From 391dbd217b65c04824ea81ba5928fb8c36d92f91 Mon Sep 17 00:00:00 2001 From: Fredrik Thulin Date: Mon, 25 May 2015 20:46:03 +0200 Subject: init --- Novena-entropy-board/rev03.brd | 3494 +++++++ Novena-entropy-board/rev03.sch | 17461 ++++++++++++++++++++++++++++++++ Novena-entropy-board/rev03_bottom.pdf | Bin 0 -> 22634 bytes Novena-entropy-board/rev03_brd.pdf | Bin 0 -> 60607 bytes Novena-entropy-board/rev03_sch.pdf | Bin 0 -> 41341 bytes Novena-entropy-board/rev03_top.pdf | Bin 0 -> 37925 bytes 6 files changed, 20955 insertions(+) create mode 100644 Novena-entropy-board/rev03.brd create mode 100644 Novena-entropy-board/rev03.sch create mode 100644 Novena-entropy-board/rev03_bottom.pdf create mode 100644 Novena-entropy-board/rev03_brd.pdf create mode 100644 Novena-entropy-board/rev03_sch.pdf create mode 100644 Novena-entropy-board/rev03_top.pdf (limited to 'Novena-entropy-board') diff --git a/Novena-entropy-board/rev03.brd b/Novena-entropy-board/rev03.brd new file mode 100644 index 0000000..c49e105 --- /dev/null +++ b/Novena-entropy-board/rev03.brd @@ -0,0 +1,3494 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +https://cryptech.is/ +Novena Entropy Source +rev 03 +5V +GND + + +3V3 + +GND +pad + + +NOISE +3V3 +GND +-15V +PWR +NOISY +DIODE + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find discrete LEDs for illumination or indication, but no displays.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + + + + + + + +>NAME +>VALUE + + + + +<b>Resistors, Capacitors, Inductors</b><p> +Based on the previous libraries: +<ul> +<li>r.lbr +<li>cap.lbr +<li>cap-fe.lbr +<li>captant.lbr +<li>polcap.lbr +<li>ipc-smd.lbr +</ul> +All SMD packages are defined according to the IPC specifications and CECC<p> +<author>Created by librarian@cadsoft.de</author><p> +<p> +for Electrolyt Capacitors see also :<p> +www.bccomponents.com <p> +www.panasonic.com<p> +www.kemet.com<p> +<p> +for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p> + +<map name="nav_main"> +<area shape="rect" coords="0,1,140,23" href="../military_specs.asp" title=""> +<area shape="rect" coords="0,24,140,51" href="../about.asp" title=""> +<area shape="rect" coords="1,52,140,77" href="../rfq.asp" title=""> +<area shape="rect" coords="0,78,139,103" href="../products.asp" title=""> +<area shape="rect" coords="1,102,138,128" href="../excess_inventory.asp" title=""> +<area shape="rect" coords="1,129,138,150" href="../edge.asp" title=""> +<area shape="rect" coords="1,151,139,178" href="../industry_links.asp" title=""> +<area shape="rect" coords="0,179,139,201" href="../comments.asp" title=""> +<area shape="rect" coords="1,203,138,231" href="../directory.asp" title=""> +<area shape="default" nohref> +</map> + +<html> + +<title></title> + + <LINK REL="StyleSheet" TYPE="text/css" HREF="style-sheet.css"> + +<body bgcolor="#ffffff" text="#000000" marginwidth="0" marginheight="0" topmargin="0" leftmargin="0"> +<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0 height="55%"> +<tr valign="top"> + +</td> +<! <td width="10">&nbsp;</td> +<td width="90%"> + +<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b> +<P> +<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2> + <TR> + <TD COLSPAN=8> + <FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT> + </TD> + </TR> + <TR> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">BI&nbsp;TECH</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT> + </B> + </TD><TD>&nbsp;</TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 > + 3005P<BR> + 3006P<BR> + 3006W<BR> + 3006Y<BR> + 3009P<BR> + 3009W<BR> + 3009Y<BR> + 3057J<BR> + 3057L<BR> + 3057P<BR> + 3057Y<BR> + 3059J<BR> + 3059L<BR> + 3059P<BR> + 3059Y<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 89P<BR> + 89W<BR> + 89X<BR> + 89PH<BR> + 76P<BR> + 89XH<BR> + 78SLT<BR> + 78L&nbsp;ALT<BR> + 56P&nbsp;ALT<BR> + 78P&nbsp;ALT<BR> + T8S<BR> + 78L<BR> + 56P<BR> + 78P<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + T18/784<BR> + 783<BR> + 781<BR> + -<BR> + -<BR> + -<BR> + 2199<BR> + 1697/1897<BR> + 1680/1880<BR> + 2187<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 8035EKP/CT20/RJ-20P<BR> + -<BR> + RJ-20X<BR> + -<BR> + -<BR> + -<BR> + 1211L<BR> + 8012EKQ&nbsp;ALT<BR> + 8012EKR&nbsp;ALT<BR> + 1211P<BR> + 8012EKJ<BR> + 8012EKL<BR> + 8012EKQ<BR> + 8012EKR<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 2101P<BR> + 2101W<BR> + 2101Y<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 2102L<BR> + 2102S<BR> + 2102Y<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + EVMCOG<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 43P<BR> + 43W<BR> + 43Y<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 40L<BR> + 40P<BR> + 40Y<BR> + 70Y-T602<BR> + 70L<BR> + 70P<BR> + 70Y<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + RT/RTR12<BR> + RT/RTR12<BR> + RT/RTR12<BR> + -<BR> + RJ/RJR12<BR> + RJ/RJR12<BR> + RJ/RJR12<BR></FONT> + </TD> + </TR> + <TR> + <TD COLSPAN=8>&nbsp; + </TD> + </TR> + <TR> + <TD COLSPAN=8> + <FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT> + </TD> + </TR> + <TR> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3250L<BR> + 3250P<BR> + 3250W<BR> + 3250X<BR> + 3252P<BR> + 3252W<BR> + 3252X<BR> + 3260P<BR> + 3260W<BR> + 3260X<BR> + 3262P<BR> + 3262W<BR> + 3262X<BR> + 3266P<BR> + 3266W<BR> + 3266X<BR> + 3290H<BR> + 3290P<BR> + 3290W<BR> + 3292P<BR> + 3292W<BR> + 3292X<BR> + 3296P<BR> + 3296W<BR> + 3296X<BR> + 3296Y<BR> + 3296Z<BR> + 3299P<BR> + 3299W<BR> + 3299X<BR> + 3299Y<BR> + 3299Z<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 66P&nbsp;ALT<BR> + 66W&nbsp;ALT<BR> + 66X&nbsp;ALT<BR> + 66P&nbsp;ALT<BR> + 66W&nbsp;ALT<BR> + 66X&nbsp;ALT<BR> + -<BR> + 64W&nbsp;ALT<BR> + -<BR> + 64P&nbsp;ALT<BR> + 64W&nbsp;ALT<BR> + 64X&nbsp;ALT<BR> + 64P<BR> + 64W<BR> + 64X<BR> + 66X&nbsp;ALT<BR> + 66P&nbsp;ALT<BR> + 66W&nbsp;ALT<BR> + 66P<BR> + 66W<BR> + 66X<BR> + 67P<BR> + 67W<BR> + 67X<BR> + 67Y<BR> + 67Z<BR> + 68P<BR> + 68W<BR> + 68X<BR> + 67Y&nbsp;ALT<BR> + 67Z&nbsp;ALT<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 5050<BR> + 5091<BR> + 5080<BR> + 5087<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + T63YB<BR> + T63XB<BR> + -<BR> + -<BR> + -<BR> + 5887<BR> + 5891<BR> + 5880<BR> + -<BR> + -<BR> + -<BR> + T93Z<BR> + T93YA<BR> + T93XA<BR> + T93YB<BR> + T93XB<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 