aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rwxr-xr-xeim/sw/Makefile31
-rw-r--r--eim/sw/tc_eim.h50
-rwxr-xr-xi2c/sw/Makefile29
-rw-r--r--i2c/sw/cryptech_memory_map.h217
-rw-r--r--i2c/sw/hash_i2c.c288
-rw-r--r--i2c/sw/hash_tester_i2c.c634
-rw-r--r--i2c/sw/tc_i2c.h55
-rw-r--r--i2c/sw/trng_extractor_i2c.c169
-rw-r--r--i2c/sw/trng_tester_i2c.c321
-rwxr-xr-xsw/Makefile44
-rwxr-xr-xsw/Makefile.i2c44
-rw-r--r--sw/cryptech.h (renamed from eim/sw/cryptech_memory_map.h)138
-rw-r--r--sw/hash.c (renamed from eim/sw/hash_eim.c)6
-rw-r--r--sw/hash_tester.c (renamed from eim/sw/hash_tester_eim.c)6
-rw-r--r--sw/novena-eim.c (renamed from eim/sw/novena-eim.c)0
-rw-r--r--sw/novena-eim.h (renamed from eim/sw/novena-eim.h)0
-rw-r--r--sw/tc_eim.c (renamed from eim/sw/tc_eim.c)27
-rw-r--r--sw/tc_i2c.c (renamed from i2c/sw/tc_i2c.c)10
-rw-r--r--sw/trng_extractor.c (renamed from eim/sw/trng_extractor_eim.c)5
-rw-r--r--sw/trng_tester.c (renamed from eim/sw/trng_tester_eim.c)4
20 files changed, 203 insertions, 1875 deletions
diff --git a/eim/sw/Makefile b/eim/sw/Makefile
deleted file mode 100755
index 8b5f974..0000000
--- a/eim/sw/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-all: hash_tester_eim trng_tester_eim hash_eim trng_extractor_eim
-
-.c.o:
- gcc -c -Wall -o $@ $<
-
-hash_tester_eim: hash_tester_eim.o novena-eim.o tc_eim.o
- gcc -o $@ $^
-
-hash_tester_eim.o: hash_tester_eim.c tc_eim.h cryptech_memory_map.h
-
-trng_tester_eim: trng_tester_eim.o novena-eim.o tc_eim.o
- gcc -o $@ $^
-
-trng_tester_eim.o: trng_tester_eim.c tc_eim.h cryptech_memory_map.h
-
-hash_eim: hash_eim.o novena-eim.o tc_eim.o
- gcc -o $@ $^
-
-hash_eim.o: hash_eim.c tc_eim.h
-
-trng_extractor_eim: trng_extractor_eim.o novena-eim.o tc_eim.o
- gcc -o $@ $^
-
-trng_extractor_eim.o: trng_extractor_eim.c tc_eim.h cryptech_memory_map.h
-
-novena-eim.o: novena-eim.c novena-eim.h
-
-tc_eim.o: tc_eim.c tc_eim.h novena-eim.h
-
-clean:
- rm -f *.o hash_tester_eim trng_tester_eim hash_eim trng_extractor_eim
diff --git a/eim/sw/tc_eim.h b/eim/sw/tc_eim.h
deleted file mode 100644
index 5da18e4..0000000
--- a/eim/sw/tc_eim.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * tc_eim.h
- * --------
- * This module contains common code to talk to the FPGA over the EIM bus.
- *
- * Author: Paul Selkirk
- * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * - Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * - Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * - Neither the name of the NORDUnet nor the names of its contributors may
- * be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "novena-eim.h"
-#define BASE_ADDR EIM_BASE_ADDR
-#define SEGMENT_SIZE 0x10000
-#define ADDR(x) (x << 2)
-#include "cryptech_memory_map.h"
-
-/* test case public functions */
-int tc_write(off_t offset, const uint8_t *buf, size_t len);
-int tc_read(off_t offset, uint8_t *buf, size_t len);
-int tc_expected(off_t offset, const uint8_t *expected, size_t len);
-int tc_init(off_t offset);
-int tc_next(off_t offset);
-int tc_wait(off_t offset, uint8_t status, int *count);
-int tc_wait_ready(off_t offset);
-int tc_wait_valid(off_t offset);
diff --git a/i2c/sw/Makefile b/i2c/sw/Makefile
deleted file mode 100755
index 9869e04..0000000
--- a/i2c/sw/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-all: hash_tester_i2c trng_tester_i2c hash_i2c trng_extractor_i2c
-
-.c.o:
- gcc -c -Wall -o $@ $<
-
-hash_tester_i2c: hash_tester_i2c.o tc_i2c.o
- gcc -o $@ $^
-
-hash_tester_i2c.o: hash_tester_i2c.c tc_i2c.h
-
-trng_tester_i2c: trng_tester_i2c.o tc_i2c.o
- gcc -o $@ $^
-
-trng_tester_i2c.o: trng_tester_i2c.c tc_i2c.h
-
-hash_i2c: hash_i2c.o tc_i2c.o
- gcc -o $@ $^
-
-hash_i2c.o: hash_i2c.c tc_i2c.h
-
-trng_extractor_i2c: trng_extractor_i2c.o tc_i2c.o
- gcc -o $@ $^
-
-trng_extractor_i2c.o: trng_extractor_i2c.c tc_i2c.h
-
-tc_i2c.o: tc_i2c.c tc_i2c.h
-
-clean:
- rm -f *.o hash_tester_i2c trng_tester_i2c hash_i2c trng_extractor_i2c
diff --git a/i2c/sw/cryptech_memory_map.h b/i2c/sw/cryptech_memory_map.h
deleted file mode 100644
index 5cf7f42..0000000
--- a/i2c/sw/cryptech_memory_map.h
+++ /dev/null
@@ -1,217 +0,0 @@
-//======================================================================
-//
-// cryptech_memory_map.h
-// ---------------------
-// The memory map for Cryptech cores.
-//
-//
-// Authors: Joachim Strombergson, Paul Selkirk
-// Copyright (c) 2015, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-// - Redistributions of source code must retain the above copyright notice,
-// this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-// notice, this list of conditions and the following disclaimer in the
-// documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-// be used to endorse or promote products derived from this software
-// without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-// BASE_ADDR, SEGMENT_SIZE, and ADDR are defined in tc_[eim|i2c].h,
-// which #includes this file.
-
-// default definitions from i2c, because defaults are good
-#ifndef BASE_ADDR
-#define BASE_ADDR 0
-#endif
-#ifndef SEGMENT_SIZE
-#define SEGMENT_SIZE 0x2000
-#endif
-#ifndef ADDR
-#define ADDR(x) (x)
-#endif
-
-#ifndef bitsToBytes
-#define bitsToBytes(x) (x / 8)
-#endif
-
-// Segments.
-#define SEGMENT_OFFSET_GLOBALS BASE_ADDR + (0 * SEGMENT_SIZE)
-#define SEGMENT_OFFSET_HASHES BASE_ADDR + (1 * SEGMENT_SIZE)
-#define SEGMENT_OFFSET_RNGS BASE_ADDR + (2 * SEGMENT_SIZE)
-#define SEGMENT_OFFSET_CIPHERS BASE_ADDR + (3 * SEGMENT_SIZE)
-
-
-// addresses and codes common to all cores
-#define ADDR_NAME0 ADDR(0x00)
-#define ADDR_NAME1 ADDR(0x01)
-#define ADDR_VERSION ADDR(0x02)
-
-
-//------------------------------------------------------------------
-// Board segment.
