/*
* modexp.c
* ----------
* Wrapper around Cryptech ModExp core.
*
* This doesn't do full RSA, that's another module. This module's job
* is just the I/O to get bits in and out of the ModExp core, including
* compensating for a few known bugs that haven't been resolved yet.
*
* If at some point the interface to the ModExp core becomes simple
* enough that this module is no longer needed, it will go away.
*
* Authors: Rob Austein
* Copyright (c) 2015, SUNET
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <assert.h>
#include "cryptech.h"
/*
* Whether we want debug output.
*/
static int debug = 0;
void hal_modexp_set_debug(const int onoff)
{
debug = onoff;
}
/*
* Check a result, report on failure if debugging, pass failures up
* the chain.
*/
#define check(_expr_) \
do { \
hal_error_t _err = (_expr_); \
if (_err != HAL_OK && debug) \
printf("%s failed: %s\n", #_expr_, hal_error_string(_err)); \
if (_err != HAL_OK) \
return _err; \
} while (0)
/*
* Set an ordinary register.
*/
static hal_error_t set_register(const off_t addr,
uint32_t value)
{
uint8_t w[4];
int i;
for (i = 3; i >= 0; i--) {
w[i] = value & 0xFF;
value >>= 8;
}
return hal_io_write(addr, w, sizeof(w));
}
/*
* Get value of a block memory.
*/
static hal_error_t get_blockmem(const off_t reset_addr,
const off_t data_addr,
uint8_t *value,
const size_t length,
const size_t io_len)
{
uint8_t discard[4];
size_t i;
assert(value != NULL && length % 4 == 0);
assert(io_len >= length && io_len % 4 == 0);
check(set_register(reset_addr, 1));
for (i = 0; i < io_len - length; i += 4) {
check(hal_io_read(data_addr, discard, 4));
if (discard[0] != 0 || discard[1] != 0 || discard[2] != 0 || discard[3] != 0)
return HAL_ERROR_IO_UNEXPECTED;
}
for (i = 0; i < length; i += 4)
check(hal_io_read(data_addr, &value[i], 4));
return HAL_OK;
}
/*
* Set value of a block memory.
*/
static hal_error_t set_blockmem(const off_t reset_addr,
const off_t data_addr,
const uint8_t * const value,
const size_t length,
const size_t io_len)
{
const uint8_t zero[4] = { 0, 0, 0, 0 };
size_t i;
assert(value != NULL && length % 4 == 0);
assert(io_len >= length && io_len % 4 == 0);
check(set_register(reset_addr, 1));
for (i = 0; i < io_len - length; i += 4)
check(hal_io_write(data_addr, zero, 4));
for (i = 0; i < length; i += 4)
check(hal_io_write(data_addr, &value[i], 4));
return HAL_OK;
}
/*
* Run one modexp operation.
*/
hal_error_t hal_modexp(const uint8_t * const msg, const size_t msg_len, /* Message */
const uint8_t * const exp, const size_t exp_len, /* Exponent */
const uint8_t * const mod, const size_t mod_len, /* Modulus */
uint8_t *result, const size_t result_len)
{
/*
* All pointers must be set, neither message nor exponent may be
* longer than modulus, result buffer must not be shorter than
* modulus, and all input lengths must be a multiple of four.
*
* The multiple-of-four restriction is a pain, but the rest of the
* HAL code currently enforces the same restriction, and allowing
* arbitrary lengths would require some tedious shuffling to deal
* with alignment issues, so it's not worth trying to fix only here.
*/
if (msg == NULL || exp == NULL || mod == NULL || result == NULL ||
msg_len > mod_len || exp_len > mod_len || result_len < mod_len ||
((msg_len | exp_len | mod_len) & 3) != 0)
return HAL_ERROR_BAD_ARGUMENTS;
/*
* This insanity is a work-around for a current bug in the ModExp
* core: we have to zero-pad everything out to the size of the
* modulus plus 32-bits. Some kind of overflow issue. All of this
* "io_len" nonsense can go away once that's fixed.
*/
const size_t io_len = mod_len + 4;
assert((io_len & 3) == 0);
check(set_blockmem(MODEXP_MODULUS_PTR_RST, MODEXP_MODULUS_DATA, mod, mod_len, io_len));
check(set_blockmem(MODEXP_MESSAGE_PTR_RST, MODEXP_MESSAGE_DATA, msg, msg_len, io_len));
check(set_register(MODEXP_MODULUS_LENGTH, /* mod_len */ io_len / 4));
check(set_blockmem(MODEXP_EXPONENT_PTR_RST, MODEXP_EXPONENT_DATA, exp, exp_len, io_len));
check(set_register(MODEXP_EXPONENT_LENGTH, /* exp_len */ io_len / 4));
check(hal_io_wait_ready(MODEXP_ADDR_STATUS));
check(set_register(MODEXP_ADDR_CTRL, 1));
/*
* ModExp core is not very fast (yet), so wait a long time for a
* response, but not forever.
*/
int timeout = 0x7FFFFFFF;
check(hal_io_wait(MODEXP_ADDR_STATUS, STATUS_READY, &timeout));
check(get_blockmem(MODEXP_RESULT_PTR_RST, MODEXP_RESULT_DATA, result, mod_len, io_len));
return HAL_OK;
}
/*
* Local variables:
* indent-tabs-mode: nil
* End:
*/
