diff options
| -rwxr-xr-x | eim/sw/Makefile | 31 | ||||
| -rw-r--r-- | eim/sw/tc_eim.h | 50 | ||||
| -rwxr-xr-x | i2c/sw/Makefile | 29 | ||||
| -rw-r--r-- | i2c/sw/cryptech_memory_map.h | 217 | ||||
| -rw-r--r-- | i2c/sw/hash_i2c.c | 288 | ||||
| -rw-r--r-- | i2c/sw/hash_tester_i2c.c | 634 | ||||
| -rw-r--r-- | i2c/sw/tc_i2c.h | 55 | ||||
| -rw-r--r-- | i2c/sw/trng_extractor_i2c.c | 169 | ||||
| -rw-r--r-- | i2c/sw/trng_tester_i2c.c | 321 | ||||
| -rwxr-xr-x | sw/Makefile | 44 | ||||
| -rwxr-xr-x | sw/Makefile.i2c | 44 | ||||
| -rw-r--r-- | sw/cryptech.h (renamed from eim/sw/cryptech_memory_map.h) | 138 | ||||
| -rw-r--r-- | sw/hash.c (renamed from eim/sw/hash_eim.c) | 6 | ||||
| -rw-r--r-- | sw/hash_tester.c (renamed from eim/sw/hash_tester_eim.c) | 6 | ||||
| -rw-r--r-- | sw/novena-eim.c (renamed from eim/sw/novena-eim.c) | 0 | ||||
| -rw-r--r-- | sw/novena-eim.h (renamed from eim/sw/novena-eim.h) | 0 | ||||
| -rw-r--r-- | sw/tc_eim.c (renamed from eim/sw/tc_eim.c) | 27 | ||||
| -rw-r--r-- | sw/tc_i2c.c (renamed from i2c/sw/tc_i2c.c) | 10 | ||||
| -rw-r--r-- | sw/trng_extractor.c (renamed from eim/sw/trng_extractor_eim.c) | 5 | ||||
| -rw-r--r-- | sw/trng_tester.c (renamed from eim/sw/trng_tester_eim.c) | 4 |
20 files changed, 203 insertions, 1875 deletions
diff --git a/eim/sw/Makefile b/eim/sw/Makefile deleted file mode 100755 index 8b5f974..0000000 --- a/eim/sw/Makefile +++ /dev/null @@ -1,31 +0,0 @@ -all: hash_tester_eim trng_tester_eim hash_eim trng_extractor_eim - -.c.o: - gcc -c -Wall -o $@ $< - -hash_tester_eim: hash_tester_eim.o novena-eim.o tc_eim.o - gcc -o $@ $^ - -hash_tester_eim.o: hash_tester_eim.c tc_eim.h cryptech_memory_map.h - -trng_tester_eim: trng_tester_eim.o novena-eim.o tc_eim.o - gcc -o $@ $^ - -trng_tester_eim.o: trng_tester_eim.c tc_eim.h cryptech_memory_map.h - -hash_eim: hash_eim.o novena-eim.o tc_eim.o - gcc -o $@ $^ - -hash_eim.o: hash_eim.c tc_eim.h - -trng_extractor_eim: trng_extractor_eim.o novena-eim.o tc_eim.o - gcc -o $@ $^ - -trng_extractor_eim.o: trng_extractor_eim.c tc_eim.h cryptech_memory_map.h - -novena-eim.o: novena-eim.c novena-eim.h - -tc_eim.o: tc_eim.c tc_eim.h novena-eim.h - -clean: - rm -f *.o hash_tester_eim trng_tester_eim hash_eim trng_extractor_eim diff --git a/eim/sw/tc_eim.h b/eim/sw/tc_eim.h deleted file mode 100644 index 5da18e4..0000000 --- a/eim/sw/tc_eim.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * tc_eim.h - * -------- - * This module contains common code to talk to the FPGA over the EIM bus. - * - * Author: Paul Selkirk - * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * - Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * - Neither the name of the NORDUnet nor the names of its contributors may - * be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A - * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED - * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "novena-eim.h" -#define BASE_ADDR EIM_BASE_ADDR -#define SEGMENT_SIZE 0x10000 -#define ADDR(x) (x << 2) -#include "cryptech_memory_map.h" - -/* test case public functions */ -int tc_write(off_t offset, const uint8_t *buf, size_t len); -int tc_read(off_t offset, uint8_t *buf, size_t len); -int tc_expected(off_t offset, const uint8_t *expected, size_t len); -int tc_init(off_t offset); -int tc_next(off_t offset); -int tc_wait(off_t offset, uint8_t status, int *count); -int tc_wait_ready(off_t offset); -int tc_wait_valid(off_t offset); diff --git a/i2c/sw/Makefile b/i2c/sw/Makefile deleted file mode 100755 index 9869e04..0000000 --- a/i2c/sw/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -all: hash_tester_i2c trng_tester_i2c hash_i2c trng_extractor_i2c - -.c.o: - gcc -c -Wall -o $@ $< - -hash_tester_i2c: hash_tester_i2c.o tc_i2c.o - gcc -o $@ $^ - -hash_tester_i2c.o: hash_tester_i2c.c tc_i2c.h - -trng_tester_i2c: trng_tester_i2c.o tc_i2c.o - gcc -o $@ $^ - -trng_tester_i2c.o: trng_tester_i2c.c tc_i2c.h - -hash_i2c: hash_i2c.o tc_i2c.o - gcc -o $@ $^ - -hash_i2c.o: hash_i2c.c tc_i2c.h - -trng_extractor_i2c: trng_extractor_i2c.o tc_i2c.o - gcc -o $@ $^ - -trng_extractor_i2c.o: trng_extractor_i2c.c tc_i2c.h - -tc_i2c.o: tc_i2c.c tc_i2c.h - -clean: - rm -f *.o hash_tester_i2c trng_tester_i2c hash_i2c trng_extractor_i2c diff --git a/i2c/sw/cryptech_memory_map.h b/i2c/sw/cryptech_memory_map.h deleted file mode 100644 index 5cf7f42..0000000 --- a/i2c/sw/cryptech_memory_map.h +++ /dev/null @@ -1,217 +0,0 @@ -//====================================================================== -// -// cryptech_memory_map.h -// --------------------- -// The memory map for Cryptech cores. -// -// -// Authors: Joachim Strombergson, Paul Selkirk -// Copyright (c) 2015, NORDUnet A/S All rights reserved. -// -// Redistribution and use in source and binary forms, with or without -// modification, are permitted provided that the following conditions are -// met: -// - Redistributions of source code must retain the above copyright notice, -// this list of conditions and the following disclaimer. -// -// - Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in the -// documentation and/or other materials provided with the distribution. -// -// - Neither the name of the NORDUnet nor the names of its contributors may -// be used to endorse or promote products derived from this software -// without specific prior written permission. -// -// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED -// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED -// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -// -//====================================================================== - -// BASE_ADDR, SEGMENT_SIZE, and ADDR are defined in tc_[eim|i2c].h, -// which #includes this file. - -// default definitions from i2c, because defaults are good -#ifndef BASE_ADDR -#define BASE_ADDR 0 -#endif -#ifndef SEGMENT_SIZE -#define SEGMENT_SIZE 0x2000 -#endif -#ifndef ADDR -#define ADDR(x) (x) -#endif - -#ifndef bitsToBytes -#define bitsToBytes(x) (x / 8) -#endif - -// Segments. -#define SEGMENT_OFFSET_GLOBALS BASE_ADDR + (0 * SEGMENT_SIZE) -#define SEGMENT_OFFSET_HASHES BASE_ADDR + (1 * SEGMENT_SIZE) -#define SEGMENT_OFFSET_RNGS BASE_ADDR + (2 * SEGMENT_SIZE) -#define SEGMENT_OFFSET_CIPHERS BASE_ADDR + (3 * SEGMENT_SIZE) - - -// addresses and codes common to all cores -#define ADDR_NAME0 ADDR(0x00) -#define ADDR_NAME1 ADDR(0x01) -#define ADDR_VERSION ADDR(0x02) - - -//------------------------------------------------------------------ -// Board segment. -// Board-level registers and communication channel registers -//------------------------------------------------------------------ -#define BOARD_CORE_SIZE ADDR(0x100) - -#define BOARD_ADDR_BASE SEGMENT_OFFSET_GLOBALS + (0 * BOARD_CORE_SIZE) -#define BOARD_ADDR_NAME0 BOARD_ADDR_BASE + ADDR_NAME0 -#define BOARD_ADDR_NAME1 BOARD_ADDR_BASE + ADDR_NAME1 -#define BOARD_ADDR_VERSION BOARD_ADDR_BASE + ADDR_VERSION -#define BOARD_ADDR_DUMMY BOARD_ADDR_BASE + ADDR(0xFF) - -#define COMM_ADDR_BASE SEGMENT_OFFSET_GLOBALS + (1 * BOARD_CORE_SIZE) -#define COMM_ADDR_NAME0 COMM_ADDR_BASE + ADDR_NAME0 -#define COMM_ADDR_NAME1 COMM_ADDR_BASE + ADDR_NAME1 -#define COMM_ADDR_VERSION COMM_ADDR_BASE + ADDR_VERSION - - -//------------------------------------------------------------------ -// Hashes segment. -//------------------------------------------------------------------ -#define HASH_CORE_SIZE ADDR(0x100) - -// addresses and codes common to all hash cores */ -#define ADDR_CTRL ADDR(0x8) -#define CTRL_INIT_CMD 1 -#define CTRL_NEXT_CMD 2 -#define ADDR_STATUS ADDR(0x9) -#define STATUS_READY_BIT 1 -#define STATUS_VALID_BIT 2 -#define ADDR_BLOCK ADDR(0x10) -#define ADDR_DIGEST ADDR(0x20) // except SHA512 - -// addresses and codes for the specific hash cores. -#define SHA1_ADDR_BASE SEGMENT_OFFSET_HASHES + (0 * HASH_CORE_SIZE) -#define SHA1_ADDR_NAME0 SHA1_ADDR_BASE + ADDR_NAME0 -#define SHA1_ADDR_NAME1 SHA1_ADDR_BASE + ADDR_NAME1 -#define SHA1_ADDR_VERSION SHA1_ADDR_BASE + ADDR_VERSION -#define SHA1_ADDR_CTRL SHA1_ADDR_BASE + ADDR_CTRL -#define SHA1_ADDR_STATUS SHA1_ADDR_BASE + ADDR_STATUS -#define SHA1_ADDR_BLOCK SHA1_ADDR_BASE + ADDR_BLOCK -#define SHA1_ADDR_DIGEST SHA1_ADDR_BASE + ADDR_DIGEST -#define SHA1_BLOCK_LEN bitsToBytes(512) -#define SHA1_LENGTH_LEN bitsToBytes(64) -#define SHA1_DIGEST_LEN bitsToBytes(160) - -#define SHA256_ADDR_BASE SEGMENT_OFFSET_HASHES + (1 * HASH_CORE_SIZE) -#define SHA256_ADDR_NAME0 