-// Board-level registers and communication channel registers
-//------------------------------------------------------------------
-#define BOARD_CORE_SIZE ADDR(0x100)
-
-#define BOARD_ADDR_BASE SEGMENT_OFFSET_GLOBALS + (0 * BOARD_CORE_SIZE)
-#define BOARD_ADDR_NAME0 BOARD_ADDR_BASE + ADDR_NAME0
-#define BOARD_ADDR_NAME1 BOARD_ADDR_BASE + ADDR_NAME1
-#define BOARD_ADDR_VERSION BOARD_ADDR_BASE + ADDR_VERSION
-#define BOARD_ADDR_DUMMY BOARD_ADDR_BASE + ADDR(0xFF)
-
-#define COMM_ADDR_BASE SEGMENT_OFFSET_GLOBALS + (1 * BOARD_CORE_SIZE)
-#define COMM_ADDR_NAME0 COMM_ADDR_BASE + ADDR_NAME0
-#define COMM_ADDR_NAME1 COMM_ADDR_BASE + ADDR_NAME1
-#define COMM_ADDR_VERSION COMM_ADDR_BASE + ADDR_VERSION
-
-
-//------------------------------------------------------------------
-// Hashes segment.
-//------------------------------------------------------------------
-#define HASH_CORE_SIZE ADDR(0x100)
-
-// addresses and codes common to all hash cores */
-#define ADDR_CTRL ADDR(0x8)
-#define CTRL_INIT_CMD 1
-#define CTRL_NEXT_CMD 2
-#define ADDR_STATUS ADDR(0x9)
-#define STATUS_READY_BIT 1
-#define STATUS_VALID_BIT 2
-#define ADDR_BLOCK ADDR(0x10)
-#define ADDR_DIGEST ADDR(0x20) // except SHA512
-
-// addresses and codes for the specific hash cores.
-#define SHA1_ADDR_BASE SEGMENT_OFFSET_HASHES + (0 * HASH_CORE_SIZE)
-#define SHA1_ADDR_NAME0 SHA1_ADDR_BASE + ADDR_NAME0
-#define SHA1_ADDR_NAME1 SHA1_ADDR_BASE + ADDR_NAME1
-#define SHA1_ADDR_VERSION SHA1_ADDR_BASE + ADDR_VERSION
-#define SHA1_ADDR_CTRL SHA1_ADDR_BASE + ADDR_CTRL
-#define SHA1_ADDR_STATUS SHA1_ADDR_BASE + ADDR_STATUS
-#define SHA1_ADDR_BLOCK SHA1_ADDR_BASE + ADDR_BLOCK
-#define SHA1_ADDR_DIGEST SHA1_ADDR_BASE + ADDR_DIGEST
-#define SHA1_BLOCK_LEN bitsToBytes(512)
-#define SHA1_LENGTH_LEN bitsToBytes(64)
-#define SHA1_DIGEST_LEN bitsToBytes(160)
-
-#define SHA256_ADDR_BASE SEGMENT_OFFSET_HASHES + (1 * HASH_CORE_SIZE)
-#define SHA256_ADDR_NAME0 SHA256_ADDR_BASE + ADDR_NAME0
-#define SHA256_ADDR_NAME1 SHA256_ADDR_BASE + ADDR_NAME1
-#define SHA256_ADDR_VERSION SHA256_ADDR_BASE + ADDR_VERSION
-#define SHA256_ADDR_CTRL SHA256_ADDR_BASE + ADDR_CTRL
-#define SHA256_ADDR_STATUS SHA256_ADDR_BASE + ADDR_STATUS
-#define SHA256_ADDR_BLOCK SHA256_ADDR_BASE + ADDR_BLOCK
-#define SHA256_ADDR_DIGEST SHA256_ADDR_BASE + ADDR_DIGEST
-#define SHA256_BLOCK_LEN bitsToBytes(512)
-#define SHA256_LENGTH_LEN bitsToBytes(64)
-#define SHA256_DIGEST_LEN bitsToBytes(256)
-
-#define SHA512_ADDR_BASE SEGMENT_OFFSET_HASHES + (2 * HASH_CORE_SIZE)
-#define SHA512_ADDR_NAME0 SHA512_ADDR_BASE + ADDR_NAME0
-#define SHA512_ADDR_NAME1 SHA512_ADDR_BASE + ADDR_NAME1
-#define SHA512_ADDR_VERSION SHA512_ADDR_BASE + ADDR_VERSION
-#define SHA512_ADDR_CTRL SHA512_ADDR_BASE + ADDR_CTRL
-#define SHA512_ADDR_STATUS SHA512_ADDR_BASE + ADDR_STATUS
-#define SHA512_ADDR_BLOCK SHA512_ADDR_BASE + ADDR_BLOCK
-#define SHA512_ADDR_DIGEST SHA512_ADDR_BASE + ADDR(0x40)
-#define SHA512_BLOCK_LEN bitsToBytes(1024)
-#define SHA512_LENGTH_LEN bitsToBytes(128)
-#define SHA512_224_DIGEST_LEN bitsToBytes(224)
-#define SHA512_256_DIGEST_LEN bitsToBytes(256)
-#define SHA384_DIGEST_LEN bitsToBytes(384)
-#define SHA512_DIGEST_LEN bitsToBytes(512)
-#define MODE_SHA_512_224 0 << 2
-#define MODE_SHA_512_256 1 << 2
-#define MODE_SHA_384 2 << 2
-#define MODE_SHA_512 3 << 2
-
-
-// -----------------------------------------------------------------
-// TRNG segment.
