//======================================================================
//
// mkmif_spi.v
// -----------
// SPI interface for the master key memory. When enabled the
// interface waits for command to transmit and receive a given
// number of bytes. Data is transmitted onto the spi_di port
// from the MSB of the spi_data register. Simultaneously,
// data captured on the spi_do port is inserted at LSB in the
// spi_data register. The spi clock is generated when data is to be
// sent or recived.
//
//
// Author: Joachim Strombergson
// Copyright (c) 2011, NORDUnet A/S All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// - Redistributions of source code must retain the above copyright notice,
//   this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
//   be used to endorse or promote products derived from this software
//   without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================

module mkmif_spi(
                 input wire           clk,
                 input wire           reset_n,

                 output wire          spi_sclk,
                 output wire          spi_cs_n,
                 input wire           spi_do,
                 output wire          spi_di,

                 input wire           set,
                 input wire           start,
                 input wire [2 : 0]   length,
                 input wire [15 : 0]  divisor,
                 output wire          ready,
                 input wire [55 : 0]  wr_data,
                 output wire [31 : 0] rd_data
                );


  //----------------------------------------------------------------
  // Internal constant and parameter definitions.
  //----------------------------------------------------------------
  localparam CTRL_IDLE  = 2'h0;
  localparam CTRL_START = 2'h1;
  localparam CTRL_WAIT  = 2'h2;
  localparam CTRL_DONE  = 2'h3;


  //----------------------------------------------------------------
  // Registers including update variables and write enable.
  //----------------------------------------------------------------
  reg          do_sample0_reg;
  reg          do_sample1_reg;

  reg          cs_n_reg;
  reg          cs_n_new;
  reg          cs_n_we;

  reg          ready_reg;
  reg          ready_new;
  reg          ready_we;

  reg [55 : 0] data_reg;
  reg [55 : 0] data_new;
  reg          data_set;
  reg          data_nxt;
  reg          data_we;

  reg          sclk_reg;
  reg          sclk_new;
  reg          sclk_rst;
  reg          sclk_en;
  reg          sclk_we;

  reg [15 : 0] clk_ctr_reg;
  reg [15 : 0] clk_ctr_new;
  reg          clk_ctr_we;

  reg  [5 : 0] bit_ctr_reg;
  reg  [5 : 0] bit_ctr_new;
  reg          bit_ctr_rst;
  reg          bit_ctr_inc;
  reg          bit_ctr_done;
  reg          bit_ctr_we;

  reg [2 : 0]  length_reg;
  reg          length_we;

  reg [15 : 0] divisor_reg;
  reg          divisor_we;

  reg  [1 : 0] spi_ctrl_reg;
  reg  [1 : 0] spi_ctrl_new;
  reg          spi_ctrl_we;


  //----------------------------------------------------------------
  // Wires.
  //----------------------------------------------------------------


  //----------------------------------------------------------------
  // Concurrent connectivity for ports etc.
  //----------------------------------------------------------------
  assign spi_sclk = sclk_reg;
  assign spi_cs_n = cs_n_reg;
  assign spi_di   = data_reg[55];
  assign rd_data  = data_reg[31 : 0];
  assign ready    = ready_reg;


  //----------------------------------------------------------------
  // reg_update
  // Update functionality for all registers in the core.
  // All registers are positive edge triggered with asynchronous
  // active low reset.
  //----------------------------------------------------------------
  always @ (posedge clk or negedge reset_n)
    begin
      if (!reset_n)
        begin
          do_sample0_reg <= 1'h0;
          do_sample1_reg <= 1'h0;
          cs_n_reg       <= 1'h1;
          ready_reg      <= 1'h0;
          length_reg     <= 3'h0;
          divisor_reg    <= 16'h0;
          data_reg       <= 56'h0;
          sclk_reg       <= 1'h0;
          clk_ctr_reg    <= 16'h0;
          bit_ctr_reg    <= 6'h0;
          spi_ctrl_reg   <= CTRL_IDLE;
        end
      else
        begin
          do_sample0_reg <= spi_do;
          do_sample1_reg <= do_sample0_reg;

          if (cs_n_we)
            cs_n_reg <= cs_n_new;

          if (ready_we)
            ready_reg <= ready_new;

          if (data_we)
            data_reg <= data_new;

          if (length_we)
            length_reg <= length;

          if (divisor_we)
            divisor_reg <= divisor;

          if (sclk_we)
            sclk_reg <= sclk_new;

          if (clk_ctr_we)
            clk_ctr_reg <= clk_ctr_new;

          if (bit_ctr_we)
            bit_ctr_reg <= bit_ctr_new;

