Oops! Removing file that should not have been in the commit.

1 files changed, 0 insertions, 78 deletions

diff --git a/toolruns/mem.sim b/toolruns/mem.sim
deleted file mode 100755
index 96aff4a..0000000
--- a/toolruns/mem.sim
+++ /dev/null
@@ -1,78 +0,0 @@
-#! /usr/local/Cellar/icarus-verilog/HEAD/bin/vvp
-:ivl_version "11.0 (devel)" "(a1e0040)";
-:ivl_delay_selection "TYPICAL";
-:vpi_time_precision + 0;
-:vpi_module "system";
-:vpi_module "vhdl_sys";
-:vpi_module "v2005_math";
-:vpi_module "va_math";
-S_0x7ff56cd001b0 .scope module, "keywrap_mem" "keywrap_mem" 2 40;
- .timescale 0 0;
-    .port_info 0 /INPUT 1 "sys_clk"
-    .port_info 1 /INPUT 1 "reset_n"
-o0x1004b5008 .functor BUFZ 1, C4<z>; HiZ drive
-v0x7ff56cd00620_0 .net "reset_n", 0 0, o0x1004b5008;  0 drivers
-o0x1004b5038 .functor BUFZ 1, C4<z>; HiZ drive
-v0x7ff56cd10660_0 .net "sys_clk", 0 0, o0x1004b5038;  0 drivers
-S_0x7ff56cd00340 .scope module, "tb_keywrap_mem" "tb_keywrap_mem" 3 40;
- .timescale 0 0;
-P_0x7ff56cd004a0 .param/l "CLK_HALF_PERIOD" 0 3 42, +C4<00000000000000000000000000000001>;
-P_0x7ff56cd004e0 .param/l "CLK_PERIOD" 0 3 43, +C4<0000000000000000000000000000000000000000000000000000000000000010>;
-v0x7ff56cd10a80_0 .var/i "cycle_ctr", 31 0;
-v0x7ff56cd10b30_0 .var "tb_reset_n", 0 0;
-v0x7ff56cd10bd0_0 .var "tb_sys_clk", 0 0;
-S_0x7ff56cd10710 .scope begin, "clk_gen" "clk_gen" 3 56, 3 56 0, S_0x7ff56cd00340;
- .timescale 0 0;
-S_0x7ff56cd108c0 .scope begin, "sys_monitor" "sys_monitor" 3 69, 3 69 0, S_0x7ff56cd00340;
- .timescale 0 0;
-    .scope S_0x7ff56cd00340;
-T_0 ;
-    %fork t_1, S_0x7ff56cd10710;
-    %jmp t_0;
-    .scope S_0x7ff56cd10710;
-t_1 ;
-    %delay 1, 0;
-    %load/vec4 v0x7ff56cd10bd0_0;
-    %nor/r;
-    %store/vec4 v0x7ff56cd10bd0_0, 0, 1;
-    %end;
-    .scope S_0x7ff56cd00340;
-t_0 %join;
-    %jmp T_0;
-    .thread T_0;
-    .scope S_0x7ff56cd00340;
-T_1 ;
-    %fork t_3, S_0x7ff56cd108c0;
-    %jmp t_2;
-    .scope S_0x7ff56cd108c0;
-t_3 ;
-    %load/vec4 v0x7ff56cd10a80_0;
-    %addi 1, 0, 32;
-    %store/vec4 v0x7ff56cd10a80_0, 0, 32;
-    %delay 2, 0;
-    %end;
-    .scope S_0x7ff56cd00340;
-t_2 %join;
-    %jmp T_1;
-    .thread T_1;
-    .scope S_0x7ff56cd00340;
-T_2 ;
-    %pushi/vec4 0, 0, 32;
-    %store/vec4 v0x7ff56cd10a80_0, 0, 32;
-    %pushi/vec4 0, 0, 1;
-    %store/vec4 v0x7ff56cd10bd0_0, 0, 1;
-    %pushi/vec4 0, 0, 1;
-    %store/vec4 v0x7ff56cd10b30_0, 0, 1;
-    %delay 20, 0;
-    %pushi/vec4 1, 0, 1;
-    %store/vec4 v0x7ff56cd10b30_0, 0, 1;
-    %delay 20, 0;
-    %vpi_call 3 93 "$finish" {0 0 0};
-    %end;
-    .thread T_2;
-# The file index is used to find the file name in the following table.
-:file_names 4;
-    "N/A";
-    "<interactive>";
-    "../src/rtl/keywrap_mem.v";
-    "../src/tb/tb_keywrap_mem.v";