aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/tb/tb_trng.v245
1 files changed, 245 insertions, 0 deletions
diff --git a/src/tb/tb_trng.v b/src/tb/tb_trng.v
new file mode 100644
index 0000000..704d4ea
--- /dev/null
+++ b/src/tb/tb_trng.v
@@ -0,0 +1,245 @@
+//======================================================================
+//
+// tb_trng.v
+// -----------
+// Testbench for the trng module in the trng.
+//
+//
+// Author: Joachim Strombergson
+// Copyright (c) 2014, NORDUnet A/S All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+// - Redistributions of source code must retain the above copyright notice,
+// this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may
+// be used to endorse or promote products derived from this software
+// without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+//======================================================================
+
+//------------------------------------------------------------------
+// Simulator directives.
+//------------------------------------------------------------------
+`timescale 1ns/100ps
+
+
+//------------------------------------------------------------------
+// Test module.
+//------------------------------------------------------------------
+module tb_trng();
+
+ //----------------------------------------------------------------
+ // Internal constant and parameter definitions.
+ //----------------------------------------------------------------
+ parameter DEBUG = 1;
+
+ parameter CLK_HALF_PERIOD = 1;
+ parameter CLK_PERIOD = 2 * CLK_HALF_PERIOD;
+
+
+ //----------------------------------------------------------------
+ // Register and Wire declarations.
+ //----------------------------------------------------------------
+ reg [31 : 0] cycle_ctr;
+ reg [31 : 0] error_ctr;
+ reg [31 : 0] tc_ctr;
+
+ reg tb_clk;
+ reg tb_reset_n;
+ reg tb_avalanche_noise;
+ reg tb_cs;
+ reg tb_we;
+ reg [7 : 0] tb_address;
+ reg [31 : 0] tb_write_data;
+ wire [31 : 0] tb_read_data;
+ wire tb_error;
+ wire tb_security_error;
+
+
+ //----------------------------------------------------------------
+ // Device Under Test.
+ //----------------------------------------------------------------
+ trng dut(
+ .clk(tb_ckl),
+ .reset_n(tb_reset_n),
+ .avalanche_noise(tb_avalanche_noise),
+ .cs(tb_cs),
+ .we(tb_we),
+ .address(tb_address),
+ .write_data(tb_write_data),
+ .read_data(tb_read_data),
+ .error(tb_error),
+ .security_error(tb_security_error)
+ );
+
+
+ //----------------------------------------------------------------
+ // clk_gen
+ //
+ // Always running clock generator process.
+ //----------------------------------------------------------------
+ always
+ begin : clk_gen
+ #CLK_HALF_PERIOD;
+ tb_clk = !tb_clk;
+ end // clk_gen
+
+
+ //----------------------------------------------------------------
+ // sys_monitor()
+ //
+ // An always running process that creates a cycle counter and
+ // conditionally displays information about the DUT.
+ //----------------------------------------------------------------
+ always
+ begin : sys_monitor
+ cycle_ctr = cycle_ctr + 1;
+
+ #(CLK_PERIOD);
+
+ if (DEBUG)
+ begin
+ dump_dut_state();
+ end
+ end
+
+
+ //----------------------------------------------------------------
+ // dump_dut_state()
+ //
+ // Dump the state of the dump when needed.
+ //----------------------------------------------------------------
+ task dump_dut_state();
+ begin
+ $display("cycle: 0x%016x", cycle_ctr);
+ $display("State of DUT");
+ $display("------------");
+ $display("");
+ end
+ endtask // dump_dut_state
+
+
+ //----------------------------------------------------------------
+ // reset_dut()
+ //
+ // Toggle reset to put the DUT into a well known state.
+ //----------------------------------------------------------------
+ task reset_dut();
+ begin
+ $display("*** Toggle reset.");
+ tb_reset_n = 0;
+
+ #(2 * CLK_PERIOD);
+ tb_reset_n = 1;
+ $display("");
+ end
+ endtask // reset_dut
+
+
+ //----------------------------------------------------------------
+ // display_test_results()
+ //
+ // Display the accumulated test results.
+ //----------------------------------------------------------------
+ task display_test_results();
+ begin
+ if (error_ctr == 0)
+ begin
+ $display("*** All %02d test cases completed successfully", tc_ctr);
+ end
+ else
+ begin
+ $display("*** %02d tests completed - %02d test cases did not complete successfully.",
+ tc_ctr, error_ctr);
+ end
+ end
+ endtask // display_test_results
+
+
+ //----------------------------------------------------------------
+ // init_sim()
+ //
+ // Initialize all counters and testbed functionality as well
+ // as setting the DUT inputs to defined values.
+ //----------------------------------------------------------------
+ task init_sim();
+ begin
+ cycle_ctr = 0;
+ error_ctr = 0;
+ tc_ctr = 0;
+
+ tb_clk = 0;
+ tb_reset_n = 1;
+
+ end
+ endtask // init_sim
+
+
+ //----------------------------------------------------------------
+ // tc1_gen_rnd()
+ //
+ // A simple first testcase that tries to make the DUT generate
+ // a number of seeds based on entropy from source 0 and 2.
+ //----------------------------------------------------------------
+ task tc1_gen_rnd();
+ begin
+ $display("*** Starting TC1: Generating random values from entropy.");
+
+
+ #(50000 * CLK_PERIOD);
+
+
+ $display("*** TC1 done.");
+ end
+ endtask // tc1_gen_seeds
+
+
+ //----------------------------------------------------------------
+ // trng_test
+ //
+ // The main test functionality.
+ //----------------------------------------------------------------
+ initial
+ begin : trng_test
+
+ $display(" -= Testbench for TRNG started =-");
+ $display(" ===============================");
+ $display("");
+
+ init_sim();
+ dump_dut_state();
+ reset_dut();
+ dump_dut_state();
+
+ tc1_gen_rnd();
+
+ display_test_results();
+
+ $display("");
+ $display("*** TRNG simulation done. ***");
+ $finish;
+ end // trng_test
+endmodule // tb_trng
+
+//======================================================================
+// EOF tb_trng.v
+//======================================================================