From 02ca34c86ba35a6036be316f7e31d0216e3a67e0 Mon Sep 17 00:00:00 2001 From: Paul Selkirk Date: Fri, 17 Jul 2015 13:26:46 -0400 Subject: remove all non-essential files related to clkmgr_dcm --- common/rtl/ipcore/_xmsgs/cg.xmsgs | 27 --- common/rtl/ipcore/clkmgr_dcm.asy | 25 -- common/rtl/ipcore/clkmgr_dcm.gise | 31 --- common/rtl/ipcore/clkmgr_dcm.ncf | 60 ----- common/rtl/ipcore/clkmgr_dcm.sym | 24 -- common/rtl/ipcore/clkmgr_dcm.ucf | 59 ----- common/rtl/ipcore/clkmgr_dcm.veo | 79 ------ common/rtl/ipcore/clkmgr_dcm.xco | 269 --------------------- common/rtl/ipcore/clkmgr_dcm.xdc | 67 ----- common/rtl/ipcore/clkmgr_dcm.xise | 74 ------ .../rtl/ipcore/clkmgr_dcm/clk_wiz_v3_6_readme.txt | 184 -------------- .../ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_readme.txt | 184 -------------- .../ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_vinfo.html | 195 --------------- common/rtl/ipcore/clkmgr_dcm/doc/pg065_clk_wiz.pdf | Bin 42657 -> 0 bytes .../clkmgr_dcm/example_design/clkmgr_dcm_exdes.ucf | 60 ----- .../clkmgr_dcm/example_design/clkmgr_dcm_exdes.v | 164 ------------- .../clkmgr_dcm/example_design/clkmgr_dcm_exdes.xdc | 69 ------ .../rtl/ipcore/clkmgr_dcm/implement/implement.bat | 90 ------- .../rtl/ipcore/clkmgr_dcm/implement/implement.sh | 91 ------- .../ipcore/clkmgr_dcm/implement/planAhead_ise.bat | 58 ----- .../ipcore/clkmgr_dcm/implement/planAhead_ise.sh | 59 ----- .../ipcore/clkmgr_dcm/implement/planAhead_ise.tcl | 78 ------ .../ipcore/clkmgr_dcm/implement/planAhead_rdn.bat | 58 ----- .../ipcore/clkmgr_dcm/implement/planAhead_rdn.sh | 57 ----- .../ipcore/clkmgr_dcm/implement/planAhead_rdn.tcl | 69 ------ common/rtl/ipcore/clkmgr_dcm/implement/xst.prj | 2 - common/rtl/ipcore/clkmgr_dcm/implement/xst.scr | 9 - .../ipcore/clkmgr_dcm/simulation/clkmgr_dcm_tb.v | 145 ----------- .../clkmgr_dcm/simulation/functional/simcmds.tcl | 8 - .../simulation/functional/simulate_isim.bat | 59 ----- .../simulation/functional/simulate_isim.sh | 61 ----- .../simulation/functional/simulate_mti.bat | 61 ----- .../simulation/functional/simulate_mti.do | 65 ----- .../simulation/functional/simulate_mti.sh | 61 ----- .../simulation/functional/simulate_ncsim.sh | 62 ----- .../simulation/functional/simulate_vcs.sh | 72 ------ .../simulation/functional/ucli_commands.key | 5 - .../simulation/functional/vcs_session.tcl | 18 -- .../clkmgr_dcm/simulation/functional/wave.do | 60 ----- .../clkmgr_dcm/simulation/functional/wave.sv | 118 --------- .../clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v | 149 ------------ .../clkmgr_dcm/simulation/timing/sdf_cmd_file | 2 - .../clkmgr_dcm/simulation/timing/simcmds.tcl | 9 - .../clkmgr_dcm/simulation/timing/simulate_isim.sh | 62 ----- .../clkmgr_dcm/simulation/timing/simulate_mti.bat | 59 ----- .../clkmgr_dcm/simulation/timing/simulate_mti.do | 65 ----- .../clkmgr_dcm/simulation/timing/simulate_mti.sh | 61 ----- .../clkmgr_dcm/simulation/timing/simulate_ncsim.sh | 64 ----- .../clkmgr_dcm/simulation/timing/simulate_vcs.sh | 72 ------ .../clkmgr_dcm/simulation/timing/ucli_commands.key | 5 - .../clkmgr_dcm/simulation/timing/vcs_session.tcl | 1 - .../ipcore/clkmgr_dcm/simulation/timing/wave.do | 71 ------ common/rtl/ipcore/clkmgr_dcm_flist.txt | 54 ----- common/rtl/ipcore/clkmgr_dcm_xmdf.tcl | 140 ----------- common/rtl/ipcore/coregen.cgp | 9 - common/rtl/ipcore/create_clkmgr_dcm.tcl | 37 --- common/rtl/ipcore/edit_clkmgr_dcm.tcl | 37 --- 57 files changed, 3834 deletions(-) delete mode 100644 common/rtl/ipcore/_xmsgs/cg.xmsgs delete mode 100644 common/rtl/ipcore/clkmgr_dcm.asy delete mode 100644 common/rtl/ipcore/clkmgr_dcm.gise delete mode 100644 common/rtl/ipcore/clkmgr_dcm.ncf delete mode 100644 common/rtl/ipcore/clkmgr_dcm.sym delete mode 100644 common/rtl/ipcore/clkmgr_dcm.ucf delete mode 100644 common/rtl/ipcore/clkmgr_dcm.veo delete mode 100644 common/rtl/ipcore/clkmgr_dcm.xco delete mode 100644 common/rtl/ipcore/clkmgr_dcm.xdc delete mode 100644 common/rtl/ipcore/clkmgr_dcm.xise delete mode 100644 common/rtl/ipcore/clkmgr_dcm/clk_wiz_v3_6_readme.txt delete mode 100644 common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_readme.txt delete mode 100644 common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_vinfo.html delete mode 100644 common/rtl/ipcore/clkmgr_dcm/doc/pg065_clk_wiz.pdf delete mode 100644 common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.ucf delete mode 100644 common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.v delete mode 100644 common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.xdc delete mode 100644 common/rtl/ipcore/clkmgr_dcm/implement/implement.bat delete mode 100644 common/rtl/ipcore/clkmgr_dcm/implement/implement.sh delete mode 100644 common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.bat delete mode 100644 common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.sh delete mode 100644 common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.tcl delete mode 100644 common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.bat delete mode 100644 common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.sh delete mode 100644 common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.tcl delete mode 100644 common/rtl/ipcore/clkmgr_dcm/implement/xst.prj delete mode 100644 common/rtl/ipcore/clkmgr_dcm/implement/xst.scr delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/clkmgr_dcm_tb.v delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/simcmds.tcl delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.bat delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.sh delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.bat delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.do delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.sh delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_ncsim.sh delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_vcs.sh delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/ucli_commands.key delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/vcs_session.tcl delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.do delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/timing/wave.do delete mode 100644 common/rtl/ipcore/clkmgr_dcm_flist.txt delete mode 100644 common/rtl/ipcore/clkmgr_dcm_xmdf.tcl delete mode 100644 common/rtl/ipcore/coregen.cgp delete mode 100644 common/rtl/ipcore/create_clkmgr_dcm.tcl delete mode 100644 common/rtl/ipcore/edit_clkmgr_dcm.tcl (limited to 'common/rtl/ipcore') diff --git a/common/rtl/ipcore/_xmsgs/cg.xmsgs b/common/rtl/ipcore/_xmsgs/cg.xmsgs deleted file mode 100644 index 985e6e3..0000000 --- a/common/rtl/ipcore/_xmsgs/cg.xmsgs +++ /dev/null @@ -1,27 +0,0 @@ - - - -Generating IP... - - -A core named 'clkmgr_dcm' already exists in the project. Output products for this core may be overwritten. - - -A core named 'clkmgr_dcm' already exists in the project. Output products for this core may be overwritten. - - -Component clk_wiz_v3_6 does not have a valid model name for Verilog synthesis - - -Finished generation of ASY schematic symbol. - - -Finished FLIST file generation. - - - - diff --git a/common/rtl/ipcore/clkmgr_dcm.asy b/common/rtl/ipcore/clkmgr_dcm.asy deleted file mode 100644 index 016d02a..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.asy +++ /dev/null @@ -1,25 +0,0 @@ -Version 4 -SymbolType BLOCK -TEXT 32 32 LEFT 4 clkmgr_dcm -RECTANGLE Normal 32 32 576 1088 -LINE Normal 0 80 32 80 -PIN 0 80 LEFT 36 -PINATTR PinName clk_in1 -PINATTR Polarity IN -LINE Normal 0 432 32 432 -PIN 0 432 LEFT 36 -PINATTR PinName reset -PINATTR Polarity IN -LINE Normal 608 80 576 80 -PIN 608 80 RIGHT 36 -PINATTR PinName clk_out1 -PINATTR Polarity OUT -LINE Normal 608 880 576 880 -PIN 608 880 RIGHT 36 -PINATTR PinName input_clk_stopped -PINATTR Polarity OUT -LINE Normal 608 1008 576 1008 -PIN 608 1008 RIGHT 36 -PINATTR PinName clk_valid -PINATTR Polarity OUT - diff --git a/common/rtl/ipcore/clkmgr_dcm.gise b/common/rtl/ipcore/clkmgr_dcm.gise deleted file mode 100644 index ed6d0f7..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.gise +++ /dev/null @@ -1,31 +0,0 @@ - - - - - - - - - - - - - - - - - - - - 11.1 - - - - - - - - - - - diff --git a/common/rtl/ipcore/clkmgr_dcm.ncf b/common/rtl/ipcore/clkmgr_dcm.ncf deleted file mode 100644 index ef4e259..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.ncf +++ /dev/null @@ -1,60 +0,0 @@ -# file: clkmgr_dcm.ucf -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# Input clock periods. These duplicate the values entered for the -# input clocks. You can use these to time your system -#---------------------------------------------------------------- -NET "CLK_IN1" TNM_NET = "CLK_IN1"; -TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 20.0 ns HIGH 50% INPUT_JITTER 200.0ps; - - -# FALSE PATH constraints -PIN "RESET" TIG; - - diff --git a/common/rtl/ipcore/clkmgr_dcm.sym b/common/rtl/ipcore/clkmgr_dcm.sym deleted file mode 100644 index 7d178b8..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.sym +++ /dev/null @@ -1,24 +0,0 @@ - - - BLOCK - 2015-1-28T21:56:19 - - - - - - - clkmgr_dcm - - - - - - - - - - - - - diff --git a/common/rtl/ipcore/clkmgr_dcm.ucf b/common/rtl/ipcore/clkmgr_dcm.ucf deleted file mode 100644 index 658fdb4..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.ucf +++ /dev/null @@ -1,59 +0,0 @@ -# file: clkmgr_dcm.ucf -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# Input clock periods. These duplicate the values entered for the -# input clocks. You can use these to time your system -#---------------------------------------------------------------- -NET "CLK_IN1" TNM_NET = "CLK_IN1"; -TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 20.0 ns HIGH 50% INPUT_JITTER 200.0ps; - - -# FALSE PATH constraints -PIN "RESET" TIG; - diff --git a/common/rtl/ipcore/clkmgr_dcm.veo b/common/rtl/ipcore/clkmgr_dcm.veo deleted file mode 100644 index c4e1d31..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.veo +++ /dev/null @@ -1,79 +0,0 @@ -// -// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -// -// This file contains confidential and proprietary information -// of Xilinx, Inc. and is protected under U.S. and -// international copyright and other intellectual property -// laws. -// -// DISCLAIMER -// This disclaimer is not a license and does not grant any -// rights to the materials distributed herewith. Except as -// otherwise provided in a valid license issued to you by -// Xilinx, and to the maximum extent permitted by applicable -// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -// (2) Xilinx shall not be liable (whether in contract or tort, -// including negligence, or under any other theory of -// liability) for any loss or damage of any kind or nature -// related to, arising under or in connection with these -// materials, including for any direct, or any indirect, -// special, incidental, or consequential loss or damage -// (including loss of data, profits, goodwill, or any type of -// loss or damage suffered as a result of any action brought -// by a third party) even if such damage or loss was -// reasonably foreseeable or Xilinx had been advised of the -// possibility of the same. -// -// CRITICAL APPLICATIONS -// Xilinx products are not designed or intended to be fail- -// safe, or for use in any application requiring fail-safe -// performance, such as life-support or safety devices or -// systems, Class III medical devices, nuclear facilities, -// applications related to the deployment of airbags, or any -// other applications that could lead to death, personal -// injury, or severe property or environmental damage -// (individually and collectively, "Critical -// Applications"). Customer assumes the sole risk and -// liability of any use of Xilinx products in Critical -// Applications, subject only to applicable laws and -// regulations governing limitations on product liability. -// -// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -// PART OF THIS FILE AT ALL TIMES. -// -//---------------------------------------------------------------------------- -// User entered comments -//---------------------------------------------------------------------------- -// None -// -//---------------------------------------------------------------------------- -// "Output Output Phase Duty Pk-to-Pk Phase" -// "Clock Freq (MHz) (degrees) Cycle (%) Jitter (ps) Error (ps)" -//---------------------------------------------------------------------------- -// CLK_OUT1____50.000______0.000______50.0______200.000____150.000 -// -//---------------------------------------------------------------------------- -// "Input Clock Freq (MHz) Input Jitter (UI)" -//---------------------------------------------------------------------------- -// __primary______________50____________0.010 - -// The following must be inserted into your Verilog file for this -// core to be instantiated. Change the instance name and port connections -// (in parentheses) to your own signal names. - -//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG - - clkmgr_dcm instance_name - (// Clock in ports - .CLK_IN1(CLK_IN1), // IN - // Clock out ports - .CLK_OUT1(CLK_OUT1), // OUT - // Status and control signals - .RESET(RESET),// IN - .INPUT_CLK_STOPPED(INPUT_CLK_STOPPED), // OUT - .CLK_VALID(CLK_VALID)); // OUT -// INST_TAG_END ------ End INSTANTIATION Template --------- diff --git a/common/rtl/ipcore/clkmgr_dcm.xco b/common/rtl/ipcore/clkmgr_dcm.xco deleted file mode 100644 index 37f1a1d..