-// -----------------------------------------------------------------
-#define TRNG_CORE_SIZE ADDR(0x100)
-
-// addresses and codes for the TRNG cores */
-#define TRNG_ADDR_BASE SEGMENT_OFFSET_RNGS + (0 * TRNG_CORE_SIZE)
-#define TRNG_ADDR_NAME0 TRNG_ADDR_BASE + ADDR_NAME0
-#define TRNG_ADDR_NAME1 TRNG_ADDR_BASE + ADDR_NAME1
-#define TRNG_ADDR_VERSION TRNG_ADDR_BASE + ADDR_VERSION
-#define TRNG_ADDR_CTRL TRNG_ADDR_BASE + ADDR(0x10)
-#define TRNG_CTRL_DISCARD 1
-#define TRNG_CTRL_TEST_MODE 2
-#define TRNG_ADDR_STATUS TRNG_ADDR_BASE + ADDR(0x11)
-// no status bits defined (yet)
-#define TRNG_ADDR_DELAY TRNG_ADDR_BASE + ADDR(0x13)
-
-#define ENTROPY1_ADDR_BASE SEGMENT_OFFSET_RNGS + (5 * TRNG_CORE_SIZE)
-#define ENTROPY1_ADDR_NAME0 ENTROPY1_ADDR_BASE + ADDR_NAME0
-#define ENTROPY1_ADDR_NAME1 ENTROPY1_ADDR_BASE + ADDR_NAME1
-#define ENTROPY1_ADDR_VERSION ENTROPY1_ADDR_BASE + ADDR_VERSION
-#define ENTROPY1_ADDR_CTRL ENTROPY1_ADDR_BASE + ADDR(0x10)
-#define ENTROPY1_CTRL_ENABLE 1
-#define ENTROPY1_ADDR_STATUS ENTROPY1_ADDR_BASE + ADDR(0x11)
-#define ENTROPY1_STATUS_VALID 1
-#define ENTROPY1_ADDR_ENTROPY ENTROPY1_ADDR_BASE + ADDR(0x20)
-#define ENTROPY1_ADDR_DELTA ENTROPY1_ADDR_BASE + ADDR(0x30)
-
-#define ENTROPY2_ADDR_BASE SEGMENT_OFFSET_RNGS + (6 * TRNG_CORE_SIZE)
-#define ENTROPY2_ADDR_NAME0 ENTROPY2_ADDR_BASE + ADDR_NAME0
-#define ENTROPY2_ADDR_NAME1 ENTROPY2_ADDR_BASE + ADDR_NAME1
-#define ENTROPY2_ADDR_VERSION ENTROPY2_ADDR_BASE + ADDR_VERSION
-#define ENTROPY2_ADDR_CTRL ENTROPY2_ADDR_BASE + ADDR(0x10)
-#define ENTROPY2_CTRL_ENABLE 1
-#define ENTROPY2_ADDR_STATUS ENTROPY2_ADDR_BASE + ADDR(0x11)
-#define ENTROPY2_STATUS_VALID 1
-#define ENTROPY2_ADDR_OPA ENTROPY2_ADDR_BASE + ADDR(0x18)
-#define ENTROPY2_ADDR_OPB ENTROPY2_ADDR_BASE + ADDR(0x19)
-#define ENTROPY2_ADDR_ENTROPY ENTROPY2_ADDR_BASE + ADDR(0x20)
-#define ENTROPY2_ADDR_RAW ENTROPY2_ADDR_BASE + ADDR(0x21)
-#define ENTROPY2_ADDR_ROSC ENTROPY2_ADDR_BASE + ADDR(0x22)
-
-#define MIXER_ADDR_BASE SEGMENT_OFFSET_RNGS + (0x0a * TRNG_CORE_SIZE)
-#define MIXER_ADDR_NAME0 MIXER_ADDR_BASE + ADDR_NAME0
-#define MIXER_ADDR_NAME1 MIXER_ADDR_BASE + ADDR_NAME1
-#define MIXER_ADDR_VERSION MIXER_ADDR_BASE + ADDR_VERSION
-#define MIXER_ADDR_CTRL MIXER_ADDR_BASE + ADDR(0x10)
-#define MIXER_CTRL_ENABLE 1
-#define MIXER_CTRL_RESTART 2
-#define MIXER_ADDR_STATUS MIXER_ADDR_BASE + ADDR(0x11)
-// no status bits defined (yet)
-#define MIXER_ADDR_TIMEOUT MIXER_ADDR_BASE + ADDR(0x20)
-
-#define CSPRNG_ADDR_BASE SEGMENT_OFFSET_RNGS + (0x0b * TRNG_CORE_SIZE)
-#define CSPRNG_ADDR_NAME0 CSPRNG_ADDR_BASE + ADDR_NAME0
-#define CSPRNG_ADDR_NAME1 CSPRNG_ADDR_BASE + ADDR_NAME1
-#define CSPRNG_ADDR_VERSION CSPRNG_ADDR_BASE + ADDR_VERSION
-#define CSPRNG_ADDR_CTRL CSPRNG_ADDR_BASE + ADDR(0x10)
-#define CSPRNG_CTRL_ENABLE 1
-#define CSPRNG_CTRL_SEED 2
-#define CSPRNG_ADDR_STATUS CSPRNG_ADDR_BASE + ADDR(0x11)
-#define CSPRNG_STATUS_VALID 1
-#define CSPRNG_ADDR_RANDOM CSPRNG_ADDR_BASE + ADDR(0x20)
-#define CSPRNG_ADDR_NROUNDS CSPRNG_ADDR_BASE + ADDR(0x40)
-#define CSPRNG_ADDR_NBLOCKS_LO CSPRNG_ADDR_BASE + ADDR(0x41)
-#define CSPRNG_ADDR_NBLOCKS_HI CSPRNG_ADDR_BASE + ADDR(0x42)
-
-//======================================================================
-// EOF cryptech_memory_map.h
-//======================================================================
diff --git a/i2c/sw/hash_i2c.c b/i2c/sw/hash_i2c.c
deleted file mode 100644
index 3a9f0cf..0000000
--- a/i2c/sw/hash_i2c.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * hash.c
- * ------
- * This program uses the coretest_hashes subsystem to produce a
- * cryptographic hash of a file or input stream. It is a generalization
- * of the hash_tester.c test program.
- *
- * Authors: Joachim Strömbergson, Paul Selkirk
- * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * - Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * - Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * - Neither the name of the NORDUnet nor the names of its contributors may
- * be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/time.h>
-#include <stdint.h>
-#include <arpa/inet.h>
-#include <assert.h>
-
-#include "tc_i2c.h"
-#include "cryptech_memory_map.h"
-
-char *usage =
-"Usage: %s [-d] [-v] [-q] [algorithm [file]]\n"
-"algorithms: sha-1, sha-256, sha-512/224, sha-512/256, sha-384, sha-512\n";
-
-int debug = 0;
-int quiet = 0;
-int verbose = 0;
-
-
-/* ---------------- algorithm lookup code ---------------- */
-
-struct ctrl {
- char *name;
- off_t block_addr;
- int block_len;
- off_t digest_addr;
- int digest_len;
- int mode;
-} ctrl[] = {
- { "sha-1", SHA1_ADDR_BLOCK, SHA1_BLOCK_LEN,
- SHA1_ADDR_DIGEST, SHA1_DIGEST_LEN, 0 },
- { "sha-256", SHA256_ADDR_BLOCK, SHA256_BLOCK_LEN,
- SHA256_ADDR_DIGEST, SHA256_DIGEST_LEN, 0 },
- { "sha-512/224", SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN,
- SHA512_ADDR_DIGEST, SHA512_224_DIGEST_LEN, MODE_SHA_512_224 },
- { "sha-512/256", SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN,
- SHA512_ADDR_DIGEST, SHA512_256_DIGEST_LEN, MODE_SHA_512_256 },
- { "sha-384", SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN,
- SHA512_ADDR_DIGEST, SHA384_DIGEST_LEN, MODE_SHA_384 },
- { "sha-512", SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN,
- SHA512_ADDR_DIGEST, SHA512_DIGEST_LEN, MODE_SHA_512 },
- { NULL, 0, 0, 0 }
-};
-
-/* return the control structure for the given algorithm */
-struct ctrl *find_algo(char *algo)
-{
- int i;
-
- for (i = 0; ctrl[i].name != NULL; ++i)
- if (strcmp(ctrl[i].name, algo) == 0)
- return &ctrl[i];
-
