From 0e6e4994659c64b7f0ccde0bd7d54f9b302555ae Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Tue, 1 Dec 2015 10:36:22 +0100 Subject: remove components that will not be on the Alpha board --- eagle/alpha/rev02/rev02.brd | 5200 +++++++++++++++++++++++++++---------- eagle/alpha/rev02/rev02.sch | 5945 +------------------------------------------ 2 files changed, 3981 insertions(+), 7164 deletions(-) (limited to 'eagle') diff --git a/eagle/alpha/rev02/rev02.brd b/eagle/alpha/rev02/rev02.brd index 2b88d24..0c7755d 100644 --- a/eagle/alpha/rev02/rev02.brd +++ b/eagle/alpha/rev02/rev02.brd @@ -1,45 +1,45 @@ - + - + - + - + - + - + - + - + - + - + - + - + - + - + @@ -49,7 +49,7 @@ - + @@ -145,23 +145,15 @@ -https://cryptech.is/ -Novena STM32F429 dev-bridge -rev01 -rev 01 +https://cryptech.is/ +Alpha rev02 +rev 02 5V GND - - 3V3 GND pad -NOISE -3V3 -GND --15V -PWR -NOISY +NOISY DIODE @@ -1290,8 +1282,7 @@ for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trim </BODY></HTML> -<b>RESISTOR</b><p> -chip +<b>RESISTOR</b> @@ -1300,12 +1291,92 @@ chip ->NAME ->VALUE +>NAME +>VALUE + +<b>Chip Capacitor </b> Polar tantalum capacitors with solid electrolyte<p> +Siemens Matsushita Components B 45 194, B 45 197, B 45 198<br> +Source: www.farnell.com/datasheets/247.pdf + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b> + + + + + + + + +>NAME +>VALUE + + + + @@ -1393,115 +1464,6 @@ new: Attribute TP_SIGNAL_NAME<br> - - - -This is the receptable version used on Novena add-on boards, such as the GPBB. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME - - - <b>NPN Transistors</b><p> <author>Created by librarian@cadsoft.de</author> @@ -1557,26 +1519,6 @@ new: Attribute TP_SIGNAL_NAME<br> <p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. </p> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - <b>0805</b> @@ -1749,46 +1691,6 @@ Based on the following sources: - -<b>Maxim Components</b><p> - -<author>Created by librarian@cadsoft.de</author> - - -<b>Small Outline Package</b> SOIC 150 mil - - - - - - - - - - - - - - - - - - - - ->VALUE ->NAME - - - - - - - - - - - @@ -1870,44 +1772,6 @@ You are welcome to use this library for commercial purposes. For attribution, we - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - @@ -2033,47 +1897,6 @@ You are welcome to use this library for commercial purposes. For attribution, we - -Micro USB Package - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - @@ -3518,16 +3341,6 @@ Source: 008-0260-0_E.pdf - - - - - - - ->NAME ->VALUE - Tactile SMD mounted switch @@ -3555,35 +3368,6 @@ Source: 008-0260-0_E.pdf - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - @@ -4086,6 +3870,1074 @@ EAGLE CAD Libraries on element14</a> + +<b>CRYSTAL CLOCK OSCILLATORS</b><p> +5.0 Vdc or 3.3 Vdc - LOW PROFILE ULTRA MINIATURE CERAMIC SURFACE MOUNT<br> +Source: http://www.abracon.com/Oscillators/asf1-L-L1.pdf + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>FF484 FBG484</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>Small Outline Package</b> + + + + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + +<b>LEDs</b><p> +<author>Created by librarian@cadsoft.de</author><br> +Extended by Federico Battaglin <author>&lt;federico.rd@fdpinternational.com&gt;</author> with DUOLED + + +<b>Hyper CHIPLED Hyper-Bright LED</b><p> +LB Q993<br> +Source: http://www.osram.convergy.de/ ... Lb_q993.pdf + + + + +>NAME +>VALUE + + + + + + + + + +<b>Pin Headers</b><p> +Naming:<p> +MA = male<p> +# contacts - # rows<p> +W = angled<p> +<author>Created by librarian@cadsoft.de</author> + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 +>NAME +16 +>VALUE + + + + + + + + + + + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +1 +8 +>VALUE + + + + + + + + + + + + +<b>2N7002T; N-channel TrenchMOS FET</b><p> +Produced by Philips. All information is found at:<br> +http://www.semiconductors.philips.com/pip/2N7002T.html<br> +</p> +<author>Created by gudjon@mc2.chalmers.se</author> + + +<b>SOT-23</b> + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +Altera EN5364QI 68-pin QFP + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +NDY(11) + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +<b>R/C MASTER! - v1.07 (07/03/2007)</b><p> +<p>This library is a collection of SMD and through hole resistors and capacitors by various manufacturers. Some of these include types from Panasonic, Kemet, BC Components and others. Many of the packages were adapted from <b>rcl.lbr</b> and <b>cap-pan40.lbr</b> and have been renamed and grouped in a more logical form.