From ca1a5cbba8fb1eb6f26ba07565f5fa3b53e2c2d7 Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Sat, 30 Jan 2016 19:20:13 +0100 Subject: First set of updates based on review feedback. --- eagle/alpha/rev02/rev02.brd | 911 +++++---- eagle/alpha/rev02/rev02.pdf | Bin 715076 -> 708746 bytes eagle/alpha/rev02/rev02.sch | 4411 +++++++++++++++++++++---------------------- eagle/lbr/Alpha-IC.lbr | 28 +- eagle/lbr/Alpha-Power.lbr | 457 ++--- 5 files changed, 2945 insertions(+), 2862 deletions(-) (limited to 'eagle') diff --git a/eagle/alpha/rev02/rev02.brd b/eagle/alpha/rev02/rev02.brd index 75b2f7e..4f3678b 100644 --- a/eagle/alpha/rev02/rev02.brd +++ b/eagle/alpha/rev02/rev02.brd @@ -3350,44 +3350,44 @@ http://www.semiconductors.philips.com/pip/2N7002T.html<br> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -3414,74 +3414,74 @@ http://www.semiconductors.philips.com/pip/2N7002T.html<br> Altera EN5364QI 68-pin QFP - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -3545,14 +3545,14 @@ http://www.semiconductors.philips.com/pip/2N7002T.html<br> NDY(11) - - - - - - - - + + + + + + + + @@ -3560,10 +3560,10 @@ http://www.semiconductors.philips.com/pip/2N7002T.html<br> >NAME >VALUE - - - - + + + + @@ -5644,12 +5644,12 @@ Based on the following sources: - + - + @@ -6184,7 +6184,6 @@ Based on the following sources: - @@ -6691,7 +6690,7 @@ Based on the following sources: - + @@ -6737,10 +6736,10 @@ Based on the following sources: - + - + @@ -6907,9 +6906,6 @@ Based on the following sources: - - - @@ -6923,7 +6919,7 @@ Based on the following sources: - + @@ -6942,6 +6938,7 @@ Based on the following sources: + @@ -7461,56 +7458,56 @@ Based on the following sources: - - - - + + + + - - + + - + - - - - + + + + - - + + - + - - - - - - - - - - - - - + + + + + + + + + + + + + - - + + - - + + @@ -7523,10 +7520,9 @@ Based on the following sources: - - + + - @@ -7545,7 +7541,7 @@ Based on the following sources: - + @@ -7638,9 +7634,7 @@ Based on the following sources: - - @@ -7662,6 +7656,11 @@ Based on the following sources: + + + + + @@ -7690,9 +7689,7 @@ Based on the following sources: - - - + @@ -7704,6 +7701,8 @@ Based on the following sources: + + @@ -7740,55 +7739,125 @@ Based on the following sources: - + + - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + - - + - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -7844,10 +7913,6 @@ Based on the following sources: - - - - @@ -8055,8 +8120,6 @@ Based on the following sources: - - @@ -9790,7 +9853,6 @@ Based on the following sources: - @@ -9802,7 +9864,6 @@ Based on the following sources: - @@ -9855,15 +9916,7 @@ Based on the following sources: - - - - - - - - @@ -9904,8 +9957,6 @@ Based on the following sources: - - @@ -10035,7 +10086,6 @@ Based on the following sources: - @@ -10061,30 +10111,159 @@ Based on the following sources: - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - + - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -10135,117 +10314,11 @@ Based on the following sources: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + @@ -10269,7 +10342,9 @@ Based on the following sources: + + @@ -10397,8 +10472,6 @@ Based on the following sources: - - @@ -10538,7 +10611,7 @@ Based on the following sources: - + @@ -10546,42 +10619,42 @@ Based on the following sources: - - - - - - - - - - - + + + + + + + + + + + - + - + - - - - + + + + - - - - + + + + @@ -10622,7 +10695,7 @@ Based on the following sources: - + @@ -10632,22 +10705,22 @@ Based on the following sources: - + - + - - - - - - - + + + + + + + @@ -10667,7 +10740,7 @@ Based on the following sources: - + @@ -10675,7 +10748,7 @@ Based on the following sources: - + @@ -10684,28 +10757,28 @@ Based on the following sources: - + - + - + - - - - - - - + + + + + + + @@ -10725,7 +10798,7 @@ Based on the following sources: - + @@ -10733,7 +10806,7 @@ Based on the following sources: - + @@ -10743,16 +10816,16 @@ Based on the following sources: - + - + - + @@ -10761,7 +10834,7 @@ Based on the following