SHA256_ADDR_BASE + ADDR_NAME0 -#define SHA256_ADDR_NAME1 SHA256_ADDR_BASE + ADDR_NAME1 -#define SHA256_ADDR_VERSION SHA256_ADDR_BASE + ADDR_VERSION -#define SHA256_ADDR_CTRL SHA256_ADDR_BASE + ADDR_CTRL -#define SHA256_ADDR_STATUS SHA256_ADDR_BASE + ADDR_STATUS -#define SHA256_ADDR_BLOCK SHA256_ADDR_BASE + ADDR_BLOCK -#define SHA256_ADDR_DIGEST SHA256_ADDR_BASE + ADDR_DIGEST -#define SHA256_BLOCK_LEN bitsToBytes(512) -#define SHA256_LENGTH_LEN bitsToBytes(64) -#define SHA256_DIGEST_LEN bitsToBytes(256) - -#define SHA512_ADDR_BASE SEGMENT_OFFSET_HASHES + (2 * HASH_CORE_SIZE) -#define SHA512_ADDR_NAME0 SHA512_ADDR_BASE + ADDR_NAME0 -#define SHA512_ADDR_NAME1 SHA512_ADDR_BASE + ADDR_NAME1 -#define SHA512_ADDR_VERSION SHA512_ADDR_BASE + ADDR_VERSION -#define SHA512_ADDR_CTRL SHA512_ADDR_BASE + ADDR_CTRL -#define SHA512_ADDR_STATUS SHA512_ADDR_BASE + ADDR_STATUS -#define SHA512_ADDR_BLOCK SHA512_ADDR_BASE + ADDR_BLOCK -#define SHA512_ADDR_DIGEST SHA512_ADDR_BASE + ADDR(0x40) -#define SHA512_BLOCK_LEN bitsToBytes(1024) -#define SHA512_LENGTH_LEN bitsToBytes(128) -#define SHA512_224_DIGEST_LEN bitsToBytes(224) -#define SHA512_256_DIGEST_LEN bitsToBytes(256) -#define SHA384_DIGEST_LEN bitsToBytes(384) -#define SHA512_DIGEST_LEN bitsToBytes(512) -#define MODE_SHA_512_224 0 << 2 -#define MODE_SHA_512_256 1 << 2 -#define MODE_SHA_384 2 << 2 -#define MODE_SHA_512 3 << 2 - - -// ----------------------------------------------------------------- -// TRNG segment. -// ----------------------------------------------------------------- -#define TRNG_CORE_SIZE ADDR(0x100) - -// addresses and codes for the TRNG cores */ -#define TRNG_ADDR_BASE SEGMENT_OFFSET_RNGS + (0 * TRNG_CORE_SIZE) -#define TRNG_ADDR_NAME0 TRNG_ADDR_BASE + ADDR_NAME0 -#define TRNG_ADDR_NAME1 TRNG_ADDR_BASE + ADDR_NAME1 -#define TRNG_ADDR_VERSION TRNG_ADDR_BASE + ADDR_VERSION -#define TRNG_ADDR_CTRL TRNG_ADDR_BASE + ADDR(0x10) -#define TRNG_CTRL_DISCARD 1 -#define TRNG_CTRL_TEST_MODE 2 -#define TRNG_ADDR_STATUS TRNG_ADDR_BASE + ADDR(0x11) -// no status bits defined (yet) -#define TRNG_ADDR_DELAY TRNG_ADDR_BASE + ADDR(0x13) - -#define ENTROPY1_ADDR_BASE SEGMENT_OFFSET_RNGS + (5 * TRNG_CORE_SIZE) -#define ENTROPY1_ADDR_NAME0 ENTROPY1_ADDR_BASE + ADDR_NAME0 -#define ENTROPY1_ADDR_NAME1 ENTROPY1_ADDR_BASE + ADDR_NAME1 -#define ENTROPY1_ADDR_VERSION ENTROPY1_ADDR_BASE + ADDR_VERSION -#define ENTROPY1_ADDR_CTRL ENTROPY1_ADDR_BASE + ADDR(0x10) -#define ENTROPY1_CTRL_ENABLE 1 -#define ENTROPY1_ADDR_STATUS ENTROPY1_ADDR_BASE + ADDR(0x11) -#define ENTROPY1_STATUS_VALID 1 -#define ENTROPY1_ADDR_ENTROPY ENTROPY1_ADDR_BASE + ADDR(0x20) -#define ENTROPY1_ADDR_DELTA ENTROPY1_ADDR_BASE + ADDR(0x30) - -#define ENTROPY2_ADDR_BASE SEGMENT_OFFSET_RNGS + (6 * TRNG_CORE_SIZE) -#define ENTROPY2_ADDR_NAME0 ENTROPY2_ADDR_BASE + ADDR_NAME0 -#define ENTROPY2_ADDR_NAME1 ENTROPY2_ADDR_BASE + ADDR_NAME1 -#define ENTROPY2_ADDR_VERSION ENTROPY2_ADDR_BASE + ADDR_VERSION -#define ENTROPY2_ADDR_CTRL ENTROPY2_ADDR_BASE + ADDR(0x10) -#define ENTROPY2_CTRL_ENABLE 1 -#define ENTROPY2_ADDR_STATUS ENTROPY2_ADDR_BASE + ADDR(0x11) -#define ENTROPY2_STATUS_VALID 1 -#define ENTROPY2_ADDR_OPA ENTROPY2_ADDR_BASE + ADDR(0x18) -#define ENTROPY2_ADDR_OPB ENTROPY2_ADDR_BASE + ADDR(0x19) -#define ENTROPY2_ADDR_ENTROPY ENTROPY2_ADDR_BASE + ADDR(0x20) -#define ENTROPY2_ADDR_RAW ENTROPY2_ADDR_BASE + ADDR(0x21) -#define ENTROPY2_ADDR_ROSC ENTROPY2_ADDR_BASE + ADDR(0x22) - -#define MIXER_ADDR_BASE SEGMENT_OFFSET_RNGS + (0x0a * TRNG_CORE_SIZE) -#define MIXER_ADDR_NAME0 MIXER_ADDR_BASE + ADDR_NAME0 -#define MIXER_ADDR_NAME1 MIXER_ADDR_BASE + ADDR_NAME1 -#define MIXER_ADDR_VERSION MIXER_ADDR_BASE + ADDR_VERSION -#define MIXER_ADDR_CTRL MIXER_ADDR_BASE + ADDR(0x10) -#define MIXER_CTRL_ENABLE 1 -#define MIXER_CTRL_RESTART 2 -#define MIXER_ADDR_STATUS MIXER_ADDR_BASE + ADDR(0x11) -// no status bits defined (yet) -#define MIXER_ADDR_TIMEOUT MIXER_ADDR_BASE + ADDR(0x20) - -#define CSPRNG_ADDR_BASE SEGMENT_OFFSET_RNGS + (0x0b * TRNG_CORE_SIZE) -#define CSPRNG_ADDR_NAME0 CSPRNG_ADDR_BASE + ADDR_NAME0 -#define CSPRNG_ADDR_NAME1 CSPRNG_ADDR_BASE + ADDR_NAME1 -#define CSPRNG_ADDR_VERSION CSPRNG_ADDR_BASE + ADDR_VERSION -#define CSPRNG_ADDR_CTRL CSPRNG_ADDR_BASE + ADDR(0x10) -#define CSPRNG_CTRL_ENABLE 1 -#define CSPRNG_CTRL_SEED 2 -#define CSPRNG_ADDR_STATUS CSPRNG_ADDR_BASE + ADDR(0x11) -#define CSPRNG_STATUS_VALID 1 -#define CSPRNG_ADDR_RANDOM CSPRNG_ADDR_BASE + ADDR(0x20) -#define CSPRNG_ADDR_NROUNDS CSPRNG_ADDR_BASE + ADDR(0x40) -#define CSPRNG_ADDR_NBLOCKS_LO CSPRNG_ADDR_BASE + ADDR(0x41) -#define CSPRNG_ADDR_NBLOCKS_HI CSPRNG_ADDR_BASE + ADDR(0x42) - -//====================================================================== -// EOF cryptech_memory_map.h -//====================================================================== diff --git a/i2c/sw/hash_i2c.c b/i2c/sw/hash_i2c.c deleted file mode 100644 index 3a9f0cf..0000000 --- a/i2c/sw/hash_i2c.c +++ /dev/null @@ -1,288 +0,0 @@ -/* - * hash.c - * ------ - * This program uses the coretest_hashes subsystem to produce a - * cryptographic hash of a file or input stream. It is a generalization - * of the hash_tester.c test program. - * - * Authors: Joachim Strömbergson, Paul Selkirk - * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * - Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * - Neither the name of the NORDUnet nor the names of its contributors may - * be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A - * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED - * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <string.h> -#include <stdio.h> -#include <stdlib.h> -#include <fcntl.h> -#include <unistd.h> -#include <sys/time.h> -#include <stdint.h> -#include <arpa/inet.h> -#include <assert.h> - -#include "tc_i2c.h" -#include "cryptech_memory_map.h" - -char *usage = -"Usage: %s [-d] [-v] [-q] [algorithm [file]]\n" -"algorithms: sha-1, sha-256, sha-512/224, sha-512/256, sha-384, sha-512\n"; - -int debug = 0; -int quiet = 0; -int verbose = 0; - - -/* ---------------- algorithm lookup code ---------------- */ - -struct ctrl { - char *name; - off_t block_addr; - int block_len; - off_t digest_addr; - int digest_len; - int mode; -} ctrl[] = { - { "sha-1", SHA1_ADDR_BLOCK, SHA1_BLOCK_LEN, - SHA1_ADDR_DIGEST, SHA1_DIGEST_LEN, 0 }, - { "sha-256", SHA256_ADDR_BLOCK, SHA256_BLOCK_LEN, - SHA256_ADDR_DIGEST, SHA256_DIGEST_LEN, 0 }, - { "sha-512/224", SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN, - SHA512_ADDR_DIGEST, SHA512_224_DIGEST_LEN, MODE_SHA_512_224 }, - { "sha-512/256", SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN, - SHA512_ADDR_DIGEST, SHA512_256_DIGEST_LEN, MODE_SHA_512_256 }, - { "sha-384", SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN, - SHA512_ADDR_DIGEST, SHA384_DIGEST_LEN, MODE_SHA_384 }, - { "sha-512", SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN, - SHA512_ADDR_DIGEST, SHA512_DIGEST_LEN, MODE_SHA_512 }, - { NULL, 0, 0, 0 } -}; - -/* return the control structure for the given algorithm */ -struct ctrl *find_algo(char *algo) -{ - int i; - - for (i = 0; ctrl[i].name != NULL; ++i) - if (strcmp(ctrl[i].name, algo) == 0) - return &ctrl[i]; - - fprintf(stderr, "algorithm \"%s\" not found\n\n", algo); - fprintf(stderr, usage, "hash"); - return NULL; -} - -/* ---------------- hash ---------------- */ - -int transmit(off_t offset, uint8_t *block, int blen, int mode, int first) -{ - off_t base = offset & ~(0x1ff); - uint8_t ctrl_cmd[4] = { 0 }; - - if (tc_write(offset, block, blen) != 0) - return 1; - - ctrl_cmd[3] = (first ? CTRL_INIT_CMD : CTRL_NEXT_CMD) | mode; - - return - tc_write(base + ADDR_CTRL, ctrl_cmd, 4) || - tc_wait_ready(base + ADDR_STATUS); -} - -int pad_transmit(off_t offset, uint8_t *block, uint8_t flen, uint8_t blen, - uint8_t mode, long long tlen, int first) -{ - assert(flen < blen); - - block[flen++] = 0x80; - memset(block + flen, 0, blen - flen); - - if (blen - flen < ((blen == 64) ? 