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.xco +++ /dev/null @@ -1,269 +0,0 @@ -############################################################## -# -# Xilinx Core Generator version 14.7 -# Date: Sun Feb 01 07:49:40 2015 -# -############################################################## -# -# This file contains the customisation parameters for a -# Xilinx CORE Generator IP GUI. It is strongly recommended -# that you do not manually alter this file as it may cause -# unexpected and unsupported behavior. -# -############################################################## -# -# Generated from component: xilinx.com:ip:clk_wiz:3.6 -# -############################################################## -# -# BEGIN Project Options -SET addpads = false -SET asysymbol = true -SET busformat = BusFormatAngleBracketNotRipped -SET createndf = false -SET designentry = Verilog -SET device = xc6slx45 -SET devicefamily = spartan6 -SET flowvendor = Other -SET formalverification = false -SET foundationsym = false -SET implementationfiletype = Ngc -SET package = csg324 -SET removerpms = false -SET simulationfiles = Behavioral -SET speedgrade = -3 -SET verilogsim = true -SET vhdlsim = false -# END Project Options -# BEGIN Select -SELECT Clocking_Wizard xilinx.com:ip:clk_wiz:3.6 -# END Select -# BEGIN Parameters -CSET calc_done=DONE -CSET clk_in_sel_port=CLK_IN_SEL -CSET clk_out1_port=CLK_OUT1 -CSET clk_out1_use_fine_ps_gui=false -CSET clk_out2_port=CLK_OUT2 -CSET clk_out2_use_fine_ps_gui=false -CSET clk_out3_port=CLK_OUT3 -CSET clk_out3_use_fine_ps_gui=false -CSET clk_out4_port=CLK_OUT4 -CSET clk_out4_use_fine_ps_gui=false -CSET clk_out5_port=CLK_OUT5 -CSET clk_out5_use_fine_ps_gui=false -CSET clk_out6_port=CLK_OUT6 -CSET clk_out6_use_fine_ps_gui=false -CSET clk_out7_port=CLK_OUT7 -CSET clk_out7_use_fine_ps_gui=false -CSET clk_valid_port=CLK_VALID -CSET clkfb_in_n_port=CLKFB_IN_N -CSET clkfb_in_p_port=CLKFB_IN_P -CSET clkfb_in_port=CLKFB_IN -CSET clkfb_in_signaling=SINGLE -CSET clkfb_out_n_port=CLKFB_OUT_N -CSET clkfb_out_p_port=CLKFB_OUT_P -CSET clkfb_out_port=CLKFB_OUT -CSET clkfb_stopped_port=CLKFB_STOPPED -CSET clkin1_jitter_ps=200.0 -CSET clkin1_ui_jitter=0.010 -CSET clkin2_jitter_ps=100.0 -CSET clkin2_ui_jitter=0.010 -CSET clkout1_drives=BUFG -CSET clkout1_requested_duty_cycle=50.0 -CSET clkout1_requested_out_freq=50 -CSET clkout1_requested_phase=0.000 -CSET clkout2_drives=BUFG -CSET clkout2_requested_duty_cycle=50.0 -CSET clkout2_requested_out_freq=50 -CSET clkout2_requested_phase=0 -CSET clkout2_used=false -CSET clkout3_drives=BUFG -CSET clkout3_requested_duty_cycle=50.0 -CSET clkout3_requested_out_freq=100.000 -CSET clkout3_requested_phase=0.000 -CSET clkout3_used=false -CSET clkout4_drives=BUFG -CSET clkout4_requested_duty_cycle=50.0 -CSET clkout4_requested_out_freq=100.000 -CSET clkout4_requested_phase=0.000 -CSET clkout4_used=false -CSET clkout5_drives=BUFG -CSET clkout5_requested_duty_cycle=50.0 -CSET clkout5_requested_out_freq=100.000 -CSET clkout5_requested_phase=0.000 -CSET clkout5_used=false -CSET clkout6_drives=BUFG -CSET clkout6_requested_duty_cycle=50.0 -CSET clkout6_requested_out_freq=100.000 -CSET clkout6_requested_phase=0.000 -CSET clkout6_used=false -CSET clkout7_drives=BUFG -CSET clkout7_requested_duty_cycle=50.0 -CSET clkout7_requested_out_freq=100.000 -CSET clkout7_requested_phase=0.000 -CSET clkout7_used=false -CSET clock_mgr_type=MANUAL -CSET component_name=clkmgr_dcm -CSET daddr_port=DADDR -CSET dclk_port=DCLK -CSET dcm_clk_feedback=1X -CSET dcm_clk_out1_port=CLK0 -CSET dcm_clk_out2_port=CLK0 -CSET dcm_clk_out3_port=CLK0 -CSET dcm_clk_out4_port=CLK0 -CSET dcm_clk_out5_port=CLK0 -CSET dcm_clk_out6_port=CLK0 -CSET dcm_clkdv_divide=2.0 -CSET dcm_clkfx_divide=1 -CSET dcm_clkfx_multiply=4 -CSET dcm_clkgen_clk_out1_port=CLKFX -CSET dcm_clkgen_clk_out2_port=CLKFX -CSET dcm_clkgen_clk_out3_port=CLKFX -CSET dcm_clkgen_clkfx_divide=1 -CSET dcm_clkgen_clkfx_md_max=0.000 -CSET dcm_clkgen_clkfx_multiply=4 -CSET dcm_clkgen_clkfxdv_divide=2 -CSET dcm_clkgen_clkin_period=10.000 -CSET dcm_clkgen_notes=None -CSET dcm_clkgen_spread_spectrum=NONE -CSET dcm_clkgen_startup_wait=false -CSET dcm_clkin_divide_by_2=false -CSET dcm_clkin_period=20.000 -CSET dcm_clkout_phase_shift=NONE -CSET dcm_deskew_adjust=SYSTEM_SYNCHRONOUS -CSET dcm_notes=None -CSET dcm_phase_shift=0 -CSET dcm_pll_cascade=NONE -CSET dcm_startup_wait=false -CSET den_port=DEN -CSET din_port=DIN -CSET dout_port=DOUT -CSET drdy_port=DRDY -CSET dwe_port=DWE -CSET feedback_source=FDBK_AUTO -CSET in_freq_units=Units_MHz -CSET in_jitter_units=Units_UI -CSET input_clk_stopped_port=INPUT_CLK_STOPPED -CSET jitter_options=UI -CSET jitter_sel=No_Jitter -CSET locked_port=LOCKED -CSET mmcm_bandwidth=OPTIMIZED -CSET mmcm_clkfbout_mult_f=4.000 -CSET mmcm_clkfbout_phase=0.000 -CSET mmcm_clkfbout_use_fine_ps=false -CSET mmcm_clkin1_period=10.000 -CSET mmcm_clkin2_period=10.000 -CSET mmcm_clkout0_divide_f=4.000 -CSET mmcm_clkout0_duty_cycle=0.500 -CSET mmcm_clkout0_phase=0.000 -CSET mmcm_clkout0_use_fine_ps=false -CSET mmcm_clkout1_divide=1 -CSET mmcm_clkout1_duty_cycle=0.500 -CSET mmcm_clkout1_phase=0.000 -CSET mmcm_clkout1_use_fine_ps=false -CSET mmcm_clkout2_divide=1 -CSET mmcm_clkout2_duty_cycle=0.500 -CSET mmcm_clkout2_phase=0.000 -CSET mmcm_clkout2_use_fine_ps=false -CSET mmcm_clkout3_divide=1 -CSET mmcm_clkout3_duty_cycle=0.500 -CSET mmcm_clkout3_phase=0.000 -CSET mmcm_clkout3_use_fine_ps=false -CSET mmcm_clkout4_cascade=false -CSET mmcm_clkout4_divide=1 -CSET mmcm_clkout4_duty_cycle=0.500 -CSET mmcm_clkout4_phase=0.000 -CSET mmcm_clkout4_use_fine_ps=false -CSET mmcm_clkout5_divide=1 -CSET mmcm_clkout5_duty_cycle=0.500 -CSET mmcm_clkout5_phase=0.000 -CSET mmcm_clkout5_use_fine_ps=false -CSET mmcm_clkout6_divide=1 -CSET mmcm_clkout6_duty_cycle=0.500 -CSET mmcm_clkout6_phase=0.000 -CSET mmcm_clkout6_use_fine_ps=false -CSET mmcm_clock_hold=false -CSET mmcm_compensation=ZHOLD -CSET mmcm_divclk_divide=1 -CSET mmcm_notes=None -CSET mmcm_ref_jitter1=0.010 -CSET mmcm_ref_jitter2=0.010 -CSET mmcm_startup_wait=false -CSET num_out_clks=1 -CSET override_dcm=false -CSET override_dcm_clkgen=false -CSET override_mmcm=false -CSET override_pll=false -CSET platform=nt -CSET pll_bandwidth=OPTIMIZED -CSET pll_clk_feedback=CLKFBOUT -CSET pll_clkfbout_mult=8 -CSET pll_clkfbout_phase=0.000 -CSET pll_clkin_period=20.0 -CSET pll_clkout0_divide=2 -CSET pll_clkout0_duty_cycle=0.500 -CSET pll_clkout0_phase=0.000 -CSET pll_clkout1_divide=10 -CSET pll_clkout1_duty_cycle=0.500 -CSET pll_clkout1_phase=0.000 -CSET pll_clkout2_divide=1 -CSET pll_clkout2_duty_cycle=0.500 -CSET pll_clkout2_phase=0.000 -CSET pll_clkout3_divide=1 -CSET pll_clkout3_duty_cycle=0.500 -CSET pll_clkout3_phase=0.000 -CSET pll_clkout4_divide=1 -CSET pll_clkout4_duty_cycle=0.500 -CSET pll_clkout4_phase=0.000 -CSET pll_clkout5_divide=1 -CSET pll_clkout5_duty_cycle=0.500 -CSET pll_clkout5_phase=0.000 -CSET pll_compensation=SYSTEM_SYNCHRONOUS -CSET pll_divclk_divide=1 -CSET pll_notes=None -CSET pll_ref_jitter=0.010 -CSET power_down_port=POWER_DOWN -CSET prim_in_freq=50 -CSET prim_in_jitter=0.010 -CSET prim_source=No_buffer -CSET primary_port=CLK_IN1 -CSET primitive=MMCM -CSET primtype_sel=DCM_SP -CSET psclk_port=PSCLK -CSET psdone_port=PSDONE -CSET psen_port=PSEN -CSET psincdec_port=PSINCDEC -CSET relative_inclk=REL_PRIMARY -CSET reset_port=RESET -CSET secondary_in_freq=100.000 -CSET secondary_in_jitter=0.010 -CSET secondary_port=CLK_IN2 -CSET secondary_source=Single_ended_clock_capable_pin -CSET ss_mod_freq=250 -CSET ss_mode=CENTER_HIGH -CSET status_port=STATUS -CSET summary_strings=empty -CSET use_clk_valid=true -CSET use_clkfb_stopped=false -CSET use_dyn_phase_shift=false -CSET use_dyn_reconfig=false -CSET use_freeze=false -CSET use_freq_synth=true -CSET use_inclk_stopped=true -CSET use_inclk_switchover=false -CSET use_locked=false -CSET use_max_i_jitter=false -CSET use_min_o_jitter=false -CSET use_min_power=false -CSET use_phase_alignment=true -CSET use_power_down=false -CSET use_reset=true -CSET use_spread_spectrum=false -CSET use_spread_spectrum_1=false -CSET use_status=false -# END Parameters -# BEGIN Extra information -MISC pkg_timestamp=2012-05-10T12:44:55Z -# END Extra information -GENERATE -# CRC: d6857c2d diff --git a/common/rtl/ipcore/clkmgr_dcm.xdc b/common/rtl/ipcore/clkmgr_dcm.xdc deleted file mode 100644 index 9ecc102..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.xdc +++ /dev/null @@ -1,67 +0,0 @@ -# file: clkmgr_dcm.xdc -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# Input clock periods. These duplicate the values entered for the -# input clocks. You can use these to time your system -#---------------------------------------------------------------- -create_clock -name CLK_IN1 -period 20.0 [get_ports CLK_IN1] -set_propagated_clock CLK_IN1 -set_input_jitter CLK_IN1 0.2 - -set_false_path -from [get_ports "RESET"] - -# Derived clock periods. These are commented out because they are -# automatically propogated by the tools -# However, if you'd like to use them for module level testing, you -# can copy them into your module level timing checks -#----------------------------------------------------------------- - -#----------------------------------------------------------------- - -#----------------------------------------------------------------- diff --git a/common/rtl/ipcore/clkmgr_dcm.xise b/common/rtl/ipcore/clkmgr_dcm.xise deleted file mode 100644 index 7369d3b..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.xise +++ /dev/null @@ -1,74 +0,0 @@ - - - -
- - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/common/rtl/ipcore/clkmgr_dcm/clk_wiz_v3_6_readme.txt b/common/rtl/ipcore/clkmgr_dcm/clk_wiz_v3_6_readme.txt deleted file mode 100644 index 91dcdd0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/clk_wiz_v3_6_readme.txt +++ /dev/null @@ -1,184 +0,0 @@ -CHANGE LOG for LogiCORE Clocking Wizard V3.6 - - Release Date: June 19, 2013 --------------------------------------------------------------------------------- - -Table of Contents - -1. INTRODUCTION -2. DEVICE SUPPORT -3. NEW FEATURE HISTORY -4. RESOLVED ISSUES -5. KNOWN ISSUES & LIMITATIONS -6. TECHNICAL SUPPORT & FEEDBACK -7. CORE RELEASE HISTORY -8. LEGAL DISCLAIMER - --------------------------------------------------------------------------------- - - -1. INTRODUCTION - -For installation instructions for this release, please go to: - - http://www.xilinx.com/ipcenter/coregen/ip_update_install_instructions.htm - -For system requirements: - - http://www.xilinx.com/ipcenter/coregen/ip_update_system_requirements.htm - -This file contains release notes for the Xilinx LogiCORE IP Clocking Wizard v3.6 -solution. For the latest core updates, see the product page at: - - http://www.xilinx.com/products/design_resources/conn_central/solution_kits/wizards/ - -................................................................................ - -2. DEVICE SUPPORT - - - 2.1 ISE - - - The following device families are supported by the core for this release. - - All 7 Series devices - - - Zynq-7000 devices - Zynq-7000 - Defense Grade Zynq-7000Q (XQ) - - - All Virtex-6 devices - - - All Spartan-6 devices - - -................................................................................ - -3. NEW FEATURE HISTORY - - - 3.1 ISE - - - Spread Spectrum support for 7 series MMCME2 - - - ISE 14.2 software support - -................................................................................ - -4. RESOLVED ISSUES - - - 4.1 ISE - - Resolved issue with example design becoming core top in planAhead - - Resolved issue with Virtex6 MMCM instantiation for VHDL project - Please refer to AR 50719 - http://www.xilinx.com/support/answers/50719.htm - -................................................................................ - -5. KNOWN ISSUES & LIMITATIONS - - - 5.1 ISE - - - The most recent information, including known issues, workarounds, and - resolutions for this version is provided in the IP Release Notes Guide - located at - - www.xilinx.com/support/documentation/user_guides/xtp025.pdf - - -................................................................................ - -6. TECHNICAL SUPPORT & FEEDBACK - - -To obtain technical support, create a WebCase at www.xilinx.com/support. -Questions are routed to a team with expertise using this product. - -Xilinx provides technical support for use of this product when used -according to the guidelines described in the core documentation, and -cannot guarantee timing, functionality, or support of this product for -designs that do not follow specified guidelines. - - -................................................................................ - -7. CORE RELEASE HISTORY - - -Date By Version Description -================================================================================ -06/19/2013 Xilinx, Inc. 3.6(Rev3) ISE 14.6 support -10/16/2012 Xilinx, Inc. 3.6(Rev2) ISE 14.3 support -07/25/2012 Xilinx, Inc. 3.6 ISE 14.2 support -04/24/2012 Xilinx, Inc. 3.5 ISE 14.1 support -01/18/2012 Xilinx, Inc. 3.3 ISE 13.4 support -06/22/2011 Xilinx, Inc. 3.2 ISE 13.2 support -03/01/2011 Xilinx, Inc. 3.1 ISE 13.1 support -12/14/2010 Xilinx, Inc. 1.8 ISE 12.4 support -09/21/2010 Xilinx, Inc. 1.7 ISE 12.3 support -07/23/2010 Xilinx, Inc. 1.6 ISE 12.2 support -04/19/2010 Xilinx, Inc. 1.5 ISE 12.1 support -12/02/2009 Xilinx, Inc. 1.4 ISE 11.4 support -09/16/2009 Xilinx, Inc. 1.3 ISE 11.3 support -06/24/2009 Xilinx, Inc. 1.2 ISE 11.2 support -04/24/2009 Xilinx, Inc. 1.1 Initial release; 11.1 support -================================================================================ - -................................................................................ - -8. LEGAL DISCLAIMER - -(c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved. - -This file contains confidential and proprietary information -of Xilinx, Inc. and is protected under U.S. and -international copyright and other intellectual property -laws. - -DISCLAIMER -This disclaimer is not a license and does not grant any -rights to the materials distributed herewith. Except as -otherwise provided in a valid license issued to you by -Xilinx, and to the maximum extent permitted by applicable -law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -(2) Xilinx shall not be liable (whether in contract or tort, -including negligence, or under any other theory of -liability) for any loss or damage of any kind or nature -related to, arising under or in connection with these -materials, including for any direct, or any indirect, -special, incidental, or consequential loss or damage -(including loss of data, profits, goodwill, or any type of -loss or damage suffered as a result of any action brought -by a third party) even if such damage or loss was -reasonably foreseeable or Xilinx had been advised of the -possibility of the same. - -CRITICAL APPLICATIONS -Xilinx products are not designed or intended to be fail- -safe, or for use in any application requiring fail-safe -performance, such as life-support or safety devices or -systems, Class III medical devices, nuclear facilities, -applications related to the deployment of airbags, or any -other applications that could lead to death, personal -injury, or severe property or environmental damage -(individually and collectively, "Critical -Applications"). Customer assumes the sole risk and -liability of any use of Xilinx products in Critical -Applications, subject only to applicable laws and -regulations governing limitations on product liability. - -THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -PART OF THIS FILE AT ALL TIMES. - diff --git a/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_readme.txt b/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_readme.txt deleted file mode 100644 index 91dcdd0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_readme.txt +++ /dev/null @@ -1,184 +0,0 @@ -CHANGE LOG for LogiCORE Clocking Wizard V3.6 - - Release Date: June 19, 2013 --------------------------------------------------------------------------------- - -Table of Contents - -1. INTRODUCTION -2. DEVICE SUPPORT -3. NEW FEATURE HISTORY -4. RESOLVED ISSUES -5. KNOWN ISSUES & LIMITATIONS -6. TECHNICAL SUPPORT & FEEDBACK -7. CORE RELEASE HISTORY -8. LEGAL DISCLAIMER - --------------------------------------------------------------------------------- - - -1. INTRODUCTION - -For installation instructions for this release, please go to: - - http://www.xilinx.com/ipcenter/coregen/ip_update_install_instructions.htm - -For system requirements: - - http://www.xilinx.com/ipcenter/coregen/ip_update_system_requirements.htm - -This file contains release notes for the Xilinx LogiCORE IP Clocking Wizard v3.6 -solution. For the latest core updates, see the product page at: - - http://www.xilinx.com/products/design_resources/conn_central/solution_kits/wizards/ - -................................................................................ - -2. DEVICE SUPPORT - - - 2.1 ISE - - - The following device families are supported by the core for this release. - - All 7 Series devices - - - Zynq-7000 devices - Zynq-7000 - Defense Grade Zynq-7000Q (XQ) - - - All Virtex-6 devices - - - All Spartan-6 devices - - -................................................................................ - -3. NEW FEATURE HISTORY - - - 3.1 ISE - - - Spread Spectrum support for 7 series MMCME2 - - - ISE 14.2 software support - -................................................................................ - -4. RESOLVED ISSUES - - - 4.1 ISE - - Resolved issue with example design becoming core top in planAhead - - Resolved issue with Virtex6 MMCM instantiation for VHDL project - Please refer to AR 50719 - http://www.xilinx.com/support/answers/50719.htm - -................................................................................ - -5. KNOWN ISSUES & LIMITATIONS - - - 5.1 ISE - - - The most recent information, including known issues, workarounds, and - resolutions for this version is provided in the IP Release Notes Guide - located at - - www.xilinx.com/support/documentation/user_guides/xtp025.pdf - - -................................................................................ - -6. TECHNICAL SUPPORT & FEEDBACK - - -To obtain technical support, create a WebCase at www.xilinx.com/support. -Questions are routed to a team with expertise using this product. - -Xilinx provides technical support for use of this product when used -according to the guidelines described in the core documentation, and -cannot guarantee timing, functionality, or support of this product for -designs that do not follow specified guidelines. - - -................................................................................ - -7. CORE RELEASE HISTORY - - -Date By Version Description -================================================================================ -06/19/2013 Xilinx, Inc. 3.6(Rev3) ISE 14.6 support -10/16/2012 Xilinx, Inc. 3.6(Rev2) ISE 14.3 support -07/25/2012 Xilinx, Inc. 3.6 ISE 14.2 support -04/24/2012 Xilinx, Inc. 3.5 ISE 14.1 support -01/18/2012 Xilinx, Inc. 3.3 ISE 13.4 support -06/22/2011 Xilinx, Inc. 3.2 ISE 13.2 support -03/01/2011 Xilinx, Inc. 3.1 ISE 13.1 support -12/14/2010 Xilinx, Inc. 1.8 ISE 12.4 support -09/21/2010 Xilinx, Inc. 1.7 ISE 12.3 support -07/23/2010 Xilinx, Inc. 1.6 ISE 12.2 support -04/19/2010 Xilinx, Inc. 1.5 ISE 12.1 support -12/02/2009 Xilinx, Inc. 1.4 ISE 11.4 support -09/16/2009 Xilinx, Inc. 1.3 ISE 11.3 support -06/24/2009 Xilinx, Inc. 1.2 ISE 11.2 support -04/24/2009 Xilinx, Inc. 1.1 Initial release; 11.1 support -================================================================================ - -................................................................................ - -8. LEGAL DISCLAIMER - -(c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved. - -This file contains confidential and proprietary information -of Xilinx, Inc. and is protected under U.S. and -international copyright and other intellectual property -laws. - -DISCLAIMER -This disclaimer is not a license and does not grant any -rights to the materials distributed herewith. Except as -otherwise provided in a valid license issued to you by -Xilinx, and to the maximum extent permitted by applicable -law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -(2) Xilinx shall not be liable (whether in contract or tort, -including negligence, or under any other theory of -liability) for any loss or damage of any kind or nature -related to, arising under or in connection with these -materials, including for any direct, or any indirect, -special, incidental, or consequential loss or damage -(including loss of data, profits, goodwill, or any type of -loss or damage suffered as a result of any action brought -by a third party) even if such damage or loss was -reasonably foreseeable or Xilinx had been advised of the -possibility of the same. - -CRITICAL APPLICATIONS -Xilinx products are not designed or intended to be fail- -safe, or for use in any application requiring fail-safe -performance, such as life-support or safety devices or -systems, Class III medical devices, nuclear facilities, -applications related to the deployment of airbags, or any -other applications that could lead to death, personal -injury, or severe property or environmental damage -(individually and collectively, "Critical -Applications"). Customer assumes the sole risk and -liability of any use of Xilinx products in Critical -Applications, subject only to applicable laws and -regulations governing limitations on product liability. - -THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -PART OF THIS FILE AT ALL TIMES. - diff --git a/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_vinfo.html b/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_vinfo.html deleted file mode 100644 index d6deba0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_vinfo.html +++ /dev/null @@ -1,195 +0,0 @@ - - -clk_wiz_v3_6_vinfo - - - -

-CHANGE LOG for LogiCORE Clocking Wizard V3.6 
-
-                    Release Date: June 19, 2013
---------------------------------------------------------------------------------
-
-Table of Contents
-
-1. INTRODUCTION 
-2. DEVICE SUPPORT    
-3. NEW FEATURE HISTORY   
-4. RESOLVED ISSUES 
-5. KNOWN ISSUES & LIMITATIONS 
-6. TECHNICAL SUPPORT & FEEDBACK
-7. CORE RELEASE HISTORY 
-8. LEGAL DISCLAIMER 
-
---------------------------------------------------------------------------------
-
-
-1. INTRODUCTION
-
-For installation instructions for this release, please go to:
-
-  www.xilinx.com/ipcenter/coregen/ip_update_install_instructions.htm
-
-For system requirements:
-
-   www.xilinx.com/ipcenter/coregen/ip_update_system_requirements.htm
-
-This file contains release notes for the Xilinx LogiCORE IP Clocking Wizard v3.6
-solution. For the latest core updates, see the product page at:
-
-   www.xilinx.com/products/design_resources/conn_central/solution_kits/wizards/
-
-................................................................................