          if (spi_ctrl_we)
            spi_ctrl_reg <= spi_ctrl_new;

        end
    end // reg_update


  //----------------------------------------------------------------
  // data_gen
  //
  // Generate the data bitstream to be written out to the external
  // SPI connected memory. Basically a shift register.
  // Note that we also shift in data received from the external
  // memory.
  //----------------------------------------------------------------
  always @*
    begin : data_gen
      data_new = 56'h0;
      data_we  = 0;

      if (data_set)
        begin
          data_new = wr_data;
          data_we  = 1;
        end

      if (data_nxt)
        begin
          data_new = {data_reg[54 : 0], do_sample1_reg};
          data_we  = 1;
        end
    end // data_gen


  //----------------------------------------------------------------
  // sclk_gen
  //
  // Generator of the spi_sclk clock.
  //----------------------------------------------------------------
  always @*
    begin : sclk_gen
      sclk_new     = 0;
      sclk_we      = 0;
      clk_ctr_new  = 0;
      clk_ctr_we   = 0;
      data_nxt     = 0;
      bit_ctr_rst  = 0;
      bit_ctr_inc  = 0;

      if (sclk_rst)
        begin
          clk_ctr_new = 0;
          clk_ctr_we  = 1;
          bit_ctr_rst = 1;
          sclk_new    = 0;
          sclk_we     = 1;
        end

      if (sclk_en)
        begin
          if (clk_ctr_reg == divisor_reg)
            begin
              clk_ctr_new = 0;
              clk_ctr_we  = 1'b1;
              sclk_new    = ~sclk_reg;
              sclk_we     = 1;

              if (sclk_reg)
                begin
                  bit_ctr_inc = 1;
                  data_nxt    = 1;
                end
            end
          else
            begin
              clk_ctr_new = clk_ctr_reg + 1'b1;
              clk_ctr_we  = 1'b1;
            end
        end
    end // sclk_gen


  //----------------------------------------------------------------
  // bit_ctr
  //
  // Bit counter used by the FSM to keep track of the number bits
  // being read from or written to the memory.
  //----------------------------------------------------------------
  always @*
    begin : bit_ctr
      bit_ctr_new  = 6'h0;
      bit_ctr_we   = 1'b0;
      bit_ctr_done = 1'b0;

      if (bit_ctr_reg == {length_reg, 3'h0})
        bit_ctr_done = 1'b1;

      if (bit_ctr_rst)
        begin
          bit_ctr_new = 6'h0;
          bit_ctr_we  = 1'b1;
        end

      if (bit_ctr_inc)
        begin
          bit_ctr_new = bit_ctr_reg + 1'b1;
          bit_ctr_we  = 1'b1;
        end
    end // bit_ctr


  //----------------------------------------------------------------
  // spi_ctrl
  //
  // Control FSM for the SPI interface.
  //----------------------------------------------------------------
  always @*
    begin : spi_ctrl
      sclk_en      = 0;
      sclk_rst     = 0;
      cs_n_new     = 1;
      cs_n_we      = 0;
      data_set     = 0;
      length_we    = 0;
      divisor_we   = 0;
      ready_new    = 0;
      ready_we     = 0;
      spi_ctrl_new = CTRL_IDLE;
      spi_ctrl_we  = 0;

      case (spi_ctrl_reg)
        CTRL_IDLE:
          begin
            ready_new = 1;
            ready_we  = 1;

            if (set)
              begin
                data_set   = 1;
                length_we  = 1;
                divisor_we = 1;
              end

            if (start)
              begin
                ready_new    = 0;
                ready_we     = 1;
                sclk_rst     = 1;
                spi_ctrl_new = CTRL_START;
                spi_ctrl_we  = 1;
              end
          end

        CTRL_START:
          begin
            cs_n_new    = 0;
            cs_n_we     = 1;
            spi_ctrl_new = CTRL_WAIT;
            spi_ctrl_we  = 1;
          end

        CTRL_WAIT:
          begin
            sclk_en = 1;
            if (bit_ctr_done)
              begin
                spi_ctrl_new = CTRL_DONE;
                spi_ctrl_we  = 1;
              end
          end

        CTRL_DONE:
          begin
            ready_new    = 1;
            ready_we     = 1;
            cs_n_new     = 1;
            cs_n_we      = 1;
            spi_ctrl_new = CTRL_IDLE;
            spi_ctrl_we  = 1;
          end

        default:
          begin
          end
      endcase // case (spi_ctrl_reg)
    end // spi_ctrl

endmodule // mkmif_spi

//======================================================================
// EOF mkmif_spi.v
//======================================================================