8026EKP<BR> + 8026EKW<BR> + 8026EKM<BR> + 8026EKP<BR> + 8026EKB<BR> + 8026EKM<BR> + 1309X<BR> + 1309P<BR> + 1309W<BR> + 8024EKP<BR> + 8024EKW<BR> + 8024EKN<BR> + RJ-9P/CT9P<BR> + RJ-9W<BR> + RJ-9X<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 3103P<BR> + 3103Y<BR> + 3103Z<BR> + 3103P<BR> + 3103Y<BR> + 3103Z<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 3105P/3106P<BR> + 3105W/3106W<BR> + 3105X/3106X<BR> + 3105Y/3106Y<BR> + 3105Z/3105Z<BR> + 3102P<BR> + 3102W<BR> + 3102X<BR> + 3102Y<BR> + 3102Z<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + EVMCBG<BR> + EVMCCG<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 55-1-X<BR> + 55-4-X<BR> + 55-3-X<BR> + 55-2-X<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 50-2-X<BR> + 50-4-X<BR> + 50-3-X<BR> + -<BR> + -<BR> + -<BR> + 64P<BR> + 64W<BR> + 64X<BR> + 64Y<BR> + 64Z<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + RT/RTR22<BR> + RT/RTR22<BR> + RT/RTR22<BR> + RT/RTR22<BR> + RJ/RJR22<BR> + RJ/RJR22<BR> + RJ/RJR22<BR> + RT/RTR26<BR> + RT/RTR26<BR> + RT/RTR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RT/RTR24<BR> + RT/RTR24<BR> + RT/RTR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> + <TR> + <TD COLSPAN=8>&nbsp; + </TD> + </TR> + <TR> + <TD COLSPAN=8> + <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT> + </TD> + </TR> + <TR> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3323P<BR> + 3323S<BR> + 3323W<BR> + 3329H<BR> + 3329P<BR> + 3329W<BR> + 3339H<BR> + 3339P<BR> + 3339W<BR> + 3352E<BR> + 3352H<BR> + 3352K<BR> + 3352P<BR> + 3352T<BR> + 3352V<BR> + 3352W<BR> + 3362H<BR> + 3362M<BR> + 3362P<BR> + 3362R<BR> + 3362S<BR> + 3362U<BR> + 3362W<BR> + 3362X<BR> + 3386B<BR> + 3386C<BR> + 3386F<BR> + 3386H<BR> + 3386K<BR> + 3386M<BR> + 3386P<BR> + 3386S<BR> + 3386W<BR> + 3386X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 25P<BR> + 25S<BR> + 25RX<BR> + 82P<BR> + 82M<BR> + 82PA<BR> + -<BR> + -<BR> + -<BR> + 91E<BR> + 91X<BR> + 91T<BR> + 91B<BR> + 91A<BR> + 91V<BR> + 91W<BR> + 25W<BR> + 25V<BR> + 25P<BR> + -<BR> + 25S<BR> + 25U<BR> + 25RX<BR> + 25X<BR> + 72XW<BR> + 72XL<BR> + 72PM<BR> + 72RX<BR> + -<BR> + 72PX<BR> + 72P<BR> + 72RXW<BR> + 72RXL<BR> + 72X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + T7YB<BR> + T7YA<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + TXD<BR> + TYA<BR> + TYP<BR> + -<BR> + TYD<BR> + TX<BR> + -<BR> + 150SX<BR> + 100SX<BR> + 102T<BR> + 101S<BR> + 190T<BR> + 150TX<BR> + 101<BR> + -<BR> + -<BR> + 101SX<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + ET6P<BR> + ET6S<BR> + ET6X<BR> + RJ-6W/8014EMW<BR> + RJ-6P/8014EMP<BR> + RJ-6X/8014EMX<BR> + TM7W<BR> + TM7P<BR> + TM7X<BR> + -<BR> + 8017SMS<BR> + -<BR> + 8017SMB<BR> + 8017SMA<BR> + -<BR> + -<BR> + CT-6W<BR> + CT-6H<BR> + CT-6P<BR> + CT-6R<BR> + -<BR> + CT-6V<BR> + CT-6X<BR> + -<BR> + -<BR> + 8038EKV<BR> + -<BR> + 8038EKX<BR> + -<BR> + -<BR> + 8038EKP<BR> + 8038EKZ<BR> + 8038EKW<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + 3321H<BR> + 3321P<BR> + 3321N<BR> + 1102H<BR> + 1102P<BR> + 1102T<BR> + RVA0911V304A<BR> + -<BR> + RVA0911H413A<BR> + RVG0707V100A<BR> + RVA0607V(H)306A<BR> + RVA1214H213A<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 3104B<BR> + 3104C<BR> + 3104F<BR> + 3104H<BR> + -<BR> + 3104M<BR> + 3104P<BR> + 3104S<BR> + 3104W<BR> + 3104X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + EVMQ0G<BR> + EVMQIG<BR> + EVMQ3G<BR> + EVMS0G<BR> + EVMQ0G<BR> + EVMG0G<BR> + -<BR> + -<BR> + -<BR> + EVMK4GA00B<BR> + EVM30GA00B<BR> + EVMK0GA00B<BR> + EVM38GA00B<BR> + EVMB6<BR> + EVLQ0<BR> + -<BR> + EVMMSG<BR> + EVMMBG<BR> + EVMMAG<BR> + -<BR> + -<BR> + EVMMCS<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + EVMM1<BR> + -<BR> + -<BR> + EVMM0<BR> + -<BR> + -<BR> + EVMM3<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + 62-3-1<BR> + 62-1-2<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 67R<BR> + -<BR> + 67P<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 67X<BR> + 63V<BR> + 63S<BR> + 63M<BR> + -<BR> + -<BR> + 63H<BR> + 63P<BR> + -<BR> + -<BR> + 63X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + RJ/RJR50<BR> + RJ/RJR50<BR> + RJ/RJR50<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> +</TABLE> +<P>&nbsp;<P> +<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3> + <TR> + <TD COLSPAN=7> + <FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT> + <P> + <FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT> + </TD> + </TR> + <TR> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3224G<BR> + 3224J<BR> + 3224W<BR> + 3269P<BR> + 3269W<BR> + 3269X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 44G<BR> + 44J<BR> + 44W<BR> + 84P<BR> + 84W<BR> + 84X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + ST63Z<BR> + ST63Y<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + ST5P<BR> + ST5W<BR> + ST5X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> + <TR> + <TD COLSPAN=7>&nbsp; + </TD> + </TR> + <TR> + <TD COLSPAN=7> + <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT> + </TD> + </TR> + <TR> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3314G<BR> + 3314J<BR> + 3364A/B<BR> + 3364C/D<BR> + 3364W/X<BR> + 3313G<BR> + 3313J<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 23B<BR> + 23A<BR> + 21X<BR> + 21W<BR> + -<BR> + 22B<BR> + 22A<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + ST5YL/ST53YL<BR> + ST5YJ/5T53YJ<BR> + ST-23A<BR> + ST-22B<BR> + ST-22<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + ST-4B<BR> + ST-4A<BR> + -<BR> + -<BR> + -<BR> + ST-3B<BR> + ST-3A<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + EVM-6YS<BR> + EVM-1E<BR> + EVM-1G<BR> + EVM-1D<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + G4B<BR> + G4A<BR> + TR04-3S1<BR> + TRG04-2S1<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + DVR-43A<BR> + CVR-42C<BR> + CVR-42A/C<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> +</TABLE> +<P> +<FONT SIZE=4 FACE=ARIAL><B>ALT =&nbsp;ALTERNATE</B></FONT> +<P> + +&nbsp; +<P> +</td> +</tr> +</table> +</BODY></HTML> + + +<b>RESISTOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Test Pins/Pads</b><p> +Cream on SMD OFF.<br> +new: Attribute TP_SIGNAL_NAME<br> +<author>Created by librarian@cadsoft.de</author> + + +<b>TEST PAD</b> + + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + + + + +This is the receptable version used on Novena add-on boards, such as the GPBB. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME + + + + +<b>NPN Transistors</b><p> +<author>Created by librarian@cadsoft.de</author> + + +TO-236 ITT Intermetall + + + + + + + +>NAME +>VALUE + + + + + + + +<b>Transistors</b><p> +<author>Created by librarian@cadsoft.de</author> + + +<b>SOT-23</b> + + + + + + + +>NAME +>VALUE + + + + + + + +<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> + +<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> + +<h3>Obligatory Warning</h3> +<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> + +<h3>License</h3> +<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> +<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +</p> + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>0805</b> + + + + + + + + +>NAME +>VALUE + + + + + +0805 (2012 Metric) + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + +Shielding cabinet SMD- Frame WE-SHC<br> +20.0 x 20.0 x 3.0 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Diodes</b><p> +Based on the following sources: +<ul> +<li>Motorola : www.onsemi.com +<li>Fairchild : www.fairchildsemi.com +<li>Philips : www.semiconductors.com +<li>Vishay : www.vishay.de +</ul> +<author>Created by librarian@cadsoft.de</author> + + +<B>DIODE</B> + + + + + + + + + + + +>NAME +>VALUE + + + + + + + +<b>Maxim Components</b><p> + +<author>Created by librarian@cadsoft.de</author> + + +<b>Small Outline Package</b> SOIC 150 mil + + + + + + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + +<b> Developed By element14 </b><p> + +For feedback and Technical support please contact reach from below: +<br> Tech Support e-mail : <a href="mailto:CAD_Tech@element14.com">CAD_Tech@element14.com</a> +<br>Community website: <a href=http://www.element14.com/community/community/knode/cad_tools/cadsoft_eagle/eagle_cad_libraries> +EAGLE CAD Libraries on element14</a> + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +* + + + +* +>NAME +>VALUE + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +<b> Developed By element14 </b><p> + +For feedback and Technical support please contact reach from below: +<br> Tech Support e-mail : <a href="mailto:CAD_Tech@element14.com">CAD_Tech@element14.com</a> +<br>Community website: <a href=http://www.element14.com/community/community/knode/cad_tools/cadsoft_eagle/eagle_cad_libraries> +EAGLE CAD Libraries on element14</a> + + + + + + + + + + + + + + +* + + + + + + + + + + + + + + + + + +* +>NAME +>VALUE + + + + + + + + + + + + + + + + + +* + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +* +>NAME +>VALUE + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + +<b>EAGLE Design Rules</b> +<p> +Die Standard-Design-Rules sind so gewählt, dass sie für +die meisten Anwendungen passen. Sollte ihre Platine +besondere Anforderungen haben, treffen Sie die erforderlichen +Einstellungen hier und speichern die Design Rules unter +einem neuen Namen ab. +<b>EAGLE Design Rules</b> +<p> +Cogra + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + + diff --git a/Novena-entropy-board/rev03.sch b/Novena-entropy-board/rev03.sch new file mode 100644 index 0000000..63f8a6f --- /dev/null +++ b/Novena-entropy-board/rev03.sch @@ -0,0 +1,17461 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +CrypTech avalanche noise evaluation board +Revision 02 +(c) NORDUnet A/S + + +<b>Supply Symbols</b><p> +GND, VCC, 0V, +5V, -5V, etc.<p> +Please keep in mind, that these devices are necessary for the +automatic wiring of the supply signals.<p> +The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> +In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> +<author>Created by librarian@cadsoft.de</author> + + + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find discrete LEDs for illumination or indication, but no displays.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + +<B>LED</B><p> +5 mm, round + + + + + + + + + + + +>NAME +>VALUE + + +<B>LED</B><p> +3 mm, round + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + + + +L +S + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + +<h3>LED 3MM - No Silk</h3> +3 mm, round + + + + + + + + + + + +>NAME +>VALUE + + +<h3>LED5MM-KIT</h3> +5MM Through-hole LED<br> +<br> +<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +<b>LEDs</b> +Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. 5mm - Spark Fun Electronics SKU : COM-00529 (and others) + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Resistors, Capacitors, Inductors</b><p> +Based on the previous libraries: +<ul> +<li>r.lbr +<li>cap.lbr +<li>cap-fe.lbr +<li>captant.lbr +<li>polcap.lbr +<li>ipc-smd.lbr +</ul> +All SMD packages are defined according to the IPC specifications and CECC<p> +<author>Created by librarian@cadsoft.de</author><p> +<p> +for Electrolyt Capacitors see also :<p> +www.bccomponents.com <p> +www.panasonic.com<p> +www.kemet.com<p> +<p> +for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p> + +<map name="nav_main"> +<area shape="rect" coords="0,1,140,23" href="../military_specs.asp" title=""> +<area shape="rect" coords="0,24,140,51" href="../about.asp" title=""> +<area shape="rect" coords="1,52,140,77" href="../rfq.asp" title=""> +<area shape="rect" coords="0,78,139,103" href="../products.asp" title=""> +<area shape="rect" coords="1,102,138,128" href="../excess_inventory.asp" title=""> +<area shape="rect" coords="1,129,138,150" href="../edge.asp" title=""> +<area shape="rect" coords="1,151,139,178" href="../industry_links.asp" title=""> +<area shape="rect" coords="0,179,139,201" href="../comments.asp" title=""> +<area shape="rect" coords="1,203,138,231" href="../directory.asp" title=""> +<area shape="default" nohref> +</map> + +<html> + +<title></title> + + <LINK REL="StyleSheet" TYPE="text/css" HREF="style-sheet.css"> + +<body bgcolor="#ffffff" text="#000000" marginwidth="0" marginheight="0" topmargin="0" leftmargin="0"> +<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0 height="55%"> +<tr valign="top"> + +</td> +<! <td width="10">&nbsp;</td> +<td width="90%"> + +<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b> +<P> +<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2> + <TR> + <TD COLSPAN=8> + <FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT> + </TD> + </TR> + <TR> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">BI&nbsp;TECH</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT> + </B> + </TD> + <TD