- fprintf(stderr, "algorithm \"%s\" not found\n\n", algo);
- fprintf(stderr, usage, "hash");
- return NULL;
-}
-
-/* ---------------- hash ---------------- */
-
-int transmit(off_t offset, uint8_t *block, int blen, int mode, int first)
-{
- off_t base = offset & ~(0x1ff);
- uint8_t ctrl_cmd[4] = { 0 };
-
- if (tc_write(offset, block, blen) != 0)
- return 1;
-
- ctrl_cmd[3] = (first ? CTRL_INIT_CMD : CTRL_NEXT_CMD) | mode;
-
- return
- tc_write(base + ADDR_CTRL, ctrl_cmd, 4) ||
- tc_wait_ready(base + ADDR_STATUS);
-}
-
-int pad_transmit(off_t offset, uint8_t *block, uint8_t flen, uint8_t blen,
- uint8_t mode, long long tlen, int first)
-{
- assert(flen < blen);
-
- block[flen++] = 0x80;
- memset(block + flen, 0, blen - flen);
-
- if (blen - flen < ((blen == 64) ? 8 : 16)) {
- if (transmit(offset, block, blen, mode, first) != 0)
- return 1;
- first = 0;
- memset(block, 0, blen);
- }
-
- /* properly the length is 128 bits for sha-512, but we can't
- * actually count above 64 bits
- */
- ((uint32_t *)block)[blen/4 - 2] = htonl((tlen >> 32) & 0xffff);
- ((uint32_t *)block)[blen/4 - 1] = htonl(tlen & 0xffff);
-
- return transmit(offset, block, blen, mode, first);
-}
-
-/* return number of digest bytes read */
-int hash(char *algo, char *file, uint8_t *digest)
-{
- uint8_t block[SHA512_BLOCK_LEN];
- struct ctrl *ctrl;
- int in_fd = 0; /* stdin */
- off_t baddr, daddr;
- int blen, dlen, mode;
- int nblk, nread, first;
- int ret = -1;
- struct timeval start, stop, difftime;
-
- ctrl = find_algo(algo);
- if (ctrl == NULL)
- return -1;
- baddr = ctrl->block_addr;
- blen = ctrl->block_len;
- daddr = ctrl->digest_addr;
- dlen = ctrl->digest_len;
- mode = ctrl->mode;
-
- if (strcmp(file, "-") != 0) {
- in_fd = open(file, O_RDONLY);
- if (in_fd < 0) {
- perror("open");
- return -1;
- }
- }
-
- if (verbose) {
- if (gettimeofday(&start, NULL) < 0) {
- perror("gettimeofday");
- goto out;
- }
- }
-
- for (nblk = 0, first = 1; ; ++nblk, first = 0) {
- nread = read(in_fd, block, blen);
- if (nread < 0) {
- /* read error */
- perror("read");
- goto out;
- }
- else if (nread < blen) {
- /* partial read = last block */
- if (pad_transmit(baddr, block, nread, blen, mode,
- (nblk * blen + nread) * 8, first) != 0)
- goto out;
- break;
- }
- else {
- /* full block read */
- if (transmit(baddr, block, blen, mode, first) != 0)
- goto out;
- }
- }
-
- /* Strictly speaking we should query "valid" status before reading digest,
- * but transmit() waits for "ready" status before returning, and the SHA
- * cores always assert valid before ready.
- */
- if (tc_read(daddr, digest, dlen) != 0) {
- perror("i2c read failed");
- goto out;
- }
-
- if (verbose) {
- if (gettimeofday(&stop, NULL) < 0) {
- perror("gettimeofday");
- goto out;
- }
- timersub(&stop, &start, &difftime);
- printf("%d blocks written in %d.%03d sec (%.3f blocks/sec)\n",
- nblk, (int)difftime.tv_sec, (int)difftime.tv_usec/1000,
- (float)nblk / ((float)difftime.tv_sec + ((float)difftime.tv_usec)/1000000));
- }
-
- ret = dlen;
-out:
- if (in_fd != 0)
- close(in_fd);
- return ret;
-}
-
-/* ---------------- main ---------------- */
-
-int main(int argc, char *argv[])
-{
- int i, opt;
- char *algo = "sha-1";
- char *file = "-";
- uint8_t digest[512/8];
- int dlen;
-
- while ((opt = getopt(argc, argv, "h?dvq")) != -1) {
- switch (opt) {
- case 'h':
- case '?':
- printf(usage, argv[0]);
- return EXIT_SUCCESS;
- case 'd':
- debug = 1;
- break;
- case 'v':
- verbose = 1;
- break;
- case 'q':
- quiet = 1;
- break;
- default:
- fprintf(stderr, usage, argv[0]);
- return EXIT_FAILURE;
- }
- }
-
- if (optind < argc) {
- algo = argv[optind];
- ++optind;
- }
- else {
- if (!quiet)
- printf("defaulting to algorithm \"%s\"\n", algo);
- }
-
- if (optind < argc) {
- file = argv[optind];
- ++optind;
- }
- else {
- if (!quiet)
- printf("reading from stdin\n");
- }
-
- dlen = hash(algo, file, digest);
- if (dlen < 0)
- return EXIT_FAILURE;
-
- for (i = 0; i < dlen; ++i) {
- printf("%02x", digest[i]);
- if (i % 16 == 15)
- printf("\n");
- else if (i % 4 == 3)
- printf(" ");
- }
- if (dlen % 16 != 0)
- printf("\n");
-
- return EXIT_SUCCESS;
-}
diff --git a/i2c/sw/hash_tester_i2c.c b/i2c/sw/hash_tester_i2c.c
deleted file mode 100644
index 41a117e..0000000
--- a/i2c/sw/hash_tester_i2c.c
+++ /dev/null
@@ -1,634 +0,0 @@
-/*
- * hash_tester.c
- * --------------
- * This program sends several commands to the coretest_hashes subsystem
- * in order to verify the SHA-1, SHA-256 and SHA-512/x hash function
- * cores.
- *
- * Note: This version of the program talks to the FPGA over an I2C bus.
- *
- * The single and dual block test cases are taken from the
- * NIST KAT document:
- * http://csrc.nist.gov/groups/ST/toolkit/documents/Examples/SHA_All.pdf
- *
- *
- * Authors: Joachim Strömbergson, Paul Selkirk
- * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * - Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * - Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * - Neither the name of the NORDUnet nor the names of its contributors may
- * be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <time.h>
-#include <stdint.h>
-#include <ctype.h>
-
-#include "tc_i2c.h"
-#include "cryptech_memory_map.h"
-
-int debug = 0;
-int quiet = 0;
-
-
-/* SHA-1/SHA-256 One Block Message Sample
- Input Message: "abc" */
-const uint8_t NIST_512_SINGLE[] =
-{ 0x61, 0x62, 0x63, 0x80, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18 };
-
-const uint8_t SHA1_SINGLE_DIGEST[] =
-{ 0xa9, 0x99, 0x3e, 0x36, 0x47, 0x06, 0x81, 0x6a,
- 0xba, 0x3e, 0x25, 0x71, 0x78, 0x50, 0xc2, 0x6c,
- 0x9c, 0xd0, 0xd8, 0x9d };