8 : 16)) { - if (transmit(offset, block, blen, mode, first) != 0) - return 1; - first = 0; - memset(block, 0, blen); - } - - /* properly the length is 128 bits for sha-512, but we can't - * actually count above 64 bits - */ - ((uint32_t *)block)[blen/4 - 2] = htonl((tlen >> 32) & 0xffff); - ((uint32_t *)block)[blen/4 - 1] = htonl(tlen & 0xffff); - - return transmit(offset, block, blen, mode, first); -} - -/* return number of digest bytes read */ -int hash(char *algo, char *file, uint8_t *digest) -{ - uint8_t block[SHA512_BLOCK_LEN]; - struct ctrl *ctrl; - int in_fd = 0; /* stdin */ - off_t baddr, daddr; - int blen, dlen, mode; - int nblk, nread, first; - int ret = -1; - struct timeval start, stop, difftime; - - ctrl = find_algo(algo); - if (ctrl == NULL) - return -1; - baddr = ctrl->block_addr; - blen = ctrl->block_len; - daddr = ctrl->digest_addr; - dlen = ctrl->digest_len; - mode = ctrl->mode; - - if (strcmp(file, "-") != 0) { - in_fd = open(file, O_RDONLY); - if (in_fd < 0) { - perror("open"); - return -1; - } - } - - if (verbose) { - if (gettimeofday(&start, NULL) < 0) { - perror("gettimeofday"); - goto out; - } - } - - for (nblk = 0, first = 1; ; ++nblk, first = 0) { - nread = read(in_fd, block, blen); - if (nread < 0) { - /* read error */ - perror("read"); - goto out; - } - else if (nread < blen) { - /* partial read = last block */ - if (pad_transmit(baddr, block, nread, blen, mode, - (nblk * blen + nread) * 8, first) != 0) - goto out; - break; - } - else { - /* full block read */ - if (transmit(baddr, block, blen, mode, first) != 0) - goto out; - } - } - - /* Strictly speaking we should query "valid" status before reading digest, - * but transmit() waits for "ready" status before returning, and the SHA - * cores always assert valid before ready. - */ - if (tc_read(daddr, digest, dlen) != 0) { - perror("i2c read failed"); - goto out; - } - - if (verbose) { - if (gettimeofday(&stop, NULL) < 0) { - perror("gettimeofday"); - goto out; - } - timersub(&stop, &start, &difftime); - printf("%d blocks written in %d.%03d sec (%.3f blocks/sec)\n", - nblk, (int)difftime.tv_sec, (int)difftime.tv_usec/1000, - (float)nblk / ((float)difftime.tv_sec + ((float)difftime.tv_usec)/1000000)); - } - - ret = dlen; -out: - if (in_fd != 0) - close(in_fd); - return ret; -} - -/* ---------------- main ---------------- */ - -int main(int argc, char *argv[]) -{ - int i, opt; - char *algo = "sha-1"; - char *file = "-"; - uint8_t digest[512/8]; - int dlen; - - while ((opt = getopt(argc, argv, "h?dvq")) != -1) { - switch (opt) { - case 'h': - case '?': - printf(usage, argv[0]); - return EXIT_SUCCESS; - case 'd': - debug = 1; - break; - case 'v': - verbose = 1; - break; - case 'q': - quiet = 1; - break; - default: - fprintf(stderr, usage, argv[0]); - return EXIT_FAILURE; - } - } - - if (optind < argc) { - algo = argv[optind]; - ++optind; - } - else { - if (!quiet) - printf("defaulting to algorithm \"%s\"\n", algo); - } - - if (optind < argc) { - file = argv[optind]; - ++optind; - } - else { - if (!quiet) - printf("reading from stdin\n"); - } - - dlen = hash(algo, file, digest); - if (dlen < 0) - return EXIT_FAILURE; - - for (i = 0; i < dlen; ++i) { - printf("%02x", digest[i]); - if (i % 16 == 15) - printf("\n"); - else if (i % 4 == 3) - printf(" "); - } - if (dlen % 16 != 0) - printf("\n"); - - return EXIT_SUCCESS; -} diff --git a/i2c/sw/hash_tester_i2c.c b/i2c/sw/hash_tester_i2c.c deleted file mode 100644 index 41a117e..0000000 --- a/i2c/sw/hash_tester_i2c.c +++ /dev/null @@ -1,634 +0,0 @@ -/* - * hash_tester.c - * -------------- - * This program sends several commands to the coretest_hashes subsystem - * in order to verify the SHA-1, SHA-256 and SHA-512/x hash function - * cores. - * - * Note: This version of the program talks to the FPGA over an I2C bus. - * - * The single and dual block test cases are taken from the - * NIST KAT document: - * http://csrc.nist.gov/groups/ST/toolkit/documents/Examples/SHA_All.pdf - * - * - * Authors: Joachim Strömbergson, Paul Selkirk - * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * - Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * - Neither the name of the NORDUnet nor the names of its contributors may - * be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A - * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED - * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <string.h> -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <time.h> -#include <stdint.h> -#include <ctype.h> - -#include "tc_i2c.h" -#include "cryptech_memory_map.h" - -int debug = 0; -int quiet = 0; - - -/* SHA-1/SHA-256 One Block Message Sample - Input Message: "abc" */ -const uint8_t NIST_512_SINGLE[] = -{ 0x61, 0x62, 0x63, 0x80, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18 }; - -const uint8_t SHA1_SINGLE_DIGEST[] = -{ 0xa9, 0x99, 0x3e, 0x36, 0x47, 0x06, 0x81, 0x6a, - 0xba, 0x3e, 0x25, 0x71, 0x78, 0x50, 0xc2, 0x6c, - 0x9c, 0xd0, 0xd8, 0x9d }; - -const uint8_t SHA256_SINGLE_DIGEST[] = -{ 0xBA, 0x78, 0x16, 0xBF, 0x8F, 0x01, 0xCF, 0xEA, - 0x41, 0x41, 0x40, 0xDE, 0x5D, 0xAE, 0x22, 0x23, - 0xB0, 0x03, 0x61, 0xA3, 0x96, 0x17, 0x7A, 0x9C, - 0xB4, 0x10, 0xFF, 0x61, 0xF2, 0x00, 0x15, 0xAD }; - -/* SHA-1/SHA-256 Two Block Message Sample - Input Message: "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq" */ -const uint8_t NIST_512_DOUBLE0[] = -{ 0x61, 0x62, 0x63, 0x64, 0x62, 0x63, 0x64, 0x65, - 0x63, 0x64, 0x65, 0x66, 0x64, 0x65, 0x66, 0x67, - 0x65, 0x66, 0x67, 0x68, 0x66, 0x67, 0x68, 0x69, - 0x67, 0x68, 0x69, 0x6A, 0x68, 0x69, 0x6A, 0x6B, - 0x69, 0x6A, 0x6B, 0x6C, 0x6A, 0x6B, 0x6C, 0x6D, - 0x6B, 0x6C, 0x6D, 0x6E, 0x6C, 0x6D, 0x6E, 0x6F, - 0x6D, 0x6E, 0x6F, 0x70, 0x6E, 0x6F, 0x70, 0x71, - 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; -const uint8_t NIST_512_DOUBLE1[] = -{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xC0 }; - -const uint8_t SHA1_DOUBLE_DIGEST[] = -{ 0x84, 0x98, 0x3E, 0x44, 0x1C, 0x3B, 0xD2, 0x6E, - 0xBA, 0xAE, 0x4A, 0xA1, 0xF9, 0x51, 0x29, 0xE5, - 0xE5, 0x46, 0x70, 0xF1 }; - -const uint8_t SHA256_DOUBLE_DIGEST[] = -{ 0x24, 0x8D, 0x6A, 0x61, 0xD2, 0x06, 0x38, 0xB8, - 0xE5, 0xC0, 0x26, 0x93, 0x0C, 0x3E, 0x60, 0x39, - 0xA3, 0x3C, 0xE4, 0x59, 0x64, 0xFF, 0x21, 0x67, - 0xF6, 0xEC, 0xED, 0xD4, 0x19, 0xDB, 0x06, 0xC1 }; - -/* SHA-512 One Block Message Sample - Input Message: "abc" */ -const uint8_t NIST_1024_SINGLE[] = -{ 0x61, 0x62, 0x63, 0x80, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18 }; - -const uint8_t SHA512_224_SINGLE_DIGEST[] = -{ 0x46, 0x34, 0x27, 0x0f, 0x70, 0x7b, 0x6a, 0x54, - 0xda, 0xae, 0x75, 0x30, 0x46, 0x08, 0x42, 0xe2, - 0x0e, 0x37, 0xed, 0x26, 0x5c, 0xee, 0xe9, 0xa4, - 0x3e, 0x89, 0x24, 0xaa }; -const uint8_t SHA512_256_SINGLE_DIGEST[] = -{ 0x53, 0x04, 0x8e, 0x26, 0x81, 0x94, 0x1e, 0xf9, - 0x9b, 0x2e, 0x29, 0xb7, 0x6b, 0x4c, 0x7d, 0xab, - 0xe4, 0xc2, 0xd0, 0xc6, 0x34, 0xfc, 0x6d, 0x46, - 0xe0, 0xe2, 0xf1, 0x31, 0x07, 0xe7, 0xaf, 0x23 }; -const uint8_t SHA384_SINGLE_DIGEST[] = -{ 0xcb, 0x00, 0x75, 0x3f, 0x45, 0xa3, 0x5e, 0x8b, - 0xb5, 0xa0, 0x3d, 0x69, 0x9a, 0xc6, 0x50, 0x07, - 0x27, 0x2c, 0x32, 0xab, 0x0e, 0xde, 0xd1, 0x63, - 0x1a, 0x8b, 0x60, 0x5a, 0x43, 0xff, 0x5b, 0xed, - 0x80, 0x86, 0x07, 0x2b, 0xa1, 0xe7, 0xcc, 0x23, - 0x58, 0xba, 0xec, 0xa1, 0x34, 0xc8, 0x25, 0xa7 }; -const uint8_t SHA512_SINGLE_DIGEST[] = -{ 0xdd, 0xaf, 0x35, 0xa1, 0x93, 0x61, 0x7a, 0xba, - 0xcc, 0x41, 0x73, 0x49, 0xae, 0x20, 0x41, 0x31, - 0x12, 0xe6, 0xfa, 0x4e, 0x89, 0xa9, 0x7e, 0xa2, - 0x0a, 0x9e, 0xee, 0xe6, 0x4b, 0x55, 0xd3, 0x9a, - 0x21, 0x92, 0x99, 0x2a, 0x27, 0x4f, 0xc1, 0xa8, - 0x36, 0xba, 0x3c, 0x23, 0xa3, 0xfe, 0xeb, 0xbd, - 0x45, 0x4d, 0x44, 0x23, 0x64, 0x3c, 0xe8, 0x0e, - 0x2a, 0x9a, 0xc9, 0x4f, 0xa5, 0x4c, 0xa4, 0x9f }; - -/* SHA-512 Two Block Message Sample - Input Message: "abcdefghbcdefghicdefghijdefghijkefghijklfghijklmghijklmn" - "hijklmnoijklmnopjklmnopqklmnopqrlmnopqrsmnopqrstnopqrstu" */ -const uint8_t NIST_1024_DOUBLE0[] = -{ 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, - 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, - 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, - 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, - 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, - 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, - 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, - 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, - 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70, - 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70, 0x71, - 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72, - 0x6c, 0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73, - 0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, - 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, - 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; -const uint8_t