</p><p>Silkscreen elements are a minimum of 8 mils in width with larger components using 10 mil widths. Most of the SMD components have text sizes of 0 .04" and thru-hole components are 0.05" in size. A text ratio of 14 is used in both cases. Where practical, the elements are aligned on a 12.5 mil or 6.25 mil grid depending on the pad size and spacing.</p> +<p><h4>All capacitors are grouped by the following naming conventions:</h4></p> +<table width="380" border="1" bordercolor="#000000"> + <tr> + <td width="81" bgcolor="#33CCFF"><div align="center"><strong>Prefix</strong></div></td> + <td width="289" bgcolor="#33CCFF"><div align="center"><strong>Description</strong></div></td> + </tr> + <tr> + <td><div align="center">CBP_</div></td> + <td><div align="center">Bipolar Electrolytic Types</div></td> + </tr> + <tr> + <td><div align="center">CCA_</div></td> + <td><div align="center">Chip Cap Array Types</div></td> + </tr> + <tr> + <td><div align="center">CP_</div></td> + <td><div align="center">Polarized Electrolytic/Tantalum Types</div></td> + </tr> + <tr> + <td><div align="center">C_</div></td> + <td><div align="center">Non-Polarized Film / Chip Types</div></td> + </tr> + <tr> + <td><div align="center">FB_</div></td> + <td><div align="center">Simple Ferrite Bead Types</div></td> + </tr> + <tr> + <td><div align="center">L_</div></td> + <td><div align="center">Simple Chip Inductors</div></td> + </tr> + <tr> + <td><div align="center">R_</div></td> + <td><div align="center">Resistor Types</div></td> + </tr> +</table> +<p> +<p><author>THIS LIBRARY IS PROVIDED AS IS AND WITHOUT WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED.<br>Copyright (C) 2007, Bob Starr<br> http://www.bobstarr.net<br> +</author> + + +<b>POLCAP RADIAL</b><p> +3.5 mm lead spacing, 8 mm diameter, grid 0.0125 inch + + + + + + + + + + +>VALUE +>NAME + @@ -4276,116 +5128,55 @@ EAGLE CAD Libraries on element14</a> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -4404,17 +5195,14 @@ EAGLE CAD Libraries on element14</a> - - - + + + - - - - - - - + + + + @@ -4465,46 +5253,23 @@ EAGLE CAD Libraries on element14</a> - - - - - - - + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + @@ -4752,11 +5517,11 @@ EAGLE CAD Libraries on element14</a> - + - + @@ -4872,13 +5637,8 @@ EAGLE CAD Libraries on element14</a> - - - - - - + @@ -4888,6 +5648,779 @@ EAGLE CAD Libraries on element14</a> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -4902,37 +6435,12 @@ EAGLE CAD Libraries on element14</a> - - - - - - - - - - - - - - - - - - - - - - - - - @@ -4942,21 +6450,6 @@ EAGLE CAD Libraries on element14</a> - - - - - - - - - - - - - - - @@ -5090,21 +6583,6 @@ EAGLE CAD Libraries on element14</a> - - - - - - - - - - - - - - - @@ -5148,29 +6626,6 @@ EAGLE CAD Libraries on element14</a> - - - - - - - - - - - - - - - - - - - - - - - @@ -5292,22 +6747,6 @@ EAGLE CAD Libraries on element14</a> - - - - - - - - - - - - - - - - @@ -5356,12 +6795,6 @@ EAGLE CAD Libraries on element14</a> - - - - - - @@ -5372,17 +6805,573 @@ EAGLE CAD Libraries on element14</a> - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - @@ -5391,13 +7380,11 @@ EAGLE CAD Libraries on element14</a> - - + + - - @@ -5408,34 +7395,27 @@ EAGLE CAD Libraries on element14</a> - - - - - - - + + + + + - - - - - - - + + + + + + + - - - - - - - - - + + + + @@ -5579,8 +7559,8 @@ EAGLE CAD Libraries on element14</a> - - + + @@ -5633,12 +7613,11 @@ EAGLE CAD Libraries on element14</a> - - + @@ -5647,198 +7626,93 @@ EAGLE CAD Libraries on element14</a> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + - - - - - - - - - - - - - + + + + + + + + + + + + + - - - - - - - - - + + + + + + + + + - - - - + + + + - - - - - - - + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + @@ -5959,122 +7833,83 @@ EAGLE CAD Libraries on element14</a> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + - - - - + + + + - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + - - - - + + + + - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + - - - - + + + + @@ -6101,540 +7936,240 @@ EAGLE CAD Libraries on