sources: - + @@ -10770,27 +10843,27 @@ Based on the following sources: - + - + - - - - - - - - - + + + + + + + + + @@ -10815,7 +10888,7 @@ Based on the following sources: - + @@ -10835,26 +10908,21 @@ Based on the following sources: - + - - - - - - + - + @@ -10877,11 +10945,11 @@ Based on the following sources: - + - + @@ -11311,6 +11379,11 @@ Based on the following sources: + + + + + diff --git a/eagle/alpha/rev02/rev02.pdf b/eagle/alpha/rev02/rev02.pdf index ee1d035..650b659 100644 Binary files a/eagle/alpha/rev02/rev02.pdf and b/eagle/alpha/rev02/rev02.pdf differ diff --git a/eagle/alpha/rev02/rev02.sch b/eagle/alpha/rev02/rev02.sch index 22b564e..987d85c 100644 --- a/eagle/alpha/rev02/rev02.sch +++ b/eagle/alpha/rev02/rev02.sch @@ -8,24 +8,24 @@ - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + @@ -34,8 +34,8 @@ - - + + @@ -43,19 +43,19 @@ - - - - - - - - - - - - - + + + + + + + + + + + + + @@ -23287,7 +23287,7 @@ EAGLE CAD Libraries on element14</a> - + @@ -23297,7 +23297,7 @@ EAGLE CAD Libraries on element14</a> - + @@ -23337,7 +23337,7 @@ EAGLE CAD Libraries on element14</a> - + @@ -28810,44 +28810,44 @@ W = angled<p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -28874,74 +28874,74 @@ W = angled<p> Altera EN5364QI 68-pin QFP - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -29005,14 +29005,14 @@ W = angled<p> NDY(11) - - - - - - - - + + + + + + + + @@ -29020,10 +29020,10 @@ W = angled<p> >NAME >VALUE - - - - + + + + @@ -29053,63 +29053,64 @@ W = angled<p> - - - - - - - - - - - + + + + + + + + + + + >NAME >VALUE + - - - - - - - - + + + + + + + + >NAME >VALUE - - - - - - - - - - - + + + + + + + + + + + + - + - - - - - - - + + + + + + >VALUE >NAME - - + + @@ -29136,17 +29137,18 @@ Voltage Mode Synchronous PWM Buck with Integrated Inductor - - - - - - - - - - - + + + + + + + + + + + + @@ -29169,25 +29171,26 @@ With Integrated Inductor - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + @@ -29206,20 +29209,19 @@ Power Module With 36-V Maximum Input Voltage http://www.ti.com/lit/ds/symlink/lmz13608.pdf - + - - - - - - - - - + + + + + + + + @@ -34217,17 +34219,17 @@ Auto generated by <i>make-symbol-device-package-bsdl.ulp Rev. 44</i> - - - + + + - - - + + + - + @@ -34257,8 +34259,8 @@ Auto generated by <i>make-symbol-device-package-bsdl.ulp Rev. 44</i> - - + + @@ -34266,10 +34268,10 @@ Auto generated by <i>make-symbol-device-package-bsdl.ulp Rev. 44</i> >NAME >VALUE - - - - + + + + @@ -35408,7 +35410,6 @@ Based on the following sources: - @@ -35440,10 +35441,10 @@ Based on the following sources: - + - + @@ -35963,7 +35964,6 @@ Based on the following sources: - @@ -36023,7 +36023,6 @@ Based on the following sources: - @@ -36520,7 +36519,7 @@ Based on the following sources: - + @@ -36533,7 +36532,6 @@ Based on the following sources: - @@ -36610,10 +36608,10 @@ Based on the following sources: - + - + @@ -36802,10 +36800,6 @@ Based on the following sources: - - - - @@ -36813,7 +36807,6 @@ Based on the following sources: - @@ -36824,7 +36817,7 @@ Based on the following sources: - + @@ -36855,6 +36848,9 @@ Based on the following sources: + + + @@ -36948,13 +36944,12 @@ be allowed to turn off the entropy source - - - - + + + + - - + @@ -37015,7 +37010,6 @@ be allowed to turn off the entropy source - @@ -37037,9 +37031,6 @@ be allowed to turn off the entropy source - - - @@ -37097,12 +37088,7 @@ be allowed to turn off the entropy source - - - - - - + @@ -37271,17 +37257,9 @@ be allowed to turn off the entropy source - + - - - - - - - - - + @@ -37331,12 +37309,10 @@ be allowed to turn off the entropy source - + - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + @@ -38209,6 +38188,26 @@ One 10uF bypass cap for the package. + + + + + + + + + + + + + + + + + + + + @@ -38274,25 +38273,6 @@ One 10uF bypass cap for the package. - - - - - - - - - - @@ -38391,34 +38371,38 @@ One 10uF bypass cap for the package. - - - - - - - - - - - - - - @@ -38982,22 +38966,22 @@ with equivalent functionality