NIST_1024_DOUBLE1[] = -{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x80 }; - -const uint8_t SHA512_224_DOUBLE_DIGEST[] = -{ 0x23, 0xfe, 0xc5, 0xbb, 0x94, 0xd6, 0x0b, 0x23, - 0x30, 0x81, 0x92, 0x64, 0x0b, 0x0c, 0x45, 0x33, - 0x35, 0xd6, 0x64, 0x73, 0x4f, 0xe4, 0x0e, 0x72, - 0x68, 0x67, 0x4a, 0xf9 }; -const uint8_t SHA512_256_DOUBLE_DIGEST[] = -{ 0x39, 0x28, 0xe1, 0x84, 0xfb, 0x86, 0x90, 0xf8, - 0x40, 0xda, 0x39, 0x88, 0x12, 0x1d, 0x31, 0xbe, - 0x65, 0xcb, 0x9d, 0x3e, 0xf8, 0x3e, 0xe6, 0x14, - 0x6f, 0xea, 0xc8, 0x61, 0xe1, 0x9b, 0x56, 0x3a }; -const uint8_t SHA384_DOUBLE_DIGEST[] = -{ 0x09, 0x33, 0x0c, 0x33, 0xf7, 0x11, 0x47, 0xe8, - 0x3d, 0x19, 0x2f, 0xc7, 0x82, 0xcd, 0x1b, 0x47, - 0x53, 0x11, 0x1b, 0x17, 0x3b, 0x3b, 0x05, 0xd2, - 0x2f, 0xa0, 0x80, 0x86, 0xe3, 0xb0, 0xf7, 0x12, - 0xfc, 0xc7, 0xc7, 0x1a, 0x55, 0x7e, 0x2d, 0xb9, - 0x66, 0xc3, 0xe9, 0xfa, 0x91, 0x74, 0x60, 0x39 }; -const uint8_t SHA512_DOUBLE_DIGEST[] = -{ 0x8e, 0x95, 0x9b, 0x75, 0xda, 0xe3, 0x13, 0xda, - 0x8c, 0xf4, 0xf7, 0x28, 0x14, 0xfc, 0x14, 0x3f, - 0x8f, 0x77, 0x79, 0xc6, 0xeb, 0x9f, 0x7f, 0xa1, - 0x72, 0x99, 0xae, 0xad, 0xb6, 0x88, 0x90, 0x18, - 0x50, 0x1d, 0x28, 0x9e, 0x49, 0x00, 0xf7, 0xe4, - 0x33, 0x1b, 0x99, 0xde, 0xc4, 0xb5, 0x43, 0x3a, - 0xc7, 0xd3, 0x29, 0xee, 0xb6, 0xdd, 0x26, 0x54, - 0x5e, 0x96, 0xe5, 0x5b, 0x87, 0x4b, 0xe9, 0x09 }; - -/* ---------------- sanity test case ---------------- */ - -int TC0() -{ - uint8_t board_name0[4] = "PVT1"; - uint8_t board_name1[4] = " "; - uint8_t board_version[4] = "0.10"; - - uint8_t comm_name0[4] = "i2c "; - uint8_t comm_name1[4] = " "; - uint8_t comm_version[4] = "0.10"; - - uint8_t t[4]; - - if (!quiet) - printf("TC0-1: Reading board type, version, and dummy reg from global registers.\n"); - - /* write current time into dummy register, then try to read it back - * to make sure that we can actually write something into EIM - */ - (void)time((time_t *)t); - if (tc_write(BOARD_ADDR_DUMMY, t, 4) != 0) - return 1; - - if (tc_expected(BOARD_ADDR_NAME0, board_name0, 4) || - tc_expected(BOARD_ADDR_NAME1, board_name1, 4) || - tc_expected(BOARD_ADDR_VERSION, board_version, 4) || - tc_expected(BOARD_ADDR_DUMMY, t, 4)) - return 1; - - if (!quiet) - printf("TC0-2: Reading name and version words from communications core.\n"); - - return - tc_expected(COMM_ADDR_NAME0, comm_name0, 4) || - tc_expected(COMM_ADDR_NAME1, comm_name1, 4) || - tc_expected(COMM_ADDR_VERSION, comm_version, 4); -} - -/* ---------------- SHA-1 test cases ---------------- */ - -/* TC1: Read name and version from SHA-1 core. */ -int TC1(void) -{ - uint8_t name0[4] = "sha1"; - uint8_t name1[4] = " "; - uint8_t version[4] = "0.50"; - - if (!quiet) - printf("TC1: Reading name and version words from SHA-1 core.\n"); - - return - tc_expected(SHA1_ADDR_NAME0, name0, 4) || - tc_expected(SHA1_ADDR_NAME1, name1, 4) || - tc_expected(SHA1_ADDR_VERSION, version, 4); -} - -/* TC2: SHA-1 Single block message test as specified by NIST. */ -int TC2(void) -{ - const uint8_t *block = NIST_512_SINGLE; - const uint8_t *expected = SHA1_SINGLE_DIGEST; - int ret; - - if (!quiet) - printf("TC2: Single block message test for SHA-1.\n"); - - /* Write block to SHA-1. */ - tc_write(SHA1_ADDR_BLOCK, block, SHA1_BLOCK_LEN); - /* Start initial block hashing, wait and check status. */ - tc_init(SHA1_ADDR_CTRL); - tc_wait_valid(SHA1_ADDR_STATUS); - /* Extract the digest. */ - ret = tc_expected(SHA1_ADDR_DIGEST, expected, SHA1_DIGEST_LEN); - return ret; -} - -/* TC3: SHA-1 Double block message test as specified by NIST. */ -int TC3(void) -{ - const uint8_t *block[2] = { NIST_512_DOUBLE0, NIST_512_DOUBLE1 }; - static const uint8_t block0_expected[] = - { 0xF4, 0x28, 0x68, 0x18, 0xC3, 0x7B, 0x27, 0xAE, - 0x04, 0x08, 0xF5, 0x81, 0x84, 0x67, 0x71, 0x48, - 0x4A, 0x56, 0x65, 0x72 }; - const uint8_t *expected = SHA1_DOUBLE_DIGEST; - int ret; - - if (!quiet) - printf("TC3: Double block message test for SHA-1.\n"); - - /* Write first block to SHA-1. */ - tc_write(SHA1_ADDR_BLOCK, block[0], SHA1_BLOCK_LEN); - /* Start initial block hashing, wait and check status. */ - tc_init(SHA1_ADDR_CTRL); - tc_wait_valid(SHA1_ADDR_STATUS); - /* Extract the first digest. */ - tc_expected(SHA1_ADDR_DIGEST, block0_expected, SHA1_DIGEST_LEN); - /* Write second block to SHA-1. */ - tc_write(SHA1_ADDR_BLOCK, block[1], SHA1_BLOCK_LEN); - /* Start next block hashing, wait and check status. */ - tc_next(SHA1_ADDR_CTRL); - tc_wait_valid(SHA1_ADDR_STATUS); - /* Extract the second digest. */ - ret = tc_expected(SHA1_ADDR_DIGEST, expected, SHA1_DIGEST_LEN); - return ret; -} - -/* ---------------- SHA-256 test cases ---------------- */ - -/* TC4: Read name and version from SHA-256 core. */ -int TC4(void) -{ - uint8_t name0[4] = "sha2"; - uint8_t name1[4] = "-256"; - uint8_t version[4] = "0.80"; - - if (!quiet) - printf("TC4: Reading name, type and version words from SHA-256 core.\n"); - - return - tc_expected(SHA256_ADDR_NAME0, name0, 4) || - tc_expected(SHA256_ADDR_NAME1, name1, 4) || - tc_expected(SHA256_ADDR_VERSION, version, 4); -} - -/* TC5: SHA-256 Single block message test as specified by NIST. */ -int TC5() -{ - const uint8_t *block = NIST_512_SINGLE; - const uint8_t *expected = SHA256_SINGLE_DIGEST; - - if (!quiet) - printf("TC5: Single block message test for SHA-256.\n"); - - return - /* Write block to SHA-256. */ - tc_write(SHA256_ADDR_BLOCK, block, SHA256_BLOCK_LEN) || - /* Start initial block hashing, wait and check status. */ - tc_init(SHA256_ADDR_CTRL) || - tc_wait_valid(SHA256_ADDR_STATUS) || - /* Extract the digest. */ - tc_expected(SHA256_ADDR_DIGEST, expected, SHA256_DIGEST_LEN); -} - -/* TC6: SHA-256 Double block message test as specified by NIST. */ -int TC6() -{ - const uint8_t *block[2] = { NIST_512_DOUBLE0, NIST_512_DOUBLE1 }; - static const uint8_t block0_expected[] = - { 0x85, 0xE6, 0x55, 0xD6, 0x41, 0x7A, 0x17, 0x95, - 0x33, 0x63, 0x37, 0x6A, 0x62, 0x4C, 0xDE, 0x5C, - 0x76, 0xE0, 0x95, 0x89, 0xCA, 0xC5, 0xF8, 0x11, - 0xCC, 0x4B, 0x32, 0xC1, 0xF2, 0x0E, 0x53, 0x3A }; - const uint8_t *expected = SHA256_DOUBLE_DIGEST; - - if (!quiet) - printf("TC6: Double block message test for SHA-256.\n"); - - return - /* Write first block to SHA-256. */ - tc_write(SHA256_ADDR_BLOCK, block[0], SHA256_BLOCK_LEN) || - /* Start initial block hashing, wait and check status. */ - tc_init(SHA256_ADDR_CTRL) || - tc_wait_valid(SHA256_ADDR_STATUS) || - /* Extract the first digest. */ - tc_expected(SHA256_ADDR_DIGEST, block0_expected, SHA256_DIGEST_LEN) || - /* Write second block to SHA-256. */ - tc_write(SHA256_ADDR_BLOCK, block[1], SHA256_BLOCK_LEN) || - /* Start next block hashing, wait and check status. */ - tc_next(SHA256_ADDR_CTRL) || - tc_wait_valid(SHA256_ADDR_STATUS) || - /* Extract the second digest. */ - tc_expected(SHA256_ADDR_DIGEST, expected, SHA256_DIGEST_LEN); -} - -/* TC7: SHA-256 Huge message test. */ -int TC7() -{ - static const uint8_t block[] = - { 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef, - 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f, - 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef, - 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f, - 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef, - 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f, - 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef, - 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f }; - - /* final digest after 1000 iterations */ - static const uint8_t expected[] = - { 0x76, 0x38, 0xf3, 0xbc, 0x50, 0x0d, 0xd1, 0xa6, - 0x58, 0x6d, 0xd4, 0xd0, 0x1a, 0x15, 0x51, 0xaf, - 0xd8, 0x21, 0xd2, 0x35, 0x2f, 0x91, 0x9e, 0x28, - 0xd5, 0x84, 0x2f, 0xab, 0x03, 0xa4, 0x0f, 0x2a }; - - int i, n = 1000; - - if (!quiet) - printf("TC7: Message with %d blocks test for SHA-256.\n", n); - - /* Write block data to SHA-256. */ - if (tc_write(SHA256_ADDR_BLOCK, block, SHA256_BLOCK_LEN)) - return 1; - - /* Start initial block hashing, wait and check status. */ - if (tc_init(SHA256_ADDR_CTRL) || - tc_wait_ready(SHA256_ADDR_STATUS)) - return 1; - - /* First block done. Do the rest. */ - for (i = 1; i < n; ++i) { - /* Start next block hashing, wait and check status. */ - if (tc_next(SHA256_ADDR_CTRL) || - tc_wait_ready(SHA256_ADDR_STATUS)) - return 1; - } - - /* XXX valid is probably set at the same time as ready */ - if (tc_wait_valid(SHA256_ADDR_STATUS)) - return 1; - /* Extract the final digest. */ - return tc_expected(SHA256_ADDR_DIGEST, expected, SHA256_DIGEST_LEN); -} - -/* ---------------- SHA-512 test cases ---------------- */ - -/* TC8: Read name and version from SHA-512 core. */ -int TC8() -{ - uint8_t name0[4] = "sha2"; - uint8_t name1[4] = "-512"; - uint8_t version[4] = "0.80"; - - if (!quiet) - printf("TC8: Reading name, type and version words from SHA-512 core.