element14</a> - - - - - - - - - - - - - + + + + - - - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - - - - - + - - - - - - - - - - + - - - - - - - - + - - - - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - - - - - - - - - - - + - - - - - - - - - - + - - - - - - - + - - - - - - - + - - - - - - + - - - - - - - - - - - - - - - - - - - + - - - - - - - - - - - - - + - - - - - - - + - - - - - - - - - - + - - - - - - - + - - - - - - - - - - - + - - - - - - - + - - - - - - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -6643,8 +8178,6 @@ EAGLE CAD Libraries on element14</a> - - @@ -6653,8 +8186,6 @@ EAGLE CAD Libraries on element14</a> - - @@ -6664,8 +8195,6 @@ EAGLE CAD Libraries on element14</a> - - @@ -6677,12 +8206,10 @@ EAGLE CAD Libraries on element14</a> - - @@ -6690,12 +8217,10 @@ EAGLE CAD Libraries on element14</a> - - @@ -6703,12 +8228,10 @@ EAGLE CAD Libraries on element14</a> - - @@ -6716,10 +8239,8 @@ EAGLE CAD Libraries on element14</a> - - @@ -6727,19 +8248,15 @@ EAGLE CAD Libraries on element14</a> - - - - @@ -6748,167 +8265,107 @@ EAGLE CAD Libraries on element14</a> - - - - - - - - - + + - - - - + - - - - - - - - - - - - - - - - - - - - - - - - + - - - - - - - - - - - - - - - - - - - - - - + - - - - - - @@ -7729,7 +9186,6 @@ EAGLE CAD Libraries on element14</a> - @@ -7739,9 +9195,6 @@ EAGLE CAD Libraries on element14</a> - - - @@ -7749,18 +9202,6 @@ EAGLE CAD Libraries on element14</a> - - - - - - - - - - - - @@ -7768,13 +9209,1162 @@ EAGLE CAD Libraries on element14</a> - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/eagle/alpha/rev02/rev02.sch b/eagle/alpha/rev02/rev02.sch index 3df1a95..488ca58 100644 --- a/eagle/alpha/rev02/rev02.sch +++ b/eagle/alpha/rev02/rev02.sch @@ -6,7 +6,7 @@ - + @@ -18735,529 +18735,6 @@ new: Attribute TP_SIGNAL_NAME<br> - - - -This is the receptable version used on Novena add-on boards, such as the GPBB. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME - - -HRS FX10*-80S/8-SV(71) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - -<b>HRS FX10A-80S/8-SV(71)</b> -<br/> -10+ Gbps 0.5 mm pitch Stacking Connectors -<p> -This is the connector used to connect the General Purpose Breakout Board (GPBB) to the Novena. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - <b>Transistors</b><p> <author>Created by librarian@cadsoft.de</author> @@ -19332,46 +18809,6 @@ This is the connector used to connect the General Purpose Breakout Board (GPBB) <p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. </p> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - 0805 (2012 Metric) @@ -19974,17 +19411,6 @@ Epson Toyocom FCC-255 - - - - - - ->NAME ->VALUE - - - @@ -20045,37 +19471,6 @@ Epson Toyocom FCC-255 - -<b>Solder Jumper - Closed</b> -<p>These solder jumpers are closed by default</p> -<ul> -<li><b>CLOSEDWIRE</b> - 10 mil trace between pads that can be cut and resoldered later</li> -<li><b>CLOSEDPERM</b> - 63 mil trace between pads for a permanent connection (used to 'bridge' two signals, a shameless hack for Eagle). Can double as a test point as well (no cream layer)</li> -</ul> - - - - - - - - - - - - - - - - - - - - - - - - <p><b>Ceramic Capacitors</b></p> <b>0402</b> - 0402 Surface Mount Capacitors @@ -21430,94 +20825,6 @@ Source: Fairchild .. BAT54.pdf - -<b>Maxim Components</b><p> - -<author>Created by librarian@cadsoft.de</author> - - -<b>Small Outline Package</b> SOIC 150 mil - - - - - - - - - - - - - - - - - - - - ->VALUE ->NAME - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - -<b>VOLTAGE CONVERTER</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -21968,421 +21275,6 @@ Matches 4UCONN part # 11026<br> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - -This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. -You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). -This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" -to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. -Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, -if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment -will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - ->Name ->Value -+ -- -S -S - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->Name ->Value -+ -- -Y -B - - - - - - - - - - - - ->Value ->Name - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - @@ -22973,400 +21865,6 @@ will be further integrated into the Sparkfun Library for other footprints. It c - -<b>USB Series A Hole Mounted</b> - - - - - - - - - - - - - - - - - - - - - ->NAME -PCB Edge - - - - -<b>USB Series A Surface