-
-2. DEVICE SUPPORT
-
-
-  2.1 ISE 
-   
-  
-  The following device families are supported by the core for this release.
-  
-  All 7 Series devices
-
-
-  Zynq-7000 devices
-    Zynq-7000
-    Defense Grade Zynq-7000Q (XQ)
-
-
-  All Virtex-6 devices
-  
-  
-  All Spartan-6 devices
-  
-  
-................................................................................
-
-3. NEW FEATURE HISTORY 
-
-
-  3.1 ISE 
-  
-    - Spread Spectrum support for 7 series MMCME2
-
-    - ISE 14.2 software support
-
-................................................................................
-
-4. RESOLVED ISSUES
-
-
-  4.1 ISE 
-  
-      Resolved issue with example design becoming core top in planAhead
-
-      Resolved issue with Virtex6 MMCM instantiation for VHDL project
-      Please refer to AR 50719 - www.xilinx.com/support/answers/50719.htm
-
-................................................................................
-
-5. KNOWN ISSUES & LIMITATIONS
-
-
-  5.1 ISE 
-  
-  
-  The most recent information, including known issues, workarounds, and
-  resolutions for this version is provided in the IP Release Notes Guide
-  located at
-
-   www.xilinx.com/support/documentation/user_guides/xtp025.pdf
-  
-  
-................................................................................
-
-6. TECHNICAL SUPPORT & FEEDBACK
-
-
-To obtain technical support, create a WebCase at www.xilinx.com/support.
-Questions are routed to a team with expertise using this product.
-
-Xilinx provides technical support for use of this product when used
-according to the guidelines described in the core documentation, and
-cannot guarantee timing, functionality, or support of this product for
-designs that do not follow specified guidelines.
-
-
-................................................................................
-
-7. CORE RELEASE HISTORY
-
-
-Date        By            Version      Description
-================================================================================
-06/19/2013  Xilinx, Inc.  3.6(Rev3)    ISE 14.6 support
-10/16/2012  Xilinx, Inc.  3.6(Rev2)    ISE 14.3 support
-07/25/2012  Xilinx, Inc.  3.6          ISE 14.2 support
-04/24/2012  Xilinx, Inc.  3.5          ISE 14.1 support
-01/18/2012  Xilinx, Inc.  3.3          ISE 13.4 support
-06/22/2011  Xilinx, Inc.  3.2          ISE 13.2 support
-03/01/2011  Xilinx, Inc.  3.1          ISE 13.1 support
-12/14/2010  Xilinx, Inc.  1.8          ISE 12.4 support
-09/21/2010  Xilinx, Inc.  1.7          ISE 12.3 support
-07/23/2010  Xilinx, Inc.  1.6          ISE 12.2 support
-04/19/2010  Xilinx, Inc.  1.5          ISE 12.1 support
-12/02/2009  Xilinx, Inc.  1.4          ISE 11.4 support
-09/16/2009  Xilinx, Inc.  1.3          ISE 11.3 support
-06/24/2009  Xilinx, Inc.  1.2          ISE 11.2 support
-04/24/2009  Xilinx, Inc.  1.1          Initial release; 11.1 support
-================================================================================
-                          
-................................................................................
-
-8. LEGAL DISCLAIMER
-
-(c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved.
-
-This file contains confidential and proprietary information
-of Xilinx, Inc. and is protected under U.S. and
-international copyright and other intellectual property
-laws.
-
-DISCLAIMER
-This disclaimer is not a license and does not grant any
-rights to the materials distributed herewith. Except as
-otherwise provided in a valid license issued to you by
-Xilinx, and to the maximum extent permitted by applicable
-law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-(2) Xilinx shall not be liable (whether in contract or tort,
-including negligence, or under any other theory of
-liability) for any loss or damage of any kind or nature
-related to, arising under or in connection with these
-materials, including for any direct, or any indirect,
-special, incidental, or consequential loss or damage
-(including loss of data, profits, goodwill, or any type of
-loss or damage suffered as a result of any action brought
-by a third party) even if such damage or loss was
-reasonably foreseeable or Xilinx had been advised of the
-possibility of the same.
-
-CRITICAL APPLICATIONS
-Xilinx products are not designed or intended to be fail-
-safe, or for use in any application requiring fail-safe
-performance, such as life-support or safety devices or
-systems, Class III medical devices, nuclear facilities,
-applications related to the deployment of airbags, or any
-other applications that could lead to death, personal
-injury, or severe property or environmental damage
-(individually and collectively, "Critical
-Applications"). Customer assumes the sole risk and
-liability of any use of Xilinx products in Critical
-Applications, subject only to applicable laws and
-regulations governing limitations on product liability.
-
-THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-PART OF THIS FILE AT ALL TIMES.
-
-
-
- - diff --git a/common/rtl/ipcore/clkmgr_dcm/doc/pg065_clk_wiz.pdf b/common/rtl/ipcore/clkmgr_dcm/doc/pg065_clk_wiz.pdf deleted file mode 100644 index a7daa60..0000000 Binary files a/common/rtl/ipcore/clkmgr_dcm/doc/pg065_clk_wiz.pdf and /dev/null differ diff --git a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.ucf b/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.ucf deleted file mode 100644 index dffb528..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.ucf +++ /dev/null @@ -1,60 +0,0 @@ -# file: clkmgr_dcm_exdes.ucf -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# Input clock periods. These duplicate the values entered for the -# input clocks. You can use these to time your system -#---------------------------------------------------------------- -NET "CLK_IN1" TNM_NET = "CLK_IN1"; -TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 20.0 ns HIGH 50% INPUT_JITTER 200.0ps; - - -# FALSE PATH constraints -PIN "COUNTER_RESET" TIG; -PIN "RESET" TIG; - diff --git a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.v b/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.v deleted file mode 100644 index 10627b3..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.v +++ /dev/null @@ -1,164 +0,0 @@ -// file: clkmgr_dcm_exdes.v -// -// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -// -// This file contains confidential and proprietary information -// of Xilinx, Inc. and is protected under U.S. and -// international copyright and other intellectual property -// laws. -// -// DISCLAIMER -// This disclaimer is not a license and does not grant any -// rights to the materials distributed herewith. Except as -// otherwise provided in a valid license issued to you by -// Xilinx, and to the maximum extent permitted by applicable -// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -// (2) Xilinx shall not be liable (whether in contract or tort, -// including negligence, or under any other theory of -// liability) for any loss or damage of any kind or nature -// related to, arising under or in connection with these -// materials, including for any direct, or any indirect, -// special, incidental, or consequential loss or damage -// (including loss of data, profits, goodwill, or any type of -// loss or damage suffered as a result of any action brought -// by a third party) even if such damage or loss was -// reasonably foreseeable or Xilinx had been advised of the -// possibility of the same. -// -// CRITICAL APPLICATIONS -// Xilinx products are not designed or intended to be fail- -// safe, or for use in any application requiring fail-safe -// performance, such as life-support or safety devices or -// systems, Class III medical devices, nuclear facilities, -// applications related to the deployment of airbags, or any -// other applications that could lead to death, personal -// injury, or severe property or environmental damage -// (individually and collectively, "Critical -// Applications"). Customer assumes the sole risk and -// liability of any use of Xilinx products in Critical -// Applications, subject only to applicable laws and -// regulations governing limitations on product liability. -// -// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -// PART OF THIS FILE AT ALL TIMES. -// - -//---------------------------------------------------------------------------- -// Clocking wizard example design -//---------------------------------------------------------------------------- -// This example design instantiates the created clocking network, where each -// output clock drives a counter. The high bit of each counter is ported. -//---------------------------------------------------------------------------- - -`timescale 1ps/1ps - -module clkmgr_dcm_exdes - #( - parameter TCQ = 100 - ) - (// Clock in ports - input CLK_IN1, - // Reset that only drives logic in example design - input COUNTER_RESET, - output [1:1] CLK_OUT, - // High bits of counters driven by clocks - output COUNT, - // Status and control signals - input RESET, - output INPUT_CLK_STOPPED, - output CLK_VALID - ); - - // Parameters for the counters - //------------------------------- - // Counter width - localparam C_W = 16; - // Create reset for the counters - wire reset_int = RESET || COUNTER_RESET; - - reg rst_sync; - reg rst_sync_int; - reg rst_sync_int1; - reg rst_sync_int2; - - - - // Declare the clocks and counter - wire clk_int; - wire clk_n; - wire clk; - reg [C_W-1:0] counter; - - // Insert BUFGs on all input clocks that don't already have them - //-------------------------------------------------------------- - BUFG clkin1_buf - (.O (clk_in1_buf), - .I (CLK_IN1)); - - // Instantiation of the clocking network - //-------------------------------------- - clkmgr_dcm clknetwork - (// Clock in ports - .CLK_IN1 (clk_in1_buf), - // Clock out ports - .CLK_OUT1 (clk_int), - // Status and control signals - .RESET (RESET), - .INPUT_CLK_STOPPED (INPUT_CLK_STOPPED), - .CLK_VALID (CLK_VALID)); - - assign clk_n = ~clk; - - ODDR2 clkout_oddr - (.Q (CLK_OUT[1]), - .C0 (clk), - .C1 (clk_n), - .CE (1'b1), - .D0 (1'b1), - .D1 (1'b0), - .R (1'b0), - .S (1'b0)); - - // Connect the output clocks to the design - //----------------------------------------- - assign clk = clk_int; - - - // Reset synchronizer - //----------------------------------- - always @(posedge reset_int or posedge clk) begin - if (reset_int) begin - rst_sync <= 1'b1; - rst_sync_int <= 1'b1; - rst_sync_int1 <= 1'b1; - rst_sync_int2 <= 1'b1; - end - else begin - rst_sync <= 1'b0; - rst_sync_int <= rst_sync; - rst_sync_int1 <= rst_sync_int; - rst_sync_int2 <= rst_sync_int1; - end - end - - - // Output clock sampling - //----------------------------------- - always @(posedge clk or posedge rst_sync_int2) begin - if (rst_sync_int2) begin - counter <= #TCQ { C_W { 1'b 0 } }; - end else begin - counter <= #TCQ counter + 1'b 1; - end - end - - // alias the high bit to the output - assign COUNT = counter[C_W-1]; - - - -endmodule diff --git a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.xdc b/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.xdc deleted file mode 100644 index 787023d..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.xdc +++ /dev/null @@ -1,69 +0,0 @@ -# file: clkmgr_dcm_exdes.xdc -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# Input clock periods. These duplicate the values entered for the -# input clocks. You can use these to time your system -#---------------------------------------------------------------- -create_clock -name CLK_IN1 -period 20.0 [get_ports CLK_IN1] -set_propagated_clock CLK_IN1 -set_input_jitter CLK_IN1 0.2 - -# FALSE PATH constraint added on COUNTER_RESET -set_false_path -from [get_ports "COUNTER_RESET"] -set_false_path -from [get_ports "RESET"] - -# Derived clock periods. These are commented out because they are -# automatically propogated by the tools -# However, if you'd like to use them for module level testing, you -# can copy them into your module level timing checks -#----------------------------------------------------------------- - -#----------------------------------------------------------------- - -#----------------------------------------------------------------- diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/implement.bat b/common/rtl/ipcore/clkmgr_dcm/implement/implement.bat deleted file mode 100644 index 3d313d5..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/implement.bat +++ /dev/null @@ -1,90 +0,0 @@ -REM file: implement.bat -REM -REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -REM -REM This file contains confidential and proprietary information -REM of Xilinx, Inc. and is protected under U.S. and -REM international copyright and other intellectual property -REM laws. -REM -REM DISCLAIMER -REM This disclaimer is not a license and does not grant any -REM rights to the materials distributed herewith. Except as -REM otherwise provided in a valid license issued to you by -REM Xilinx, and to the maximum extent permitted by applicable -REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -REM (2) Xilinx shall not be liable (whether in contract or tort, -REM including negligence, or under any other theory of -REM liability) for any loss or damage of any kind or nature -REM related to, arising under or in connection with these -REM materials, including for any direct, or any indirect, -REM special, incidental, or consequential loss or damage -REM (including loss of data, profits, goodwill, or any type of -REM loss or damage suffered as a result of any action brought -REM by a third party) even if such damage or loss was -REM reasonably foreseeable or Xilinx had been advised of the -REM possibility of the same. -REM -REM CRITICAL APPLICATIONS -REM Xilinx products are not designed or intended to be fail- -REM safe, or for use in any application requiring fail-safe -REM performance, such as life-support or safety devices or -REM systems, Class III medical devices, nuclear facilities, -REM applications related to the deployment of airbags, or any -REM other applications that could lead to death, personal -REM injury, or severe property or environmental damage -REM (individually and collectively, "Critical -REM Applications"). Customer assumes the sole risk and -REM liability of any use of Xilinx products in Critical -REM Applications, subject only to applicable laws and -REM regulations governing limitations on product liability. -REM -REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -REM PART OF THIS FILE AT ALL TIMES. -REM - -REM ----------------------------------------------------------------------------- -REM Script to synthesize and implement the RTL provided for the clocking wizard -REM ----------------------------------------------------------------------------- - -REM Clean up the results directory -rmdir /S /Q results -mkdir results - -REM Copy unisim_comp.v file to results directory -copy %XILINX%\verilog\src\iSE\unisim_comp.v .