/*
* hal_io_i2c.c
* ------------
* This module contains common code to talk to the FPGA over the I2C bus.
*
* Author: Paul Selkirk
* Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* - Neither the name of the NORDUnet nor the names of its contributors may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <stdint.h>
#include "hal.h"
#include "hal_internal.h"
#define I2C_dev "/dev/i2c-2"
#define I2C_addr 0x0f
#define I2C_SLAVE 0x0703
static int debug = 0;
static int i2cfd = -1;
void hal_io_set_debug(int onoff)
{
debug = onoff;
}
static void dump(char *label, const uint8_t *buf, size_t len)
{
if (debug) {
int i;
printf("%s [", label);
for (i = 0; i < len; ++i)
printf(" %02x", buf[i]);
printf(" ]\n");
}
}
static void i2c_close(void)
{
(void) close(i2cfd);
}
static hal_error_t i2c_open(void)
{
int fd = -1;
if (i2cfd >= 0)
return HAL_OK;
/* It's dead, Jim, you can stop kicking it now */
if (i2cfd < -1)
return HAL_ERROR_IO_SETUP_FAILED;
fd = open(I2C_dev, O_RDWR);
if (fd < 0) {
if (debug)
perror("Unable to open %s: " I2C_dev);
goto fail;
}
if (ioctl(fd, I2C_SLAVE, I2C_addr) < 0) {
if (debug)
perror("Unable to set I2C slave device");
goto fail;
}
if (atexit(i2c_close) < 0) {
if (debug)
perror("Unable to set I2C atexit handler");
goto fail;
}
i2cfd = fd;
return HAL_OK;
fail:
if (fd >= 0)
close(fd);
i2cfd = -2;
return HAL_ERROR_IO_SETUP_FAILED;
}
static hal_error_t i2c_write(const uint8_t *buf, size_t len)
{
hal_error_t err;
if ((err = i2c_open()) != HAL_OK)
return err;
dump("write ", buf, len);
if (write(i2cfd, buf, len) != len) {
if (debug)
perror("i2c write failed");
return HAL_ERROR_IO_OS_ERROR;
}
return HAL_OK;
}
static hal_error_t i2c_read(uint8_t *b)
{
hal_error_t err;
if ((err = i2c_open()) != HAL_OK)
return err;
/*
* read() on the i2c device only returns one byte at a time,
* and hal_io_get_resp() needs to parse the response one byte at a time
*/
if (read(i2cfd, b, 1) != 1) {
if (debug)
perror("i2c read failed");
return HAL_ERROR_IO_OS_ERROR;
}
return 0;
}
/* coretest command codes */
#define SOC 0x55
#define EOC 0xaa
#define READ_CMD 0x10
#define WRITE_CMD 0x11
#define RESET_CMD 0x01
/* coretest response codes */
#define SOR 0xaa
#define EOR 0x55
#define READ_OK 0x7f
#define WRITE_OK 0x7e
#define RESET_OK 0x7d
#define UNKNOWN 0xfe
#define ERROR 0xfd
static hal_error_t hal_io_send_write_cmd(hal_addr_t offset, const uint8_t *data)
{
uint8_t buf[9] = { SOC, WRITE_CMD, (offset >> 8) & 0xff, offset & 0xff,
data[0], data[1], data[2], data[3], EOC };
return i2c_write(buf, sizeof(buf));
}
static hal_error_t hal_io_send_read_cmd(hal_addr_t offset)
{
uint8_t buf[5] = { SOC, READ_CMD, (offset >> 8) & 0xff, offset & 0xff, EOC };
return i2c_write(buf, sizeof(buf));
}
static hal_error_t hal_io_get_resp(uint8_t *buf, size_t len)
{
hal_error_t err;
int i;
for (i = 0; i < len; ++i) {
if ((err = i2c_read(&buf[i])) != HAL_OK)
return err;
if ((i == 0) && (buf[i] != SOR))
/* We've gotten out of sync, and there's probably nothing we can do */
return HAL_ERROR_IO_UNEXPECTED;
if (i == 1) { /* response code */
switch (buf[i]) {
case READ_OK:
len = 9;
break;
case WRITE_OK:
len = 5;
break;
case RESET_OK:
len = 3;
break;
case ERROR:
case UNKNOWN:
len = 4;
break;
default:
/* we've gotten out of sync, and there's probably nothing we can do */
return HAL_ERROR_IO_UNEXPECTED;
}
}
}
dump("read ", buf, len);
return HAL_OK;
}
static hal_error_t hal_io_compare(uint8_t *buf, const uint8_t *expected, size_t len)
{
size_t i;
/* start at byte 1 because SOR has already been tested */
for (i = 1; i < len; ++i) {
if (buf[i] != expected[i])
return HAL_ERROR_IO_UNEXPECTED;
}
return HAL_OK;
}
static hal_error_t hal_io_get_write_resp(hal_addr_t offset)
{
uint8_t buf[5];
uint8_t expected[5] = { SOR, WRITE_OK, (offset >> 8) & 0xff, offset & 0xff, EOR };
hal_error_t err;
if ((err = hal_io_get_resp(buf, sizeof(buf))) != HAL_OK)
return err;
return hal_io_compare(buf, expected, sizeof(expected));
}
static hal_error_t hal_io_get_read_resp(hal_addr_t offset, uint8_t *data)
{
uint8_t buf[9];
uint8_t expected[4] = { SOR, READ_OK, (offset >> 8) & 0xff, offset & 0xff };
hal_error_t err;
if ((err = hal_io_get_resp(buf, sizeof(buf))) != HAL_OK ||
(err = hal_io_compare(buf, expected, 4)) != HAL_OK)
return err;
if (buf[8] != EOR)
return HAL_ERROR_IO_UNEXPECTED;
data[0] = buf[4];
data[1] = buf[5];
data[2] = buf[6];
data[3] = buf[7];
return HAL_OK;
}
hal_error_t hal_io_write(const hal_core_t *core, hal_addr_t offset, const uint8_t *buf, size_t len)
{
hal_error_t err;
if (core == NULL)
return HAL_ERROR_CORE_NOT_FOUND;
offset += hal_core_base(core);
for (; len > 0; offset++, buf += 4, len -= 4)
if ((err = hal_io_send_write_cmd(offset, buf)) != HAL_OK ||
(err = hal_io_get_write_resp(offset)) != HAL_OK)
return err;
return HAL_OK;
}
hal_error_t hal_io_read(const hal_core_t *core, hal_addr_t offset, uint8_t *buf, size_t len)
{
hal_error_t err;
if (core == NULL)
return HAL_ERROR_CORE_NOT_FOUND;
offset += hal_core_base(core);
for (; len > 0; offset++, buf += 4, len -= 4)
if ((err = hal_io_send_read_cmd(offset)) != HAL_OK ||
(err = hal_io_get_read_resp(offset, buf)) != HAL_OK)
return err;
return HAL_OK;
}
/*
* Local variables:
* indent-tabs-mode: nil
* End:
*/