Mounted</b> - - - - - - - - - - - - - - - - ->NAME - - -<b>USB Series Mini-B Hole Mounted</b> - - - - - - - - - - - - - - - - - - - - ->NAME - - - - - - -USB Series B Surface Mounted - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME - - - - -<b>USB Series Mini-B Surface Mounted</b> - - - - - - - - - - - - - - - - ->VALUE ->NAME - - - - -<b>USB Series B Hole Mounted</b> - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - -<b>USB Series Mini-B Surface Mounted</b> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - ->Name ->Value - - -<b>USB Series B Hole Mounted</b> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -Micro USB Package - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - ->NAME -PCB Edge - - - - - - - - - - - - - @@ -23383,22 +21881,6 @@ will be further integrated into the Sparkfun Library for other footprints. It c - - - - - - - - - ->VALUE ->NAME - - - - - @@ -23447,16 +21929,6 @@ will be further integrated into the Sparkfun Library for other footprints. It c - - - - -USB - - - - - @@ -23694,229 +22166,6 @@ Standard 3-pin 0.1" header. Use with straight break away headers (SKU : PRT-0011 - -<b>Header 4</b> -Standard 4-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - <b>AVR ISP 6 Pin</b> This is the reduced ISP connector for AVR programming. Common on Arduino. This footprint will take up less PCB space and can be used with a 10-pin to 6-pin adapter such as SKU: BOB-08508 @@ -24146,205 +22395,6 @@ Standard 10-pin 0.1" header. Use with straight break away headers (SKU : PRT-001 - -<b>USB Connectors</b> -<p>USB-B-PTH is fully proven SKU : PRT-00139/CONN-08278 -<p>USB-miniB is fully proven SKU : PRT-00587 -<p>USB-A-PCB is untested. -<p>USB-A-H is throughly reviewed, but untested. Spark Fun Electronics SKU : PRT-00437 -<p>USB-B-SMT is throughly reviewed, but untested. Needs silkscreen touching up. -<p>USB-A-S has not been used/tested -<p>USB-MB-H has not been used/tested -<P>USB-MICROB has been used. CONN-09505 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -28152,204 +26202,6 @@ Thru-hole RA Female Mini-B USB Connector 4UConnector: 18732</p> - - - - - - - ->NAME ->VALUE - - -<B>LED</B><p> -5 mm, round - - - - - - - - - - - ->NAME ->VALUE - - -<B>LED</B><p> -3 mm, round - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - -L -S - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - -<h3>LED 3MM - No Silk</h3> -3 mm, round - - - - - - - - - - - ->NAME ->VALUE - - -<h3>LED5MM-KIT</h3> -5MM Through-hole LED<br> -<br> -<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - Tactile SMD mounted switch @@ -28380,351 +26232,8 @@ Thru-hole RA Female Mini-B USB Connector 4UConnector: 18732</p> - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - @@ -28751,119 +26260,8 @@ Thru-hole RA Female Mini-B USB Connector 4UConnector: 18732</p> - - - - - - - - - - ->NAME ->VALUE - - -<b>LEDs</b> -Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. 5mm - Spark Fun Electronics SKU : COM-00529 (and others) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -28905,2438 +26303,6 @@ Various fiducial points for machine vision alignment. - -Aluminum Electrolytic Capacitors,Surface Mount Type - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -40815,10 +35781,8 @@ SD Series, Vertical mount - - @@ -40837,27 +35801,12 @@ SD Series, Vertical mount - - - - - - - - - - - - - - - @@ -40876,16 +35825,6 @@ SD Series, Vertical mount - - - - - - - - - - @@ -41050,10 +35989,8 @@ SD Series, Vertical mount - - @@ -41964,644 +36901,91 @@ SD Series, Vertical mount CrypTech avalanche noise evaluation board, rev 02 -Novena FPGA connector -Extra +ARM side of FMC bus +Extra +<-- FMC_D[...] signals can be swapped +<-- FMC_A[...] signals can be swapped - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + - + - - + + - - + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Power -VCC 3.3V regulator -DC/DC converter producing -15v for Noise source -Lowpass filter -LC filter -Optionally power whole board -using micro USB connector -Output cap should +VCC 3.3V regulator +Output cap should be X7R with ESR between 5-500 mOhm. - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + - - - - - - - + + + - - - + + + - - - - - - - - - - - - - + + - - - - - + + + + - - + + @@ -42609,249 +36993,92 @@ between 5-500 mOhm. - - + + - - - + + + - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + - - - - - - - - - + -- cgit v1.2.3