\results\ - -REM Synthesize the Verilog Wrapper Files -echo 'Synthesizing Clocking Wizard design with XST' -xst -ifn xst.scr -move clkmgr_dcm_exdes.ngc results\ - -REM Copy the constraints files generated by Coregen -echo 'Copying files from constraints directory to results directory' -copy ..\example_design\clkmgr_dcm_exdes.ucf results\ - -cd results - -echo 'Running ngdbuild' -ngdbuild -uc clkmgr_dcm_exdes.ucf clkmgr_dcm_exdes - -echo 'Running map' -map -timing -pr b clkmgr_dcm_exdes -o mapped.ncd - -echo 'Running par' -par -w mapped.ncd routed mapped.pcf - -echo 'Running trce' -trce -e 10 routed -o routed mapped.pcf - -echo 'Running design through bitgen' -bitgen -w routed - -echo 'Running netgen to create gate level model for the clocking wizard example design' -netgen -ofmt verilog -sim -sdf_anno false -tm clkmgr_dcm_exdes -w routed.ncd routed.v -cd .. - diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/implement.sh b/common/rtl/ipcore/clkmgr_dcm/implement/implement.sh deleted file mode 100644 index 2c64bee..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/implement.sh +++ /dev/null @@ -1,91 +0,0 @@ -#!/bin/sh -# file: implement.sh -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -#----------------------------------------------------------------------------- -# Script to synthesize and implement the RTL provided for the clocking wizard -#----------------------------------------------------------------------------- - -# Clean up the results directory -rm -rf results -mkdir results - -# Copy unisim_comp.v file to results directory -cp $XILINX/verilog/src/iSE/unisim_comp.v ./results/ - -# Synthesize the Verilog Wrapper Files -echo 'Synthesizing Clocking Wizard design with XST' -xst -ifn xst.scr -mv clkmgr_dcm_exdes.ngc results/ - -# Copy the constraints files generated by Coregen -echo 'Copying files from constraints directory to results directory' -cp ../example_design/clkmgr_dcm_exdes.ucf results/ - -cd results - -echo 'Running ngdbuild' -ngdbuild -uc clkmgr_dcm_exdes.ucf clkmgr_dcm_exdes - -echo 'Running map' -map -timing clkmgr_dcm_exdes -o mapped.ncd - -echo 'Running par' -par -w mapped.ncd routed mapped.pcf - -echo 'Running trce' -trce -e 10 routed -o routed mapped.pcf - -echo 'Running design through bitgen' -bitgen -w routed - -echo 'Running netgen to create gate level model for the clocking wizard example design' -netgen -ofmt verilog -sim -sdf_anno false -tm clkmgr_dcm_exdes -w routed.ncd routed.v - -cd .. diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.bat b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.bat deleted file mode 100644 index 9782028..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.bat +++ /dev/null @@ -1,58 +0,0 @@ -REM file: planAhead_ise.bat -REM -REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -REM -REM This file contains confidential and proprietary information -REM of Xilinx, Inc. and is protected under U.S. and -REM international copyright and other intellectual property -REM laws. -REM -REM DISCLAIMER -REM This disclaimer is not a license and does not grant any -REM rights to the materials distributed herewith. Except as -REM otherwise provided in a valid license issued to you by -REM Xilinx, and to the maximum extent permitted by applicable -REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -REM (2) Xilinx shall not be liable (whether in contract or tort, -REM including negligence, or under any other theory of -REM liability) for any loss or damage of any kind or nature -REM related to, arising under or in connection with these -REM materials, including for any direct, or any indirect, -REM special, incidental, or consequential loss or damage -REM (including loss of data, profits, goodwill, or any type of -REM loss or damage suffered as a result of any action brought -REM by a third party) even if such damage or loss was -REM reasonably foreseeable or Xilinx had been advised of the -REM possibility of the same. -REM -REM CRITICAL APPLICATIONS -REM Xilinx products are not designed or intended to be fail- -REM safe, or for use in any application requiring fail-safe -REM performance, such as life-support or safety devices or -REM systems, Class III medical devices, nuclear facilities, -REM applications related to the deployment of airbags, or any -REM other applications that could lead to death, personal -REM injury, or severe property or environmental damage -REM (individually and collectively, "Critical -REM Applications"). Customer assumes the sole risk and -REM liability of any use of Xilinx products in Critical -REM Applications, subject only to applicable laws and -REM regulations governing limitations on product liability. -REM -REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -REM PART OF THIS FILE AT ALL TIMES. -REM - -REM----------------------------------------------------------------------------- -REM Script to synthesize and implement the RTL provided for the clocking wizard -REM----------------------------------------------------------------------------- - -del \f results -mkdir results -cd results - -planAhead -mode batch -source ..\planAhead_ise.tcl diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.sh b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.sh deleted file mode 100644 index 7f436b6..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.sh +++ /dev/null @@ -1,59 +0,0 @@ -#!/bin/sh -# file: planAhead_ise.sh -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -#----------------------------------------------------------------------------- -# Script to synthesize and implement the RTL provided for the clocking wizard -#----------------------------------------------------------------------------- - -rm -rf results -mkdir results -cd results - -planAhead -mode batch -source ../planAhead_ise.tcl diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.tcl b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.tcl deleted file mode 100644 index ab77638..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.tcl +++ /dev/null @@ -1,78 +0,0 @@ -# file: planAhead_ise.tcl -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -set projDir [file dirname [info script]] -set projName clkmgr_dcm -set topName clkmgr_dcm_exdes -set device xc6slx45csg324-3 - -create_project $projName $projDir/results/$projName -part $device - -set_property design_mode RTL [get_filesets sources_1] - -## Source files -#set verilogSources [glob $srcDir/*.v] -import_files -fileset [get_filesets sources_1] -force -norecurse ../../example_design/clkmgr_dcm_exdes.v -import_files -fileset [get_filesets sources_1] -force -norecurse ../../../clkmgr_dcm.v - - -#UCF file -import_files -fileset [get_filesets constrs_1] -force -norecurse ../../example_design/clkmgr_dcm_exdes.ucf - -set_property top $topName [get_property srcset [current_run]] - -launch_runs -runs synth_1 -wait_on_run synth_1 - -set_property add_step Bitgen [get_runs impl_1] -launch_runs -runs impl_1 -wait_on_run impl_1 - - - diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.bat b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.bat deleted file mode 100644 index 3e1e03b..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.bat +++ /dev/null @@ -1,58 +0,0 @@ -REM file: planAhead_rdn.sh -REM -REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -REM -REM This file contains confidential and proprietary information -REM of Xilinx, Inc. and is protected under U.S. and -REM international copyright and other intellectual property -REM laws. -REM -REM DISCLAIMER -REM This disclaimer is not a license and does not grant any -REM rights to the materials distributed herewith. Except as -REM otherwise provided in a valid license issued to you by -REM Xilinx, and to the maximum extent permitted by applicable -REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -REM (2) Xilinx shall not be liable (whether in contract or tort, -REM including negligence, or under any other theory of -REM liability) for any loss or damage of any kind or nature -REM related to, arising under or in connection with these -REM materials, including for any direct, or any indirect, -REM special, incidental, or consequential loss or damage -REM (including loss of data, profits, goodwill, or any type of -REM loss or damage suffered as a result of any action brought -REM by a third party) even if such damage or loss was -REM reasonably foreseeable or Xilinx had been advised of the -REM possibility of the same. -REM -REM CRITICAL APPLICATIONS -REM Xilinx products are not designed or intended to be fail- -REM safe, or for use in any application requiring fail-safe -REM performance, such as life-support or safety devices or -REM systems, Class III medical devices, nuclear facilities, -REM applications related to the deployment of airbags, or any -REM other applications that could lead to death, personal -REM injury, or severe property or environmental damage -REM (individually and collectively, "Critical -REM Applications"). Customer assumes the sole risk and -REM liability of any use of Xilinx products in Critical -REM Applications, subject only to applicable laws and -REM regulations governing limitations on product liability. -REM -REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -REM PART OF THIS FILE AT ALL TIMES. -REM - -REM----------------------------------------------------------------------------- -REM Script to synthesize and implement the RTL provided for the XADC wizard -REM----------------------------------------------------------------------------- - -del \f results -mkdir results -cd results - -planAhead -mode batch -source ..\planAhead_rdn.tcl diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.sh b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.sh deleted file mode 100644 index a5adee8..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.sh +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/sh -# file: planAhead_rdn.sh -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -#----------------------------------------------------------------------------- -# Script to synthesize and implement the RTL provided for the XADC wizard -#----------------------------------------------------------------------------- -rm -rf results -mkdir results -cd results -planAhead -mode batch -source ../planAhead_rdn.tcl diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.tcl b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.tcl deleted file mode 100644 index e8c0fdf..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.tcl +++ /dev/null @@ -1,69 +0,0 @@ -# file : planAhead_rdn.tcl -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -set device xc6slx45csg324-3 -set projName clkmgr_dcm -set design clkmgr_dcm -set projDir [file dirname [info script]] -create_project $projName $projDir/results/$projName -part $device -force -set_property design_mode RTL [current_fileset -srcset] -set top_module clkmgr_dcm_exdes -set_property top clkmgr_dcm_exdes [get_property srcset [current_run]] -add_files -norecurse {../../../clkmgr_dcm.v} -add_files -norecurse {../../example_design/clkmgr_dcm_exdes.v} -import_files -fileset [get_filesets constrs_1 ] -force -norecurse {../../example_design/clkmgr_dcm_exdes.xdc} -synth_design -opt_design -place_design -route_design -write_sdf -rename_top_module clkmgr_dcm_exdes -file routed.sdf -write_verilog -nolib -mode timesim -sdf_anno false -rename_top_module clkmgr_dcm_exdes -file routed.v -report_timing -nworst 30 -path_type full -file routed.twr -report_drc -file report.drc -write_bitstream -bitgen_options {-g UnconstrainedPins:Allow} -file routed.bit diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/xst.prj b/common/rtl/ipcore/clkmgr_dcm/implement/xst.prj deleted file mode 100644 index cd0e0e6..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/xst.prj +++ /dev/null @@ -1,2 +0,0 @@ -verilog work ../../clkmgr_dcm.v -verilog work ../example_design/clkmgr_dcm_exdes.v diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/xst.scr b/common/rtl/ipcore/clkmgr_dcm/implement/xst.scr deleted file mode 100644 index 20d09f4..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/xst.scr +++ /dev/null @@ -1,9 +0,0 @@ -run --ifmt MIXED --top clkmgr_dcm_exdes --p xc6slx45-csg324-3 --ifn xst.prj --ofn clkmgr_dcm_exdes --keep_hierarchy soft --equivalent_register_removal no --max_fanout 65535 diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/clkmgr_dcm_tb.v b/common/rtl/ipcore/clkmgr_dcm/simulation/clkmgr_dcm_tb.v deleted file mode 100644 index ee24750..