From 6ff77cfa730f54eb81eae3ba8e63cfdbd423e306 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Joachim=20Stro=CC=88mbergson?= Date: Mon, 17 Mar 2014 11:22:36 +0100 Subject: Adding test program that checks the SHA-1 and SHA-256 cores and do single block hashing. --- src/sw/hash_tester.py | 394 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 394 insertions(+) create mode 100755 src/sw/hash_tester.py diff --git a/src/sw/hash_tester.py b/src/sw/hash_tester.py new file mode 100755 index 0000000..73d64e2 --- /dev/null +++ b/src/sw/hash_tester.py @@ -0,0 +1,394 @@ +#!/usr/bin/env python +# -*- coding: utf-8 -*- +#======================================================================= +# +# hash_tester.py +# -------------- +# This program sends several commands to the coretest_hashed subsystem +# in order to verify the SHA-1 and SHA-256 hash function cores. +# The program uses the built in hash implementations in Python +# to do functional comparison and validation. +# +# Note: This program requires the PySerial module. +# http://pyserial.sourceforge.net/ +# +# +# Author: Joachim Strombergson +# Copyright (c) 2014, Secworks Sweden AB +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or +# without modification, are permitted provided that the following +# conditions are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +#======================================================================= + +#------------------------------------------------------------------- +# Python module imports. +#------------------------------------------------------------------- +import sys +import serial +import os +import time +import threading + + +#------------------------------------------------------------------- +# Defines. +#------------------------------------------------------------------- +VERBOSE = False + +# Memory map. +SOC = '\x55' +EOC = '\xaa' +READ_CMD = '\x10' +WRITE_CMD = '\x11' + +UART_ADDR_PREFIX = '\x00' + +SHA1_ADDR_PREFIX = '\x10' +SHA1_ADDR_NAME0 = '\x00' +SHA1_ADDR_NAME1 = '\x01' +SHA1_ADDR_VERSION = '\x02' +SHA1_ADDR_CTRL = '\x08' +SHA1_CTRL_INIT_BIT = 0 +SHA1_CTRL_NEXT_BIT = 1 +SHA1_ADDR_STATUS = '\x09' +SHA1_STATUS_READY_BIT = 0 +SHA1_STATUS_VALID_BIT = 1 +SHA1_ADDR_BLOCK0 = '\x10' +SHA1_ADDR_BLOCK1 = '\x11' +SHA1_ADDR_BLOCK2 = '\x12' +SHA1_ADDR_BLOCK3 = '\x13' +SHA1_ADDR_BLOCK4 = '\x14' +SHA1_ADDR_BLOCK5 = '\x15' +SHA1_ADDR_BLOCK6 = '\x16' +SHA1_ADDR_BLOCK7 = '\x17' +SHA1_ADDR_BLOCK8 = '\x18' +SHA1_ADDR_BLOCK9 = '\x19' +SHA1_ADDR_BLOCK10 = '\x1a' +SHA1_ADDR_BLOCK11 = '\x1b' +SHA1_ADDR_BLOCK12 = '\x1c' +SHA1_ADDR_BLOCK13 = '\x1d' +SHA1_ADDR_BLOCK14 = '\x1e' +SHA1_ADDR_BLOCK15 = '\x1f' +SHA1_ADDR_DIGEST0 = '\x20' +SHA1_ADDR_DIGEST1 = '\x21' +SHA1_ADDR_DIGEST2 = '\x22' +SHA1_ADDR_DIGEST3 = '\x23' +SHA1_ADDR_DIGEST4 = '\x24' + +SHA256_ADDR_PREFIX = '\x20' +SHA256_ADDR_NAME0 = '\x00' +SHA256_ADDR_NAME1 = '\x01' +SHA256_ADDR_VERSION = '\x02' +SHA256_ADDR_CTRL = '\x08' +SHA256_CTRL_INIT_BIT = 0 +SHA256_CTRL_NEXT_BIT = 1 +SHA256_ADDR_STATUS = '\x09' +SHA256_STATUS_READY_BIT = 0 +SHA256_STATUS_VALID_BIT = 1 +SHA256_ADDR_BLOCK0 = '\x10' +SHA256_ADDR_BLOCK1 = '\x11' +SHA256_ADDR_BLOCK2 = '\x12' +SHA256_ADDR_BLOCK3 = '\x13' +SHA256_ADDR_BLOCK4 = '\x14' +SHA256_ADDR_BLOCK5 = '\x15' +SHA256_ADDR_BLOCK6 = '\x16' +SHA256_ADDR_BLOCK7 = '\x17' +SHA256_ADDR_BLOCK8 = '\x18' +SHA256_ADDR_BLOCK9 = '\x19' +SHA256_ADDR_BLOCK10 = '\x1a' +SHA256_ADDR_BLOCK11 = '\x1b' +SHA256_ADDR_BLOCK12 = '\x1c' +SHA256_ADDR_BLOCK13 = '\x1d' +SHA256_ADDR_BLOCK14 = '\x1e' +SHA256_ADDR_BLOCK15 = '\x1f' +SHA256_ADDR_DIGEST0 = '\x20' +SHA256_ADDR_DIGEST1 = '\x21' +SHA256_ADDR_DIGEST2 = '\x22' +SHA256_ADDR_DIGEST3 = '\x23' +SHA256_ADDR_DIGEST4 = '\x24' +SHA256_ADDR_DIGEST5 = '\x25' +SHA256_ADDR_DIGEST6 = '\x26' +SHA256_ADDR_DIGEST7 = '\x27' + +NAME0_ADDR = '\x00' +NAME1_ADDR = '\x01' +VERSION_ADDR = '\x02' + + +#------------------------------------------------------------------- +# print_response() +# +# Parses a received buffer and prints the response. +#------------------------------------------------------------------- +def print_response(buffer): + if VERBOSE: + print "Length of response: %d" % len(buffer) + if buffer[0] == '\xaa': + print "Response contains correct Start of Response (SOR)" + if buffer[-1] == '\x55': + print "Response contains correct End of Response (EOR)" + + response_code = ord(buffer[1]) + + if response_code == 0xfe: + print "UNKNOWN response code received." + + elif response_code == 0xfd: + print "ERROR response code received." + + elif response_code == 0x7f: + read_addr = ord(buffer[2]) * 256 + ord(buffer[3]) + read_data = (ord(buffer[4]) * 16777216) + (ord(buffer[5]) * 65536) +\ + (ord(buffer[6]) * 256) + ord(buffer[7]) + print "READ_OK. address 0x%02x = 