diff options
Diffstat (limited to 'common/rtl/ipcore/clkmgr_dcm/simulation/timing')
12 files changed, 0 insertions, 620 deletions
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v deleted file mode 100644 index 9618253..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v +++ /dev/null @@ -1,149 +0,0 @@ -// file: clkmgr_dcm_tb.v
-//
-// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-//
-// This file contains confidential and proprietary information
-// of Xilinx, Inc. and is protected under U.S. and
-// international copyright and other intellectual property
-// laws.
-//
-// DISCLAIMER
-// This disclaimer is not a license and does not grant any
-// rights to the materials distributed herewith. Except as
-// otherwise provided in a valid license issued to you by
-// Xilinx, and to the maximum extent permitted by applicable
-// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-// (2) Xilinx shall not be liable (whether in contract or tort,
-// including negligence, or under any other theory of
-// liability) for any loss or damage of any kind or nature
-// related to, arising under or in connection with these
-// materials, including for any direct, or any indirect,
-// special, incidental, or consequential loss or damage
-// (including loss of data, profits, goodwill, or any type of
-// loss or damage suffered as a result of any action brought
-// by a third party) even if such damage or loss was
-// reasonably foreseeable or Xilinx had been advised of the
-// possibility of the same.
-//
-// CRITICAL APPLICATIONS
-// Xilinx products are not designed or intended to be fail-
-// safe, or for use in any application requiring fail-safe
-// performance, such as life-support or safety devices or
-// systems, Class III medical devices, nuclear facilities,
-// applications related to the deployment of airbags, or any
-// other applications that could lead to death, personal
-// injury, or severe property or environmental damage
-// (individually and collectively, "Critical
-// Applications"). Customer assumes the sole risk and
-// liability of any use of Xilinx products in Critical
-// Applications, subject only to applicable laws and
-// regulations governing limitations on product liability.
-//
-// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-// PART OF THIS FILE AT ALL TIMES.
-//
-
-//----------------------------------------------------------------------------
-// Clocking wizard demonstration testbench
-//----------------------------------------------------------------------------
-// This demonstration testbench instantiates the example design for the
-// clocking wizard. Input clocks are toggled, which cause the clocking
-// network to lock and the counters to increment.
-//----------------------------------------------------------------------------
-
-`timescale 1ps/1ps
-
-`define wait_lock @(posedge CLK_VALID)
-
-module clkmgr_dcm_tb ();
-
- // Clock to Q delay of 100ps
- localparam TCQ = 100;
-
-
- // timescale is 1ps/1ps
- localparam ONE_NS = 1000;
- localparam PHASE_ERR_MARGIN = 100; // 100ps
- // how many cycles to run
- localparam COUNT_PHASE = 1024;
- // we'll be using the period in many locations
- localparam time PER1 = 20.0*ONE_NS;
- localparam time PER1_1 = PER1/2;
- localparam time PER1_2 = PER1 - PER1/2;
-
- // Declare the input clock signals
- reg CLK_IN1 = 1;
-
- // The high bit of the sampling counter
- wire COUNT;
- // Status and control signals
- reg RESET = 0;
- wire INPUT_CLK_STOPPED;
- wire CLK_VALID;
- reg COUNTER_RESET = 0;
-wire [1:1] CLK_OUT;
-//Freq Check using the M & D values setting and actual Frequency generated
-
- reg [13:0] timeout_counter = 14'b00000000000000;
-
- // Input clock generation
- //------------------------------------
- always begin
- CLK_IN1 = #PER1_1 ~CLK_IN1;
- CLK_IN1 = #PER1_2 ~CLK_IN1;
- end
-
- // Test sequence
- reg [15*8-1:0] test_phase = "";
- initial begin
- // Set up any display statements using time to be readable
- $timeformat(-12, 2, "ps", 10);
- $display ("Timing checks are not valid");
- COUNTER_RESET = 0;
- test_phase = "reset";
- RESET = 1;
- #(PER1*6);
- RESET = 0;
- test_phase = "wait lock";
- `wait_lock;
- #(PER1*6);
- COUNTER_RESET = 1;
- #(PER1*19.5)
- COUNTER_RESET = 0;
- #(PER1*1)
- $display ("Timing checks are valid");