ALIGN=CENTER> + <B> + <FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT> + </B> + </TD><TD>&nbsp;</TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 > + 3005P<BR> + 3006P<BR> + 3006W<BR> + 3006Y<BR> + 3009P<BR> + 3009W<BR> + 3009Y<BR> + 3057J<BR> + 3057L<BR> + 3057P<BR> + 3057Y<BR> + 3059J<BR> + 3059L<BR> + 3059P<BR> + 3059Y<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 89P<BR> + 89W<BR> + 89X<BR> + 89PH<BR> + 76P<BR> + 89XH<BR> + 78SLT<BR> + 78L&nbsp;ALT<BR> + 56P&nbsp;ALT<BR> + 78P&nbsp;ALT<BR> + T8S<BR> + 78L<BR> + 56P<BR> + 78P<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + T18/784<BR> + 783<BR> + 781<BR> + -<BR> + -<BR> + -<BR> + 2199<BR> + 1697/1897<BR> + 1680/1880<BR> + 2187<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 8035EKP/CT20/RJ-20P<BR> + -<BR> + RJ-20X<BR> + -<BR> + -<BR> + -<BR> + 1211L<BR> + 8012EKQ&nbsp;ALT<BR> + 8012EKR&nbsp;ALT<BR> + 1211P<BR> + 8012EKJ<BR> + 8012EKL<BR> + 8012EKQ<BR> + 8012EKR<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 2101P<BR> + 2101W<BR> + 2101Y<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 2102L<BR> + 2102S<BR> + 2102Y<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + EVMCOG<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 43P<BR> + 43W<BR> + 43Y<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 40L<BR> + 40P<BR> + 40Y<BR> + 70Y-T602<BR> + 70L<BR> + 70P<BR> + 70Y<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + RT/RTR12<BR> + RT/RTR12<BR> + RT/RTR12<BR> + -<BR> + RJ/RJR12<BR> + RJ/RJR12<BR> + RJ/RJR12<BR></FONT> + </TD> + </TR> + <TR> + <TD COLSPAN=8>&nbsp; + </TD> + </TR> + <TR> + <TD COLSPAN=8> + <FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT> + </TD> + </TR> + <TR> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3250L<BR> + 3250P<BR> + 3250W<BR> + 3250X<BR> + 3252P<BR> + 3252W<BR> + 3252X<BR> + 3260P<BR> + 3260W<BR> + 3260X<BR> + 3262P<BR> + 3262W<BR> + 3262X<BR> + 3266P<BR> + 3266W<BR> + 3266X<BR> + 3290H<BR> + 3290P<BR> + 3290W<BR> + 3292P<BR> + 3292W<BR> + 3292X<BR> + 3296P<BR> + 3296W<BR> + 3296X<BR> + 3296Y<BR> + 3296Z<BR> + 3299P<BR> + 3299W<BR> + 3299X<BR> + 3299Y<BR> + 3299Z<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + 66P&nbsp;ALT<BR> + 66W&nbsp;ALT<BR> + 66X&nbsp;ALT<BR> + 66P&nbsp;ALT<BR> + 66W&nbsp;ALT<BR> + 66X&nbsp;ALT<BR> + -<BR> + 64W&nbsp;ALT<BR> + -<BR> + 64P&nbsp;ALT<BR> + 64W&nbsp;ALT<BR> + 64X&nbsp;ALT<BR> + 64P<BR> + 64W<BR> + 64X<BR> + 66X&nbsp;ALT<BR> + 66P&nbsp;ALT<BR> + 66W&nbsp;ALT<BR> + 66P<BR> + 66W<BR> + 66X<BR> + 67P<BR> + 67W<BR> + 67X<BR> + 67Y<BR> + 67Z<BR> + 68P<BR> + 68W<BR> + 68X<BR> + 67Y&nbsp;ALT<BR> + 67Z&nbsp;ALT<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 5050<BR> + 5091<BR> + 5080<BR> + 5087<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + T63YB<BR> + T63XB<BR> + -<BR> + -<BR> + -<BR> + 5887<BR> + 5891<BR> + 5880<BR> + -<BR> + -<BR> + -<BR> + T93Z<BR> + T93YA<BR> + T93XA<BR> + T93YB<BR> + T93XB<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 8026EKP<BR> + 8026EKW<BR> + 8026EKM<BR> + 8026EKP<BR> + 8026EKB<BR> + 8026EKM<BR> + 1309X<BR> + 1309P<BR> + 1309W<BR> + 8024EKP<BR> + 8024EKW<BR> + 8024EKN<BR> + RJ-9P/CT9P<BR> + RJ-9W<BR> + RJ-9X<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 3103P<BR> + 3103Y<BR> + 3103Z<BR> + 3103P<BR> + 3103Y<BR> + 3103Z<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 3105P/3106P<BR> + 3105W/3106W<BR> + 3105X/3106X<BR> + 3105Y/3106Y<BR> + 3105Z/3105Z<BR> + 3102P<BR> + 3102W<BR> + 3102X<BR> + 3102Y<BR> + 3102Z<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + EVMCBG<BR> + EVMCCG<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 55-1-X<BR> + 55-4-X<BR> + 55-3-X<BR> + 55-2-X<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 50-2-X<BR> + 50-4-X<BR> + 50-3-X<BR> + -<BR> + -<BR> + -<BR> + 64P<BR> + 64W<BR> + 64X<BR> + 64Y<BR> + 64Z<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + RT/RTR22<BR> + RT/RTR22<BR> + RT/RTR22<BR> + RT/RTR22<BR> + RJ/RJR22<BR> + RJ/RJR22<BR> + RJ/RJR22<BR> + RT/RTR26<BR> + RT/RTR26<BR> + RT/RTR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RJ/RJR26<BR> + RT/RTR24<BR> + RT/RTR24<BR> + RT/RTR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + RJ/RJR24<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> + <TR> + <TD COLSPAN=8>&nbsp; + </TD> + </TR> + <TR> + <TD COLSPAN=8> + <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT> + </TD> + </TR> + <TR> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT> + </TD> + <TD ALIGN=CENTER> + <FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3323P<BR> + 3323S<BR> + 3323W<BR> + 3329H<BR> + 3329P<BR> + 3329W<BR> + 3339H<BR> + 3339P<BR> + 3339W<BR> + 3352E<BR> + 3352H<BR> + 3352K<BR> + 3352P<BR> + 3352T<BR> + 3352V<BR> + 3352W<BR> + 3362H<BR> + 3362M<BR> + 3362P<BR> + 3362R<BR> + 3362S<BR> + 3362U<BR> + 3362W<BR> + 3362X<BR> + 3386B<BR> + 3386C<BR> + 3386F<BR> + 3386H<BR> + 3386K<BR> + 3386M<BR> + 3386P<BR> + 3386S<BR> + 3386W<BR> + 3386X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 25P<BR> + 25S<BR> + 25RX<BR> + 82P<BR> + 82M<BR> + 82PA<BR> + -<BR> + -<BR> + -<BR> + 91E<BR> + 91X<BR> + 91T<BR> + 91B<BR> + 91A<BR> + 91V<BR> + 91W<BR> + 25W<BR> + 25V<BR> + 25P<BR> + -<BR> + 25S<BR> + 25U<BR> + 25RX<BR> + 25X<BR> + 72XW<BR> + 72XL<BR> + 72PM<BR> + 72RX<BR> + -<BR> + 72PX<BR> + 72P<BR> + 72RXW<BR> + 72RXL<BR> + 72X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + T7YB<BR> + T7YA<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + TXD<BR> + TYA<BR> + TYP<BR> + -<BR> + TYD<BR> + TX<BR> + -<BR> + 150SX<BR> + 100SX<BR> + 102T<BR> + 101S<BR> + 190T<BR> + 150TX<BR> + 101<BR> + -<BR> + -<BR> + 101SX<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + ET6P<BR> + ET6S<BR> + ET6X<BR> + RJ-6W/8014EMW<BR> + RJ-6P/8014EMP<BR> + RJ-6X/8014EMX<BR> + TM7W<BR> + TM7P<BR> + TM7X<BR> + -<BR> + 8017SMS<BR> + -<BR> + 8017SMB<BR> + 8017SMA<BR> + -<BR> + -<BR> + CT-6W<BR> + CT-6H<BR> + CT-6P<BR> + CT-6R<BR> + -<BR> + CT-6V<BR> + CT-6X<BR> + -<BR> + -<BR> + 8038EKV<BR> + -<BR> + 8038EKX<BR> + -<BR> + -<BR> + 8038EKP<BR> + 8038EKZ<BR> + 8038EKW<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + 3321H<BR> + 3321P<BR> + 3321N<BR> + 1102H<BR> + 1102P<BR> + 