0x%08x." % (read_addr, read_data) + + elif response_code == 0x7e: + read_addr = ord(buffer[2]) * 256 + ord(buffer[3]) + print "WRITE_OK. address 0x%02x." % (read_addr) + + elif response_code == 0x7d: + print "RESET_OK." + + else: + print "Response 0x%02x is unknown." % response_code + print buffer + + +#------------------------------------------------------------------- +# read_serial_thread() +# +# Function used in a thread to read from the serial port and +# collect response from coretest. +#------------------------------------------------------------------- +def read_serial_thread(serialport): + if VERBOSE: + print "Serial port response thread started. Waiting for response..." + + buffer = [] + while True: + response = serialport.read() + buffer.append(response) + if response == '\x55': + print_response(buffer) + buffer = [] + + +#------------------------------------------------------------------- +# write_serial_bytes() +# +# Send the bytes in the buffer to coretest over the serial port. +#------------------------------------------------------------------- +def write_serial_bytes(tx_cmd, serialport): + if VERBOSE: + print "Command to be sent:", tx_cmd + + for tx_byte in tx_cmd: + serialport.write(tx_byte) + + # Allow the device to complete the transaction. + time.sleep(0.1) + + +#------------------------------------------------------------------- +# main() +# +# Parse any arguments and run the tests. +#------------------------------------------------------------------- +def main(): + # Open device + ser = serial.Serial() + ser.port='/dev/cu.usbserial-A801SA6T' + ser.baudrate=9600 + ser.bytesize=8 + ser.parity='N' + ser.stopbits=1 + ser.timeout=1 + ser.writeTimeout=0 + + if VERBOSE: + print "Setting up a serial port and starting a receive thread." + + try: + ser.open() + except: + print "Error: Can't open serial device." + sys.exit(1) + + try: + my_thread = threading.Thread(target=read_serial_thread, args=(ser,)) + except: + print "Error: Can't start thread." + sys.exit() + + my_thread.daemon = True + my_thread.start() + + # TC1-1: Read name and version from SHA-1 core. + print "TC1-1: Reading name, type and version words from SHA-1 core." + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_NAME0, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_NAME1, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_VERSION, EOC], ser) + print"" + + # TC1-2: Writing and reading a block into the SHA-1 core. + print "TC1-2: Writing and reading a block into the SHA-1 core." + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK0, '\x61', '\x62', '\x63', '\x80', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK1, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK2, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK3, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK4, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK5, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK6, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK7, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK8, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK9, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK10, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK11, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK12, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK13, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK14, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK15, '\x00', '\x00', '\x00', '\x18', EOC], ser) + print "TC1-2: All block words written. Time to read." + + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK0, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK1, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK2, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK3, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK4, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK5, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK6, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK7, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK8, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK9, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK10, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK11, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK12, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK13, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK14, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK15, EOC], ser) + print "TC1-2: All block words read." + print"" + + # TC1-3: Running single block procssing on SHA-1 with the current block. + print "TC1-3: Starting the SHA-1 core on single block procssing with the current block." + write_serial_bytes([SOC, WRITE_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_CTRL, '\x00', '\x00', '\x00', '\x01', EOC], ser) + time.sleep(0.1) + print "TC1-3: Reading SHA-1 status and digest." + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_STATUS, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_DIGEST0, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_DIGEST1, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_DIGEST2, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_DIGEST3, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA1_ADDR_PREFIX, SHA1_ADDR_DIGEST4, EOC], ser) + print"" + + # TC2-1: Read name and version from SHA-256 core. + print "TC2-1: Reading name, type and version words from SHA-256 core." + my_cmd = [SOC, READ_CMD, SHA256_ADDR_PREFIX, NAME0_ADDR, EOC] + write_serial_bytes(my_cmd, ser) + my_cmd = [SOC, READ_CMD, SHA256_ADDR_PREFIX, NAME1_ADDR, EOC] + write_serial_bytes(my_cmd, ser) + my_cmd = [SOC, READ_CMD, SHA256_ADDR_PREFIX, VERSION_ADDR, EOC] + write_serial_bytes(my_cmd, ser) + print"" + + + # TC2-2: Writing and reading a block into the SHA-256 core. + print "TC2-2: Writing and reading a block into the SHA-256 core." + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK0, '\x61', '\x62', '\x63', '\x80', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK1, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK2, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK3, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK4, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK5, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK6, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK7, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK8, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK9, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK10, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK11, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK12, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK13, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK14, '\x00', '\x00', '\x00', '\x00', EOC], ser) + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK15, '\x00', '\x00', '\x00', '\x18', EOC], ser) + print "TC1-2: All block words written. Time to read." + + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK0, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK1, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK2, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK3, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK4, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK5, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK6, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK7, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK8, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK9, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK10, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK11, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK12, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK13, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK14, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK15, EOC], ser) + print "TC2-2: All block words read." + print"" + + + # TC2-3: Running single block procssing on SHA-256 with the current block. + print "TC2-3: Starting the SHA-256 core on single block procssing with the current block." + write_serial_bytes([SOC, WRITE_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_CTRL, '\x00', '\x00', '\x00', '\x01', EOC], ser) + time.sleep(0.1) + print "TC2-3: Reading SHA-256 status and digest." + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_STATUS, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_DIGEST0, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_DIGEST1, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_DIGEST2, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_DIGEST3, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_DIGEST4, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_DIGEST5, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_DIGEST6, EOC], ser) + write_serial_bytes([SOC, READ_CMD, SHA256_ADDR_PREFIX, SHA256_ADDR_DIGEST7, EOC], ser) + print"" + + # Exit nicely. + if VERBOSE: + print "Done. Closing device." + ser.close() + + +#------------------------------------------------------------------- +# __name__ +# Python thingy which allows the file to be run standalone as +# well as parsed from within a Python interpreter. +#------------------------------------------------------------------- +if __name__=="__main__": + # Run the main function. + sys.exit(main()) + + +#======================================================================= +# EOF hash_tester.py +#======================================================================= -- cgit v1.2.3