aboutsummaryrefslogtreecommitdiff
path: root/ks_flash.c
AgeCommit message (Collapse)Author
2016-11-01hal_ks_index_fsck() and a pile of debugging code.Rob Austein
The debugging code was for tracking down what turned out to be a race condition in the Alpha's flash driver code (see sw/stm32); much of this was temporary, and will be removed in a (near) future commit, but some of the techniques were useful and belong in the repository in case we need to pull them back for something similar in the future. hal_ks_index_fsck() attempts to diagnose all the things I found wrong in the ks_flash index after one long series of errors. As presently written, it doesn't attempt to fix anything, just diagnose errors: the intent is that we can call this, before and after every modification if necessary, to poinpoint exactly which calls introduce errors. Once things stablize a bit, we may want to crank down the number of calls to this (it's a bit expensive, since it checks the entire index), and perhaps add the ability to clean up whatever errors it might find; the latter might be a good candidate for a CLI command.
2016-10-24Make previous_uuid an input-only argument to hal_rpc_pkey_match().Rob Austein
In retrospect it's obvious that this never needed to be an input/output argument, as its value will always be the same as the last value in the returned array. Doh. So simplify the RPC and call sequence slightly by removing the unnecessary output value.
2016-10-19Shake first round of bugs out of hal_rpc_pkey_match().Rob Austein
The filtering code for this function has not been tested yet.
2016-10-16Debug keystore attribute code; handle name properly in ks_index_replace().Rob Austein
hal_rpc_pkey_match() still untested.
2016-10-14Keystore attribute code. Not really tested.Rob Austein
Passes PKCS #11 "make test" but nothing uses the new attribute code yet. Refactored some of the flash block update code. Attribute code is annoyingly verbose, might be possible to refactor some of that.
2016-10-09Per-session objects in ks_volatile; more untested ks_attribute code.Rob Austein
Mostly this is another checkpoint (still passes PKCS #11 "make test"). ks_volatile.c now contains support for per-session object visibility; this may need more work to support things like a CLI view of all objects regardless of session. Adding this required minor changes to the keystore and pkey APIs, mostly because sessions are per-client. ks_volatile.c also contains an untested first cut at attribute support. Attribute support in ks_flash.c still under construction.
2016-10-07Fix session handle arguments in RPC calls.Rob Austein
RPC calls which pass a pkey handle don't need to pass a session handle, because the session handle is already in the HSM's pkey slot object; pkey RPC calls which don't pass a pkey argument do need to pass a session handle. This change percolates down to the keystore driver, because only the keystore driver knows whether that particular keystore cares about session handles.
2016-10-07Checkpoint along the way to adding keystore attribute support.Rob Austein
This is mostly to archive a commit where PKCS #11 "make test" still works after converting the ks_volatile code to use SDRAM allocated at startup instead of (large) static variables. The attribute code itself is incomplete at this point.
2016-09-30Multi-block object support in keystore.Rob Austein
The main reason for supporting multi-block objects is to allow the PKCS #11 code to attach more attributes than will fit comfortably in a single flash block. This may turn out to be unnecessary once we've fleshed out the attribute storage and retrieval code; if so, we can simplify the code, but this way the keystore won't impose arbitrary (and somewhat inscrutable) size limits on PKCS #11 attributes for large keys. This snapshot passes light testing (PKCS #11 "make test" runs), but the tombstone recovery code in ks_init() is a bit involved, and needs more testing with simulated failures (probably induced under GDB).
2016-09-27Redesign ks_flash block header.Rob Austein
* block_status is now a separate field from block_type, rather than being a composite value. * block_status is checked directly for allowed values in block_read(), and is excluded from the CRC, simplifying the tombstone logic and removing the need for a second CRC field. * Added header fields to allow for objects too large to fit in a single block (8192-bit RSA keys, any key with enough opaque attributes attached). So far this is just the header changes, it's not (yet) full support for multi-block objects.
2016-09-27Write updated PIN block before updating index.Rob Austein
Order of operations is tricky when updating flash blocks, because the process is not atomic and we want to leave the index in a consistent state if something fails.
2016-09-27Add hal_ks_index_replace().Rob Austein
2016-09-26More ks_flash cleanup.Rob Austein
block_read() no longer needs `fast` argument. block_zero() now just zeros first page of block.