-
-const uint8_t SHA256_SINGLE_DIGEST[] =
-{ 0xBA, 0x78, 0x16, 0xBF, 0x8F, 0x01, 0xCF, 0xEA,
- 0x41, 0x41, 0x40, 0xDE, 0x5D, 0xAE, 0x22, 0x23,
- 0xB0, 0x03, 0x61, 0xA3, 0x96, 0x17, 0x7A, 0x9C,
- 0xB4, 0x10, 0xFF, 0x61, 0xF2, 0x00, 0x15, 0xAD };
-
-/* SHA-1/SHA-256 Two Block Message Sample
- Input Message: "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq" */
-const uint8_t NIST_512_DOUBLE0[] =
-{ 0x61, 0x62, 0x63, 0x64, 0x62, 0x63, 0x64, 0x65,
- 0x63, 0x64, 0x65, 0x66, 0x64, 0x65, 0x66, 0x67,
- 0x65, 0x66, 0x67, 0x68, 0x66, 0x67, 0x68, 0x69,
- 0x67, 0x68, 0x69, 0x6A, 0x68, 0x69, 0x6A, 0x6B,
- 0x69, 0x6A, 0x6B, 0x6C, 0x6A, 0x6B, 0x6C, 0x6D,
- 0x6B, 0x6C, 0x6D, 0x6E, 0x6C, 0x6D, 0x6E, 0x6F,
- 0x6D, 0x6E, 0x6F, 0x70, 0x6E, 0x6F, 0x70, 0x71,
- 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-const uint8_t NIST_512_DOUBLE1[] =
-{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xC0 };
-
-const uint8_t SHA1_DOUBLE_DIGEST[] =
-{ 0x84, 0x98, 0x3E, 0x44, 0x1C, 0x3B, 0xD2, 0x6E,
- 0xBA, 0xAE, 0x4A, 0xA1, 0xF9, 0x51, 0x29, 0xE5,
- 0xE5, 0x46, 0x70, 0xF1 };
-
-const uint8_t SHA256_DOUBLE_DIGEST[] =
-{ 0x24, 0x8D, 0x6A, 0x61, 0xD2, 0x06, 0x38, 0xB8,
- 0xE5, 0xC0, 0x26, 0x93, 0x0C, 0x3E, 0x60, 0x39,
- 0xA3, 0x3C, 0xE4, 0x59, 0x64, 0xFF, 0x21, 0x67,
- 0xF6, 0xEC, 0xED, 0xD4, 0x19, 0xDB, 0x06, 0xC1 };
-
-/* SHA-512 One Block Message Sample
- Input Message: "abc" */
-const uint8_t NIST_1024_SINGLE[] =
-{ 0x61, 0x62, 0x63, 0x80, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18 };
-
-const uint8_t SHA512_224_SINGLE_DIGEST[] =
-{ 0x46, 0x34, 0x27, 0x0f, 0x70, 0x7b, 0x6a, 0x54,
- 0xda, 0xae, 0x75, 0x30, 0x46, 0x08, 0x42, 0xe2,
- 0x0e, 0x37, 0xed, 0x26, 0x5c, 0xee, 0xe9, 0xa4,
- 0x3e, 0x89, 0x24, 0xaa };
-const uint8_t SHA512_256_SINGLE_DIGEST[] =
-{ 0x53, 0x04, 0x8e, 0x26, 0x81, 0x94, 0x1e, 0xf9,
- 0x9b, 0x2e, 0x29, 0xb7, 0x6b, 0x4c, 0x7d, 0xab,
- 0xe4, 0xc2, 0xd0, 0xc6, 0x34, 0xfc, 0x6d, 0x46,
- 0xe0, 0xe2, 0xf1, 0x31, 0x07, 0xe7, 0xaf, 0x23 };
-const uint8_t SHA384_SINGLE_DIGEST[] =
-{ 0xcb, 0x00, 0x75, 0x3f, 0x45, 0xa3, 0x5e, 0x8b,
- 0xb5, 0xa0, 0x3d, 0x69, 0x9a, 0xc6, 0x50, 0x07,
- 0x27, 0x2c, 0x32, 0xab, 0x0e, 0xde, 0xd1, 0x63,
- 0x1a, 0x8b, 0x60, 0x5a, 0x43, 0xff, 0x5b, 0xed,
- 0x80, 0x86, 0x07, 0x2b, 0xa1, 0xe7, 0xcc, 0x23,
- 0x58, 0xba, 0xec, 0xa1, 0x34, 0xc8, 0x25, 0xa7 };
-const uint8_t SHA512_SINGLE_DIGEST[] =
-{ 0xdd, 0xaf, 0x35, 0xa1, 0x93, 0x61, 0x7a, 0xba,
- 0xcc, 0x41, 0x73, 0x49, 0xae, 0x20, 0x41, 0x31,
- 0x12, 0xe6, 0xfa, 0x4e, 0x89, 0xa9, 0x7e, 0xa2,
- 0x0a, 0x9e, 0xee, 0xe6, 0x4b, 0x55, 0xd3, 0x9a,
- 0x21, 0x92, 0x99, 0x2a, 0x27, 0x4f, 0xc1, 0xa8,
- 0x36, 0xba, 0x3c, 0x23, 0xa3, 0xfe, 0xeb, 0xbd,
- 0x45, 0x4d, 0x44, 0x23, 0x64, 0x3c, 0xe8, 0x0e,
- 0x2a, 0x9a, 0xc9, 0x4f, 0xa5, 0x4c, 0xa4, 0x9f };
-
-/* SHA-512 Two Block Message Sample
- Input Message: "abcdefghbcdefghicdefghijdefghijkefghijklfghijklmghijklmn"
- "hijklmnoijklmnopjklmnopqklmnopqrlmnopqrsmnopqrstnopqrstu" */
-const uint8_t NIST_1024_DOUBLE0[] =
-{ 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68,
- 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
- 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a,
- 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b,
- 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c,
- 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d,
- 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e,
- 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
- 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70,
- 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70, 0x71,
- 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72,
- 0x6c, 0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73,
- 0x6d, 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73, 0x74,
- 0x6e, 0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75,
- 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-const uint8_t NIST_1024_DOUBLE1[] =
-{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x80 };
-
-const uint8_t SHA512_224_DOUBLE_DIGEST[] =
-{ 0x23, 0xfe, 0xc5, 0xbb, 0x94, 0xd6, 0x0b, 0x23,
- 0x30, 0x81, 0x92, 0x64, 0x0b, 0x0c, 0x45, 0x33,
- 0x35, 0xd6, 0x64, 0x73, 0x4f, 0xe4, 0x0e, 0x72,
- 0x68, 0x67, 0x4a, 0xf9 };
-const uint8_t SHA512_256_DOUBLE_DIGEST[] =
-{ 0x39, 0x28, 0xe1, 0x84, 0xfb, 0x86, 0x90, 0xf8,
- 0x40, 0xda, 0x39, 0x88, 0x12, 0x1d, 0x31, 0xbe,
- 0x65, 0xcb, 0x9d, 0x3e, 0xf8, 0x3e, 0xe6, 0x14,
- 0x6f, 0xea, 0xc8, 0x61, 0xe1, 0x9b, 0x56, 0x3a };
-const uint8_t SHA384_DOUBLE_DIGEST[] =
-{ 0x09, 0x33, 0x0c, 0x33, 0xf7, 0x11, 0x47, 0xe8,
- 0x3d, 0x19, 0x2f, 0xc7, 0x82, 0xcd, 0x1b, 0x47,
- 0x53, 0x11, 0x1b, 0x17, 0x3b, 0x3b, 0x05, 0xd2,
- 0x2f, 0xa0, 0x80, 0x86, 0xe3, 0xb0, 0xf7, 0x12,
- 0xfc, 0xc7, 0xc7, 0x1a, 0x55, 0x7e, 0x2d, 0xb9,
- 0x66, 0xc3, 0xe9, 0xfa, 0x91, 0x74, 0x60, 0x39 };
-const uint8_t SHA512_DOUBLE_DIGEST[] =
-{ 0x8e, 0x95, 0x9b, 0x75, 0xda, 0xe3, 0x13, 0xda,
- 0x8c, 0xf4, 0xf7, 0x28, 0x14, 0xfc, 0x14, 0x3f,
- 0x8f, 0x77, 0x79, 0xc6, 0xeb, 0x9f, 0x7f, 0xa1,
- 0x72, 0x99, 0xae, 0xad, 0xb6, 0x88, 0x90, 0x18,
- 0x50, 0x1d, 0x28, 0x9e, 0x49, 0x00, 0xf7, 0xe4,
- 0x33, 0x1b, 0x99, 0xde, 0xc4, 0xb5, 0x43, 0x3a,
- 0xc7, 0xd3, 0x29, 0xee, 0xb6, 0xdd, 0x26, 0x54,
- 0x5e, 0x96, 0xe5, 0x5b, 0x87, 0x4b, 0xe9, 0x09 };
-
-/* ---------------- sanity test case ---------------- */
-
-int TC0()
-{
- uint8_t board_name0[4] = "PVT1";
- uint8_t board_name1[4] = " ";
- uint8_t board_version[4] = "0.10";
-
- uint8_t comm_name0[4] = "i2c ";
- uint8_t comm_name1[4] = " ";
- uint8_t comm_version[4] = "0.10";
-
- uint8_t t[4];
-
- if (!quiet)