\n"); - - return - tc_expected(SHA512_ADDR_NAME0, name0, 4) || - tc_expected(SHA512_ADDR_NAME1, name1, 4) || - tc_expected(SHA512_ADDR_VERSION, version, 4); -} - -/* TC9: SHA-512 Single block message test as specified by NIST. - We do this for all modes. */ -int tc9(int mode, const uint8_t *expected, int digest_len) -{ - const uint8_t *block = NIST_1024_SINGLE; - uint8_t init[4] = { 0, 0, 0, CTRL_INIT_CMD + mode }; - - return - /* Write block to SHA-512. */ - tc_write(SHA512_ADDR_BLOCK, block, SHA512_BLOCK_LEN) || - /* Start initial block hashing, wait and check status. */ - tc_write(SHA512_ADDR_CTRL, init, 4) || - tc_wait_valid(SHA512_ADDR_STATUS) || - /* Extract the digest. */ - tc_expected(SHA512_ADDR_DIGEST, expected, digest_len); -} - -int TC9() -{ - if (!quiet) - printf("TC9-1: Single block message test for SHA-512/224.\n"); - if (tc9(MODE_SHA_512_224, SHA512_224_SINGLE_DIGEST, SHA512_224_DIGEST_LEN) != 0) - return 1; - - if (!quiet) - printf("TC9-2: Single block message test for SHA-512/256.\n"); - if (tc9(MODE_SHA_512_256, SHA512_256_SINGLE_DIGEST, SHA512_256_DIGEST_LEN) != 0) - return 1; - - if (!quiet) - printf("TC9-3: Single block message test for SHA-384.\n"); - if (tc9(MODE_SHA_384, SHA384_SINGLE_DIGEST, SHA384_DIGEST_LEN) != 0) - return 1; - - if (!quiet) - printf("TC9-4: Single block message test for SHA-512.\n"); - if (tc9(MODE_SHA_512, SHA512_SINGLE_DIGEST, SHA512_DIGEST_LEN) != 0) - return 1; - - return 0; -} - -/* TC10: SHA-512 Double block message test as specified by NIST. - We do this for all modes. */ -int tc10(int mode, const uint8_t *expected, int digest_len) -{ - const uint8_t *block[2] = { NIST_1024_DOUBLE0, NIST_1024_DOUBLE1 }; - uint8_t init[4] = { 0, 0, 0, CTRL_INIT_CMD + mode }; - uint8_t next[4] = { 0, 0, 0, CTRL_NEXT_CMD + mode }; - - return - /* Write first block to SHA-512. */ - tc_write(SHA512_ADDR_BLOCK, block[0], SHA512_BLOCK_LEN) || - /* Start initial block hashing, wait and check status. */ - tc_write(SHA512_ADDR_CTRL, init, 4) || - tc_wait_ready(SHA512_ADDR_STATUS) || - /* Write second block to SHA-512. */ - tc_write(SHA512_ADDR_BLOCK, block[1], SHA512_BLOCK_LEN) || - /* Start next block hashing, wait and check status. */ - tc_write(SHA512_ADDR_CTRL, next, 4) || - tc_wait_valid(SHA512_ADDR_STATUS) || - /* Extract the digest. */ - tc_expected(SHA512_ADDR_DIGEST, expected, digest_len); -} - -int TC10() -{ - if (!quiet) - printf("TC10-1: Double block message test for SHA-512/224.\n"); - if (tc10(MODE_SHA_512_224, SHA512_224_DOUBLE_DIGEST, SHA512_224_DIGEST_LEN) != 0) - return 1; - - if (!quiet) - printf("TC10-2: Double block message test for SHA-512/256.\n"); - if (tc10(MODE_SHA_512_256, SHA512_256_DOUBLE_DIGEST, SHA512_256_DIGEST_LEN) != 0) - return 1; - - if (!quiet) - printf("TC10-3: Double block message test for SHA-384.\n"); - if (tc10(MODE_SHA_384, SHA384_DOUBLE_DIGEST, SHA384_DIGEST_LEN) != 0) - return 1; - - if (!quiet) - printf("TC10-4: Double block message test for SHA-512.\n"); - if (tc10(MODE_SHA_512, SHA512_DOUBLE_DIGEST, SHA512_DIGEST_LEN) != 0) - return 1; - - return 0; -} - -/* ---------------- main ---------------- */ - -int main(int argc, char *argv[]) -{ - typedef int (*tcfp)(void); - tcfp all_tests[] = { TC0, TC1, TC2, TC3, TC4, TC5, TC6, TC7, TC8, TC9, TC10 }; - tcfp sha1_tests[] = { TC1, TC2, TC3 }; - tcfp sha256_tests[] = { TC4, TC5, TC6, TC7 }; - tcfp sha512_tests[] = { TC8, TC9, TC10 }; - - char *usage = "Usage: %s [-h] [-d] [-q] tc...\n"; - int i, j, opt; - - while ((opt = getopt(argc, argv, "h?dq")) != -1) { - switch (opt) { - case 'h': - case '?': - printf(usage, argv[0]); - return EXIT_SUCCESS; - case 'd': - debug = 1; - break; - case 'q': - quiet = 1; - break; - default: - fprintf(stderr, usage, argv[0]); - return EXIT_FAILURE; - } - } - - /* no args == run all tests */ - if (optind >= argc) { - for (j = 0; j < sizeof(all_tests)/sizeof(all_tests[0]); ++j) - if (all_tests[j]() != 0) - return EXIT_FAILURE; - return EXIT_SUCCESS; - } - - /* run one or more tests (by number) or groups of tests (by name) */ - for (i = optind; i < argc; ++i) { - if (strcmp(argv[i], "all") == 0) { - for (j = 0; j < sizeof(all_tests)/sizeof(all_tests[0]); ++j) - if (all_tests[j]() != 0) - return EXIT_FAILURE; - } - else if (strcmp(argv[i], "sha1") == 0) { - for (j = 0; j < sizeof(sha1_tests)/sizeof(sha1_tests[0]); ++j) - if (sha1_tests[j]() != 0) - return EXIT_FAILURE; - } - else if (strcmp(argv[i], "sha256") == 0) { - for (j = 0; j < sizeof(sha256_tests)/sizeof(sha256_tests[0]); ++j) - if (sha256_tests[j]() != 0) - return EXIT_FAILURE; - } - else if (strcmp(argv[i], "sha512") == 0) { - for (j = 0; j < sizeof(sha512_tests)/sizeof(sha512_tests[0]); ++j) - if (sha512_tests[j]() != 0) - return EXIT_FAILURE; - } - else if (isdigit(argv[i][0]) && - (((j = atoi(argv[i])) >= 0) && - (j < sizeof(all_tests)/sizeof(all_tests[0])))) { - if (all_tests[j]() != 0) - return EXIT_FAILURE; - } - else { - fprintf(stderr, "unknown test case %s\n", argv[i]); - return EXIT_FAILURE; - } - } - - return EXIT_SUCCESS; -} diff --git a/i2c/sw/tc_i2c.h b/i2c/sw/tc_i2c.h deleted file mode 100644 index b1afae1..0000000 --- a/i2c/sw/tc_i2c.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * tc_i2c.h - * -------- - * This module contains common code to talk to the FPGA over the I2C bus. - * - * Author: Paul Selkirk - * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * - Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * - Neither the name of the NORDUnet nor the names of its contributors may - * be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A - * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED - * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* cryptech memory map */ -#define BASE_ADDR 0 -#define SEGMENT_SIZE 0x2000 -#define ADDR(x) (x) -#include "cryptech_memory_map.h" - -/* I2C configuration */ -#define I2C_dev "/dev/i2c-2" -#define I2C_addr 0x0f -#define I2C_SLAVE 0x0703 - -/* test case public functions */ -int tc_write(off_t offset, const uint8_t *data, size_t len); -int tc_read(off_t offset, uint8_t *data, size_t len); -int tc_expected(off_t offset, const uint8_t *data, size_t len); -int tc_init(off_t offset); -int tc_next(off_t offset); -int tc_wait(off_t offset, uint8_t status, int *count); -int tc_wait_ready(off_t offset); -int tc_wait_valid(off_t offset); diff --git a/i2c/sw/trng_extractor_i2c.c b/i2c/sw/trng_extractor_i2c.c deleted file mode 100644 index 7b3c2ef..0000000 --- a/i2c/sw/trng_extractor_i2c.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * trng_extractor.c - * ---------------- - * This program extracts raw data from the avalanche_entropy, rosc_entropy, - * and csprng cores. - * - * Author: Paul Selkirk - * Copyright (c) 2015, NORDUnet A/S All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * - Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * - Neither the name of the NORDUnet nor the names of its contributors may - * be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A - * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED - * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <stdint.h> -#include <ctype.h> - -#include "tc_i2c.h" -#include "cryptech_memory_map.h" - -char *usage = -"%s [-a|r|c] [-n #] [-o file]\n\ -\n\ --a avalanche entropy\n\ --r rosc entropy\n\ --c csprng (default data source)\n\ --n number of 4-byte samples (scale with K, M, or G suffix)\n\ --o output file (defaults to stdout)\n\ -"; - -int debug = 0; /* for dump() */ - -/* extract one data sample */ -static int extract(off_t status_addr, off_t data_addr, uint32_t *data) -{ -/* In theory, we should wait for "valid" before reading random - * data, but as long as this is running over I2C we're going to be so - * slow that there's no point, and checking would just make us slower. - */ -#define WAIT_FOR_TRNG_VALID 0 - -#if WAIT_FOR_TRNG_VALID - if (tc_wait(status_addr, ENTROPY1_STATUS_VALID, NULL) != 0) { - fprintf(stderr, "tc_wait failed\n"); - return 1; - } -#endif - - if (tc_read(data_addr, (uint8_t *)data, 4) != 0) { - fprintf(stderr, "tc_read