aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-10Clean out huge swacks of RPC API we don't need anymore.Rob Austein
pkey attribute API is now just set_attributes() and get_attributes().
2016-11-10First cut at ks_flash support for attribute get/set/delete API.Rob Austein
Passes minimal unit-testing and the same minimal tests report that it does deliver the desired performance speed-up. More testing and much cleanup still needed. Attribute API not quite stable yet, we're probably going to want to remove all the singleton attribute operations from the RPC protocol, and it turns out that ks_delete_attributes() has enough code in common with ks_set_attributes() that it makes more sense to handle the former as a special case of the latter.
2016-11-08First cut at multi-attribute get/set/delete API.Rob Austein
This is not yet complete, only the ks_volatile driver supports it, ks_flash will be a bit more complicated and isn't written yet. At the moment, this adds a complete duplicate set of {set,get,delete}_attributes() functions in parallel to the earlier {set,get,delete}_attribute() functions. We will almost certainly want to get rid of the duplicates, probably (but not necessarily) the entire single-attribute suite. At the moment, though, we want both sets so we can compare execution speeds of the two sets of functions.
2016-11-05Add hal_rpc_pkey_match() tests to C client test code.Rob Austein
2016-11-05Debug most recent changes to C client RPC API.Rob Austein
2016-11-05Add attribute read timing tests.Rob Austein
Result of running all these timing tests is about what theory would have predicted: read time does not vary significantly between RAM and flash, but write time sure does.
2016-11-05ks_list() was returning garbage for keys not visible to current session.Rob Austein
2016-11-04.set_attribute() speed tests.Rob Austein
2016-11-04Doh, tests should not assume an empty keystore.Rob Austein
2016-11-04More attribute bloat tests, pinwheel to monitor progress.Rob Austein
Watching the pinwheel makes it clear that the painfully slow execution of test_attribute_bloat_flash_many() isn't a single hidously long delay anywhere, rather it's a long steady stream of slow operations and it's the cumulative time that's hurting us. Most likely this is entirely dominated by flash write time, and suggests that it may be worth the additional API and implementation complexity to handle setting a complete set of attributes in a single operation, so that we only have to pay the flash write toll once. Will probably require further testing before we can make an informed decision.
2016-11-03Add keystore attribute tests; add wrapper for Python crypto.Rob Austein
New test class to thrash the keystore attribute mechanism. Added wrapper classes to encapsulate the more obscure bits of the multiple Python public key APIs we're using in a single uniform API, which lets us simplify some of the tests considerably.
2016-11-03Reorder writing of new chunks in ks_set_attribute().Rob Austein
ks_set_attribute() was written before hal_ks_index_fsck(), and was violating the latter's assumptions for no particularly good reason. Writing out new chunks in the expected order is no more work, and simplifies the consistency checks, so do it that way.
2016-11-03Fix sign error in ks_name_cmp(), confusion in hal_ks_index_fsck().Rob Austein
ks_name_cmp() was reporting inverted order when comparing two names which differ only by chunk number. hal_ks_index_fsck() was both broken and more complex than needed.
2016-11-02Convert pkey_match() test into a proper assertion-based unit test.Rob Austein
2016-11-02Get rid of libhal.Attribute (dict suffices).Rob Austein
2016-11-02Archive verbose version of pkey_match() tests before reducing to assertions.Rob Austein
2016-11-02Debug dict() support, add set() support.Rob Austein
2016-11-02Test pkey_match() attribute handling.Rob Austein
2016-11-02Fix pkey_get_attribute(), handle XDR encoding of base types properly.Rob Austein
pkey_get_attribute() wasn't passing value_max, resulting in an XDR error. XDR encoding of built-in types now uses isinstance() rather than playing nasty games with the string names of base types.
2016-11-01Add hal_rpc_pkey_get_key_curve().Rob Austein
Incidental minor refactoring of hal_rpc_server_dispatch().
2016-11-01More Pythonic API for certain pkey calls.Rob Austein
PKey objects can now be used as context managers, in which case the key handle will be closed when the block exits. HSM.pkey_find() now returns a generator which will iterate through the full set of results, making additional RPC calls as necessary. NIST ECDSA test vector test refactored to remove duplicated code.
2016-11-01Fix hal_rpc_pkey_match() calling convention.Rob Austein
Old calling sequence didn't quite work, caller had no sane way to know how large the buffer needed to be. Revised sequence is similar to what the PKCS #11 C_FindObject() call does: return the next batch of UUIDs, up to the number specified, end of data indicated by getting back something less than a full block of UUIDs.
2016-11-01Clean out debugging code (flash I/O ring log).Rob Austein
2016-11-01hal_ks_index_fsck() and a pile of debugging code.Rob Austein
The debugging code was for tracking down what turned out to be a race condition in the Alpha's flash driver code (see sw/stm32); much of this was temporary, and will be removed in a (near) future commit, but some of the techniques were useful and belong in the repository in case we need to pull them back for something similar in the future. hal_ks_index_fsck() attempts to diagnose all the things I found wrong in the ks_flash index after one long series of errors. As presently written, it doesn't attempt to fix anything, just diagnose errors: the intent is that we can call this, before and after every modification if necessary, to poinpoint exactly which calls introduce errors. Once things stablize a bit, we may want to crank down the number of calls to this (it's a bit expensive, since it checks the entire index), and perhaps add the ability to clean up whatever errors it might find; the latter might be a good candidate for a CLI command.