pins. - - - - - - @@ -39073,64 +39057,64 @@ with equivalent functionality pins. - - - - - - - - - - - - - - - - - - @@ -39211,6 +39195,13 @@ with equivalent functionality pins. @@ -40296,16 +40287,11 @@ wrapped with the master key. - - - - - - - - + + + + - @@ -40313,7 +40299,6 @@ wrapped with the master key. - @@ -40326,20 +40311,10 @@ wrapped with the master key. - - - - - - - - - - @@ -40348,8 +40323,9 @@ wrapped with the master key. - + + @@ -40361,10 +40337,10 @@ wrapped with the master key. - - - + + + @@ -40372,7 +40348,10 @@ wrapped with the master key. - + + + + @@ -40611,24 +40590,10 @@ VBAT to the STM32 and use the internal RTC? 6.1 USB Bus Powered Configuration copy of reference circuit Place close to FT232 -Do we need more speed? - -Joachim expressed that we might need a faster interconnect -to the Alpha than the 12 Mbaud the FT232H can deliver -in UART mode (in an e-mail to tech@ 2015-08-18). - -An alternative is to connect all of the ADBUS (and more) to -the ARM, and use one of the faster modes this chip supports -(fastest: synchronous FT245 parallel FIFO at 40 Mbyte/s). - -Enabling the faster modes requires the addition of an EEPROM -that can be configured from the host (yuck) though. - -This requirement also applies to using our own USB VID/PID. - - CL 10pF -XXX EEPROM for USB settings or not? +XXX Add EEPROM for USB settings. + +Plan for now is to not populate it on the Alpha though. Application access USB UART @@ -40652,12 +40617,13 @@ This requirement also applies to using our own USB VID/PID. - + - + + @@ -40669,14 +40635,15 @@ This requirement also applies to using our own USB VID/PID. - - + + + - - - + + + @@ -40723,18 +40690,20 @@ This requirement also applies to using our own USB VID/PID. - - + + + - - + + + - - - + + + - - + + @@ -40874,16 +40843,16 @@ This requirement also applies to using our own USB VID/PID. - - + + - - + + - - + + - + @@ -41038,17 +41007,17 @@ This requirement also applies to using our own USB VID/PID. - + - - + + - - + + - - - @@ -41189,7 +41158,9 @@ copy of reference circuit Place close to FT232 CL 10pF Management access USB UART -XXX EEPROM for USB settings or not? +XXX Add EEPROM for USB settings. + +Plan for now is to not populate it on the Alpha though. @@ -41212,12 +41183,13 @@ copy of reference circuit - + - + + @@ -41229,14 +41201,15 @@ copy of reference circuit - - + + + - - - + + + @@ -41283,18 +41256,20 @@ copy of reference circuit - - + + + - - + + + - - - + + + - - + + @@ -41434,16 +41409,16 @@ copy of reference circuit - - + + - - + + - - + + - + @@ -41586,17 +41561,17 @@ copy of reference circuit - + - - + + - - + + - - - @@ -41747,7 +41722,9 @@ Master Key Memory AVR Tiny Tamper Detect MCU Panic button Expansion GPIO -Place a jumper between pins 1-2 +Connector for external 3V3 battery. + +Place a jumper between pins 1-2 to "emulate" having a battery present. AVR_GPIO* AVR_LED*, AVR_PANIC and FPGA_GPIO_TAMPER* can be swapped. @@ -41765,21 +41742,22 @@ to "emulate" having a battery present. - - + + - - - - - + + + + + - + + @@ -41844,8 +41822,8 @@ to "emulate" having a battery present. - - + + @@ -41940,16 +41918,16 @@ to "emulate" having a battery present. - - + + - - + + @@ -43020,6 +42998,7 @@ ARM to configure the FPGA + @@ -43220,9 +43199,8 @@ ARM to configure the FPGA - - @@ -43324,6 +43302,13 @@ ARM to configure the FPGA + + + + + + + @@ -43431,14 +43416,14 @@ MRCC differential pairs) - - @@ -43765,179 +43750,182 @@ MRCC differential pairs) - - - - - - - - - - - - - - - - - - - - - - - + + + @@ -43945,8 +43933,8 @@ MRCC differential pairs) FPGA voltage regulators -*) FPGA Power Subsystem -- AUX and I/O -*) VCCAUX = 0.75V x (1 + 205 / 147) = 1.796V +*) FPGA Power Subsystem -- AUX and I/O +*) VCCAUX = 0.75V x (1 + 205 / 147) = 1.796V *) VCCO = 0.75V x (1 + 205 / 59) = 3.356 @@ -43956,104 +43944,104 @@ MRCC differential pairs) *) Light-load mode is enabled -This is the 3V3 rail that powers +This is the 3V3 rail that powers both the FPGA and the ARM as well as various other components. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -44061,142 +44049,142 @@ as various other components. - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - - - - - - + + - - - - - - - - - + + - + - + - + - - - - - - - + + + + + + + - - - + + + - - + + @@ -44252,21 +44240,21 @@ as various other components. - + - - - - + + + + - + - - + + @@ -44274,38 +44262,38 @@ as various other components. - - + + - + - + - + - - - - - - - + + + + + + + - - - + + + - - + + @@ -44313,40 +44301,40 @@ as various other components. - + - - - - + + + + - + - - - - - - - - - @@ -44361,9 +44349,12 @@ of the two available MRCC differential pairs) *) FPGA_GPIO_* and FPGA_IRQ_N_* signals can be swapped *) Signals, that are allowed to be swapped, can be be swapped with each other and/or moved to different pins within their bank. -FPGA_GPIO_B* is blue LEDs in Alpha -block diagram. Suggest pin header instead -for more versatility. +NOTE: One of the FPGA_GPIO_* pins +should be connected to one of the +MRCC pins. +NOTE: GPIO pins should be +length matched to support +I/O at XXX MHz (pavel) @@ -44869,23 +44860,23 @@ for more versatility. FPGA MKM interface -*) Lower Right Bank -DIGITIZED_NOISE signal should go into +*) Lower Right Bank +DIGITIZED_NOISE signal should go into either W19 or Y18 (i.e. into one of the two positive (master) sides of the two available MRCC differential pairs) -*) Signals, that are allowed to be swapped, can be be swapped +*) Signals, that are allowed to be swapped, can be be swapped with each other and/or moved to different pins within their bank. -<-- FPGA_GPIO_* and FPGA_IRQ_N_* signals can be swapped -<-- Disable pull-ups on all pins during configuration +<-- FPGA_GPIO_* and FPGA_IRQ_N_* signals can be swapped +<-- Disable pull-ups on all pins during configuration - - - - + + + + - + @@ -44893,126 +44884,126 @@ with each other and/or moved to different pins within their bank. - - - - - - - - - - - - - - - - - - - - + + - - - - - - - - - - - - - - - - - - - - - @@ -45020,21 +45011,21 @@ with each other and/or moved to different pins within their bank. FPGA power and ground -*) Power - AUX -*) Power - CORE & BRAM -*) Ground Pins +*) Power - AUX +*) Power - CORE & BRAM +*) Ground Pins - - - - - - - - - - + + + + + + + + + + @@ -45042,452 +45033,452 @@ with each other and/or moved to different pins within their bank. - + - + - - - + + + - - - + + + - - - - - + + + + + - - + + - - + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - - - + + + - + - + - - - + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - - + + - + - - - - - - + + - - - - + + + + - - + + - - + + - - - - - @@ -45496,276 +45487,276 @@ with each other and/or moved to different pins within their bank. FPGA CORE and AUX capacitors -<-- Place small 0.47 uF caps right under the BGA package +<-- Place small 0.47 uF caps right under the BGA package <-- Place medium 4.7 uF caps very close to the BGA package <-- Place large 47 uF and 330 uF caps not far from the BGA package <-- Distribute smaller caps evenly under the BGA package <-- Distribute larger caps evenly around the BGA package -*) Decoupling capacitors for VCCINT and VCCBRAM -<-- Place small 0.47 uF caps right under the BGA package +*) Decoupling capacitors for VCCINT and VCCBRAM +<-- Place small 0.47 uF caps right under the BGA package <-- Place medium 4.7 uF caps very close to the BGA package <-- Place large 47 uF caps not far from the BGA package <-- Try to place smaller caps next to FPGA balls -*) Decoupling capacitors for VCCAUX +*) Decoupling capacitors for VCCAUX - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -45774,243 +45765,243 @@ with each other and/or moved to different pins within their bank. - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - - - @@ -46171,257 +46162,257 @@ with each other and/or moved to different pins within their bank. FPGA VCCO bypass capacitors -<-- Place small 0.47 uF caps right under the