- test_phase = "counting";
- #(PER1*COUNT_PHASE);
-
- $display("SIMULATION PASSED");
- $display("SYSTEM_CLOCK_COUNTER : %0d\n",$time/PER1);
- $finish;
- end
-
-
-
- // Instantiation of the example design containing the clock
- // network and sampling counters
- //---------------------------------------------------------
- clkmgr_dcm_exdes
- dut
- (// Clock in ports
- .CLK_IN1 (CLK_IN1),
- // Reset for logic in example design
- .COUNTER_RESET (COUNTER_RESET),
- .CLK_OUT (CLK_OUT),
- // High bits of the counters
- .COUNT (COUNT),
- // Status and control signals
- .RESET (RESET),
- .INPUT_CLK_STOPPED (INPUT_CLK_STOPPED),
- .CLK_VALID (CLK_VALID));
-
-
-// Freq Check
-
-endmodule
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file deleted file mode 100644 index d59e315..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file +++ /dev/null @@ -1,2 +0,0 @@ -COMPILED_SDF_FILE = "../../implement/results/routed.sdf.X",
-SCOPE = clkmgr_dcm_tb.dut;
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl deleted file mode 100644 index 14523af..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl +++ /dev/null @@ -1,9 +0,0 @@ -# file: simcmds.tcl
-
-# create the simulation script
-vcd dumpfile isim.vcd
-vcd dumpvars -m /clkmgr_dcm_tb -l 0
-wave add /
-run 50000ns
-quit
-
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh deleted file mode 100644 index 0152cb0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh +++ /dev/null @@ -1,62 +0,0 @@ -# file: simulate_isim.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# create the project
-vlogcomp -work work ${XILINX}/verilog/src/glbl.v
-vlogcomp -work work ../../implement/results/routed.v
-vlogcomp -work work clkmgr_dcm_tb.v
-
-# compile the project
-fuse work.clkmgr_dcm_tb work.glbl -L secureip -L simprims_ver -o clkmgr_dcm_isim.exe
-
-# run the simulation script
-./clkmgr_dcm_isim.exe -tclbatch simcmds.tcl -sdfmax /clkmgr_dcm_tb/dut=../../implement/results/routed.sdf
-
-# run the simulation script
-#./clkmgr_dcm_isim.exe -gui -tclbatch simcmds.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat deleted file mode 100644 index 8a08dc0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat +++ /dev/null @@ -1,59 +0,0 @@ -REM file: simulate_mti.bat
-REM
-REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-REM
-REM This file contains confidential and proprietary information
-REM of Xilinx, Inc. and is protected under U.S. and
-REM international copyright and other intellectual property
-REM laws.
-REM
-REM DISCLAIMER
-REM This disclaimer is not a license and does not grant any
-REM rights to the materials distributed herewith. Except as
-REM otherwise provided in a valid license issued to you by
-REM Xilinx, and to the maximum extent permitted by applicable
-REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-REM (2) Xilinx shall not be liable (whether in contract or tort,
-REM including negligence, or under any other theory of
-REM liability) for any loss or damage of any kind or nature
-REM related to, arising under or in connection with these
-REM materials, including for any direct, or any indirect,
-REM special, incidental, or consequential loss or damage
-REM (including loss of data, profits, goodwill, or any type of
-REM loss or damage suffered as a result of any action brought
-REM by a third party) even if such damage or loss was
-REM reasonably foreseeable or Xilinx had been advised of the
-REM possibility of the same.
-REM
-REM CRITICAL APPLICATIONS
-REM Xilinx products are not designed or intended to be fail-
-REM safe, or for use in any application requiring fail-safe
-REM performance, such as life-support or safety devices or
-REM systems, Class III medical devices, nuclear facilities,
-REM applications related to the deployment of airbags, or any
-REM other applications that could lead to death, personal
-REM injury, or severe property or environmental damage
-REM (individually and collectively, "Critical
-REM Applications"). Customer assumes the sole risk and
-REM liability of any use of Xilinx products in Critical
-REM Applications, subject only to applicable laws and
-REM regulations governing limitations on product liability.
-REM
-REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-REM PART OF THIS FILE AT ALL TIMES.
