From 5311cc678dc82222146a384080d5f2bc95cb1eb6 Mon Sep 17 00:00:00 2001 From: Paul Selkirk Date: Tue, 5 May 2015 16:13:47 -0400 Subject: Document address structure, remove redundant symbols. --- sw/cryptech.h | 131 ++++++++++++++++++++++++++++++++++++---------------------- 1 file changed, 81 insertions(+), 50 deletions(-) (limited to 'sw') diff --git a/sw/cryptech.h b/sw/cryptech.h index e36b71a..186f804 100644 --- a/sw/cryptech.h +++ b/sw/cryptech.h @@ -36,10 +36,46 @@ // //====================================================================== +/* -// Segments. +Each Cryptech core has a set of 4-byte registers, which are accessed +through a 16-bit address. The address space is divided as follows: + 3 bits segment selector | up to 8 segments + 5 bits core selector | up to 32 cores/segment (see note below) + 8 bits register selector | up to 256 registers/core (see modexp below) + +i.e, the address is structured as: +sss ccccc rrrrrrrr + +The I2C and UART communication channels use this 16-bit address format +directly in their read and write commands. + +The EIM communications channel translates this 16-bit address into a +32-bit memory-mapped address in the range 0x08000000..807FFFF: +00001000000000 sss 0 ccccc rrrrrrrr 00 + +EIM, as implemented on the Novena, uses a 19-bit address space: + Bits 18..16 are the semgent selector. + Bits 15..10 are the core selector. + Bits 9..2 are the register selector. + Bits 1..0 are zero, because reads and writes are always word aligned. + +Note that EIM can support 64 cores per segment, but we sacrifice one bit +in order to map it into a 16-bit address space. + +*/ + + +//------------------------------------------------------------------ +// Default sizes +//------------------------------------------------------------------ #define CORE_SIZE 0x100 #define SEGMENT_SIZE 0x20 * CORE_SIZE + + +//------------------------------------------------------------------ +// Segments +//------------------------------------------------------------------ #define SEGMENT_OFFSET_GLOBALS 0 * SEGMENT_SIZE #define SEGMENT_OFFSET_HASHES 1 * SEGMENT_SIZE #define SEGMENT_OFFSET_RNGS 2 * SEGMENT_SIZE @@ -82,6 +118,7 @@ #define COMM_ADDR_NAME1 COMM_ADDR_BASE + ADDR_NAME1 #define COMM_ADDR_VERSION COMM_ADDR_BASE + ADDR_VERSION +// current name and version values #define NOVENA_BOARD_NAME0 "PVT1" #define NOVENA_BOARD_NAME1 " " #define NOVENA_BOARD_VERSION "0.10" @@ -98,7 +135,7 @@ //------------------------------------------------------------------ // Hashes segment. //------------------------------------------------------------------ -// addresses and codes common to all hash cores +// addresses common to all hash cores #define CTRL_INIT_CMD 1 #define CTRL_NEXT_CMD 2 #define ADDR_BLOCK 0x10 @@ -148,6 +185,7 @@ #define MODE_SHA_384 2 << 2 #define MODE_SHA_512 3 << 2 +// current name and version values #define SHA1_NAME0 "sha1" #define SHA1_NAME1 " " #define SHA1_VERSION "0.50" @@ -226,6 +264,7 @@ #define CSPRNG_ADDR_NBLOCKS_LO CSPRNG_ADDR_BASE + 0x41 #define CSPRNG_ADDR_NBLOCKS_HI CSPRNG_ADDR_BASE + 0x42 +// current name and version values #define TRNG_NAME0 "trng" #define TRNG_NAME1 " " #define TRNG_VERSION "0.50" @@ -247,45 +286,40 @@ // CIPHERS segment. // ----------------------------------------------------------------- // aes core. -#define AES_ADDR_BASE SEGMENT_OFFSET_CIPHERS + (0 * CORE_SIZE) -#define AES_ADDR_NAME0 AES_ADDR_BASE + ADDR_NAME0 -#define AES_ADDR_NAME1 AES_ADDR_BASE + ADDR_NAME1 -#define AES_ADDR_VERSION AES_ADDR_BASE + ADDR_VERSION - -#define AES_ADDR_CTRL AES_ADDR_BASE + ADDR_CTRL -#define AES_CTRL_INIT_BIT CTRL_INIT_BIT -#define AES_CTRL_NEXT_BIT CTRL_NEXT_BIT - -#define AES_ADDR_STATUS AES_ADDR_BASE + ADDR_STATUS -#define AES_STATUS_READY_BIT STATUS_READY_BIT -#define AES_STATUS_VALID_BIT STATUS_VALID_BIT - -#define AES_ADDR_CONFIG AES_ADDR_BASE + 0x0a -#define AES_CONFIG_ENCDEC_BIT 1 -#define AES_CONFIG_KEYLEN_BIT 2 - -#define AES_ADDR_KEY0 0x10 -#define AES_ADDR_KEY1 0x11 -#define AES_ADDR_KEY2 0x12 -#define AES_ADDR_KEY3 0x13 -#define AES_ADDR_KEY4 0x14 -#define AES_ADDR_KEY5 0x15 -#define AES_ADDR_KEY6 0x16 -#define AES_ADDR_KEY7 0x17 - -#define AES_ADDR_BLOCK0 0x20 -#define AES_ADDR_BLOCK1 0x21 -#define AES_ADDR_BLOCK2 0x22 -#define AES_ADDR_BLOCK3 0x23 - -#define AES_ADDR_RESULT0 0x30 -#define AES_ADDR_RESULT1 0x31 -#define AES_ADDR_RESULT2 0x32 -#define AES_ADDR_RESULT3 0x33 - -#define AES_CORE_NAME0 "aes " -#define AES_CORE_NAME1 " " -#define AES_CORE_VERSION "0.80" +#define AES_ADDR_BASE SEGMENT_OFFSET_CIPHERS + (0 * CORE_SIZE) +#define AES_ADDR_NAME0 AES_ADDR_BASE + ADDR_NAME0 +#define AES_ADDR_NAME1 AES_ADDR_BASE + ADDR_NAME1 +#define AES_ADDR_VERSION AES_ADDR_BASE + ADDR_VERSION +#define AES_ADDR_CTRL AES_ADDR_BASE + ADDR_CTRL +#define AES_ADDR_STATUS AES_ADDR_BASE + ADDR_STATUS + +#define AES_ADDR_CONFIG AES_ADDR_BASE + 0x0a +#define AES_CONFIG_ENCDEC_BIT 1 +#define AES_CONFIG_KEYLEN_BIT 2 + +#define AES_ADDR_KEY0 0x10 +#define AES_ADDR_KEY1 0x11 +#define AES_ADDR_KEY2 0x12 +#define AES_ADDR_KEY3 0x13 +#define AES_ADDR_KEY4 0x14 +#define AES_ADDR_KEY5 0x15 +#define AES_ADDR_KEY6 0x16 +#define AES_ADDR_KEY7 0x17 + +#define AES_ADDR_BLOCK0 0x20 +#define AES_ADDR_BLOCK1 0x21 +#define AES_ADDR_BLOCK2 0x22 +#define AES_ADDR_BLOCK3 0x23 + +#define AES_ADDR_RESULT0 0x30 +#define AES_ADDR_RESULT1 0x31 +#define AES_ADDR_RESULT2 0x32 +#define AES_ADDR_RESULT3 0x33 + +// current name and version values +#define AES_CORE_NAME0 "aes " +#define AES_CORE_NAME1 " " +#define AES_CORE_VERSION "0.80" // Chacha core @@ -293,17 +327,11 @@ #define CHACHA_ADDR_NAME0 CHACHA_ADDR_BASE + ADDR_NAME0 #define CHACHA_ADDR_NAME1 CHACHA_ADDR_BASE + ADDR_NAME1 #define CHACHA_ADDR_VERSION CHACHA_ADDR_BASE + ADDR_VERSION - #define CHACHA_ADDR_CTRL CHACHA_ADDR_BASE + ADDR_CTRL -#define CHACHA_CTRL_INIT_BIT CTRL_INIT_BIT -#define CHACHA_CTRL_NEXT_BIT CTRL_NEXT_BIT - #define CHACHA_ADDR_STATUS CHACHA_ADDR_BASE + ADDR_STATUS -#define CHACHA_STATUS_READY_BIT STATUS_READY_BIT -#define CHACHA_STATUS_VALID_BIT STATUS_VALID_BIT #define CHACHA_ADDR_KEYLEN 0x0a -#define CHACHA_KEYLEN_BIT 1 +#define CHACHA_KEYLEN 1 #define CHACHA_ADDR_ROUNDS 0x0b @@ -353,6 +381,7 @@ #define CHACHA_ADDR_DATA_OUT14 0x8e #define CHACHA_ADDR_DATA_OUT15 0x8f +// current name and version values #define CHACHA_NAME0 "chac" #define CHACHA_NAME1 "ha " #define CHACHA_VERSION "0.80" @@ -373,8 +402,6 @@ #define MODEXP_ADDR_NAME1 MODEXP_ADDR_BASE + ADDR_NAME1 #define MODEXP_ADDR_VERSION MODEXP_ADDR_BASE + ADDR_VERSION #define MODEXP_ADDR_CTRL MODEXP_ADDR_BASE + ADDR_CTRL -#define MODEXP_CTRL_INIT_BIT 1 -#define MODEXP_CTRL_NEXT_BIT 2 #define MODEXP_ADDR_STATUS MODEXP_ADDR_BASE + ADDR_STATUS #define MODEXP_ADDR_DELAY MODEXP_ADDR_BASE + 0x13 @@ -383,6 +410,10 @@ #define MODEXP_MODULUS_LENGTH MODEXP_ADDR_BASE + 0x20 #define MODEXP_EXPONENT_LENGTH MODEXP_ADDR_BASE + 0x21 +// Most cores need fewer than 256 registers, but Modexp needs many more. +//#define NEXT_MATH_ADDR_BASE SEGMENT_OFFSET_MATH + (0x05 * CORE_SIZE) + +// current name and version values #define MODEXP_NAME0 "mode" #define MODEXP_NAME1 "xp " #define MODEXP_VERSION "0.50" -- cgit v1.2.3