1102T<BR> + RVA0911V304A<BR> + -<BR> + RVA0911H413A<BR> + RVG0707V100A<BR> + RVA0607V(H)306A<BR> + RVA1214H213A<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 3104B<BR> + 3104C<BR> + 3104F<BR> + 3104H<BR> + -<BR> + 3104M<BR> + 3104P<BR> + 3104S<BR> + 3104W<BR> + 3104X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + EVMQ0G<BR> + EVMQIG<BR> + EVMQ3G<BR> + EVMS0G<BR> + EVMQ0G<BR> + EVMG0G<BR> + -<BR> + -<BR> + -<BR> + EVMK4GA00B<BR> + EVM30GA00B<BR> + EVMK0GA00B<BR> + EVM38GA00B<BR> + EVMB6<BR> + EVLQ0<BR> + -<BR> + EVMMSG<BR> + EVMMBG<BR> + EVMMAG<BR> + -<BR> + -<BR> + EVMMCS<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + EVMM1<BR> + -<BR> + -<BR> + EVMM0<BR> + -<BR> + -<BR> + EVMM3<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + 62-3-1<BR> + 62-1-2<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 67R<BR> + -<BR> + 67P<BR> + -<BR> + -<BR> + -<BR> + -<BR> + 67X<BR> + 63V<BR> + 63S<BR> + 63M<BR> + -<BR> + -<BR> + 63H<BR> + 63P<BR> + -<BR> + -<BR> + 63X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + RJ/RJR50<BR> + RJ/RJR50<BR> + RJ/RJR50<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> +</TABLE> +<P>&nbsp;<P> +<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3> + <TR> + <TD COLSPAN=7> + <FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT> + <P> + <FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT> + </TD> + </TR> + <TR> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3224G<BR> + 3224J<BR> + 3224W<BR> + 3269P<BR> + 3269W<BR> + 3269X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 44G<BR> + 44J<BR> + 44W<BR> + 84P<BR> + 84W<BR> + 84X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + ST63Z<BR> + ST63Y<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + ST5P<BR> + ST5W<BR> + ST5X<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> + <TR> + <TD COLSPAN=7>&nbsp; + </TD> + </TR> + <TR> + <TD COLSPAN=7> + <FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT> + </TD> + </TR> + <TR> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>BI&nbsp;TECH</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT> + </TD> + <TD> + <FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT> + </TD> + </TR> + <TR> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 3314G<BR> + 3314J<BR> + 3364A/B<BR> + 3364C/D<BR> + 3364W/X<BR> + 3313G<BR> + 3313J<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + 23B<BR> + 23A<BR> + 21X<BR> + 21W<BR> + -<BR> + 22B<BR> + 22A<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + ST5YL/ST53YL<BR> + ST5YJ/5T53YJ<BR> + ST-23A<BR> + ST-22B<BR> + ST-22<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + ST-4B<BR> + ST-4A<BR> + -<BR> + -<BR> + -<BR> + ST-3B<BR> + ST-3A<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + EVM-6YS<BR> + EVM-1E<BR> + EVM-1G<BR> + EVM-1D<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + G4B<BR> + G4A<BR> + TR04-3S1<BR> + TRG04-2S1<BR> + -<BR> + -<BR> + -<BR></FONT> + </TD> + <TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3> + -<BR> + -<BR> + DVR-43A<BR> + CVR-42C<BR> + CVR-42A/C<BR> + -<BR> + -<BR></FONT> + </TD> + </TR> +</TABLE> +<P> +<FONT SIZE=4 FACE=ARIAL><B>ALT =&nbsp;ALTERNATE</B></FONT> +<P> + +&nbsp; +<P> +</td> +</tr> +</table> +</BODY></HTML> + + +<b>RESISTOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip, wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip, wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip, wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +chip, wave soldering + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip, wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip, wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip, wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip, wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip, wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +chip, wave soldering + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.10 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.25 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.12 W + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.10 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.25 W + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.25 W + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.12 W + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +MELF 0.25 W + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +type 0204, grid 5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0204, grid 7.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0204, grid 2.5 mm + + + + + + +>NAME +>VALUE + + +<b>RESISTOR</b><p> +type 0207, grid 10 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0207, grid 12 mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>RESISTOR</b><p> +type 0207, grid 15mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>RESISTOR</b><p> +type 0207, grid 2.5 mm + + + + + + + +>NAME +>VALUE + + +<b>RESISTOR</b><p> +type 0207, grid 5 mm + + + + + + + +>NAME +>VALUE + + +<b>RESISTOR</b><p> +type 0207, grid 7.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0309, grid 10mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0309, grid 12.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0309, grid 2.5 mm + + + + + + +>NAME +>VALUE + + + + + +<b>RESISTOR</b><p> +type 0411, grid 12.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0411, grid 15 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0411, grid 3.81 mm + + + + + + +>NAME +>VALUE + + + +<b>RESISTOR</b><p> +type 0414, grid 15 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0414, grid 5 mm + + + + + + +>NAME +>VALUE + + + +<b>RESISTOR</b><p> +type 0617, grid 17.5 mm + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0617, grid 22.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0617, grid 5 mm + + + + + + +>NAME +>VALUE + + + +<b>RESISTOR</b><p> +type 0922, grid 22.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>RESISTOR</b><p> +type 0613, grid 5 mm + + + + + + +>NAME +>VALUE + + + +<b>RESISTOR</b><p> +type 0613, grid 15 mm + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type 0817, grid 22.