/*
* test-rsa.c
* ----------
* First stumblings towards a test harness for RSA using Cryptech
* ModExp core.
*
* For the moment this just does modular exponentiation tests using
* RSA keys and pre-formatted data-to-be-signed, without attempting
* CRT or any of the other clever stuff we should be doing. This is
* not usable for any sane purpose other than testing.
*
* Authors: Rob Austein
* Copyright (c) 2015, NORDUnet A/S
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* - Neither the name of the NORDUnet nor the names of its contributors may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include <stdint.h>
#include <string.h>
#include <errno.h>
#include <sys/time.h>
#include <hal.h>
#include "test-rsa.h"
/*
* Run one modexp test.
*/
static int test_modexp(const hal_core_t *core,
const char * const kind,
const rsa_tc_t * const tc,
const rsa_tc_bn_t * const msg, /* Input message */
const rsa_tc_bn_t * const exp, /* Exponent */
const rsa_tc_bn_t * const val) /* Expected result */
{
uint8_t result[tc->n.len];
printf("%s test for %lu-bit RSA key\n", kind, (unsigned long) tc->size);
if (hal_modexp(core, msg->val, msg->len, exp->val, exp->len,
tc->n.val, tc->n.len, result, sizeof(result)) != HAL_OK) {
printf("ModExp failed\n");
return 0;
}
if (memcmp(result, val->val, val->len)) {
printf("MISMATCH\n");
return 0;
}
return 1;
}
/*
* Run one RSA CRT test.
*/
static int test_decrypt(const hal_core_t *core,
const char * const kind,
const rsa_tc_t * const tc)
{
printf("%s test for %lu-bit RSA key\n", kind, (unsigned long) tc->size);
uint8_t keybuf[hal_rsa_key_t_size];
hal_rsa_key_t *key = NULL;
hal_error_t err = HAL_OK;
if ((err = hal_rsa_key_load_private(&key,
keybuf, sizeof(keybuf),
tc->n.val, tc->n.len,
tc->e.val, tc->e.len,
tc->d.val, tc->d.len,
tc->p.val, tc->p.len,
tc->q.val, tc->q.len,
tc->u.val, tc->u.len,
tc->dP.val, tc->dP.len,
tc->dQ.val, tc->dQ.len)) != HAL_OK) {
printf("RSA CRT key load failed: %s\n", hal_error_string(err));
return 0;
}
uint8_t result[tc->n.len];
if ((err = hal_rsa_decrypt(core, key, tc->m.val, tc->m.len, result, sizeof(result))) != HAL_OK)
printf("RSA CRT failed: %s\n", hal_error_string(err));
const int mismatch = (err == HAL_OK && memcmp(result, tc->s.val, tc->s.len) != 0);
if (mismatch)
printf("MISMATCH\n");
hal_rsa_key_clear(key);
return err == HAL_OK && !mismatch;
}
/*
* Run one RSA key generation + CRT test.
*/
static int test_gen(const hal_core_t *core,
const char * const kind,
const rsa_tc_t * const tc)
{
printf("%s test for %lu-bit RSA key\n", kind, (unsigned long) tc->size);
char fn[sizeof("test-rsa-key-xxxxxx.der")];
uint8_t keybuf1[hal_rsa_key_t_size], keybuf2[hal_rsa_key_t_size];
hal_rsa_key_t *key1 = NULL, *key2 = NULL;
hal_error_t err = HAL_OK;
FILE *f;
const uint8_t f4[] = { 0x01, 0x00, 0x01 };
if ((err = hal_rsa_key_gen(core, &key1, keybuf1, sizeof(keybuf1), bitsToBytes(tc->size), f4, sizeof(f4))) != HAL_OK) {
printf("RSA key generation failed: %s\n", hal_error_string(err));
return 0;
}
size_t der_len = 0;
if ((err = hal_rsa_key_to_der(key1, NULL, &der_len, 0)) != HAL_OK) {
printf("Getting DER length of RSA key failed: %s\n", hal_error_string(err));
return 0;
}
uint8_t der[der_len];
if ((err = hal_rsa_key_to_der(key1, der, &der_len, sizeof(der))) != HAL_OK) {
printf("Converting RSA key to DER failed: %s\n", hal_error_string(err));
return 0;
}
if ((err = hal_rsa_key_from_der(&key2, keybuf2, sizeof(keybuf2), der, sizeof(der))) != HAL_OK) {