failed\n"); - return 1; - } - - return 0; -} - -/* main */ -int main(int argc, char *argv[]) -{ - int i, opt; - unsigned long num_words = 1; - char *endptr; - off_t status_addr = CSPRNG_ADDR_STATUS; - off_t data_addr = CSPRNG_ADDR_RANDOM; - FILE *output = stdout; - uint32_t data; - - /* parse command line */ - while ((opt = getopt(argc, argv, "h?arcn:o:")) != -1) { - switch (opt) { - case 'h': - case '?': - printf(usage, argv[0]); - return EXIT_SUCCESS; - case 'a': - status_addr = ENTROPY1_ADDR_STATUS; - data_addr = ENTROPY1_ADDR_ENTROPY; - break; - case 'r': - status_addr = ENTROPY2_ADDR_STATUS; - data_addr = ENTROPY2_ADDR_ENTROPY; - break; - case 'c': - status_addr = CSPRNG_ADDR_STATUS; - data_addr = CSPRNG_ADDR_RANDOM; - break; - case 'n': - num_words = strtoul(optarg, &endptr, 10); - switch (toupper(*endptr)) { - case '\0': - break; - case 'K': - num_words *= 1000; - break; - case 'M': - num_words *= 1000000; - break; - case 'G': - num_words *= 1000000000; - break; - default: - fprintf(stderr, "unsupported -n suffix %s\n", endptr); - return EXIT_FAILURE; - } - break; - case 'o': - output = fopen(optarg, "wb+"); - if (output == NULL) { - fprintf(stderr, "error opening output file %s: ", optarg); - perror(""); - return EXIT_FAILURE; - } - break; - default: - errout: - fprintf(stderr, usage, argv[0]); - return EXIT_FAILURE; - } - } - if (optind < argc) { - fprintf(stderr, "%s: invalid argument%s --", - argv[0], argc - optind > 1 ? "s" : ""); - do { - fprintf(stderr, " %s", argv[optind]); - ++optind; - } while (optind < argc); - fprintf(stderr, "\n"); - goto errout; - } - - /* get the data */ - for (i = 0; i < num_words; ++i) { - if (extract(status_addr, data_addr, &data) != 0) - return EXIT_FAILURE; - if (fwrite(&data, sizeof(data), 1, output) != 1) { - perror("fwrite"); - fclose(output); - return EXIT_FAILURE; - } - } - - fclose(output); - return EXIT_SUCCESS; -} diff --git a/i2c/sw/trng_tester_i2c.c b/i2c/sw/trng_tester_i2c.c deleted file mode 100644 index 92b2c94..0000000 --- a/i2c/sw/trng_tester_i2c.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * trng_tester.c - * -------------- - * This program sends several commands to the TRNG subsystem - * in order to verify the avalanche_entropy, rosc_entropy, and csprng cores. - * - * Note: This version of the program talks to the FPGA over an I2C bus. - * - * - * Author: Paul Selkirk - * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * - Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * - Neither the name of the NORDUnet nor the names of its contributors may - * be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A - * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED - * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <string.h> -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <time.h> -#include <stdint.h> -#include <ctype.h> - -#include "tc_i2c.h" -#include "cryptech_memory_map.h" - -char *usage = "Usage: %s [-h] [-d] [-q] [-w] [-n #] tc...\n"; - -int debug = 0; -int quiet = 0; -int num_words = 10; -int wait_stats = 0; - -/* ---------------- sanity test case ---------------- */ - -int TC0() -{ - uint8_t board_name0[4] = "PVT1"; - uint8_t board_name1[4] = " "; - uint8_t board_version[4] = "0.10"; - - uint8_t comm_name0[4] = "i2c "; - uint8_t comm_name1[4] = " "; - uint8_t comm_version[4] = "0.10"; - - uint8_t t[4]; - - if (!quiet) - printf("TC0-1: Reading board type, version, and dummy reg from global registers.\n"); - - /* write current time into dummy register, then try to read it back - * to make sure that we can actually write something into EIM - */ - (void)time((time_t *)t); - if (tc_write(BOARD_ADDR_DUMMY, t, 4) != 0) - return 1; - - if (tc_expected(BOARD_ADDR_NAME0, board_name0, 4) || - tc_expected(BOARD_ADDR_NAME1, board_name1, 4) || - tc_expected(BOARD_ADDR_VERSION, board_version, 4) || - tc_expected(BOARD_ADDR_DUMMY, t, 4)) - return 1; - - if (!quiet) - printf("TC0-2: Reading name and version words from communications core.\n"); - - return - tc_expected(COMM_ADDR_NAME0, comm_name0, 4) || - tc_expected(COMM_ADDR_NAME1, comm_name1, 4) || - tc_expected(COMM_ADDR_VERSION, comm_version, 4); -} - -/* ---------------- trng test cases ---------------- */ - -/* TC1: Read name and version from trng core. */ -int TC1(void) -{ - uint8_t name0[4] = "trng"; - uint8_t name1[4] = " "; - uint8_t version[4] = "0.01"; - - if (!quiet) - printf("TC1: Reading name and version words from trng core.\n"); - - return - tc_expected(TRNG_ADDR_NAME0, name0, 4) || - tc_expected(TRNG_ADDR_NAME1, name1, 4) || - tc_expected(TRNG_ADDR_VERSION, version, 4); -} - -/* XXX test cases for setting blinkenlights? */ -/* XXX set 'discard' control bit, see if we read the same value */ - -/* ---------------- avalanche_entropy test cases ---------------- */ - -/* TC2: Read name and version from avalanche_entropy core. */ -int TC2(void) -{ - uint8_t name0[4] = "extn"; - uint8_t name1[4] = "oise"; - uint8_t version[4] = "0.10"; - - if (!quiet) - printf("TC2: Reading name and version words from avalanche_entropy core.\n"); - - return - tc_expected(ENTROPY1_ADDR_NAME0, name0, 4) || - tc_expected(ENTROPY1_ADDR_NAME1, name1, 4) || - tc_expected(ENTROPY1_ADDR_VERSION, version, 4); -} - -/* XXX clear 'enable' control bit, see if we read the same value */ - -/* TC3: Read random data from avalanche_entropy. */ -int TC3(void) -{ - int i, n; - uint32_t entropy; - - if (!quiet) - printf("TC3: Read random data from avalanche_entropy.\n"); - - for (i = 0; i < num_words; ++i) { - /* check status */ - n = 10; - if (tc_wait(ENTROPY1_ADDR_STATUS, ENTROPY1_STATUS_VALID, &n) != 0) - return 1; - /* read entropy data */ - if (tc_read(ENTROPY1_ADDR_ENTROPY, (uint8_t *)&entropy, 4) != 0) - return 1; - /* display entropy data */ - if (!debug) { - if (wait_stats) - printf("%08x %d\n", entropy, n); - else - printf("%08x\n", entropy); - } - } - - return 0; -} - -/* ---------------- rosc_entropy test cases ---------------- */ - -/* TC4: Read name and version from rosc_entropy core. */ -int TC4(void) -{ - uint8_t name0[4] = "rosc"; - uint8_t name1[4] = " ent"; - uint8_t version[4] = "0.10"; - - if (!quiet) - printf("TC4: Reading name and version words from rosc_entropy core.\n"); - - return - tc_expected(ENTROPY2_ADDR_NAME0, name0, 4) || - tc_expected(ENTROPY2_ADDR_NAME1, name1, 4) || - tc_expected(ENTROPY2_ADDR_VERSION, version, 4); -} - -/* XXX clear 'enable' control bit, see if we read the same value */ - -/* TC5: Read random data from rosc_entropy. */ -int TC5(void) -{ - int i, n; - uint32_t entropy; - - if (!quiet) - printf("TC5: Read random data from rosc_entropy.\n"); - - for (i = 0; i < num_words; ++i) { - /* check status */ - n = 10; - if (tc_wait(ENTROPY2_ADDR_STATUS, ENTROPY2_STATUS_VALID, &n) != 0) - return 1; - /* read entropy data */ - if (tc_read(ENTROPY2_ADDR_ENTROPY, (uint8_t *)&entropy, 4) != 0) - return 1; - /* display entropy data */ - if (!debug) { - if (wait_stats) - printf("%08x %d\n", entropy, n); - else - printf("%08x\n", entropy); - } - } - - return 0; -} - -/* ---------------- trng_csprng test cases ---------------- */ - -/* TC6: Read name and version from trng_csprng core. */ -int TC6(void) -{ - /* XXX csprng core currently doesn't have name/version registers */ - return 0; -} - -/* XXX clear 'enable' control bit, see if we read the same value */ -/* XXX set 'seed' control bit, see if we read the same value */ - -/* TC7: Read random data from trng_csprng. */ -int TC7(void) -{ - int i, n; - uint32_t random; - - if (!quiet) - printf("TC7: Read random data from trng_csprng.