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/clkmgr_dcm_tb.v +++ /dev/null @@ -1,145 +0,0 @@ -// file: clkmgr_dcm_tb.v -// -// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -// -// This file contains confidential and proprietary information -// of Xilinx, Inc. and is protected under U.S. and -// international copyright and other intellectual property -// laws. -// -// DISCLAIMER -// This disclaimer is not a license and does not grant any -// rights to the materials distributed herewith. Except as -// otherwise provided in a valid license issued to you by -// Xilinx, and to the maximum extent permitted by applicable -// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -// (2) Xilinx shall not be liable (whether in contract or tort, -// including negligence, or under any other theory of -// liability) for any loss or damage of any kind or nature -// related to, arising under or in connection with these -// materials, including for any direct, or any indirect, -// special, incidental, or consequential loss or damage -// (including loss of data, profits, goodwill, or any type of -// loss or damage suffered as a result of any action brought -// by a third party) even if such damage or loss was -// reasonably foreseeable or Xilinx had been advised of the -// possibility of the same. -// -// CRITICAL APPLICATIONS -// Xilinx products are not designed or intended to be fail- -// safe, or for use in any application requiring fail-safe -// performance, such as life-support or safety devices or -// systems, Class III medical devices, nuclear facilities, -// applications related to the deployment of airbags, or any -// other applications that could lead to death, personal -// injury, or severe property or environmental damage -// (individually and collectively, "Critical -// Applications"). Customer assumes the sole risk and -// liability of any use of Xilinx products in Critical -// Applications, subject only to applicable laws and -// regulations governing limitations on product liability. -// -// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -// PART OF THIS FILE AT ALL TIMES. -// - -//---------------------------------------------------------------------------- -// Clocking wizard demonstration testbench -//---------------------------------------------------------------------------- -// This demonstration testbench instantiates the example design for the -// clocking wizard. Input clocks are toggled, which cause the clocking -// network to lock and the counters to increment. -//---------------------------------------------------------------------------- - -`timescale 1ps/1ps - -`define wait_lock @(posedge CLK_VALID) - -module clkmgr_dcm_tb (); - - // Clock to Q delay of 100ps - localparam TCQ = 100; - - - // timescale is 1ps/1ps - localparam ONE_NS = 1000; - localparam PHASE_ERR_MARGIN = 100; // 100ps - // how many cycles to run - localparam COUNT_PHASE = 1024; - // we'll be using the period in many locations - localparam time PER1 = 20.0*ONE_NS; - localparam time PER1_1 = PER1/2; - localparam time PER1_2 = PER1 - PER1/2; - - // Declare the input clock signals - reg CLK_IN1 = 1; - - // The high bit of the sampling counter - wire COUNT; - // Status and control signals - reg RESET = 0; - wire INPUT_CLK_STOPPED; - wire CLK_VALID; - reg COUNTER_RESET = 0; -wire [1:1] CLK_OUT; -//Freq Check using the M & D values setting and actual Frequency generated - - - // Input clock generation - //------------------------------------ - always begin - CLK_IN1 = #PER1_1 ~CLK_IN1; - CLK_IN1 = #PER1_2 ~CLK_IN1; - end - - // Test sequence - reg [15*8-1:0] test_phase = ""; - initial begin - // Set up any display statements using time to be readable - $timeformat(-12, 2, "ps", 10); - COUNTER_RESET = 0; - test_phase = "reset"; - RESET = 1; - #(PER1*6); - RESET = 0; - test_phase = "wait lock"; - `wait_lock; - #(PER1*6); - COUNTER_RESET = 1; - #(PER1*20) - COUNTER_RESET = 0; - - test_phase = "counting"; - #(PER1*COUNT_PHASE); - - $display("SIMULATION PASSED"); - $display("SYSTEM_CLOCK_COUNTER : %0d\n",$time/PER1); - $finish; - end - - // Instantiation of the example design containing the clock - // network and sampling counters - //--------------------------------------------------------- - clkmgr_dcm_exdes - #( - .TCQ (TCQ) - ) dut - (// Clock in ports - .CLK_IN1 (CLK_IN1), - // Reset for logic in example design - .COUNTER_RESET (COUNTER_RESET), - .CLK_OUT (CLK_OUT), - // High bits of the counters - .COUNT (COUNT), - // Status and control signals - .RESET (RESET), - .INPUT_CLK_STOPPED (INPUT_CLK_STOPPED), - .CLK_VALID (CLK_VALID)); - -// Freq Check - -endmodule diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simcmds.tcl b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simcmds.tcl deleted file mode 100644 index e19ead8..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simcmds.tcl +++ /dev/null @@ -1,8 +0,0 @@ -# file: simcmds.tcl - -# create the simulation script -vcd dumpfile isim.vcd -vcd dumpvars -m /clkmgr_dcm_tb -l 0 -wave add / -run 50000ns -quit diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.bat b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.bat deleted file mode 100644 index 80904cb..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.bat +++ /dev/null @@ -1,59 +0,0 @@ -REM file: simulate_isim.bat -REM -REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -REM -REM This file contains confidential and proprietary information -REM of Xilinx, Inc. and is protected under U.S. and -REM international copyright and other intellectual property -REM laws. -REM -REM DISCLAIMER -REM This disclaimer is not a license and does not grant any -REM rights to the materials distributed herewith. Except as -REM otherwise provided in a valid license issued to you by -REM Xilinx, and to the maximum extent permitted by applicable -REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -REM (2) Xilinx shall not be liable (whether in contract or tort, -REM including negligence, or under any other theory of -REM liability) for any loss or damage of any kind or nature -REM related to, arising under or in connection with these -REM materials, including for any direct, or any indirect, -REM special, incidental, or consequential loss or damage -REM (including loss of data, profits, goodwill, or any type of -REM loss or damage suffered as a result of any action brought -REM by a third party) even if such damage or loss was -REM reasonably foreseeable or Xilinx had been advised of the -REM possibility of the same. -REM -REM CRITICAL APPLICATIONS -REM Xilinx products are not designed or intended to be fail- -REM safe, or for use in any application requiring fail-safe -REM performance, such as life-support or safety devices or -REM systems, Class III medical devices, nuclear facilities, -REM applications related to the deployment of airbags, or any -REM other applications that could lead to death, personal -REM injury, or severe property or environmental damage -REM (individually and collectively, "Critical -REM Applications"). Customer assumes the sole risk and -REM liability of any use of Xilinx products in Critical -REM Applications, subject only to applicable laws and -REM regulations governing limitations on product liability. -REM -REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -REM PART OF THIS FILE AT ALL TIMES. -REM - -vlogcomp -work work %XILINX%\verilog\src\glbl.v -vlogcomp -work work ..\..\..\clkmgr_dcm.v -vlogcomp -work work ..\..\example_design\clkmgr_dcm_exdes.v -vlogcomp -work work ..\clkmgr_dcm_tb.v - -REM compile the project -fuse work.clkmgr_dcm_tb work.glbl -L unisims_ver -o clkmgr_dcm_isim.exe - -REM run the simulation script -.\clkmgr_dcm_isim.exe -gui -tclbatch simcmds.tcl diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.sh deleted file mode 100644 index 9fb5029..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.sh +++ /dev/null @@ -1,61 +0,0 @@ -# file: simulate_isim.sh -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# nt -# create the project -vlogcomp -work work ${XILINX}/verilog/src/glbl.v -vlogcomp -work work ../../../clkmgr_dcm.v -vlogcomp -work work ../../example_design/clkmgr_dcm_exdes.v -vlogcomp -work work ../clkmgr_dcm_tb.v - -# compile the project -fuse work.clkmgr_dcm_tb work.glbl -L unisims_ver -o clkmgr_dcm_isim.exe - -# run the simulation script -./clkmgr_dcm_isim.exe -gui -tclbatch simcmds.tcl diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.bat b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.bat deleted file mode 100644 index 7497cd9..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.bat +++ /dev/null @@ -1,61 +0,0 @@ -REM file: simulate_mti.bat -REM -REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -REM -REM This file contains confidential and proprietary information -REM of Xilinx, Inc. and is protected under U.S. and -REM international copyright and other intellectual property -REM laws. -REM -REM DISCLAIMER -REM This disclaimer is not a license and does not grant any -REM rights to the materials distributed herewith. Except as -REM otherwise provided in a valid license issued to you by -REM Xilinx, and to the maximum extent permitted by applicable -REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -REM (2) Xilinx shall not be liable (whether in contract or tort, -REM including negligence, or under any other theory of -REM liability) for any loss or damage of any kind or nature -REM related to, arising under or in connection with these -REM materials, including for any direct, or any indirect, -REM special, incidental, or consequential loss or damage -REM (including loss of data, profits, goodwill, or any type of -REM loss or damage suffered as a result of any action brought -REM by a third party) even if such damage or loss was -REM reasonably foreseeable or Xilinx had been advised of the -REM possibility of the same. -REM -REM CRITICAL APPLICATIONS -REM Xilinx products are not designed or intended to be fail- -REM safe, or for use in any application requiring fail-safe -REM performance, such as life-support or safety devices or -REM systems, Class III medical devices, nuclear facilities, -REM applications related to the deployment of airbags, or any -REM other applications that could lead to death, personal -REM injury, or severe property or environmental damage -REM (individually and collectively, "Critical -REM Applications"). Customer assumes the sole risk and -REM liability of any use of Xilinx products in Critical -REM Applications, subject only to applicable laws and -REM regulations governing limitations on product liability. -REM -REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -REM PART OF THIS FILE AT ALL TIMES. -REM - -REM set up the working directory -vlib work - -REM compile all of the files -vlog -work work %XILINX%\verilog\src\glbl.v -vlog -work work ..\..\..\clkmgr_dcm.v -vlog -work work ..\..\example_design\clkmgr_dcm_exdes.v -vlog -work work ..\clkmgr_dcm_tb.v - -REM run the simulation -vsim -c -t ps -voptargs="+acc" -L secureip -L unisims_ver work.clkmgr_dcm_tb work.glbl - diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.do b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.do deleted file mode 100644 index b0e526f..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.do +++ /dev/null @@ -1,65 +0,0 @@ -# file: simulate_mti.do -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# set up the working directory -set work work -vlib work - -# compile all of the files -vlog -work work $env(XILINX)/verilog/src/glbl.v -vlog -work work ../../../clkmgr_dcm.v -vlog -work work ../../example_design/clkmgr_dcm_exdes.v -vlog -work work ../clkmgr_dcm_tb.v - -# run the simulation -vsim -t ps -voptargs="+acc" -L unisims_ver work.clkmgr_dcm_tb work.glbl -do wave.do -log clkmgr_dcm_tb/dut/counter -log -r /* -run 50000ns diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.sh deleted file mode 100644 index 66099e0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.sh +++ /dev/null @@ -1,61 +0,0 @@ -#/bin/sh -# file: simulate_mti.sh -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# -# set up the working directory -set work work -vlib work - -# compile all of the files -vlog -work work $XILINX/verilog/src/glbl.v -vlog -work work ../../../clkmgr_dcm.v -vlog -work work ../../example_design/clkmgr_dcm_exdes.v -vlog -work work ../clkmgr_dcm_tb.v - -# run the simulation -vsim -c -t ps -voptargs="+acc" -L secureip -L unisims_ver work.clkmgr_dcm_tb work.glbl diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_ncsim.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_ncsim.sh deleted file mode 100644 index 01b0412..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_ncsim.sh +++ /dev/null @@ -1,62 +0,0 @@ -#/bin/sh -# file: simulate_ncsim.sh -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# set up the working directory -mkdir work - -# compile all of the files -ncvlog -work work ${XILINX}/verilog/src/glbl.v -ncvlog -work work ../../../clkmgr_dcm.v -ncvlog -work work ../../example_design/clkmgr_dcm_exdes.v -ncvlog -work work ../clkmgr_dcm_tb.v - -# elaborate and run the simulation -ncelab -work work -access +wc work.clkmgr_dcm_tb work.glbl -ncsim -input "@database -open -shm nc; probe -create -database nc -all -depth all; probe dut.counter; run 50000ns; exit" work.clkmgr_dcm_tb diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_vcs.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_vcs.sh deleted file mode 100644 index 39668df..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_vcs.sh +++ /dev/null @@ -1,72 +0,0 @@ -#!