printf("Converting RSA key back from DER failed: %s\n", hal_error_string(err));
return 0;
}
if (memcmp(keybuf1, keybuf2, hal_rsa_key_t_size) != 0) {
printf("RSA key mismatch after conversion to and back from DER\n");
return 0;
}
snprintf(fn, sizeof(fn), "test-rsa-key-%04lu.der", (unsigned long) tc->size);
printf("Writing %s\n", fn);
if ((f = fopen(fn, "wb")) == NULL) {
printf("Couldn't open %s: %s\n", fn, strerror(errno));
return 0;
}
if (fwrite(der, der_len, 1, f) != 1) {
printf("Length mismatch writing %s\n", fn);
return 0;
}
if (fclose(f) == EOF) {
printf("Couldn't close %s: %s\n", fn, strerror(errno));
return 0;
}
uint8_t result[tc->n.len];
if ((err = hal_rsa_decrypt(core, key1, tc->m.val, tc->m.len, result, sizeof(result))) != HAL_OK)
printf("RSA CRT failed: %s\n", hal_error_string(err));
snprintf(fn, sizeof(fn), "test-rsa-sig-%04lu.der", (unsigned long) tc->size);
printf("Writing %s\n", fn);
if ((f = fopen(fn, "wb")) == NULL) {
printf("Couldn't open %s: %s\n", fn, strerror(errno));
return 0;
}
if (fwrite(result, sizeof(result), 1, f) != 1) {
printf("Length mismatch writing %s key\n", fn);
return 0;
}
if (fclose(f) == EOF) {
printf("Couldn't close %s: %s\n", fn, strerror(errno));
return 0;
}
if (err != HAL_OK) /* Deferred failure from hal_rsa_decrypt(), above */
return 0;
if ((err = hal_rsa_encrypt(core, key1, result, sizeof(result), result, sizeof(result))) != HAL_OK)
printf("RSA signature check failed: %s\n", hal_error_string(err));
const int mismatch = (err == HAL_OK && memcmp(result, tc->m.val, tc->m.len) != 0);
if (mismatch)
printf("MISMATCH\n");
hal_rsa_key_clear(key1);
hal_rsa_key_clear(key2);
return err == HAL_OK && !mismatch;
}
/*
* Time a test.
*/
static void _time_check(const struct timeval t0, const int ok)
{
struct timeval t;
gettimeofday(&t, NULL);
t.tv_sec -= t0.tv_sec;
t.tv_usec = t0.tv_usec;
if (t.tv_usec < 0) {
t.tv_usec += 1000000;
t.tv_sec -= 1;
}
printf("Elapsed time %lu.%06lu seconds, %s\n",
(unsigned long) t.tv_sec,
(unsigned long) t.tv_usec,
ok ? "OK" : "FAILED");
}
#define time_check(_expr_) \
do { \
struct timeval _t; \
gettimeofday(&_t, NULL); \
int _ok = (_expr_); \
_time_check(_t, _ok); \
ok &= _ok; \
} while (0)
/*
* Test signature and exponentiation for one RSA keypair using
* precompiled test vectors, then generate a key of the same length
* and try generating a signature with that.
*/
static int test_rsa(const hal_core_t *core, const rsa_tc_t * const tc)
{
int ok = 1;
/* RSA encryption */
time_check(test_modexp(core, "Verification", tc, &tc->s, &tc->e, &tc->m));
/* Brute force RSA decryption */
time_check(test_modexp(core, "Signature (ModExp)", tc, &tc->m, &tc->d, &tc->s));
/* RSA decyrption using CRT */
time_check(test_decrypt(core, "Signature (CRT)", tc));
/* Key generation and CRT -- not test vector, so writes key and sig to file */
time_check(test_gen(core, "Generation and CRT", tc));
return ok;
}
int main(int argc, char *argv[])
{
const hal_core_t *core = hal_core_find(MODEXPS6_NAME, NULL);
const hal_core_info_t *core_info = hal_core_info(core);
if (core_info != NULL)
printf("\"%8.8s\" \"%4.4s\"\n\n", core_info->name, core_info->version);
/*
* Run the test cases.
*/
hal_modexp_set_debug(1);
/* Normal test */
for (int i = 0; i < (sizeof(rsa_tc)/sizeof(*rsa_tc)); i++)
if (!test_rsa(core, &rsa_tc[i]))
return 1;
return 0;
}
/*
* Local variables:
* indent-tabs-mode: nil
* End:
*/