aboutsummaryrefslogtreecommitdiff
path: root/sw
diff options
context:
space:
mode:
Diffstat (limited to 'sw')
-rw-r--r--sw/cryptech.h131
1 files changed, 81 insertions, 50 deletions
diff --git a/sw/cryptech.h b/sw/cryptech.h
index e36b71a..186f804 100644
--- a/sw/cryptech.h
+++ b/sw/cryptech.h
@@ -36,10 +36,46 @@
//
//======================================================================
+/*
-// Segments.
+Each Cryptech core has a set of 4-byte registers, which are accessed
+through a 16-bit address. The address space is divided as follows:
+ 3 bits segment selector | up to 8 segments
+ 5 bits core selector | up to 32 cores/segment (see note below)
+ 8 bits register selector | up to 256 registers/core (see modexp below)
+
+i.e, the address is structured as:
+sss ccccc rrrrrrrr
+
+The I2C and UART communication channels use this 16-bit address format
+directly in their read and write commands.
+
+The EIM communications channel translates this 16-bit address into a
+32-bit memory-mapped address in the range 0x08000000..807FFFF:
+00001000000000 sss 0 ccccc rrrrrrrr 00
+
+EIM, as implemented on the Novena, uses a 19-bit address space:
+ Bits 18..16 are the semgent selector.
+ Bits 15..10 are the core selector.
+ Bits 9..2 are the register selector.
+ Bits 1..0 are zero, because reads and writes are always word aligned.
+
+Note that EIM can support 64 cores per segment, but we sacrifice one bit
+in order to map it into a 16-bit address space.
+
+*/
+
+
+//------------------------------------------------------------------
+// Default sizes
+//------------------------------------------------------------------
#define CORE_SIZE 0x100
#define SEGMENT_SIZE 0x20 * CORE_SIZE
+
+
+//------------------------------------------------------------------
+// Segments
+//------------------------------------------------------------------
#define SEGMENT_OFFSET_GLOBALS 0 * SEGMENT_SIZE
#define SEGMENT_OFFSET_HASHES 1 * SEGMENT_SIZE
#define SEGMENT_OFFSET_RNGS 2 * SEGMENT_SIZE
@@ -82,6 +118,7 @@
#define COMM_ADDR_NAME1 COMM_ADDR_BASE + ADDR_NAME1
#define COMM_ADDR_VERSION COMM_ADDR_BASE + ADDR_VERSION
+// current name and version values
#define NOVENA_BOARD_NAME0 "PVT1"
#define NOVENA_BOARD_NAME1 " "
#define NOVENA_BOARD_VERSION "0.10"
@@ -98,7 +135,7 @@
//------------------------------------------------------------------
// Hashes segment.
//------------------------------------------------------------------
-// addresses and codes common to all hash cores
+// addresses common to all hash cores
#define CTRL_INIT_CMD 1
#define CTRL_NEXT_CMD 2
#define ADDR_BLOCK 0x10
@@ -148,6 +185,7 @@
#define MODE_SHA_384 2 << 2
#define MODE_SHA_512 3 << 2
+// current name and version values
#define SHA1_NAME0 "sha1"
#define SHA1_NAME1 " "
#define SHA1_VERSION "0.50"
@@ -226,6 +264,7 @@
#define CSPRNG_ADDR_NBLOCKS_LO CSPRNG_ADDR_BASE + 0x41
#define CSPRNG_ADDR_NBLOCKS_HI CSPRNG_ADDR_BASE + 0x42
+// current name and version values
#define TRNG_NAME0 "trng"
#define TRNG_NAME1 " "
#define TRNG_VERSION "0.50"
@@ -247,45 +286,40 @@
// CIPHERS segment.
// -----------------------------------------------------------------
// aes core.