2016-10-30Interop tests against Python RSA and ECDSA implementations.Rob Austein
2016-10-30Continue fleshing out libhal Python unit tests.Rob Austein
2016-10-30Preliminary libhal.py test code superseded by unit-tests.pyRob Austein
2016-10-30Use public RPC API when dispatching from RPC server.Rob Austein
The rpc_server code used to bypass the public API calls by using the RPC dispatch vectors directly, but doing so bypasses various checks for trivial argument errors. It's not safe for the HSM to trust the client to check these, and duplicating the checks in the client and server code is error prone, so the best solution is for the server code to dispatch via the public API, as it was originally designed to do, and not try to micro-optimize the dispatch calls.
2016-10-29Add a bunch of static key tests, including a mixed-mode workout suite.Rob Austein
2016-10-29Mixed mode needs to support PKCS #1.5 DigestInfo for RSA.Rob Austein
2016-10-26Version 0.1 of a set of HSM unit tests, using the Python RPC API.Rob Austein
This is very incomplete. Portions of it are still verbatim copies of the PKCS #11 unit tests, and have not yet been pruned for relevance, much less converted to the corresponding libhal tests.
2016-10-26Add PyCrypto-based mixed-mode support to Python RPC client.Rob Austein
2016-10-26Fix pure-remote-mode hal_rpc_pkey_{sign,verify}().Rob Austein
Pure-remote-mode (where even the hashing is done in the HSM) did not work, because XDR passes zero length strings rather than NULL string pointers. Mostly, we use fixed mode, so nobody noticed.
2016-10-25Uppercase HAL_DIGEST_ALGORITHM_ symbols for API consistency.Rob Austein
2016-10-24Flesh out key object access control.Rob Austein
This is more complicated than I'd have liked, because the PKCS #11 semantics are (much) more complicated than just "are you logged in?" New code passes basic testing with libhal.py and the PKCS #11 unit tests, but there are still unexplored corner cases to be checked. Private token objects remain simple. Code which does not need PKCS HAL_KEY_FLAG_TOKEN and avoid HAL_KEY_FLAG_PUBLIC.
2016-10-24Make previous_uuid an input-only argument to hal_rpc_pkey_match().Rob Austein
In retrospect it's obvious that this never needed to be an input/output argument, as its value will always be the same as the last value in the returned array. Doh. So simplify the RPC and call sequence slightly by removing the unnecessary output value.
2016-10-21Tweak enum handling to handle more of the C enum definition syntax.Rob Austein
Intent is to make it easier just to paste C enum definitions into Python code and have the right thing happen, to simplify keeping C and Python definitions in sync.
2016-10-21Better enum handling, more readable RPC methods.Rob Austein
Using a context manager allows us to write the individual RPC methods fairly legibly, while still enforcing xdrlib.Unpacker.done() logic. Python doesn't really have enums in the sense that C does, and many people have put entirely too much skull sweat into trying to invent the Most Pythonic reimplementation of the enum concept, but an int subclass with a few extra methods is close enough for our purposes.
2016-10-20Fix HAL_KEY_TYPE_* symbols, add Attribute class.Rob Austein
2016-10-19Add handle objects to make API a bit more Pythonic.Rob Austein
2016-10-19Shake first round of bugs out of hal_rpc_pkey_match().Rob Austein
The filtering code for this function has not been tested yet.
2016-10-19Use correct RPC function code in hash_get_digest_algorithm_id().Rob Austein
2016-10-19First cut at Python interface to native libhal RPC.Rob Austein
2016-10-16Debug keystore attribute code; handle name properly in ks_index_replace().Rob Austein
hal_rpc_pkey_match() still untested.
2016-10-15Fencepost error in ks_heapsort().Rob Austein
2016-10-14Keystore attribute code. Not really tested.Rob Austein
Passes PKCS #11 "make test" but nothing uses the new attribute code yet. Refactored some of the flash block update code. Attribute code is annoyingly verbose, might be possible to refactor some of that.
2016-10-09Per-session objects in ks_volatile; more untested ks_attribute code.Rob Austein
Mostly this is another checkpoint (still passes PKCS #11 "make test"). ks_volatile.c now contains support for per-session object visibility; this may need more work to support things like a CLI view of all objects regardless of session. Adding this required minor changes to the keystore and pkey APIs, mostly because sessions are per-client. ks_volatile.c also contains an untested first cut at attribute support. Attribute support in ks_flash.c still under construction.
2016-10-07Fix session handle arguments in RPC calls.Rob Austein
RPC calls which pass a pkey handle don't need to pass a session handle, because the session handle is already in the HSM's pkey slot object; pkey RPC calls which don't pass a pkey argument do need to pass a session handle. This change percolates down to the keystore driver, because only the keystore driver knows whether that particular keystore cares about session handles.
2016-10-07Stop whining about POSIX strnlen() function.Rob Austein
2016-10-07Checkpoint along the way to adding keystore attribute support.Rob Austein
This is mostly to archive a commit where PKCS #11 "make test" still works after converting the ks_volatile code to use SDRAM allocated at startup instead of (large) static variables. The attribute code itself is incomplete at this point.