\n"); - - for (i = 0; i < num_words; ++i) { - /* check status */ - n = 10; - if (tc_wait(CSPRNG_ADDR_STATUS, CSPRNG_STATUS_VALID, &n) != 0) - return 1; - /* read random data */ - if (tc_read(CSPRNG_ADDR_RANDOM, (uint8_t *)&random, 4) != 0) - return 1; - /* display random data */ - if (!debug) { - if (wait_stats) - printf("%08x %d\n", random, n); - else - printf("%08x\n", random); - } - } - - return 0; -} - -/* ---------------- main ---------------- */ - -int main(int argc, char *argv[]) -{ - typedef int (*tcfp)(void); - tcfp all_tests[] = { TC0, TC1, TC2, TC3, TC4, TC5, TC6, TC7 }; - int i, j, opt; - - while ((opt = getopt(argc, argv, "h?dqn:w")) != -1) { - switch (opt) { - case 'h': - case '?': - printf(usage, argv[0]); - return EXIT_SUCCESS; - case 'd': - debug = 1; - break; - case 'q': - quiet = 1; - break; - case 'n': - num_words = atoi(optarg); - if (num_words <= 0) { - fprintf(stderr, "-n requires a positive integer argument\n"); - return EXIT_FAILURE; - } - break; - case 'w': - wait_stats = 1; - break; - default: - fprintf(stderr, usage, argv[0]); - return EXIT_FAILURE; - } - } - - /* no args == run all tests */ - if (optind >= argc) { - for (j = 0; j < sizeof(all_tests)/sizeof(all_tests[0]); ++j) - if (all_tests[j]() != 0) - return EXIT_FAILURE; - return EXIT_SUCCESS; - } - - /* run one or more tests (by number) or groups of tests (by name) */ - for (i = optind; i < argc; ++i) { - if (strcmp(argv[i], "all") == 0) { - for (j = 0; j < sizeof(all_tests)/sizeof(all_tests[0]); ++j) - if (all_tests[j]() != 0) - return EXIT_FAILURE; - } - else if (isdigit(argv[i][0]) && - (((j = atoi(argv[i])) >= 0) && - (j < sizeof(all_tests)/sizeof(all_tests[0])))) { - if (all_tests[j]() != 0) - return EXIT_FAILURE; - } - else { - fprintf(stderr, "unknown test case %s\n", argv[i]); - return EXIT_FAILURE; - } - } - - return EXIT_SUCCESS; -} diff --git a/sw/Makefile b/sw/Makefile new file mode 100755 index 0000000..93976d7 --- /dev/null +++ b/sw/Makefile @@ -0,0 +1,44 @@ +CC = gcc +CFLAGS = -Wall + +LIB = libcryptech.a +BIN = hash hash_tester trng_extractor trng_tester +INC = cryptech.h + +PREFIX = /usr/local +LIB_DIR = $(PREFIX)/lib +BIN_DIR = $(PREFIX)/bin +INC_DIR = $(PREFIX)/include + +all: $(LIB) $(BIN) + +%.o: %.c $(INC) + $(CC) $(CFLAGS) -c -o $@ $< + +libcryptech.a: tc_eim.o novena-eim.o + ar rcs $@ $^ + +hash_tester: hash_tester.o $(LIB) + $(CC) -o $@ $^ + +trng_tester: trng_tester.o $(LIB) + $(CC) -o $@ $^ + +hash: hash.o $(LIB) + $(CC) -o $@ $^ + +trng_extractor: trng_extractor.o $(LIB) + $(CC) -o $@ $^ + +install: $(LIB) $(BIN) $(INC) + install $(LIB) $(LIB_DIR) + install $(BIN) $(BIN_DIR) + install $(INC) $(INC_DIR) + +uninstall: + rm -f $(LIB_DIR)/$(LIB) + rm -f $(foreach bin,$(BIN),$(BIN_DIR)/$(bin)) + rm -f $(INC_DIR)/$(INC) + +clean: + rm -f *.o $(LIB) $(BIN) diff --git a/sw/Makefile.i2c b/sw/Makefile.i2c new file mode 100755 index 0000000..fa136a4 --- /dev/null +++ b/sw/Makefile.i2c @@ -0,0 +1,44 @@ +CC = gcc +CFLAGS = -Wall + +LIB = libcryptech_i2c.a +BIN = hash_i2c hash_tester_i2c trng_extractor_i2c trng_tester_i2c +INC = cryptech.h + +PREFIX = /usr/local +LIB_DIR = $(PREFIX)/lib +BIN_DIR = $(PREFIX)/bin +INC_DIR = $(PREFIX)/include + +all: $(LIB) $(BIN) + +%.o: %.c $(INC) + $(CC) $(CFLAGS) -c -o $@ $< + +libcryptech_i2c.a: tc_i2c.o + ar rcs $@ $^ + +hash_tester_i2c: hash_tester.o $(LIB) + $(CC) -o $@ $^ + +trng_tester_i2c: trng_tester.o $(LIB) + $(CC) -o $@ $^ + +hash_i2c: hash.o $(LIB) + $(CC) -o $@ $^ + +trng_extractor_i2c: trng_extractor.o $(LIB) + $(CC) -o $@ $^ + +install: $(LIB) $(BIN) $(INC) + install $(LIB) $(LIB_DIR) + install $(BIN) $(BIN_DIR) + install $(INC) $(INC_DIR) + +uninstall: + rm -f $(LIB_DIR)/$(LIB) + rm -f $(foreach bin,$(BIN),$(BIN_DIR)/$(bin)) + rm -f $(INC_DIR)/$(INC) + +clean: + rm -f *.o $(LIB) $(BIN) diff --git a/eim/sw/cryptech_memory_map.h b/sw/cryptech.h index 5cf7f42..509c4e9 100644 --- a/eim/sw/cryptech_memory_map.h +++ b/sw/cryptech.h @@ -1,8 +1,8 @@ //====================================================================== // -// cryptech_memory_map.h -// --------------------- -// The memory map for Cryptech cores. +// cryptech.h +// ---------- +// Memory map and access functions for Cryptech cores. // // // Authors: Joachim Strombergson, Paul Selkirk @@ -36,48 +36,38 @@ // //====================================================================== -// BASE_ADDR, SEGMENT_SIZE, and ADDR are defined in tc_[eim|i2c].h, -// which #includes this file. -// default definitions from i2c, because defaults are good -#ifndef BASE_ADDR -#define BASE_ADDR 0 -#endif -#ifndef SEGMENT_SIZE +// Segments. #define SEGMENT_SIZE 0x2000 -#endif -#ifndef ADDR -#define ADDR(x) (x) -#endif +#define SEGMENT_OFFSET_GLOBALS 0 * SEGMENT_SIZE +#define SEGMENT_OFFSET_HASHES 1 * SEGMENT_SIZE +#define SEGMENT_OFFSET_RNGS 2 * SEGMENT_SIZE +#define SEGMENT_OFFSET_CIPHERS 3 * SEGMENT_SIZE -#ifndef bitsToBytes -#define bitsToBytes(x) (x / 8) -#endif -// Segments. -#define SEGMENT_OFFSET_GLOBALS BASE_ADDR + (0 * SEGMENT_SIZE) -#define SEGMENT_OFFSET_HASHES BASE_ADDR + (1 * SEGMENT_SIZE) -#define SEGMENT_OFFSET_RNGS BASE_ADDR + (2 * SEGMENT_SIZE) -#define SEGMENT_OFFSET_CIPHERS BASE_ADDR + (3 * SEGMENT_SIZE) +// addresses and codes common to all cores +#define ADDR_NAME0 0x00 +#define ADDR_NAME1 0x01 +#define ADDR_VERSION 0x02 -// addresses and codes common to all cores -#define ADDR_NAME0 ADDR(0x00) -#define ADDR_NAME1 ADDR(0x01) -#define ADDR_VERSION ADDR(0x02) +// a handy macro from cryptlib +#ifndef bitsToBytes +#define bitsToBytes(x) (x / 8) +#endif //------------------------------------------------------------------ // Board segment. // Board-level registers and communication channel registers //------------------------------------------------------------------ -#define BOARD_CORE_SIZE ADDR(0x100) +#define BOARD_CORE_SIZE 0x100 #define BOARD_ADDR_BASE SEGMENT_OFFSET_GLOBALS + (0 * BOARD_CORE_SIZE) #define BOARD_ADDR_NAME0 BOARD_ADDR_BASE + ADDR_NAME0 #define BOARD_ADDR_NAME1 BOARD_ADDR_BASE + ADDR_NAME1 #define BOARD_ADDR_VERSION BOARD_ADDR_BASE + ADDR_VERSION -#define BOARD_ADDR_DUMMY BOARD_ADDR_BASE + ADDR(0xFF) +#define BOARD_ADDR_DUMMY BOARD_ADDR_BASE + 0xFF #define COMM_ADDR_BASE SEGMENT_OFFSET_GLOBALS + (1 * BOARD_CORE_SIZE) #define COMM_ADDR_NAME0 COMM_ADDR_BASE + ADDR_NAME0 @@ -88,17 +78,17 @@ //------------------------------------------------------------------ // Hashes segment. //------------------------------------------------------------------ -#define HASH_CORE_SIZE ADDR(0x100) +#define HASH_CORE_SIZE 0x100 -// addresses and codes common to all hash cores */ -#define ADDR_CTRL ADDR(0x8) +// addresses and codes common to all hash cores +#define ADDR_CTRL 0x8 #define CTRL_INIT_CMD 1 #define CTRL_NEXT_CMD 2 -#define ADDR_STATUS ADDR(0x9) +#define ADDR_STATUS 0x9 #define STATUS_READY_BIT 1 #define STATUS_VALID_BIT 2 -#define ADDR_BLOCK ADDR(0x10) -#define ADDR_DIGEST ADDR(0x20) // except SHA512 +#define ADDR_BLOCK 0x10 +#define ADDR_DIGEST 0x20 // except SHA512 // addresses and codes for the specific hash cores. #define SHA1_ADDR_BASE SEGMENT_OFFSET_HASHES + (0 * HASH_CORE_SIZE) @@ -132,7 +122,7 @@ #define SHA512_ADDR_CTRL SHA512_ADDR_BASE + ADDR_CTRL #define SHA512_ADDR_STATUS SHA512_ADDR_BASE + ADDR_STATUS #define SHA512_ADDR_BLOCK SHA512_ADDR_BASE + ADDR_BLOCK -#define SHA512_ADDR_DIGEST SHA512_ADDR_BASE + ADDR(0x40) +#define SHA512_ADDR_DIGEST SHA512_ADDR_BASE + 0x40 #define SHA512_BLOCK_LEN bitsToBytes(1024) #define SHA512_LENGTH_LEN bitsToBytes(128) #define SHA512_224_DIGEST_LEN bitsToBytes(224) @@ -145,73 +135,97 @@ #define MODE_SHA_512 3 << 2 -// ----------------------------------------------------------------- +//----------------------------------------------------------------- // TRNG segment. -// ----------------------------------------------------------------- -#define TRNG_CORE_SIZE ADDR(0x100) +//----------------------------------------------------------------- +#define TRNG_CORE_SIZE 0x100 // addresses and codes for the TRNG cores */ #define TRNG_ADDR_BASE SEGMENT_OFFSET_RNGS + (0 * TRNG_CORE_SIZE) #define TRNG_ADDR_NAME0 TRNG_ADDR_BASE + ADDR_NAME0 #define TRNG_ADDR_NAME1 TRNG_ADDR_BASE + ADDR_NAME1 #define TRNG_ADDR_VERSION TRNG_ADDR_BASE + ADDR_VERSION -#define TRNG_ADDR_CTRL TRNG_ADDR_BASE + ADDR(0x10) +#define TRNG_ADDR_CTRL TRNG_ADDR_BASE + 0x10 #define TRNG_CTRL_DISCARD 1 #define TRNG_CTRL_TEST_MODE 2 -#define TRNG_ADDR_STATUS TRNG_ADDR_BASE + ADDR(0x11) +#define TRNG_ADDR_STATUS TRNG_ADDR_BASE + 0x11 // no status bits defined (yet) -#define TRNG_ADDR_DELAY TRNG_ADDR_BASE + ADDR(0x13) +#define TRNG_ADDR_DELAY TRNG_ADDR_BASE + 0x13 #define ENTROPY1_ADDR_BASE SEGMENT_OFFSET_RNGS + (5 * TRNG_CORE_SIZE) #define ENTROPY1_ADDR_NAME0 ENTROPY1_ADDR_BASE + ADDR_NAME0 #define ENTROPY1_ADDR_NAME1 ENTROPY1_ADDR_BASE + ADDR_NAME1 #define ENTROPY1_ADDR_VERSION ENTROPY1_ADDR_BASE + ADDR_VERSION -#define ENTROPY1_ADDR_CTRL ENTROPY1_ADDR_BASE + ADDR(0x10) +#define ENTROPY1_ADDR_CTRL ENTROPY1_ADDR_BASE + 0x10 #define ENTROPY1_CTRL_ENABLE 1 -#define ENTROPY1_ADDR_STATUS ENTROPY1_ADDR_BASE + ADDR(0x11) +#define ENTROPY1_ADDR_STATUS ENTROPY1_ADDR_BASE + 0x11 #define ENTROPY1_STATUS_VALID 1 -#define ENTROPY1_ADDR_ENTROPY ENTROPY1_ADDR_BASE + ADDR(0x20) -#define ENTROPY1_ADDR_DELTA ENTROPY1_ADDR_BASE + ADDR(0x30) +#define ENTROPY1_ADDR_ENTROPY ENTROPY1_ADDR_BASE + 0x20 +#define ENTROPY1_ADDR_DELTA ENTROPY1_ADDR_BASE + 0x30 #define ENTROPY2_ADDR_BASE SEGMENT_OFFSET_RNGS + (6 * TRNG_CORE_SIZE) #define ENTROPY2_ADDR_NAME0 ENTROPY2_ADDR_BASE + ADDR_NAME0 #define ENTROPY2_ADDR_NAME1 ENTROPY2_ADDR_BASE + ADDR_NAME1 #define ENTROPY2_ADDR_VERSION ENTROPY2_ADDR_BASE + ADDR_VERSION -#define ENTROPY2_ADDR_CTRL ENTROPY2_ADDR_BASE + ADDR(0x10) +#define ENTROPY2_ADDR_CTRL ENTROPY2_ADDR_BASE + 0x10 #define ENTROPY2_CTRL_ENABLE 1 -#define ENTROPY2_ADDR_STATUS ENTROPY2_ADDR_BASE + ADDR(0x11) +#define ENTROPY2_ADDR_STATUS ENTROPY2_ADDR_BASE + 0x11 #define ENTROPY2_STATUS_VALID 1 -#define ENTROPY2_ADDR_OPA ENTROPY2_ADDR_BASE + ADDR(0x18) -#define ENTROPY2_ADDR_OPB ENTROPY2_ADDR_BASE + ADDR(0x19) -#define ENTROPY2_ADDR_ENTROPY ENTROPY2_ADDR_BASE + ADDR(0x20) -#define ENTROPY2_ADDR_RAW ENTROPY2_ADDR_BASE + ADDR(0x21) -#define ENTROPY2_ADDR_ROSC ENTROPY2_ADDR_BASE + ADDR(0x22) +#define ENTROPY2_ADDR_OPA ENTROPY2_ADDR_BASE + 0x18 +#define ENTROPY2_ADDR_OPB ENTROPY2_ADDR_BASE + 0x19 +#define ENTROPY2_ADDR_ENTROPY ENTROPY2_ADDR_BASE + 0x20 +#define ENTROPY2_ADDR_RAW ENTROPY2_ADDR_BASE + 0x21 +#define ENTROPY2_ADDR_ROSC ENTROPY2_ADDR_BASE + 0x22 #define MIXER_ADDR_BASE SEGMENT_OFFSET_RNGS + (0x0a * TRNG_CORE_SIZE) #define MIXER_ADDR_NAME0 MIXER_ADDR_BASE + ADDR_NAME0 #define MIXER_ADDR_NAME1 MIXER_ADDR_BASE + ADDR_NAME1 #define MIXER_ADDR_VERSION MIXER_ADDR_BASE + ADDR_VERSION -#define MIXER_ADDR_CTRL MIXER_ADDR_BASE + ADDR(0x10) +#define MIXER_ADDR_CTRL MIXER_ADDR_BASE + 0x10 #define MIXER_CTRL_ENABLE 1 #define MIXER_CTRL_RESTART 2 -#define MIXER_ADDR_STATUS MIXER_ADDR_BASE + ADDR(0x11) +#define MIXER_ADDR_STATUS MIXER_ADDR_BASE + 0x11 // no status bits defined (yet) -#define MIXER_ADDR_TIMEOUT MIXER_ADDR_BASE + ADDR(0x20) +#define MIXER_ADDR_TIMEOUT MIXER_ADDR_BASE + 0x20 #define CSPRNG_ADDR_BASE SEGMENT_OFFSET_RNGS + (0x0b * TRNG_CORE_SIZE) #define CSPRNG_ADDR_NAME0 CSPRNG_ADDR_BASE + ADDR_NAME0 #define CSPRNG_ADDR_NAME1 CSPRNG_ADDR_BASE + ADDR_NAME1 #define CSPRNG_ADDR_VERSION CSPRNG_ADDR_BASE + ADDR_VERSION -#define CSPRNG_ADDR_CTRL CSPRNG_ADDR_BASE + ADDR(0x10) +#define CSPRNG_ADDR_CTRL CSPRNG_ADDR_BASE + 0x10 #define CSPRNG_CTRL_ENABLE 1 #define CSPRNG_CTRL_SEED 2 -#define CSPRNG_ADDR_STATUS CSPRNG_ADDR_BASE + ADDR(0x11) +#define CSPRNG_ADDR_STATUS CSPRNG_ADDR_BASE + 0x11 #define CSPRNG_STATUS_VALID 1 -#define CSPRNG_ADDR_RANDOM CSPRNG_ADDR_BASE + ADDR(0x20) -#define CSPRNG_ADDR_NROUNDS CSPRNG_ADDR_BASE + ADDR(0x40) -#define CSPRNG_ADDR_NBLOCKS_LO CSPRNG_ADDR_BASE + ADDR(0x41) -#define CSPRNG_ADDR_NBLOCKS_HI CSPRNG_ADDR_BASE + ADDR(0x42) +#define CSPRNG_ADDR_RANDOM CSPRNG_ADDR_BASE + 0x20 +#define CSPRNG_ADDR_NROUNDS CSPRNG_ADDR_BASE + 0x40 +#define CSPRNG_ADDR_NBLOCKS_LO CSPRNG_ADDR_BASE + 0x41 +#define CSPRNG_ADDR_NBLOCKS_HI CSPRNG_ADDR_BASE + 0x42 + + +//------------------------------------------------------------------ +// Test case public functions +//------------------------------------------------------------------ +void tc_set_debug(int onoff); +int tc_write(off_t offset, const uint8_t *buf, size_t len); +int tc_read(off_t offset, uint8_t *buf, size_t len); +int tc_expected(off_t offset, const uint8_t *expected, size_t len); +int tc_init(off_t offset); +int tc_next(off_t offset); +int tc_wait(off_t offset, uint8_t status, int *count); +int tc_wait_ready(off_t offset); +int tc_wait_valid(off_t offset); + + +//------------------------------------------------------------------ +// I2C configuration +// Only used in I2C, but not harmful to define for EIM +//------------------------------------------------------------------ +#define I2C_dev "/dev/i2c-2" +#define I2C_addr 0x0f +#define I2C_SLAVE 0x0703 + //====================================================================== -// EOF cryptech_memory_map.h +// EOF cryptech.h //====================================================================== diff --git a/eim/sw/hash_eim.c b/sw/hash.c index e698129..1b7d2cc 100644 --- a/eim/sw/hash_eim.c +++ b/sw/hash.c @@ -50,14 +50,12 @@ #include <ctype.h> #include <assert.h> -#include "tc_eim.h" -#include "cryptech_memory_map.h" +#include "cryptech.h" char *usage = "Usage: %s [-d] [-v] [-q] [algorithm [file]]\n" "algorithms: sha-1, sha-256, sha-512/224, sha-512/256, sha-384, sha-512\n"; -int debug = 0; int quiet = 0; int verbose = 0; @@ -243,7 +241,7 @@ int main(int argc, char *argv[]) printf(usage, argv[0]); return EXIT_SUCCESS; case 'd': - debug = 1; + tc_set_debug(1); break; case 'v': verbose = 1; diff --git a/eim/sw/hash_tester_eim.c b/sw/hash_tester.c index 8b4f04b..6ddc09a 100644 --- a/eim/sw/hash_tester_eim.c +++ b/sw/hash_tester.c @@ -52,10 +52,8 @@ #include <ctype.h> #include <signal.h> -#include "tc_eim.h" -#include "cryptech_memory_map.h" +#include "cryptech.h" -int debug = 0; int quiet = 0; int repeat = 0; @@ -595,7 +593,7 @@ int main(int argc, char *argv[]) printf(usage, argv[0]); return EXIT_SUCCESS; case 'd': - debug = 1; + tc_set_debug(1); break; case 'q': quiet = 1; diff --git a/eim/sw/novena-eim.c b/sw/novena-eim.c index 85bfac0..85bfac0 100644 --- a/eim/sw/novena-eim.c +++ b/sw/novena-eim.c diff --git a/eim/sw/novena-eim.h b/sw/novena-eim.h index 75613bf..75613bf 100644 --- a/eim/sw/novena-eim.h +++ b/sw/novena-eim.h diff --git a/eim/sw/tc_eim.c b/sw/tc_eim.c index d44b685..0461f15 100644 --- a/eim/sw/tc_eim.c +++ b/sw/tc_eim.c @@ -41,12 +41,14 @@ #include <stdint.h> #include <arpa/inet.h> -#include "tc_eim.h" +#include "novena-eim.h" +#include "cryptech.h" -extern int debug; +static int debug = 0; static int inited = 0; /* ---------------- EIM low-level code ---------------- */ + static int init(void) { if (inited) @@ -61,8 +63,27 @@ static int init(void) return 0; } +/* translate cryptech register number to EIM address + * + * register number format: + * 3 bits segment selector + * 5 bits core selector (6 bits in native eim) + * 8 bits register selector + * + * sss ccccc rrrrrrrr => 00001000000000 sss 0 ccccc rrrrrrrr 00 + */ +static off_t eim_offset(off_t offset) +{ + return EIM_BASE_ADDR + ((offset & ~0x1fff) << 3) + ((offset & 0x1fff) << 2); +} + /* ---------------- test-case low-level code ---------------- */ +void tc_set_debug(int onoff) +{ + debug = onoff; +} + static void dump(char *label, const uint8_t *buf, size_t len) { if (debug) { @@ -81,6 +102,7 @@ int tc_write(off_t offset, const uint8_t *buf, size_t len) dump("write ", buf, len); + offset = eim_offset(offset); for (; len > 0; offset += 4, buf += 4, len -= 4) { uint32_t val; val = htonl(*(uint32_t *)buf); @@ -98,6 +120,7 @@ int tc_read(off_t offset, uint8_t *buf, size_t len) if (init() != 0) return -1; + offset = eim_offset(offset); for (; rlen > 0; offset += 4, rbuf += 4, rlen -= 4) { uint32_t val; eim_read_32(offset, &val); diff --git a/i2c/sw/tc_i2c.c b/sw/tc_i2c.c index 613d1c6..333a531 100644 --- a/i2c/sw/tc_i2c.c +++ b/sw/tc_i2c.c @@ -40,13 +40,17 @@ #include <sys/ioctl.h> #include <stdint.h> -#include "tc_i2c.h" +#include "cryptech.h" -extern int debug; +static int debug = 0; +static int i2cfd = -1; /* ---------------- I2C low-level code ---------------- */ -static int i2cfd = -1; +void tc_set_debug(int onoff) +{ + debug = onoff; +} static void dump(char *label, const uint8_t *buf, size_t len) { diff --git a/eim/sw/trng_extractor_eim.c b/sw/trng_extractor.c index be6ab16..f71a5d6 100644 --- a/eim/sw/trng_extractor_eim.c +++ b/sw/trng_extractor.c @@ -40,8 +40,7 @@ #include <stdint.h> #include <ctype.h> -#include "tc_eim.h" -#include "cryptech_memory_map.h" +#include "cryptech.h" char *usage = "%s [-a|r|c] [-n #] [-o file]\n\ @@ -53,8 +52,6 @@ char *usage = -o output file (defaults to stdout)\n\ "; -int debug = 0; /* for dump() */ - /* extract one data sample */ static int extract(off_t status_addr, off_t data_addr, uint32_t *data) { diff --git a/eim/sw/trng_tester_eim.c b/sw/trng_tester.c index def75ab..f0b80d0 100644 --- a/eim/sw/trng_tester_eim.c +++ b/sw/trng_tester.c @@ -47,8 +47,7 @@ #include <ctype.h> #include <signal.h> -#include "tc_eim.h" -#include "cryptech_memory_map.h" +#include "cryptech.h" char *usage = "Usage: %s [-h] [-d] [-q] [-r] [-w] [-n #] tc...\n"; @@ -288,6 +287,7 @@ int main(int argc, char *argv[]) printf(usage, argv[0]); return EXIT_SUCCESS; case 'd': + tc_set_debug(1); debug = 1; break; case 'q': |