From 283bfbeeb7fb5767815c10ea98bb155638d4bfb3 Mon Sep 17 00:00:00 2001 From: Paul Selkirk Date: Tue, 17 Mar 2015 13:49:30 +0100 Subject: Rearrange cores. --- i2c/rtl/novena_i2c.v | 221 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 221 insertions(+) create mode 100644 i2c/rtl/novena_i2c.v (limited to 'i2c/rtl/novena_i2c.v') diff --git a/i2c/rtl/novena_i2c.v b/i2c/rtl/novena_i2c.v new file mode 100644 index 0000000..1cb47a0 --- /dev/null +++ b/i2c/rtl/novena_i2c.v @@ -0,0 +1,221 @@ +//====================================================================== +// +// novena_top.v +// ------------ +// Top module for the Cryptech Novena FPGA framework with the I2C bus. +// +// +// Author: Pavel Shatov +// Copyright (c) 2015, NORDUnet A/S All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// - Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// - Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the distribution. +// +// - Neither the name of the NORDUnet nor the names of its contributors may +// be used to endorse or promote products derived from this software +// without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS +// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED +// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +//====================================================================== + +module novena_top + ( + // Differential input for 50 MHz general clock. + input wire gclk_p_pin, + input wire gclk_n_pin, + + // Reset controlled by the CPU. + // this must be configured as input w/pullup + input wire reset_mcu_b_pin, + + // Cryptech avalanche noise board input and LED outputs + input wire ct_noise, + output wire [7 : 0] ct_led, + + // I2C interface + input wire i2c_scl, + inout wire i2c_sda, + + // Novena utility ports + output wire apoptosis_pin, // Hold low to not restart after config. + output wire led_pin // LED on edge close to the FPGA. + ); + + + //---------------------------------------------------------------- + // Clock Manager + // + // Clock manager is used to generate SYS_CLK from GCLK + // and implement the reset logic. + // ---------------------------------------------------------------- + wire sys_clk; + wire sys_rst; + + novena_clkmgr clkmgr + ( + .gclk_p(gclk_p_pin), + .gclk_n(gclk_n_pin), + + .reset_mcu_b(reset_mcu_b_pin), + + .sys_clk(sys_clk), + .sys_rst(sys_rst) + ); + + + //---------------------------------------------------------------- + // I2C Interface + // + // I2C subsystem handles all data transfer to/from CPU via I2C bus. + //---------------------------------------------------------------- + parameter I2C_DEVICE_ADDR = 7'h0f; + + wire [16: 0] sys_eim_addr; + wire sys_eim_wr; + wire sys_eim_rd; + + wire sda_pd; + wire sda_int; + + wire clk = sys_clk; + wire reset_n = ~sys_rst; + + // Coretest connections. + wire coretest_reset_n; + wire coretest_cs; + wire coretest_we; + wire [15 : 0] coretest_address; + wire [31 : 0] coretest_write_data; + wire [31 : 0] coretest_read_data; + + // I2C connections + wire [6:0] i2c_device_addr; + wire i2c_rxd_syn; + wire [7 : 0] i2c_rxd_data; + wire i2c_rxd_ack; + wire i2c_txd_syn; + wire [7 : 0] i2c_txd_data; + wire i2c_txd_ack; + + IOBUF #(.DRIVE(8), .SLEW("SLOW")) + IOBUF_sda ( + .IO(i2c_sda), + .I(1'b0), + .T(!sda_pd), + .O(sda_int) + ); + + i2c_core i2c_core + ( + .clk(clk), + .reset(sys_rst), + + // External data interface + .SCL(i2c_scl), + .SDA(sda_int), + .SDA_pd(sda_pd), + .i2c_device_addr(i2c_device_addr), + + // Internal receive interface. + .rxd_syn(i2c_rxd_syn), + .rxd_data(i2c_rxd_data), + .rxd_ack(i2c_rxd_ack), + + // Internal transmit interface. + .txd_syn(i2c_txd_syn), + .txd_data(i2c_txd_data), + .txd_ack(i2c_txd_ack) + ); + + coretest coretest + ( + .clk(clk), + .reset_n(reset_n), + + .rx_syn(i2c_rxd_syn), + .rx_data(i2c_rxd_data), + .rx_ack(i2c_rxd_ack), + + .tx_syn(i2c_txd_syn), + .tx_data(i2c_txd_data), + .tx_ack(i2c_txd_ack), + + // Interface to the core being tested. + .core_reset_n(coretest_reset_n), + .core_cs(coretest_cs), + .core_we(coretest_we), + .core_address(coretest_address), + .core_write_data(coretest_write_data), + .core_read_data(coretest_read_data) + ); + + wire select = (i2c_device_addr == I2C_DEVICE_ADDR); + assign sys_eim_addr = { coretest_address[15:13], 1'b0, coretest_address[12:0] }; + assign sys_eim_wr = select & coretest_cs & coretest_we; + assign sys_eim_rd = select & coretest_cs & ~coretest_we; + + + //---------------------------------------------------------------- + // Core Selector + // + // This multiplexer is used to map different types of cores, such as + // hashes, RNGs and ciphers to different regions (segments) of memory. + //---------------------------------------------------------------- + core_selector cores + ( + .sys_clk(clk), + .sys_rst(sys_rst), + + .sys_eim_addr(sys_eim_addr), + .sys_eim_wr(sys_eim_wr), + .sys_eim_rd(sys_eim_rd), + + .sys_write_data(coretest_write_data), + .sys_read_data(coretest_read_data) + ); + + + //---------------------------------------------------------------- + // Cryptech Logic + // + // Logic specific to the Cryptech use of the Novena. + // Currently we just hard wire the LED outputs. + //---------------------------------------------------------------- + assign ct_led = {8{ct_noise}}; + + + //---------------------------------------------------------------- + // Novena Patch + // + // Patch logic to keep the Novena board happy. + // The apoptosis_pin pin must be kept low or the whole board + // (more exactly the CPU) will be reset after the FPGA has + // been configured. + //---------------------------------------------------------------- + assign apoptosis_pin = 1'b0; + + assign led_pin = 1'b1; + +endmodule + +//====================================================================== +// EOF novena_top.v +//====================================================================== -- cgit v1.2.3