BGA package +<-- Place small 0.47 uF caps right under the BGA package <-- Place medium 4.7 uF caps very close to the BGA package <-- Place large 47 uF caps not far from the BGA package <-- Place one of four 47 uF caps on every side of the BGA package <-- Distribute six sets of caps among six FPGA I/O banks -*) Decoupling capacitors for VCCO +*) Decoupling capacitors for VCCO - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -46429,333 +46420,333 @@ with each other and/or moved to different pins within their bank. - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - @@ -46805,8 +46796,8 @@ with each other and/or moved to different pins within their bank. FPGA CORE voltage regulator -*) FPGA Power Subsystem -- CORE -*) VCCINT = 0.6V x (1 + 150 / 226) = 0.998V +*) FPGA Power Subsystem -- CORE +*) VCCINT = 0.6V x (1 + 150 / 226) = 0.998V *) OCP_ADJ is not used (default over-current threshold) @@ -46824,64 +46815,64 @@ with each other and/or moved to different pins within their bank. load of 100 Ohms just in case (gives 10 mA) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -46898,82 +46889,82 @@ load of 100 Ohms just in case (gives 10 mA) - + - + - + - + - + - + - + - - - - - - + @@ -46981,54 +46972,54 @@ load of 100 Ohms just in case (gives 10 mA) - - + + - - - - - - + + - + - - - + + + - - - + + + - - - - - - - + + + + + + + - - - + + + - - + + @@ -47037,15 +47028,15 @@ load of 100 Ohms just in case (gives 10 mA) - + - + - - - + + + - + @@ -47053,7 +47044,7 @@ load of 100 Ohms just in case (gives 10 mA) FPGA power sequencing -*) Recommended power-up sequence: +*) Recommended power-up sequence: 1) VCCINT @@ -47064,63 +47055,63 @@ load of 100 Ohms just in case (gives 10 mA) RC network values are preliminary, should be tweaked after experiments ----> ----> ----> ----> -*) "Power OK" LED, should be of green color +---> +---> +---> +---> +*) "Power OK" LED, should be of green color - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -47128,161 +47119,161 @@ should be tweaked after experiments - + - + - + - + - + - - - - - - - + - - - - - - + + - - - - - - + - - - + - - - + - + - + diff --git a/eagle/lbr/Alpha-IC.lbr b/eagle/lbr/Alpha-IC.lbr index 5b3663a..2e49578 100644 --- a/eagle/lbr/Alpha-IC.lbr +++ b/eagle/lbr/Alpha-IC.lbr @@ -6,7 +6,7 @@ - + @@ -1553,17 +1553,17 @@ Auto generated by <i>make-symbol-device-package-bsdl.ulp Rev. 44</i> - - - + + + - - - + + + - + @@ -1593,8 +1593,8 @@ Auto generated by <i>make-symbol-device-package-bsdl.ulp Rev. 44</i> - - + + @@ -1602,10 +1602,10 @@ Auto generated by <i>make-symbol-device-package-bsdl.ulp Rev. 44</i> >NAME >VALUE - - - - + + + + diff --git a/eagle/lbr/Alpha-Power.lbr b/eagle/lbr/Alpha-Power.lbr index 2070f32..8e34bcb 100644 --- a/eagle/lbr/Alpha-Power.lbr +++ b/eagle/lbr/Alpha-Power.lbr @@ -157,7 +157,7 @@ - + @@ -168,14 +168,14 @@ NDY(11) - - - - - - - - + + + + + + + + @@ -183,81 +183,81 @@ >NAME >VALUE - - - - + + + + Altera EN5364QI 68-pin QFP - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -320,44 +320,44 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -426,63 +426,65 @@ - - - - - - - + + + + + + + >VALUE >NAME - - + + - - - - - - - - + + + + + + + + >NAME >VALUE - - - - - - - - - - - + + + + + + + + + + + + - - - - - - - - - - - + + + + + + + + + + + >NAME >VALUE + @@ -498,6 +500,22 @@ >NAME >VALUE + + + + + + + + + + + +>VALUE +>NAME + + + @@ -510,7 +528,7 @@ - + @@ -531,15 +549,15 @@ - - - - - - - - - + + + + + + + + + @@ -555,20 +573,19 @@ Power Module With 36-V Maximum Input Voltage http://www.ti.com/lit/ds/symlink/lmz13608.pdf - + - - - - - - - - - + + + + + + + + @@ -591,25 +608,26 @@ With Integrated Inductor - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + @@ -631,17 +649,17 @@ Voltage Mode Synchronous PWM Buck with Integrated Inductor - - - - - - - - - - - + + + + + + + + + + + @@ -662,17 +680,18 @@ Voltage Mode Synchronous PWM Buck with Integrated Inductor - - - - - - - - - - - + + + + + + + + + + + + -- cgit v1.2.3