From 02ca34c86ba35a6036be316f7e31d0216e3a67e0 Mon Sep 17 00:00:00 2001
From: Paul Selkirk <paul@psgd.org>
Date: Fri, 17 Jul 2015 13:26:46 -0400
Subject: remove all non-essential files related to clkmgr_dcm

---
 .../clkmgr_dcm/simulation/functional/wave.sv       | 118 ---------------------
 1 file changed, 118 deletions(-)
 delete mode 100644 common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv

(limited to 'common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv')

diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv
deleted file mode 100644
index c3c3eef..0000000
--- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv
+++ /dev/null
@@ -1,118 +0,0 @@
-# file: wave.sv
-# 
-# (c) Copyright 2008 - 2010 Xilinx, Inc. All rights reserved.
-# 
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-# 
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-# 
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-# 
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-# Get the windows set up
-#
-if {[catch {window new WatchList -name "Design Browser 1" -geometry 1054x819+536+322}] != ""} {
-    window geometry "Design Browser 1" 1054x819+536+322
-}
-window target "Design Browser 1" on
-browser using {Design Browser 1}
-browser set \
-    -scope nc::clkmgr_dcm_tb
-browser yview see nc::clkmgr_dcm_tb
-browser timecontrol set -lock 0
-
-if {[catch {window new WaveWindow -name "Waveform 1" -geometry 1010x600+0+541}] != ""} {
-    window geometry "Waveform 1" 1010x600+0+541
-}
-window target "Waveform 1" on
-waveform using {Waveform 1}
-waveform sidebar visibility partial
-waveform set \
-    -primarycursor TimeA \
-    -signalnames name \
-    -signalwidth 175 \
-    -units ns \
-    -valuewidth 75
-cursor set -using TimeA -time 0
-waveform baseline set -time 0
-waveform xview limits 0 20000n
-
-#
-# Define signal groups
-#
-catch {group new -name {Output clocks} -overlay 0}
-catch {group new -name {Status/control} -overlay 0}
-catch {group new -name {Counters} -overlay 0}
-
-set id [waveform add -signals [list {nc::clkmgr_dcm_tb.CLK_IN1}]]
-
-group using {Output clocks}
-group set -overlay 0
-group set -comment {}
-group clear 0 end
-
-group insert \
-    {clkmgr_dcm_tb.dut.clk} \
-
-group using {Counters}
-group set -overlay 0
-group set -comment {}
-group clear 0 end
-
-group insert \
-    {clkmgr_dcm_tb.dut.counter} \
-
-group using {Status/control}
-group set -overlay 0
-group set -comment {}
-group clear 0 end
-
-group insert \
-   {nc::clkmgr_dcm_tb.RESET}    {nc::clkmgr_dcm_tb.INPUT_CLK_STOPPED} 
-
-set id [waveform add -signals [list {nc::clkmgr_dcm_tb.COUNT} ]]
-
-set id [waveform add -signals [list {nc::clkmgr_dcm_tb.test_phase} ]]
-waveform format $id -radix %a
-
-set groupId [waveform add -groups {{Input clocks}}]
-set groupId [waveform add -groups {{Output clocks}}]
-set groupId [waveform add -groups {{Status/control}}]
-set groupId [waveform add -groups {{Counters}}]
-- 
cgit v1.2.3