From 4afe0c561badd7654dbd5306a8fd935e2eafdefd Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Thu, 21 Jul 2016 10:33:53 +0200 Subject: Altium Designer source files for rev03, as received from Pavel. Source is CrypTech_Project_30052016.rar with SHA256 9d4c4401a560a3dfd69e37b5a76283ca573f91c96ae82eb587724bb610d091a7 --- cad/rev03/rev03.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 cad/rev03/rev03.txt (limited to 'cad/rev03/rev03.txt') diff --git a/cad/rev03/rev03.txt b/cad/rev03/rev03.txt new file mode 100644 index 0000000..97ea118 --- /dev/null +++ b/cad/rev03/rev03.txt @@ -0,0 +1,18 @@ + 1. Removed mounting holes + 2. Changed board size to 99.5 x 120 mm + 3. Removed UART Tx, Rx LEDs and resistors + 4. Moved power jack to the other edge of the board + 5. Pushed power jack slightly inwards to make it flush with the board edge + 6. Changed silkscreen text to "rev.03" and increased font + 7. Added metal "PCB rev.03" text on bottom side of the board + 8. Removed soldermask from "Open Hardware" logo (to make it shine :) + 9. Added USB Vbus to J2 and J3 instead of VCCO_3V3 +10. Panic button moved to the other side of the board +11. LEDs moved to the other side of the board +12. Moved JP6 +13. Moved FPGA JTAG header +14. Moved AVR GPIO header +15. Moved POWER_OK and FPGA_DONE LEDs +16. Combined JP7-JP9 into one header +17. Added silkscreen for battery header JP4 +18. Combined JP7-JP9 into one 3x2-pin header -- cgit v1.2.3