2016-09-26Rewrite block_erase_maybe() to run the "maybe" check in constant time.Rob Austein
Running this check in constant time probably isn't necessary, but it plugs a (somewhat far-fetched) timing leak and is easy enough. While we're at this, we also skip the CRC check, which is irrelevant here.
2016-09-23Use subsectors instead of sectors in keystore.Rob Austein
2016-09-16Debug new ks_flash code.Rob Austein
2016-09-16Revised ks_flash. Compiles, not yet tested.Rob Austein
2016-09-13Cleanup prior to rewriting ks_flash.c.Rob Austein
Whack masterkey code to meet libhal coding standards, such as they are. Started layout of new ks_flash data structures but no changes to functions or flash usage yet. MKM initialization from flash placed under compile-time conditional with warning because it's a dangerous kludge that should go away. Started getting rid of obsolete keystore code; ks_mmap.c kept for now, until I get around to merging the useful bits into ks_volatile.
2016-09-12Doh, allow keystore reinitialization after unclean reboot.Rob Austein
2016-09-11Explicit initialization of keystore drivers instead of guessing.Rob Austein
2016-09-09Missed a few instances of type-based key naming in keystore drivers.Rob Austein
2016-09-09Simplify hal_rpc_pkey_find() by removing `type` argument.Rob Austein
Now that key names are UUIDs generated by the HSM, there's no real need to specify type key type when looking up a key, and removing the `type` argument allows a few simplifications of both the internal keystore API and of client code calling the public RPC API.
2016-09-08New keystore index internal API. Compiles, not yet integrated or tested.Rob Austein
2016-09-01Move in-memory keystore from client to server. Whack with club until compiles.Rob Austein
Fixes for various minor issues found while integrating with sw/stm32. Moving the in-memory keystore (PKCS #11 session objects, etc) from the client library to the HSM was on the near term to-do list in any case, doing it now turned out to be the easiest way to solve one of the build problems.
2016-09-01Revised keystore API, part one. Not usable yet.Rob Austein
Changes to implement a revised keystore API. This code probably won't even compile properly yet, and almost certainly will not run, but most of the expected changes are complete at this point. Main points: * Key names are now UUIDs, and are generated by the HSM, not the client. * Keystore API no longer assumes that key database is resident in memory (original API was written on the assumption that the keystore flash would be mapped into the HSM CPU's address space, but apparently the board and flash drivers don't really support that). A few other changes have probably crept in, but the bulk of this changeset is just following through implications of the above, some of which percolate all the way back to the public RPC API.
2016-07-06Return an intelligent error from hal_ks_get_kek.Paul Selkirk
2016-06-24Use hal_error_t as suggested by Rob.Fredrik Thulin
2016-06-23Implement master key for wrapping keys in the keystore.Fredrik Thulin
The KEK (Key Encryption Key) is first fetched from the FPGA that gets it from the volatile Master Key Memory (that in theory has tamper*kek_len = len protection with wiping), and secondly from flash. The flash option is meant for development/evaluation use using an Alpha board where the Master Key Memory is not battery backed. For any serious use of an Alpha, an option is to enter the master key into the volatile MKM on each power-on as a way to unlock the keystore.
2016-06-09some cleanup, and fix delete operationFredrik Thulin
2016-06-09Sort out the redeclaration of HAL_OK with Rob's help.Fredrik Thulin
Thanks Rob!
2016-06-09bugfixes and cleanups, seems to sort-of work nowFredrik Thulin
2016-06-08Implement flash keystore storage. Most of it is still untested.Fredrik Thulin
2016-05-15Tweak keystore API to allow update-in-place, so hal_ks_rename() will work.Rob Austein
2016-03-03Initial implementations of ks_get_kek(). Untested, and none of theseRob Austein
are secure (the one in ks_flash.c is a stub, and the others are for cases where we have no secure hardware in which to store the KEK). These are primarily for testing, since in the long run the entire software implementation of AES-keywrap will be replaced by Verilog which never lets software see the unwrapped key. Or so says current theory. For the moment, we just need something that will let us test the rest of the RPC and keystore mechanisms.
2015-12-23RPC interface to TRNG and (incomplete) PIN code.Rob Austein
2015-12-20RPC server stuff mostly written. Compiles, not yet tested. RPCRob Austein
public key extraction functions on hold pending ASN.1 cleanup.