- printf("TC0-1: Reading board type, version, and dummy reg from global registers.\n");
-
- /* write current time into dummy register, then try to read it back
- * to make sure that we can actually write something into EIM
- */
- (void)time((time_t *)t);
- if (tc_write(BOARD_ADDR_DUMMY, t, 4) != 0)
- return 1;
-
- if (tc_expected(BOARD_ADDR_NAME0, board_name0, 4) ||
- tc_expected(BOARD_ADDR_NAME1, board_name1, 4) ||
- tc_expected(BOARD_ADDR_VERSION, board_version, 4) ||
- tc_expected(BOARD_ADDR_DUMMY, t, 4))
- return 1;
-
- if (!quiet)
- printf("TC0-2: Reading name and version words from communications core.\n");
-
- return
- tc_expected(COMM_ADDR_NAME0, comm_name0, 4) ||
- tc_expected(COMM_ADDR_NAME1, comm_name1, 4) ||
- tc_expected(COMM_ADDR_VERSION, comm_version, 4);
-}
-
-/* ---------------- SHA-1 test cases ---------------- */
-
-/* TC1: Read name and version from SHA-1 core. */
-int TC1(void)
-{
- uint8_t name0[4] = "sha1";
- uint8_t name1[4] = " ";
- uint8_t version[4] = "0.50";
-
- if (!quiet)
- printf("TC1: Reading name and version words from SHA-1 core.\n");
-
- return
- tc_expected(SHA1_ADDR_NAME0, name0, 4) ||
- tc_expected(SHA1_ADDR_NAME1, name1, 4) ||
- tc_expected(SHA1_ADDR_VERSION, version, 4);
-}
-
-/* TC2: SHA-1 Single block message test as specified by NIST. */
-int TC2(void)
-{
- const uint8_t *block = NIST_512_SINGLE;
- const uint8_t *expected = SHA1_SINGLE_DIGEST;
- int ret;
-
- if (!quiet)
- printf("TC2: Single block message test for SHA-1.\n");
-
- /* Write block to SHA-1. */
- tc_write(SHA1_ADDR_BLOCK, block, SHA1_BLOCK_LEN);
- /* Start initial block hashing, wait and check status. */
- tc_init(SHA1_ADDR_CTRL);
- tc_wait_valid(SHA1_ADDR_STATUS);
- /* Extract the digest. */
- ret = tc_expected(SHA1_ADDR_DIGEST, expected, SHA1_DIGEST_LEN);
- return ret;
-}
-
-/* TC3: SHA-1 Double block message test as specified by NIST. */
-int TC3(void)
-{
- const uint8_t *block[2] = { NIST_512_DOUBLE0, NIST_512_DOUBLE1 };
- static const uint8_t block0_expected[] =
- { 0xF4, 0x28, 0x68, 0x18, 0xC3, 0x7B, 0x27, 0xAE,
- 0x04, 0x08, 0xF5, 0x81, 0x84, 0x67, 0x71, 0x48,
- 0x4A, 0x56, 0x65, 0x72 };
- const uint8_t *expected = SHA1_DOUBLE_DIGEST;
- int ret;
-
- if (!quiet)
- printf("TC3: Double block message test for SHA-1.\n");
-
- /* Write first block to SHA-1. */
- tc_write(SHA1_ADDR_BLOCK, block[0], SHA1_BLOCK_LEN);
- /* Start initial block hashing, wait and check status. */
- tc_init(SHA1_ADDR_CTRL);
- tc_wait_valid(SHA1_ADDR_STATUS);
- /* Extract the first digest. */
- tc_expected(SHA1_ADDR_DIGEST, block0_expected, SHA1_DIGEST_LEN);
- /* Write second block to SHA-1. */
- tc_write(SHA1_ADDR_BLOCK, block[1], SHA1_BLOCK_LEN);
- /* Start next block hashing, wait and check status. */
- tc_next(SHA1_ADDR_CTRL);
- tc_wait_valid(SHA1_ADDR_STATUS);
- /* Extract the second digest. */
- ret = tc_expected(SHA1_ADDR_DIGEST, expected, SHA1_DIGEST_LEN);
- return ret;
-}
-
-/* ---------------- SHA-256 test cases ---------------- */
-
-/* TC4: Read name and version from SHA-256 core. */
-int TC4(void)
-{
- uint8_t name0[4] = "sha2";
- uint8_t name1[4] = "-256";
- uint8_t version[4] = "0.80";
-
- if (!quiet)
- printf("TC4: Reading name, type and version words from SHA-256 core.\n");
-
- return
- tc_expected(SHA256_ADDR_NAME0, name0, 4) ||
- tc_expected(SHA256_ADDR_NAME1, name1, 4) ||
- tc_expected(SHA256_ADDR_VERSION, version, 4);
-}
-
-/* TC5: SHA-256 Single block message test as specified by NIST. */
-int TC5()
-{
- const uint8_t *block = NIST_512_SINGLE;
- const uint8_t *expected = SHA256_SINGLE_DIGEST;
-
- if (!quiet)
- printf("TC5: Single block message test for SHA-256.\n");
-
- return
- /* Write block to SHA-256. */
- tc_write(SHA256_ADDR_BLOCK, block, SHA256_BLOCK_LEN) ||
- /* Start initial block hashing, wait and check status. */
- tc_init(SHA256_ADDR_CTRL) ||
- tc_wait_valid(SHA256_ADDR_STATUS) ||
- /* Extract the digest. */
- tc_expected(SHA256_ADDR_DIGEST, expected, SHA256_DIGEST_LEN);
-}
-
-/* TC6: SHA-256 Double block message test as specified by NIST. */
-int TC6()
-{
- const uint8_t *block[2] = { NIST_512_DOUBLE0, NIST_512_DOUBLE1 };
- static const uint8_t block0_expected[] =
- { 0x85, 0xE6, 0x55, 0xD6, 0x41, 0x7A, 0x17, 0x95,
- 0x33, 0x63, 0x37, 0x6A, 0x62, 0x4C, 0xDE, 0x5C,
- 0x76, 0xE0, 0x95, 0x89, 0xCA, 0xC5, 0xF8, 0x11,
- 0xCC, 0x4B, 0x32, 0xC1, 0xF2, 0x0E, 0x53, 0x3A };
- const uint8_t *expected = SHA256_DOUBLE_DIGEST;
-
- if (!quiet)
- printf("TC6: Double block message test for SHA-256.\n");
-
- return
- /* Write first block to SHA-256. */
- tc_write(SHA256_ADDR_BLOCK, block[0], SHA256_BLOCK_LEN) ||
- /* Start initial block hashing, wait and check status. */
- tc_init(SHA256_ADDR_CTRL) ||
- tc_wait_valid(SHA256_ADDR_STATUS) ||
- /* Extract the first digest. */
- tc_expected(SHA256_ADDR_DIGEST, block0_expected, SHA256_DIGEST_LEN) ||
- /* Write second block to SHA-256. */
- tc_write(SHA256_ADDR_BLOCK, block[1], SHA256_BLOCK_LEN) ||
- /* Start next block hashing, wait and check status. */
- tc_next(SHA256_ADDR_CTRL) ||
- tc_wait_valid(SHA256_ADDR_STATUS) ||
- /* Extract the second digest. */
- tc_expected(SHA256_ADDR_DIGEST, expected, SHA256_DIGEST_LEN);
-}
-
-/* TC7: SHA-256 Huge message test. */
-int TC7()
-{
- static const uint8_t block[] =
- { 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef,
- 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f,
- 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef,
- 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f,
- 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef,