/bin/sh -# file: simulate_vcs.sh -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# remove old files -rm -rf simv* csrc DVEfiles AN.DB - -# compile all of the files -# Note that -sverilog is not strictly required- You can -# remove the -sverilog if you change the type of the -# localparam for the periods in the testbench file to -# [63:0] from time -vlogan -sverilog \ - ${XILINX}/verilog/src/glbl.v \ - ../../../clkmgr_dcm.v \ - ../../example_design/clkmgr_dcm_exdes.v \ - ../clkmgr_dcm_tb.v - -# prepare the simulation -vcs +vcs+lic+wait -debug clkmgr_dcm_tb glbl - -# run the simulation -./simv -ucli -i ucli_commands.key - -# launch the viewer -dve -vpd vcdplus.vpd -session vcs_session.tcl diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/ucli_commands.key b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/ucli_commands.key deleted file mode 100644 index 2bbdd0f..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/ucli_commands.key +++ /dev/null @@ -1,5 +0,0 @@ -call {$vcdpluson} -call {$vcdplusmemon(clkmgr_dcm_tb.dut.counter)} -run -call {$vcdplusclose} -quit diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/vcs_session.tcl b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/vcs_session.tcl deleted file mode 100644 index 628e55a..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/vcs_session.tcl +++ /dev/null @@ -1,18 +0,0 @@ -gui_open_window Wave -gui_sg_create clkmgr_dcm_group -gui_list_add_group -id Wave.1 {clkmgr_dcm_group} -gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.test_phase} -gui_set_radix -radix {ascii} -signals {clkmgr_dcm_tb.test_phase} -gui_sg_addsignal -group clkmgr_dcm_group {{Input_clocks}} -divider -gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.CLK_IN1} -gui_sg_addsignal -group clkmgr_dcm_group {{Output_clocks}} -divider -gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.dut.clk} -gui_list_expand -id Wave.1 clkmgr_dcm_tb.dut.clk -gui_sg_addsignal -group clkmgr_dcm_group {{Status_control}} -divider -gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.RESET} -gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.USE_INCLK_STOPPED} -gui_sg_addsignal -group clkmgr_dcm_group {{Counters}} -divider -gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.COUNT} -gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.dut.counter} -gui_list_expand -id Wave.1 clkmgr_dcm_tb.dut.counter -gui_zoom -window Wave.1 -full diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.do b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.do deleted file mode 100644 index eee7422..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.do +++ /dev/null @@ -1,60 +0,0 @@ -# file: wave.do -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -add wave -noupdate -format Literal -radix ascii /clkmgr_dcm_tb/test_phase -add wave -noupdate -divider {Input clocks} -add wave -noupdate -format Logic /clkmgr_dcm_tb/CLK_IN1 -add wave -noupdate -divider {Output clocks} -add wave -noupdate -format Logic /clkmgr_dcm_tb/dut/clk -add wave -noupdate -divider Status/control -add wave -noupdate -format Logic /clkmgr_dcm_tb/RESET -add wave -noupdate -format Logic /clkmgr_dcm_tb/INPUT_CLK_STOPPED -add wave -noupdate -divider Counters -add wave -noupdate -format Literal -radix hexadecimal /clkmgr_dcm_tb/COUNT -add wave -noupdate -format Literal -radix hexadecimal /clkmgr_dcm_tb/dut/counter diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv deleted file mode 100644 index c3c3eef..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv +++ /dev/null @@ -1,118 +0,0 @@ -# file: wave.sv -# -# (c) Copyright 2008 - 2010 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# -# Get the windows set up -# -if {[catch {window new WatchList -name "Design Browser 1" -geometry 1054x819+536+322}] != ""} { - window geometry "Design Browser 1" 1054x819+536+322 -} -window target "Design Browser 1" on -browser using {Design Browser 1} -browser set \ - -scope nc::clkmgr_dcm_tb -browser yview see nc::clkmgr_dcm_tb -browser timecontrol set -lock 0 - -if {[catch {window new WaveWindow -name "Waveform 1" -geometry 1010x600+0+541}] != ""} { - window geometry "Waveform 1" 1010x600+0+541 -} -window target "Waveform 1" on -waveform using {Waveform 1} -waveform sidebar visibility partial -waveform set \ - -primarycursor TimeA \ - -signalnames name \ - -signalwidth 175 \ - -units ns \ - -valuewidth 75 -cursor set -using TimeA -time 0 -waveform baseline set -time 0 -waveform xview limits 0 20000n - -# -# Define signal groups -# -catch {group new -name {Output clocks} -overlay 0} -catch {group new -name {Status/control} -overlay 0} -catch {group new -name {Counters} -overlay 0} - -set id [waveform add -signals [list {nc::clkmgr_dcm_tb.CLK_IN1}]] - -group using {Output clocks} -group set -overlay 0 -group set -comment {} -group clear 0 end - -group insert \ - {clkmgr_dcm_tb.dut.clk} \ - -group using {Counters} -group set -overlay 0 -group set -comment {} -group clear 0 end - -group insert \ - {clkmgr_dcm_tb.dut.counter} \ - -group using {Status/control} -group set -overlay 0 -group set -comment {} -group clear 0 end - -group insert \ - {nc::clkmgr_dcm_tb.RESET} {nc::clkmgr_dcm_tb.INPUT_CLK_STOPPED} - -set id [waveform add -signals [list {nc::clkmgr_dcm_tb.COUNT} ]] - -set id [waveform add -signals [list {nc::clkmgr_dcm_tb.test_phase} ]] -waveform format $id -radix %a - -set groupId [waveform add -groups {{Input clocks}}] -set groupId [waveform add -groups {{Output clocks}}] -set groupId [waveform add -groups {{Status/control}}] -set groupId [waveform add -groups {{Counters}}] diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v deleted file mode 100644 index 9618253..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v +++ /dev/null @@ -1,149 +0,0 @@ -// file: clkmgr_dcm_tb.v -// -// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -// -// This file contains confidential and proprietary information -// of Xilinx, Inc. and is protected under U.S. and -// international copyright and other intellectual property -// laws. -// -// DISCLAIMER -// This disclaimer is not a license and does not grant any -// rights to the materials distributed herewith. Except as -// otherwise provided in a valid license issued to you by -// Xilinx, and to the maximum extent permitted by applicable -// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -// (2) Xilinx shall not be liable (whether in contract or tort, -// including negligence, or under any other theory of -// liability) for any loss or damage of any kind or nature -// related to, arising under or in connection with these -// materials, including for any direct, or any indirect, -// special, incidental, or consequential loss or damage -// (including loss of data, profits, goodwill, or any type of -// loss or damage suffered as a result of any action brought -// by a third party) even if such damage or loss was -// reasonably foreseeable or Xilinx had been advised of the -// possibility of the same. -// -// CRITICAL APPLICATIONS -// Xilinx products are not designed or intended to be fail- -// safe, or for use in any application requiring fail-safe -// performance, such as life-support or safety devices or -// systems, Class III medical devices, nuclear facilities, -// applications related to the deployment of airbags, or any -// other applications that could lead to death, personal -// injury, or severe property or environmental damage -// (individually and collectively, "Critical -// Applications"). Customer assumes the sole risk and -// liability of any use of Xilinx products in Critical -// Applications, subject only to applicable laws and -// regulations governing limitations on product liability. -// -// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -// PART OF THIS FILE AT ALL TIMES. -// - -//---------------------------------------------------------------------------- -// Clocking wizard demonstration testbench -//---------------------------------------------------------------------------- -// This demonstration testbench instantiates the example design for the -// clocking wizard. Input clocks are toggled, which cause the clocking -// network to lock and the counters to increment. -//---------------------------------------------------------------------------- - -`timescale 1ps/1ps - -`define wait_lock @(posedge CLK_VALID) - -module clkmgr_dcm_tb (); - - // Clock to Q delay of 100ps - localparam TCQ = 100; - - - // timescale is 1ps/1ps - localparam ONE_NS = 1000; - localparam PHASE_ERR_MARGIN = 100; // 100ps - // how many cycles to run - localparam COUNT_PHASE = 1024; - // we'll be using the period in many locations - localparam time PER1 = 20.0*ONE_NS; - localparam time PER1_1 = PER1/2; - localparam time PER1_2 = PER1 - PER1/2; - - // Declare the input clock signals - reg CLK_IN1 = 1; - - // The high bit of the sampling counter - wire COUNT; - // Status and control signals - reg RESET = 0; - wire INPUT_CLK_STOPPED; - wire CLK_VALID; - reg COUNTER_RESET = 0; -wire [1:1] CLK_OUT; -//Freq Check using the M & D values setting and actual Frequency generated - - reg [13:0] timeout_counter = 14'b00000000000000; - - // Input clock generation - //------------------------------------ - always begin - CLK_IN1 = #PER1_1 ~CLK_IN1; - CLK_IN1 = #PER1_2 ~CLK_IN1; - end - - // Test sequence - reg [15*8-1:0] test_phase = ""; - initial begin - // Set up any display statements using time to be readable - $timeformat(-12, 2, "ps", 10); - $display ("Timing checks are not valid"); - COUNTER_RESET = 0; - test_phase = "reset"; - RESET = 1; - #(PER1*6); - RESET = 0; - test_phase = "wait lock"; - `wait_lock; - #(PER1*6); - COUNTER_RESET = 1; - #(PER1*19.5) - COUNTER_RESET = 0; - #(PER1*1) - $display ("Timing checks are valid"); - test_phase = "counting"; - #(PER1*COUNT_PHASE); - - $display("SIMULATION PASSED"); - $display("SYSTEM_CLOCK_COUNTER : %0d\n",$time/PER1); - $finish; - end - - - - // Instantiation of the example design containing the clock - // network and sampling counters - //--------------------------------------------------------- - clkmgr_dcm_exdes - dut - (// Clock in ports - .CLK_IN1 (CLK_IN1), - // Reset for logic in example design - .COUNTER_RESET (COUNTER_RESET), - .CLK_OUT (CLK_OUT), - // High bits of the counters - .COUNT (COUNT), - // Status and control signals - .RESET (RESET), - .INPUT_CLK_STOPPED (INPUT_CLK_STOPPED), - .CLK_VALID (CLK_VALID)); - - -// Freq Check - -endmodule diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file deleted file mode 100644 index d59e315..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file +++ /dev/null @@ -1,2 +0,0 @@ -COMPILED_SDF_FILE = "../../implement/results/routed.sdf.X", -SCOPE = clkmgr_dcm_tb.dut; diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl deleted file mode 100644 index 14523af..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl +++ /dev/null @@ -1,9 +0,0 @@ -# file: simcmds.tcl - -# create the simulation script -vcd dumpfile isim.vcd -vcd dumpvars -m /clkmgr_dcm_tb -l 0 -wave add / -run 50000ns -quit - diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh deleted file mode 100644 index 0152cb0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh +++ /dev/null @@ -1,62 +0,0 @@ -# file: simulate_isim.sh -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# create the project -vlogcomp -work work ${XILINX}/verilog/src/glbl.v -vlogcomp -work work ../../implement/results/routed.v -vlogcomp -work work clkmgr_dcm_tb.v - -# compile the project -fuse work.clkmgr_dcm_tb work.glbl -L secureip -L simprims_ver -o clkmgr_dcm_isim.exe - -# run the simulation script -./clkmgr_dcm_isim.exe -tclbatch simcmds.tcl -sdfmax /clkmgr_dcm_tb/dut=../../implement/results/routed.sdf - -# run the simulation script -#./clkmgr_dcm_isim.exe -gui -tclbatch simcmds.tcl diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat deleted file mode 100644 index 8a08dc0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat +++ /dev/null @@ -1,59 +0,0 @@ -REM file: simulate_mti.bat -REM -REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -REM -REM This file contains confidential and proprietary information -REM of Xilinx, Inc. and is protected under U.S. and -REM international copyright and other intellectual property -REM laws. -REM -REM DISCLAIMER -REM This disclaimer is not a license and does not grant any -REM rights to the materials distributed herewith. Except as -REM otherwise provided in a valid license issued to you by -REM Xilinx, and to the maximum extent permitted by applicable -REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -REM (2) Xilinx shall not be liable (whether in contract or tort, -REM including negligence, or under any other theory of -REM liability) for any loss or damage of any kind or nature -REM related to, arising under or in connection with these -REM materials, including for any direct, or any indirect, -REM special, incidental, or consequential loss or damage -REM (including loss of data, profits, goodwill, or any type of -REM loss or damage suffered as a result of any action brought -REM by a third party) even if such damage or loss was -REM reasonably foreseeable or Xilinx had been advised of the -REM possibility of the same. -REM -REM CRITICAL APPLICATIONS -REM Xilinx products are not designed or intended to be fail- -REM safe, or for use in any application requiring fail-safe -REM performance, such as life-support or safety devices or -REM systems, Class III medical devices, nuclear facilities, -REM applications related to the deployment of airbags, or any -REM other applications that could lead to death, personal -REM injury, or severe property or environmental damage -REM (individually and collectively, "Critical -REM Applications"). Customer assumes the sole risk and -REM liability of any use of Xilinx products in Critical -REM Applications, subject only to applicable laws and -REM regulations governing limitations on product liability. -REM -REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -REM PART OF THIS FILE AT ALL TIMES. -REM -# set up the working directory -set work work -vlib work - -REM compile all of the files -vlog -work work %XILINX%\verilog\src\glbl.v -vlog -work work ..\..\implement\results\routed.v -vlog -work work clkmgr_dcm_tb.v - -REM run the simulation -vsim -c -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb\dut=..