attribute.c code was trying too hard and tripping over its own
socks. Instead of trying to maintain attributes[] in place during
modification, we now perform the minimum necessary change then re-scan
the block. This is (very slightly) slower but more robust, both
because the scan code has better error checking and because it's the
scan code that we want to be sure is happy before committing a change.
Rename hal_rpc_pkey_attribute_t to hal_pkey_attribute_t.
|
|
|
|
Calling hal_rpc_pkey_get_attributes() with attribute_buffer_len = 0
now changes the return behavior so that it reports the lengths of
attributes listed in the query, with a length of zero for attributes
not present at all. This is mostly to support C_GetAttributeValue()
in PKCS #11, but we also use it to make the Python interface a bit
kinder to the user.
|
|
Wiping the keystore flash requires reinitializing the keystore, but we
don't want to allocate new static memory when we do this.
|
|
hal_rpc_pkey_list() was a simplistic solution that worked when the
keystore only supported a handful of keys and we needed a quick
temporary solution in time for a workshop. It doesn't handle large
numbers of keys well, and while we could fix that, all of its
functionality is now available via more robust API functions, so
simplifying the API by deleting it seems best.
Since this change required mucking with dispatch vectors yet again, it
converts them to use C99 "designated initializer" syntax.
|
|
|
|
pkey attribute API is now just set_attributes() and get_attributes().
|
|
This is not yet complete, only the ks_volatile driver supports it,
ks_flash will be a bit more complicated and isn't written yet.
At the moment, this adds a complete duplicate set of
{set,get,delete}_attributes() functions in parallel to the earlier
{set,get,delete}_attribute() functions. We will almost certainly want
to get rid of the duplicates, probably (but not necessarily) the
entire single-attribute suite. At the moment, though, we want both
sets so we can compare execution speeds of the two sets of functions.
|
|
Incidental minor refactoring of hal_rpc_server_dispatch().
|
|
The rpc_server code used to bypass the public API calls by using the
RPC dispatch vectors directly, but doing so bypasses various checks
for trivial argument errors. It's not safe for the HSM to trust the
client to check these, and duplicating the checks in the client and
server code is error prone, so the best solution is for the server
code to dispatch via the public API, as it was originally designed to
do, and not try to micro-optimize the dispatch calls.
|
|
In retrospect it's obvious that this never needed to be an
input/output argument, as its value will always be the same as the
last value in the returned array. Doh. So simplify the RPC and call
sequence slightly by removing the unnecessary output value.
|
|
The filtering code for this function has not been tested yet.
|
|
Mostly this is another checkpoint (still passes PKCS #11 "make test").
ks_volatile.c now contains support for per-session object visibility;
this may need more work to support things like a CLI view of all
objects regardless of session. Adding this required minor changes to
the keystore and pkey APIs, mostly because sessions are per-client.
ks_volatile.c also contains an untested first cut at attribute
support. Attribute support in ks_flash.c still under construction.
|
|
RPC calls which pass a pkey handle don't need to pass a session
handle, because the session handle is already in the HSM's pkey slot
object; pkey RPC calls which don't pass a pkey argument do need to
pass a session handle.
This change percolates down to the keystore driver, because only the
keystore driver knows whether that particular keystore cares about
session handles.
|
|
This is mostly to archive a commit where PKCS #11 "make test" still
works after converting the ks_volatile code to use SDRAM allocated at
startup instead of (large) static variables.
The attribute code itself is incomplete at this point.
|
|
|
|
Now that key names are UUIDs generated by the HSM, there's no real
need to specify type key type when looking up a key, and removing the
`type` argument allows a few simplifications of both the internal
keystore API and of client code calling the public RPC API.
|
|
Changes to implement a revised keystore API. This code probably won't
even compile properly yet, and almost certainly will not run, but most
of the expected changes are complete at this point. Main points:
* Key names are now UUIDs, and are generated by the HSM, not the client.
* Keystore API no longer assumes that key database is resident in
memory (original API was written on the assumption that the keystore
flash would be mapped into the HSM CPU's address space, but
apparently the board and flash drivers don't really support that).
A few other changes have probably crept in, but the bulk of this
changeset is just following through implications of the above, some of
which percolate all the way back to the public RPC API.
|
|
|
|
|
|
|
|
|
|
client handle in all responses.
This simplies the daemon a little, and means that the directly-connected
serial client uses the same wire format as the daemon. The expense is some
redundant code in rpc_client and rpc_server to process (and throw away)
this extra stuff.
|
|
Includes preliminary support for the magic Mac-specific ioctl() to see
line speed, but has not yet been tested, that's waiting for some
supporting tweaks to the RPC code from Paul.
Includes some general cleanup which isn't really specific to Mac OS X
per se but which needed doing and which simplifies adding the Mac code.
|
|
|
|
Temporary nature of null string as key name is not enforced by the
keystore code, it's just a convention to allow callers to generate a
keypair, obtain the public key, hash that to a Subject Key Identifier
(SKI), and rename the key using the SKI as the new name.
This is a compromise to let us use SKI-based key names in PKCS #11
while keeping the keystore code simple.
|
|
|
|
|
|
|
|
threaded server.
|
|
|
|
|
|
Added RPC function to get server version number.
Substantially reworked GNUMakefile with conditionals.
Renamed rpc_*() and xdr_*() to hal_*() for consistency.
Moved hal_io_fmc.c from stm32 repo.
|
|
and dispatch.
|