- 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f,
- 0xaa, 0x55, 0xaa, 0x55, 0xde, 0xad, 0xbe, 0xef,
- 0x55, 0xaa, 0x55, 0xaa, 0xf0, 0x0f, 0xf0, 0x0f };
-
- /* final digest after 1000 iterations */
- static const uint8_t expected[] =
- { 0x76, 0x38, 0xf3, 0xbc, 0x50, 0x0d, 0xd1, 0xa6,
- 0x58, 0x6d, 0xd4, 0xd0, 0x1a, 0x15, 0x51, 0xaf,
- 0xd8, 0x21, 0xd2, 0x35, 0x2f, 0x91, 0x9e, 0x28,
- 0xd5, 0x84, 0x2f, 0xab, 0x03, 0xa4, 0x0f, 0x2a };
-
- int i, n = 1000;
-
- if (!quiet)
- printf("TC7: Message with %d blocks test for SHA-256.\n", n);
-
- /* Write block data to SHA-256. */
- if (tc_write(SHA256_ADDR_BLOCK, block, SHA256_BLOCK_LEN))
- return 1;
-
- /* Start initial block hashing, wait and check status. */
- if (tc_init(SHA256_ADDR_CTRL) ||
- tc_wait_ready(SHA256_ADDR_STATUS))
- return 1;
-
- /* First block done. Do the rest. */
- for (i = 1; i < n; ++i) {
- /* Start next block hashing, wait and check status. */
- if (tc_next(SHA256_ADDR_CTRL) ||
- tc_wait_ready(SHA256_ADDR_STATUS))
- return 1;
- }
-
- /* XXX valid is probably set at the same time as ready */
- if (tc_wait_valid(SHA256_ADDR_STATUS))
- return 1;
- /* Extract the final digest. */
- return tc_expected(SHA256_ADDR_DIGEST, expected, SHA256_DIGEST_LEN);
-}
-
-/* ---------------- SHA-512 test cases ---------------- */
-
-/* TC8: Read name and version from SHA-512 core. */
-int TC8()
-{
- uint8_t name0[4] = "sha2";
- uint8_t name1[4] = "-512";
- uint8_t version[4] = "0.80";
-
- if (!quiet)
- printf("TC8: Reading name, type and version words from SHA-512 core.\n");
-
- return
- tc_expected(SHA512_ADDR_NAME0, name0, 4) ||
- tc_expected(SHA512_ADDR_NAME1, name1, 4) ||
- tc_expected(SHA512_ADDR_VERSION, version, 4);
-}
-
-/* TC9: SHA-512 Single block message test as specified by NIST.
- We do this for all modes. */
-int tc9(int mode, const uint8_t *expected, int digest_len)
-{
- const uint8_t *block = NIST_1024_SINGLE;
- uint8_t init[4] = { 0, 0, 0, CTRL_INIT_CMD + mode };
-
- return
- /* Write block to SHA-512. */
- tc_write(SHA512_ADDR_BLOCK, block, SHA512_BLOCK_LEN) ||
- /* Start initial block hashing, wait and check status. */
- tc_write(SHA512_ADDR_CTRL, init, 4) ||
- tc_wait_valid(SHA512_ADDR_STATUS) ||
- /* Extract the digest. */
- tc_expected(SHA512_ADDR_DIGEST, expected, digest_len);
-}
-
-int TC9()
-{
- if (!quiet)
- printf("TC9-1: Single block message test for SHA-512/224.\n");
- if (tc9(MODE_SHA_512_224, SHA512_224_SINGLE_DIGEST, SHA512_224_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC9-2: Single block message test for SHA-512/256.\n");
- if (tc9(MODE_SHA_512_256, SHA512_256_SINGLE_DIGEST, SHA512_256_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC9-3: Single block message test for SHA-384.\n");
- if (tc9(MODE_SHA_384, SHA384_SINGLE_DIGEST, SHA384_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC9-4: Single block message test for SHA-512.\n");
- if (tc9(MODE_SHA_512, SHA512_SINGLE_DIGEST, SHA512_DIGEST_LEN) != 0)
- return 1;
-
- return 0;
-}
-
-/* TC10: SHA-512 Double block message test as specified by NIST.
- We do this for all modes. */
-int tc10(int mode, const uint8_t *expected, int digest_len)
-{
- const uint8_t *block[2] = { NIST_1024_DOUBLE0, NIST_1024_DOUBLE1 };
- uint8_t init[4] = { 0, 0, 0, CTRL_INIT_CMD + mode };
- uint8_t next[4] = { 0, 0, 0, CTRL_NEXT_CMD + mode };
-
- return
- /* Write first block to SHA-512. */
- tc_write(SHA512_ADDR_BLOCK, block[0], SHA512_BLOCK_LEN) ||
- /* Start initial block hashing, wait and check status. */
- tc_write(SHA512_ADDR_CTRL, init, 4) ||
- tc_wait_ready(SHA512_ADDR_STATUS) ||
- /* Write second block to SHA-512. */
- tc_write(SHA512_ADDR_BLOCK, block[1], SHA512_BLOCK_LEN) ||
- /* Start next block hashing, wait and check status. */
- tc_write(SHA512_ADDR_CTRL, next, 4) ||
- tc_wait_valid(SHA512_ADDR_STATUS) ||
- /* Extract the digest. */
- tc_expected(SHA512_ADDR_DIGEST, expected, digest_len);
-}
-
-int TC10()
-{
- if (!quiet)
- printf("TC10-1: Double block message test for SHA-512/224.\n");
- if (tc10(MODE_SHA_512_224, SHA512_224_DOUBLE_DIGEST, SHA512_224_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC10-2: Double block message test for SHA-512/256.\n");
- if (tc10(MODE_SHA_512_256, SHA512_256_DOUBLE_DIGEST, SHA512_256_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC10-3: Double block message test for SHA-384.\n");
- if (tc10(MODE_SHA_384, SHA384_DOUBLE_DIGEST, SHA384_DIGEST_LEN) != 0)
- return 1;
-
- if (!quiet)
- printf("TC10-4: Double block message test for SHA-512.\n");
- if (tc10(MODE_SHA_512, SHA512_DOUBLE_DIGEST, SHA512_DIGEST_LEN) != 0)
- return 1;
-
- return 0;
-}
-
-/* ---------------- main ---------------- */
-
-int main(int argc, char *argv[])
-{
- typedef int (*tcfp)(void);
- tcfp all_tests[] = { TC0, TC1, TC2, TC3, TC4, TC5, TC6, TC7, TC8, TC9, TC10 };
- tcfp sha1_tests[] = { TC1, TC2, TC3 };
- tcfp sha256_tests[] = { TC4, TC5, TC6, TC7 };
- tcfp sha512_tests[] = { TC8, TC9, TC10 };
-
- char *usage = "Usage: %s [-h] [-d] [-q] tc...\n";
- int i, j, opt;
-
- while ((opt = getopt(argc, argv, "h?dq")) != -1) {
- switch (opt) {
- case 'h':
- case '?':
- printf(usage, argv[0]);
- return EXIT_SUCCESS;
- case 'd':
- debug = 1;
- break;
- case 'q':
- quiet = 1;
- break;
- default:
- fprintf(stderr, usage, argv[0]);
- return EXIT_FAILURE;
- }
- }
-
- /* no args == run all tests */
- if (optind >= argc) {
- for (j = 0; j < sizeof(all_tests)/sizeof(all_tests[0]); ++j)
- if (all_tests[j]() != 0)
- return EXIT_FAILURE;
- return EXIT_SUCCESS;
- }
-
- /* run one or more tests (by number) or groups of tests (by name) */
- for (i = optind; i < argc; ++i) {