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +0817 + + + + +<b>RESISTOR</b><p> +type 0817, grid 6.35 mm + + + + + + +>NAME +>VALUE +0817 + + + +<b>RESISTOR</b><p> +type V234, grid 12.5 mm + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type V235, grid 17.78 mm + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR</b><p> +type V526-0, grid 2.5 mm + + + + + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC2211</b> Reflow Soldering<p> +source Beyschlag + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC2211</b> Wave Soldering<p> +source Beyschlag + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC3715</b> Reflow Soldering<p> +source Beyschlag + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC3715</b> Wave Soldering<p> +source Beyschlag + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC6123</b> Reflow Soldering<p> +source Beyschlag + + + + + + +>NAME +>VALUE + + +<b>CECC Size RC6123</b> Wave Soldering<p> +source Beyschlag + + + + + + +>NAME +>VALUE + + +<b>RESISTOR</b><p> +type 0922, grid 7.5 mm + + + + + + +>NAME +>VALUE +0922 + + + +<b>RESISTOR</b><p> +type RDH, grid 15 mm + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +RDH + + + + +<b>Mini MELF 0102 Axial</b> + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + + +<B>RESISTOR</B>, European symbol + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 2.4 x 4.4 mm + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 2.5 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 3 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 4 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 5 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 6 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 2.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 3.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 4.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 5.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 2.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 4.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 3 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 5.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 7.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +Horizontal, grid 5 mm, outline 7.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 3.2 x 10.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 4.2 x 10.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 5.2 x 10.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm, outline 4.3 x 13.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm, outline 5.4 x 13.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm, outline 6.4 x 13.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 5.4 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 6.4 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 7.2 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 8.4 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 9.1 x 18.2 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 6.2 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 7.4 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 8.7 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 10.8 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 11.3 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 9.3 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 11.3 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 13.4 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 20.5 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 32.5 mm, outline 13.7 x 37.4 mm + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 32.5 mm, outline 16.2 x 37.4 mm + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 32.5 mm, outline 18.2 x 37.4 mm + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 37.5 mm, outline 19.2 x 41.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 37.5 mm, outline 20.3 x 41.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 3.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 37.5 mm, outline 15.5 x 41.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 6.3 x 10.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 15.4 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 17.3 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf + + +>NAME +>VALUE + + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +grid 2.5 mm + 5 mm, outline 2.4 x 7 mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 2.4 x 4.4 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p> +Metric Code Size 1005 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p> +Metric Code Size 1608 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p> +Metric Code Size 2012 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p> +Metric Code Size 3216 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p> +Metric Code Size 3225 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p> +Metric Code Size 4532 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p> +Metric Code Size 4564 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664 + + + + +>NAME +>VALUE + + + + +<b> </b><p> +Source: http://www.vishay.com/docs/10129/hpc0201a.pdf + + +>NAME +>VALUE + + + +<b>CAPACITOR</b><p> +Source: AVX .. aphvc.pdf + + + + +>NAME +>VALUE + + + + +<b>CAPACITOR</b><p> +Source: AVX .. aphvc.pdf + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + + + + + +<B>CAPACITOR</B>, European symbol + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Frames for Sheet and Layout</b> + + + + + + + + + + + + + + + + + + + + + + + +>DRAWING_NAME +>LAST_DATE_TIME +>SHEET +Sheet: + + + + + +<b>FRAME</b><p> +DIN A3, landscape with location and doc. field + + + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Open Source Hardware Logo</b> This logo indicates the piece of hardware it is found on incorporates a OSHW license and/or adheres to the definition of open source hardware found here: http://freedomdefined.org/OSHW + + + + + + + + + + + + + + + + + + + + + + + + +<b>Test Pins/Pads</b><p> +Cream on SMD OFF.<br> +new: Attribute TP_SIGNAL_NAME<br> +<author>Created by librarian@cadsoft.de</author> + + +<b>TEST PAD</b> + + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + + + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + + + + + + +>NAME +>TP_SIGNAL_NAME + + + + + +<b>Test pad</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +This is the receptable version used on Novena add-on boards, such as the GPBB. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME + + +HRS FX10*-80S/8-SV(71) + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>HRS FX10A-80S/8-SV(71)</b> +<br/> +10+ Gbps 0.5 mm pitch Stacking Connectors +<p> +This is the connector used to connect the General Purpose Breakout Board (GPBB) to the Novena. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Transistors</b><p> +<author>Created by librarian@cadsoft.de</author> + + +<b>SOT-23</b> + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +<b>NPN TRANSISTOR</b> + + + + + + + + + + + + + + + + + + + +<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> + +<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> + +<h3>Obligatory Warning</h3> +<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> + +<h3>License</h3> +<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> +<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +</p> + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +0805 (2012 Metric) + + + + + + + + + + + + +>NAME +>VALUE + + + + + +1206 (3216 Metric) + + + + + + + + + + + + +>NAME +>VALUE + + + + + +0603 (1608 Metric) + + + + + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + + + + + +>NAME +>VALUE + + + + + +0603-Mini +<p>Mini footprint for dense boards</p> + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b> 0402</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>0402 MicroPitch<p> + + + + + +>NAME +>VALUE + + + + + +<b>0603</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>0603 MicroPitch</b> + + + + + +>NAME +>VALUE + + + + + +<b>0805</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>0805 MicroPitch</b> + + + + + +>NAME +>VALUE + + + + + +Inductor - 1007 (2518 Metric) +<p>L: 2.5mm x W: 1.8mm x H: 1.8mm</p> + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Source: </b>http://www.tdk.co.jp/tefe02/e531_vlc6045.pdf + + + + + + + + + + + +>NAME +>VALUE + + +<b>Source: </b> http://www.tdk.co.jp/tefe02/e531_slf6045.pdf + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Source: http://www.tdk.co.jp/tefe02/e531_vlc5045.pdf</b> + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + + +>NAME +>VALUE + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +<b>Solder Jumper - Closed</b> +<p>These solder jumpers are closed by default</p> +<ul> +<li><b>CLOSEDWIRE</b> - 10 mil trace between pads that can be cut and resoldered later</li> +<li><b>CLOSEDPERM</b> - 63 mil trace between pads for a permanent connection (used to 'bridge' two signals, a shameless hack for Eagle). Can double as a test point as well (no cream layer)</li> +</ul> + + + + + + + + + + + + + + + + + + + + + + + + + +<p><b>Ceramic Capacitors</b></p> +<b>0402</b> - 0402 Surface Mount Capacitors +<ul> +<li>16pF 50V 5% [Digikey: 445-4899-2-ND]</li> +<li>18pF 50V 5% [Digikey: 490-1281-2-ND]</li> +<li>22pF 50V 5% [Digikey: 490-1283-2-ND]</li> +<li>68pF 50V 5% [Digikey: 490-1289-2-ND]</li> +<li>0.1uF 10V 10% [Digikey: 490-1318-2-ND]</li> +<li>1.0uF 6.3V 10% [Digikey: 490-1320-2-ND]</li> +</ul> +<b>0603</b> - 0603 Surface Mount Capacitors +<ul> +<li>16 pF 50V 5% [Digikey: 445-5051-2-ND]</li> +<li>22 pF 50V [Digikey: PCC220ACVTR-ND]</li> +<li>33 pF 50V 5% [Digikey: 490-1415-1-ND]</li> +<li>56pF 50V 5% [Digikey: 490-1421-1-ND]</li> +<li>220pF 50V 5% [Digikey: 445-1285-1-ND]</li> +<li>680 pF 50V </li> +<li>2200 pF 50V 5% C0G [Digikey: 445-1297-1-ND]</li> +<li>5600 pF 100V 5% X7R [Digikey: 478-3711-1-ND]</li> +<li>0.1 µF 25V 10% [Digikey: PCC2277TR-ND]</li> +<li>0.22 µF 16V 10% X7R [Digikey: 445-1318-1-ND]</li> +<li>1.0 µF 25V 10% [Digikey: 445-5146-2-ND]</li> +</ul> +<b>0603</b> - RF Specific +<ul> +<li>3pF 250V +/-0.1pF RF [Digikey: 712-1347-1-ND]</li> +<li>18 pF 250V 5% [Digikey: 478-3505-1-ND or 712-1322-1-ND]</li> +<li>56 pF 250V 5% C0G RF [Digikey: 490-4867-1-ND]</li> +<li>68 pF 250V RF [Digikey: 490-4868-1-ND]</li> +</ul> +<b>0805</b> - 0805 Surface Mount Capacitors +<ul> +<li>220 pF 250V 2% <strong>RF</strong> Ceramic Capacitor [Digikey: 712-1398-1-ND]</li> +<li>1000 pF 50V 2% NP0 Ceramic Capacitor [Digikey: 478-3760-1-ND]</li> +<li>0.1 µF 25V 10% Ceramic Capacitor [Digikey: PCC1828TR-ND]</li> +<li>1.0 µF 16V 10% Ceramic Capacitor[Digikey: 490-1691-2-ND]</li> +<li>10.0 µF 10V 10% Ceramic Capacitor[Digikey: 709-1228-1-ND]</li> +<li>10.0 uF 16V 10% Ceramic Capacitor [Digikey: 478-5165-2-ND]</li> +<li>47 uF 6.3V 20% Ceramic Capacitor [Digikey: 587-1779-1-ND or 399-5506-1-ND]</li> +</ul> +</ul><b>1206</b> - 1206 Surface Mount Capacitors +<ul> +<li>47uF 10V 20% Ceramic Capacitor [Digikey: 490-5528-1-ND or 399-5508-1-ND or 445-6010-1-ND]</li> +<li>100uF 6.3V -20%, +80% Y5V Ceramic Capacitor (Digikey: 490-4512-1-ND, Mouser: 81-GRM31CF50J107ZE1L)</li> +</ul> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Inductors</b> +<p>0603:</p> +<ul> +<li>10nH Ceramic Inductor - microwire antenna/RF (Digikey: 712-1434-2-ND)</li> +</ul> +<p>0805:</p> +<ul> +<li>560nH Ceramic Inductor - RF (Digikey: 553-1047-1-ND)</li> +<li>270nH Ceramic Inductor - Q = 40@250MHz, +-5%, 1 Ohm DC Resistance (Digikey: 535-10506-2-ND)</li> +</ul> +<p>1007 (2518 Metric) SMT:</p> +<ul> +<li>10µH 10% 250mOhm 820mA 1007 Inductor (Digikey: 587-2189-1-ND)</li> +<li>22µH 10% 500mOhm 580mA 1007 Inductor (Digikey: 587-2190-1-ND)</li> +<li>47µH 10% 950mOhm 420mA 1007 Inductor (Digikey: 587-2191-1-ND)</li> +<li>47µH 5% 100mOhm 1A 1008 Inductor (Digikey: 732-1816-1-ND)</li> +</ul> +<p>5.0x5.0mm (Taiyo Yuden NR5040 Series)</p> +<ul> +<li>6.8µH 20% 2.3A 64mOhm Inductor (Digikey: 587-2374-2-ND)</li> +</ul> +<p>5.0x5.0mm (TDK VLC5045 Series)</p> +<ul> +<li>4.7µH 20% 3.3A 34mOhm Inductor (Digikey: 445-6526-1-ND)</li> +<li>6.8µH 20% 2.7A 46mOhm Inductor (Digikey: 445-6527-1-ND)</li> +</ul> +<p>6.0x6.0mm (TDK VLC6045 Series)</p> +<ul> +<li>4.7µH 20% 3.8A 27mOhm Inductor (Digikey: 445-6538-2-ND)</li> +<li>6.8µH 20% 3A 41mOhm Inductor (Digikey: 445-6540-1-ND)</li> +<li>6.2µH 30% 2.2A 45mOhm Inductor (Digikey: SRR5028-6R2YCT-ND) - Not TDK VLC6045 but footprint should match</li> +</ul> +<p>6.0x6.0mm (TDK SLF6045 Series)</p> +<ul> +<li>6.8uH 30% 2A 33mOhm Inductor (Digikey: 445-4572-1-ND, Mouser: 810-SLF645T6R8N2R0PF)</li> +</ul> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>NPN Transistors</b><p> +<author>Created by librarian@cadsoft.de</author> + + +TO-236 ITT Intermetall + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +<b>NPN Transistor</b> + + + + + + + + + + + + + + + + + + + + + + + +Shielding cabinet SMD- Frame