\..\implement\results\routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do deleted file mode 100644 index bfeb9c5..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do +++ /dev/null @@ -1,65 +0,0 @@ -# file: simulate_mti.do -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# set up the working directory -set work work -vlib work - -# compile all of the files -vlog -work work $env(XILINX)/verilog/src/glbl.v -vlog -work work ../../implement/results/routed.v -vlog -work work clkmgr_dcm_tb.v - -# run the simulation -vsim -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb/dut=../../implement/results/routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl -#do wave.do -#log -r /* -run 50000ns - - diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh deleted file mode 100644 index b842adc..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh +++ /dev/null @@ -1,61 +0,0 @@ -#/bin/sh -# file: simulate_mti.sh -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# set up the working directory -set work work -vlib work - -# compile all of the files -vlog -work work $XILINX/verilog/src/glbl.v -vlog -work work ../../implement/results/routed.v -vlog -work work clkmgr_dcm_tb.v - -# run the simulation -vsim -c -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb/dut=../../implement/results/routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh deleted file mode 100644 index fd18dde..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh +++ /dev/null @@ -1,64 +0,0 @@ -#!/bin/sh -# file: simulate_ncsim.sh -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# set up the working directory -mkdir work - -# compile all of the files -ncvlog -work work ${XILINX}/verilog/src/glbl.v -ncvlog -work work ../../implement/results/routed.v -ncvlog -work work clkmgr_dcm_tb.v - -# elaborate and run the simulation -ncsdfc ../../implement/results/routed.sdf - -ncelab -work work -access +wc -pulse_r 10 -nonotifier work.clkmgr_dcm_tb work.glbl -sdf_cmd_file sdf_cmd_file -ncsim -input "@database -open -shm nc; probe -create -database nc -all -depth all; run 50000ns; exit" work.clkmgr_dcm_tb - diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh deleted file mode 100644 index 26a8c27..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh +++ /dev/null @@ -1,72 +0,0 @@ -#!/bin/sh -# file: simulate_vcs.sh -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# remove old files -rm -rf simv* csrc DVEfiles AN.DB - -# compile all of the files -# Note that -sverilog is not strictly required- You can -# remove the -sverilog if you change the type of the -# localparam for the periods in the testbench file to -# [63:0] from time - vlogan -sverilog \ - clkmgr_dcm_tb.v \ - ../../implement/results/routed.v - - -# prepare the simulation -vcs -sdf max:clkmgr_dcm_exdes:../../implement/results/routed.sdf +v2k -y $XILINX/verilog/src/simprims \ - +libext+.v -debug clkmgr_dcm_tb.v ../../implement/results/routed.v - -# run the simulation -./simv -ucli -i ucli_commands.key - -# launch the viewer -#dve -vpd vcdplus.vpd -session vcs_session.tcl diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key deleted file mode 100644 index b32669e..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key +++ /dev/null @@ -1,5 +0,0 @@ - -call {$vcdpluson} -run 50000ns -call {$vcdplusclose} -quit diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl deleted file mode 100644 index 6cc6e24..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl +++ /dev/null @@ -1 +0,0 @@ -gui_open_window Wave diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/wave.do b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/wave.do deleted file mode 100644 index 7cc804b..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/wave.do +++ /dev/null @@ -1,71 +0,0 @@ -# file: wave.do -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -onerror {resume} -quietly WaveActivateNextPane {} 0 -add wave -noupdate /clkmgr_dcm_tb/CLK_IN1 -add wave -noupdate /clkmgr_dcm_tb/COUNT -add wave -noupdate /clkmgr_dcm_tb/RESET -TreeUpdate [SetDefaultTree] -WaveRestoreCursors {{Cursor 1} {3223025 ps} 0} -configure wave -namecolwidth 238 -configure wave -valuecolwidth 107 -configure wave -justifyvalue left -configure wave -signalnamewidth 0 -configure wave -snapdistance 10 -configure wave -datasetprefix 0 -configure wave -rowmargin 4 -configure wave -childrowmargin 2 -configure wave -gridoffset 0 -configure wave -gridperiod 1 -configure wave -griddelta 40 -configure wave -timeline 0 -configure wave -timelineunits ps -update -WaveRestoreZoom {0 ps} {74848022 ps} diff --git a/common/rtl/ipcore/clkmgr_dcm_flist.txt b/common/rtl/ipcore/clkmgr_dcm_flist.txt deleted file mode 100644 index bd1b2cd..0000000 --- a/common/rtl/ipcore/clkmgr_dcm_flist.txt +++ /dev/null @@ -1,54 +0,0 @@ -# Output products list for -_xmsgs\pn_parser.xmsgs -clkmgr_dcm.asy -clkmgr_dcm.gise -clkmgr_dcm.ucf -clkmgr_dcm.v -clkmgr_dcm.veo -clkmgr_dcm.xco -clkmgr_dcm.xdc -clkmgr_dcm.xise -clkmgr_dcm\clk_wiz_v3_6_readme.txt -clkmgr_dcm\doc\clk_wiz_v3_6_readme.txt -clkmgr_dcm\doc\clk_wiz_v3_6_vinfo.html -clkmgr_dcm\doc\pg065_clk_wiz.pdf -clkmgr_dcm\example_design\clkmgr_dcm_exdes.ucf -clkmgr_dcm\example_design\clkmgr_dcm_exdes.v -clkmgr_dcm\example_design\clkmgr_dcm_exdes.xdc -clkmgr_dcm\implement\implement.bat -clkmgr_dcm\implement\implement.sh -clkmgr_dcm\implement\planAhead_ise.bat -clkmgr_dcm\implement\planAhead_ise.sh -clkmgr_dcm\implement\planAhead_ise.tcl -clkmgr_dcm\implement\planAhead_rdn.bat -clkmgr_dcm\implement\planAhead_rdn.sh -clkmgr_dcm\implement\planAhead_rdn.tcl -clkmgr_dcm\implement\xst.prj -clkmgr_dcm\implement\xst.scr -clkmgr_dcm\simulation\clkmgr_dcm_tb.v -clkmgr_dcm\simulation\functional\simcmds.tcl -clkmgr_dcm\simulation\functional\simulate_isim.bat -clkmgr_dcm\simulation\functional\simulate_isim.sh -clkmgr_dcm\simulation\functional\simulate_mti.bat -clkmgr_dcm\simulation\functional\simulate_mti.do -clkmgr_dcm\simulation\functional\simulate_mti.sh -clkmgr_dcm\simulation\functional\simulate_ncsim.sh -clkmgr_dcm\simulation\functional\simulate_vcs.sh -clkmgr_dcm\simulation\functional\ucli_commands.key -clkmgr_dcm\simulation\functional\vcs_session.tcl -clkmgr_dcm\simulation\functional\wave.do -clkmgr_dcm\simulation\functional\wave.sv -clkmgr_dcm\simulation\timing\clkmgr_dcm_tb.v -clkmgr_dcm\simulation\timing\sdf_cmd_file -clkmgr_dcm\simulation\timing\simcmds.tcl -clkmgr_dcm\simulation\timing\simulate_isim.sh -clkmgr_dcm\simulation\timing\simulate_mti.bat -clkmgr_dcm\simulation\timing\simulate_mti.do -clkmgr_dcm\simulation\timing\simulate_mti.sh -clkmgr_dcm\simulation\timing\simulate_ncsim.sh -clkmgr_dcm\simulation\timing\simulate_vcs.sh -clkmgr_dcm\simulation\timing\ucli_commands.key -clkmgr_dcm\simulation\timing\vcs_session.tcl -clkmgr_dcm\simulation\timing\wave.do -clkmgr_dcm_flist.txt -clkmgr_dcm_xmdf.tcl diff --git a/common/rtl/ipcore/clkmgr_dcm_xmdf.tcl b/common/rtl/ipcore/clkmgr_dcm_xmdf.tcl deleted file mode 100644 index 307029b..0000000 --- a/common/rtl/ipcore/clkmgr_dcm_xmdf.tcl +++ /dev/null @@ -1,140 +0,0 @@ -# The package naming convention is _xmdf -package provide clkmgr_dcm_xmdf 1.0 - -# This includes some utilities that support common XMDF operations -package require utilities_xmdf - -# Define a namespace for this package. The name of the name space -# is _xmdf -namespace eval ::clkmgr_dcm_xmdf { -# Use this to define any statics -} - -# Function called by client to rebuild the params and port arrays -# Optional when the use context does not require the param or ports -# arrays to be available. -proc ::clkmgr_dcm_xmdf::xmdfInit { instance } { -# Variable containg name of library into which module is compiled -# Recommendation: -# Required -utilities_xmdf::xmdfSetData $instance Module Attributes Name clkmgr_dcm -} -# ::clkmgr_dcm_xmdf::xmdfInit - -# Function called by client to fill in all the xmdf* data variables -# based on the current settings of the parameters -proc ::clkmgr_dcm_xmdf::xmdfApplyParams { instance } { - -set fcount 0 -# Array containing libraries that are assumed to exist -# Examples include unisim and xilinxcorelib -# Optional -# In this example, we assume that the unisim library will -# be magically -# available to the simulation and synthesis tool -utilities_xmdf::xmdfSetData $instance FileSet $fcount type logical_library -utilities_xmdf::xmdfSetData $instance FileSet $fcount logical_library unisim -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/clk_wiz_readme.txt -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/doc/clk_wiz_ds709.pdf -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/doc/clk_wiz_gsg521.pdf -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/implement/implement.bat -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/implement/implement.sh -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/implement/xst.prj -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/implement/xst.scr -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/clkmgr_dcm_tb.v -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/simcmds.tcl -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/simulate_isim.sh -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/simulate_mti.do -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/simulate_ncsim.sh -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/simulate_vcs.sh -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/ucli_commands.key -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/vcs_session.tcl -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/wave.do -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/wave.sv -utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.asy -utilities_xmdf::xmdfSetData $instance FileSet $fcount type asy -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.ejp -utilities_xmdf::xmdfSetData $instance FileSet $fcount type AnyView -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.ucf -utilities_xmdf::xmdfSetData $instance FileSet $fcount type ucf -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.v -utilities_xmdf::xmdfSetData $instance FileSet $fcount type verilog -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.veo -utilities_xmdf::xmdfSetData $instance FileSet $fcount type verilog_template -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.xco -utilities_xmdf::xmdfSetData $instance FileSet $fcount type coregen_ip -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm_xmdf.tcl -utilities_xmdf::xmdfSetData $instance FileSet $fcount type AnyView -incr fcount - -utilities_xmdf::xmdfSetData $instance FileSet $fcount associated_module clkmgr_dcm -incr fcount - -} - -# ::gen_comp_name_xmdf::xmdfApplyParams diff --git a/common/rtl/ipcore/coregen.cgp b/common/rtl/ipcore/coregen.cgp deleted file mode 100644 index 8bc2e70..0000000 --- a/common/rtl/ipcore/coregen.cgp +++ /dev/null @@ -1,9 +0,0 @@ -SET busformat = BusFormatAngleBracketNotRipped -SET designentry = Verilog -SET device = xc6slx45 -SET devicefamily = spartan6 -SET flowvendor = Other -SET package = csg324 -SET speedgrade = -3 -SET verilogsim = true -SET vhdlsim = false diff --git a/common/rtl/ipcore/create_clkmgr_dcm.tcl b/common/rtl/ipcore/create_clkmgr_dcm.tcl deleted file mode 100644 index fec8dec..0000000 --- a/common/rtl/ipcore/create_clkmgr_dcm.tcl +++ /dev/null @@ -1,37 +0,0 @@ -## -## Core Generator Run Script, generator for Project Navigator create command -## - -proc findRtfPath { relativePath } { - set xilenv "" - if { [info exists ::env(XILINX) ] } { - if { [info exists ::env(MYXILINX)] } { - set xilenv [join [list $::env(MYXILINX) $::env(XILINX)] $::xilinx::path_sep ] - } else { - set xilenv $::env(XILINX) - } - } - foreach path [ split $xilenv $::xilinx::path_sep ] { - set fullPath [ file join $path $relativePath ] - if { [ file exists $fullPath ] } { - return $fullPath - } - } - return "" -} - -source [ findRtfPath "data/projnav/scripts/dpm_cgUtils.tcl" ] - -set result [ run_cg_create "xilinx.com:ip:clk_wiz:3.6" "clkmgr_dcm" "Clocking Wizard" "Clocking Wizard (xilinx.com:ip:clk_wiz:3.6) generated by Project Navigator" xc6slx45-3csg324 Verilog ] - -if { $result == 0 } { - puts "Core Generator create command completed successfully." -} elseif { $result == 1 } { - puts "Core Generator create command failed." -} elseif { $result == 3 || $result == 4 } { - # convert 'version check' result to real return range, bypassing any messages. - set result [ expr $result - 3 ] -} else { - puts "Core Generator create cancelled." -} -exit $result diff --git a/common/rtl/ipcore/edit_clkmgr_dcm.tcl b/common/rtl/ipcore/edit_clkmgr_dcm.tcl deleted file mode 100644 index 4992eb1..0000000 --- a/common/rtl/ipcore/edit_clkmgr_dcm.tcl +++ /dev/null @@ -1,37 +0,0 @@ -## -## Core Generator Run Script, generator for Project Navigator edit command -## - -proc findRtfPath { relativePath } { - set xilenv "" - if { [info exists ::env(XILINX) ] } { - if { [info exists ::env(MYXILINX)] } { - set xilenv [join [list $::env(MYXILINX) $::env(XILINX)] $::xilinx::path_sep ] - } else { - set xilenv $::env(XILINX) - } - } - foreach path [ split $xilenv $::xilinx::path_sep ] { - set fullPath [ file join $path $relativePath ] - if { [ file exists $fullPath ] } { - return $fullPath - } - } - return "" -} - -source [ findRtfPath "data/projnav/scripts/dpm_cgUtils.tcl" ] - -set result [ run_cg_edit "clkmgr_dcm" xc6slx45-3csg324 Verilog ] - -if { $result == 0 } { - puts "Core Generator edit command completed successfully." -} elseif { $result == 1 } { - puts "Core Generator edit command failed." -} elseif { $result == 3 || $result == 4 } { - # convert 'version check' result to real return range, bypassing any messages. - set result [ expr $result - 3 ] -} else { - puts "Core Generator edit cancelled." -} -exit $result -- cgit v1.2.3