-#define AES_ADDR_BASE SEGMENT_OFFSET_CIPHERS + (0 * CORE_SIZE)
-#define AES_ADDR_NAME0 AES_ADDR_BASE + ADDR_NAME0
-#define AES_ADDR_NAME1 AES_ADDR_BASE + ADDR_NAME1
-#define AES_ADDR_VERSION AES_ADDR_BASE + ADDR_VERSION
-
-#define AES_ADDR_CTRL AES_ADDR_BASE + ADDR_CTRL
-#define AES_CTRL_INIT_BIT CTRL_INIT_BIT
-#define AES_CTRL_NEXT_BIT CTRL_NEXT_BIT
-
-#define AES_ADDR_STATUS AES_ADDR_BASE + ADDR_STATUS
-#define AES_STATUS_READY_BIT STATUS_READY_BIT
-#define AES_STATUS_VALID_BIT STATUS_VALID_BIT
-
-#define AES_ADDR_CONFIG AES_ADDR_BASE + 0x0a
-#define AES_CONFIG_ENCDEC_BIT 1
-#define AES_CONFIG_KEYLEN_BIT 2
-
-#define AES_ADDR_KEY0 0x10
-#define AES_ADDR_KEY1 0x11
-#define AES_ADDR_KEY2 0x12
-#define AES_ADDR_KEY3 0x13
-#define AES_ADDR_KEY4 0x14
-#define AES_ADDR_KEY5 0x15
-#define AES_ADDR_KEY6 0x16
-#define AES_ADDR_KEY7 0x17
-
-#define AES_ADDR_BLOCK0 0x20
-#define AES_ADDR_BLOCK1 0x21
-#define AES_ADDR_BLOCK2 0x22
-#define AES_ADDR_BLOCK3 0x23
-
-#define AES_ADDR_RESULT0 0x30
-#define AES_ADDR_RESULT1 0x31
-#define AES_ADDR_RESULT2 0x32
-#define AES_ADDR_RESULT3 0x33
-
-#define AES_CORE_NAME0 "aes "
-#define AES_CORE_NAME1 " "
-#define AES_CORE_VERSION "0.80"
+#define AES_ADDR_BASE SEGMENT_OFFSET_CIPHERS + (0 * CORE_SIZE)
+#define AES_ADDR_NAME0 AES_ADDR_BASE + ADDR_NAME0
+#define AES_ADDR_NAME1 AES_ADDR_BASE + ADDR_NAME1
+#define AES_ADDR_VERSION AES_ADDR_BASE + ADDR_VERSION
+#define AES_ADDR_CTRL AES_ADDR_BASE + ADDR_CTRL
+#define AES_ADDR_STATUS AES_ADDR_BASE + ADDR_STATUS
+
+#define AES_ADDR_CONFIG AES_ADDR_BASE + 0x0a
+#define AES_CONFIG_ENCDEC_BIT 1
+#define AES_CONFIG_KEYLEN_BIT 2
+
+#define AES_ADDR_KEY0 0x10
+#define AES_ADDR_KEY1 0x11
+#define AES_ADDR_KEY2 0x12
+#define AES_ADDR_KEY3 0x13
+#define AES_ADDR_KEY4 0x14
+#define AES_ADDR_KEY5 0x15
+#define AES_ADDR_KEY6 0x16
+#define AES_ADDR_KEY7 0x17
+
+#define AES_ADDR_BLOCK0 0x20
+#define AES_ADDR_BLOCK1 0x21
+#define AES_ADDR_BLOCK2 0x22
+#define AES_ADDR_BLOCK3 0x23
+
+#define AES_ADDR_RESULT0 0x30
+#define AES_ADDR_RESULT1 0x31
+#define AES_ADDR_RESULT2 0x32
+#define AES_ADDR_RESULT3 0x33
+
+// current name and version values
+#define AES_CORE_NAME0 "aes "
+#define AES_CORE_NAME1 " "
+#define AES_CORE_VERSION "0.80"
// Chacha core
@@ -293,17 +327,11 @@
#define CHACHA_ADDR_NAME0 CHACHA_ADDR_BASE + ADDR_NAME0
#define CHACHA_ADDR_NAME1 CHACHA_ADDR_BASE + ADDR_NAME1
#define CHACHA_ADDR_VERSION CHACHA_ADDR_BASE + ADDR_VERSION
-
#define CHACHA_ADDR_CTRL CHACHA_ADDR_BASE + ADDR_CTRL
-#define CHACHA_CTRL_INIT_BIT CTRL_INIT_BIT
-#define CHACHA_CTRL_NEXT_BIT CTRL_NEXT_BIT
-
#define CHACHA_ADDR_STATUS CHACHA_ADDR_BASE + ADDR_STATUS
-#define CHACHA_STATUS_READY_BIT STATUS_READY_BIT
-#define CHACHA_STATUS_VALID_BIT STATUS_VALID_BIT
#define CHACHA_ADDR_KEYLEN 0x0a
-#define CHACHA_KEYLEN_BIT 1
+#define CHACHA_KEYLEN 1
#define CHACHA_ADDR_ROUNDS 0x0b
@@ -353,6 +381,7 @@
#define CHACHA_ADDR_DATA_OUT14 0x8e
#define CHACHA_ADDR_DATA_OUT15 0x8f
+// current name and version values
#define CHACHA_NAME0 "chac"
#define CHACHA_NAME1 "ha "
#define CHACHA_VERSION "0.80"
@@ -373,8 +402,6 @@
#define MODEXP_ADDR_NAME1 MODEXP_ADDR_BASE + ADDR_NAME1
#define MODEXP_ADDR_VERSION MODEXP_ADDR_BASE + ADDR_VERSION
#define MODEXP_ADDR_CTRL MODEXP_ADDR_BASE + ADDR_CTRL
-#define MODEXP_CTRL_INIT_BIT 1
-#define MODEXP_CTRL_NEXT_BIT 2
#define MODEXP_ADDR_STATUS MODEXP_ADDR_BASE + ADDR_STATUS
#define MODEXP_ADDR_DELAY MODEXP_ADDR_BASE + 0x13
@@ -383,6 +410,10 @@
#define MODEXP_MODULUS_LENGTH MODEXP_ADDR_BASE + 0x20
#define MODEXP_EXPONENT_LENGTH MODEXP_ADDR_BASE + 0x21
+// Most cores need fewer than 256 registers, but Modexp needs many more.
+//#define NEXT_MATH_ADDR_BASE SEGMENT_OFFSET_MATH + (0x05 * CORE_SIZE)
+
+// current name and version values
#define MODEXP_NAME0 "mode"
#define MODEXP_NAME1 "xp "
#define MODEXP_VERSION "0.50"