WE-SHC<br> +20.0 x 20.0 x 3.0 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +Shielding cabinet SMD- Frame WE-SHC<br> +25.0 x 25.0 x 3.0 mm + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +Shielding cabinet SMD- Frame WE-SHC<br> +30.0 x 30.0 x 3.0 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +Shielding cabinet SMD- Frame WE-SHC<br> +50.0 x 50.0 x 5.0 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +Shielding cabinet SMD- Frame WE-SHC<br> +60.0 x 60.0 x 5.0 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +Shielding cabinet THT- Frame WE-SHC<br> +20.0 x 20.0 x 3.0 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +Shielding cabinet THT- Frame WE-SHC<br> +25.0 x 25.0 x 3.0 mm + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +Shielding cabinet THT- Frame WE-SHC<br> +30.0 x 30.0 x 3.0 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +Shielding cabinet THT- Frame WE-SHC<br> +50.0 x 50.0 x 3.0 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +Shielding cabinet THT- Frame WE-SHC<br> +60.0 x 60.0 x 3.0 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +>NAME +>VALUE + + + + + +WE-SHC Shielding cabinet + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Diodes</b><p> +Based on the following sources: +<ul> +<li>Motorola : www.onsemi.com +<li>Fairchild : www.fairchildsemi.com +<li>Philips : www.semiconductors.com +<li>Vishay : www.vishay.de +</ul> +<author>Created by librarian@cadsoft.de</author> + + +<B>DIODE</B> + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>Schottky Diodes</b><p> +Source: Fairchild .. BAT54.pdf + + + + + + + + + + + + + + + + + + +<b>Maxim Components</b><p> + +<author>Created by librarian@cadsoft.de</author> + + +<b>Small Outline Package</b> SOIC 150 mil + + + + + + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +<b>VOLTAGE CONVERTER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b> Developed By element14 </b><p> + +For feedback and Technical support please contact reach from below: +<br> Tech Support e-mail : <a href="mailto:CAD_Tech@element14.com">CAD_Tech@element14.com</a> +<br>Community website: <a href=http://www.element14.com/community/community/knode/cad_tools/cadsoft_eagle/eagle_cad_libraries> +EAGLE CAD Libraries on element14</a> + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + +Aluminum Electrolytic Capacitors,Surface Mount Type + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +* + + + +* +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + +Low-Dropout CMOS Voltage Regulator + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. +You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). +This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" +to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. +Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, +if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +>NAME +>VALUE + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + +>Name +>Value ++ +- +S + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + +>Name +>Value + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>Value +>Name + + + + + + + + + + + + + + + + + + + + +<h3>SMD 3-Pin Male Right-Angle Header w/ Alignment posts</h3> + +Matches 4UCONN part # 11026<br> +<a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf">http://www.4uconnector.com/online/object/4udrawing/11026.pdf</a> + + + + + + + + + + + + + + + + + + + + +This 3-pin connector mates with the JST cable sold on SparkFun. + + + + + + + + + + + +>Name +>Value ++ +- +S + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. +You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). +This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" +to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. +Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, +if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment +will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + +>Name +>Value ++ +- +S +S + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>Name +>Value ++ +- +Y +B + + + + + + + + + + + + +>Value +>Name + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + +<b>Header 3</b> +Standard 3-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Header 4</b> +Standard 4-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b> Developed By element14 </b><p> + +For feedback and Technical support please contact reach from below: +<br> Tech Support e-mail : <a href="mailto:CAD_Tech@element14.com">CAD_Tech@element14.com</a> +<br>Community website: <a href=http://www.element14.com/community/community/knode/cad_tools/cadsoft_eagle/eagle_cad_libraries> +EAGLE CAD Libraries on element14</a> + + + + + + + + + + + + + + +* + + + + + + + + + + + + + + + + + +* +>NAME +>VALUE + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +Chip Resistor Array + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +* + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +* +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + +Single Inverter with Schmitt-Trigger Input + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + +>NAME + + + + + +Throughhole testpoint with neat footprint + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +CrypTech avalanche noise evaluation board, rev 02 + +Novena interface (stripped down GPBB board) +DC/DC converter +Noise generator +Amplifier +Extra +Noisy diode +Digitizer +VCC 3.3V regulator +Lowpass filter +to remove spikes +Lowpass filter +LC filter + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + + diff --git a/Novena-entropy-board/rev03_bottom.pdf b/Novena-entropy-board/rev03_bottom.pdf new file mode 100644 index 0000000..26d9a56 Binary files /dev/null and b/Novena-entropy-board/rev03_bottom.pdf differ diff --git a/Novena-entropy-board/rev03_brd.pdf b/Novena-entropy-board/rev03_brd.pdf new file mode 100644 index 0000000..38a5246 Binary files /dev/null and b/Novena-entropy-board/rev03_brd.pdf differ diff --git a/Novena-entropy-board/rev03_sch.pdf b/Novena-entropy-board/rev03_sch.pdf new file mode 100644 index 0000000..20d5321 Binary files /dev/null and b/Novena-entropy-board/rev03_sch.pdf differ diff --git a/Novena-entropy-board/rev03_top.pdf b/Novena-entropy-board/rev03_top.pdf new file mode 100644 index 0000000..0296f88 Binary files /dev/null and b/Novena-entropy-board/rev03_top.pdf differ -- cgit v1.2.3