-REM
-# set up the working directory
-set work work
-vlib work
-
-REM compile all of the files
-vlog -work work %XILINX%\verilog\src\glbl.v
-vlog -work work ..\..\implement\results\routed.v
-vlog -work work clkmgr_dcm_tb.v
-
-REM run the simulation
-vsim -c -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb\dut=..\..\implement\results\routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do deleted file mode 100644 index bfeb9c5..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do +++ /dev/null @@ -1,65 +0,0 @@ -# file: simulate_mti.do
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# set up the working directory
-set work work
-vlib work
-
-# compile all of the files
-vlog -work work $env(XILINX)/verilog/src/glbl.v
-vlog -work work ../../implement/results/routed.v
-vlog -work work clkmgr_dcm_tb.v
-
-# run the simulation
-vsim -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb/dut=../../implement/results/routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl
-#do wave.do
-#log -r /*
-run 50000ns
-
-
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh deleted file mode 100644 index b842adc..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh +++ /dev/null @@ -1,61 +0,0 @@ -#/bin/sh
-# file: simulate_mti.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# set up the working directory
-set work work
-vlib work
-
-# compile all of the files
-vlog -work work $XILINX/verilog/src/glbl.v
-vlog -work work ../../implement/results/routed.v
-vlog -work work clkmgr_dcm_tb.v
-
-# run the simulation
-vsim -c -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb/dut=../../implement/results/routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh deleted file mode 100644 index fd18dde..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh +++ /dev/null @@ -1,64 +0,0 @@ -#!/bin/sh
-# file: simulate_ncsim.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# set up the working directory
-mkdir work
-
-# compile all of the files
-ncvlog -work work ${XILINX}/verilog/src/glbl.v
-ncvlog -work work ../../implement/results/routed.v
-ncvlog -work work clkmgr_dcm_tb.v
-
-# elaborate and run the simulation
-ncsdfc ../../implement/results/routed.sdf
-
-ncelab -work work -access +wc -pulse_r 10 -nonotifier work.clkmgr_dcm_tb work.glbl -sdf_cmd_file sdf_cmd_file
-ncsim -input "@database -open -shm nc; probe -create -database nc -all -depth all; run 50000ns; exit" work.clkmgr_dcm_tb
-
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh deleted file mode 100644 index 26a8c27..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh +++ /dev/null @@ -1,72 +0,0 @@ -#!/bin/sh
-# file: simulate_vcs.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# remove old files
-rm -rf simv* csrc DVEfiles AN.DB
-
-# compile all of the files
-# Note that -sverilog is not strictly required- You can
-# remove the -sverilog if you change the type of the
-# localparam for the periods in the testbench file to
-# [63:0] from time
- vlogan -sverilog \
- clkmgr_dcm_tb.v \
- ../../implement/results/routed.v
-
-
-# prepare the simulation
-vcs -sdf max:clkmgr_dcm_exdes:../../implement/results/routed.sdf +v2k -y $XILINX/verilog/src/simprims \
- +libext+.v -debug clkmgr_dcm_tb.v ../../implement/results/routed.v
-
-# run the simulation
-./simv -ucli -i ucli_commands.key
-
-# launch the viewer
-#dve -vpd vcdplus.vpd -session vcs_session.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key deleted file mode 100644 index b32669e..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key +++ /dev/null @@ -1,5 +0,0 @@ -
-call {$vcdpluson}
-run 50000ns
-call {$vcdplusclose}
-quit
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl deleted file mode 100644 index 6cc6e24..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl +++ /dev/null @@ -1 +0,0 @@ -gui_open_window Wave
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/wave.do b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/wave.do deleted file mode 100644 index 7cc804b..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/wave.do +++ /dev/null @@ -1,71 +0,0 @@ -# file: wave.do
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-onerror {resume}
-quietly WaveActivateNextPane {} 0
-add wave -noupdate /clkmgr_dcm_tb/CLK_IN1
-add wave -noupdate /clkmgr_dcm_tb/COUNT
-add wave -noupdate /clkmgr_dcm_tb/RESET
-TreeUpdate [SetDefaultTree]
-WaveRestoreCursors {{Cursor 1} {3223025 ps} 0}
-configure wave -namecolwidth 238
-configure wave -valuecolwidth 107
-configure wave -justifyvalue left
-configure wave -signalnamewidth 0
-configure wave -snapdistance 10
-configure wave -datasetprefix 0
-configure wave -rowmargin 4
-configure wave -childrowmargin 2
-configure wave -gridoffset 0
-configure wave -gridperiod 1
-configure wave -griddelta 40
-configure wave -timeline 0
-configure wave -timelineunits ps
-update
-WaveRestoreZoom {0 ps} {74848022 ps}
|