- if (strcmp(argv[i], "all") == 0) {
- for (j = 0; j < sizeof(all_tests)/sizeof(all_tests[0]); ++j)
- if (all_tests[j]() != 0)
- return EXIT_FAILURE;
- }
- else if (strcmp(argv[i], "sha1") == 0) {
- for (j = 0; j < sizeof(sha1_tests)/sizeof(sha1_tests[0]); ++j)
- if (sha1_tests[j]() != 0)
- return EXIT_FAILURE;
- }
- else if (strcmp(argv[i], "sha256") == 0) {
- for (j = 0; j < sizeof(sha256_tests)/sizeof(sha256_tests[0]); ++j)
- if (sha256_tests[j]() != 0)
- return EXIT_FAILURE;
- }
- else if (strcmp(argv[i], "sha512") == 0) {
- for (j = 0; j < sizeof(sha512_tests)/sizeof(sha512_tests[0]); ++j)
- if (sha512_tests[j]() != 0)
- return EXIT_FAILURE;
- }
- else if (isdigit(argv[i][0]) &&
- (((j = atoi(argv[i])) >= 0) &&
- (j < sizeof(all_tests)/sizeof(all_tests[0])))) {
- if (all_tests[j]() != 0)
- return EXIT_FAILURE;
- }
- else {
- fprintf(stderr, "unknown test case %s\n", argv[i]);
- return EXIT_FAILURE;
- }
- }
-
- return EXIT_SUCCESS;
-}
diff --git a/i2c/sw/tc_i2c.h b/i2c/sw/tc_i2c.h
deleted file mode 100644
index b1afae1..0000000
--- a/i2c/sw/tc_i2c.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * tc_i2c.h
- * --------
- * This module contains common code to talk to the FPGA over the I2C bus.
- *
- * Author: Paul Selkirk
- * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * - Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * - Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * - Neither the name of the NORDUnet nor the names of its contributors may
- * be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* cryptech memory map */
-#define BASE_ADDR 0
-#define SEGMENT_SIZE 0x2000
-#define ADDR(x) (x)
-#include "cryptech_memory_map.h"
-
-/* I2C configuration */
-#define I2C_dev "/dev/i2c-2"
-#define I2C_addr 0x0f
-#define I2C_SLAVE 0x0703
-
-/* test case public functions */
-int tc_write(off_t offset, const uint8_t *data, size_t len);
-int tc_read(off_t offset, uint8_t *data, size_t len);
-int tc_expected(off_t offset, const uint8_t *data, size_t len);
-int tc_init(off_t offset);
-int tc_next(off_t offset);
-int tc_wait(off_t offset, uint8_t status, int *count);
-int tc_wait_ready(off_t offset);
-int tc_wait_valid(off_t offset);
diff --git a/i2c/sw/trng_extractor_i2c.c b/i2c/sw/trng_extractor_i2c.c
deleted file mode 100644
index 7b3c2ef..0000000
--- a/i2c/sw/trng_extractor_i2c.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * trng_extractor.c
- * ----------------
- * This program extracts raw data from the avalanche_entropy, rosc_entropy,
- * and csprng cores.
- *
- * Author: Paul Selkirk
- * Copyright (c) 2015, NORDUnet A/S All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * - Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * - Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * - Neither the name of the NORDUnet nor the names of its contributors may
- * be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdint.h>
-#include <ctype.h>
-
-#include "tc_i2c.h"
-#include "cryptech_memory_map.h"
-
-char *usage =
-"%s [-a|r|c] [-n #] [-o file]\n\
-\n\
--a avalanche entropy\n\
--r rosc entropy\n\
--c csprng (default data source)\n\
--n number of 4-byte samples (scale with K, M, or G suffix)\n\
--o output file (defaults to stdout)\n\
-";
-
-int debug = 0; /* for dump() */
-
-/* extract one data sample */
-static int extract(off_t status_addr, off_t data_addr, uint32_t *data)
-{
-/* In theory, we should wait for "valid" before reading random
- * data, but as long as this is running over I2C we're going to be so
- * slow that there's no point, and checking would just make us slower.
- */
-#define WAIT_FOR_TRNG_VALID 0
-
-#if WAIT_FOR_TRNG_VALID
- if (tc_wait(status_addr, ENTROPY1_STATUS_VALID, NULL) != 0) {
- fprintf(stderr, "tc_wait failed\n");
- return 1;
- }
-#endif
-
- if (tc_read(data_addr, (uint8_t *)data, 4) != 0) {
- fprintf(stderr, "tc_read failed\n");
- return 1;
- }
-
- return 0;
-}
-
-/* main */
-int main(int argc, char *argv[])
-{
- int i, opt;
- unsigned long num_words = 1;
- char *endptr;
- off_t status_addr = CSPRNG_ADDR_STATUS;
- off_t data_addr = CSPRNG_ADDR_RANDOM;
- FILE *output = stdout;
- uint32_t data;
-
- /* parse command line */
- while ((opt = getopt(argc, argv, "h?arcn:o:")) != -1) {
- switch (opt) {
- case 'h':
- case '?':
- printf(usage, argv[0]);
- return EXIT_SUCCESS;
- case 'a':
- status_addr = ENTROPY1_ADDR_STATUS;
- data_addr = ENTROPY1_ADDR_ENTROPY;
- break;
- case 'r':
- status_addr = ENTROPY2_ADDR_STATUS;
- data_addr = ENTROPY2_ADDR_ENTROPY;
- break;
- case 'c':
- status_addr = CSPRNG_ADDR_STATUS;
- data_addr = CSPRNG_ADDR_RANDOM;
- break;
- case 'n':
- num_words = strtoul(optarg, &endptr, 10);
- switch (toupper(*endptr)) {
- case '\0':
- break;
- case 'K':
- num_words *= 1000;
- break;
- case 'M':
- num_words *= 1000000;
- break;
- case 'G':
- num_words *= 1000000000;
- break;
- default:
- fprintf(stderr, "unsupported -n suffix %s\n", endptr);
- return EXIT_FAILURE;
- }
- break;
- case 'o':
- output = fopen(optarg, "wb+");
- if (output == NULL) {
- fprintf(stderr, "error opening output file %s: ", optarg);
- perror("");
- return EXIT_FAILURE;
- }
- break;
- default:
- errout:
- fprintf(stderr, usage, argv[0]);
- return EXIT_FAILURE;
- }
- }
- if (optind < argc) {
- fprintf(stderr, "%s: invalid argument%s --",
- argv[0], argc - optind > 1 ? "s" : "");
- do {
- fprintf(stderr, " %s", argv[optind]);
- ++optind;
- } while (optind < argc);
- fprintf(stderr, "\n");
- goto errout;
- }
-
- /* get the data */
- for (i = 0; i < num_words; ++i) {
- if (extract(status_addr, data_addr, &data) != 0)
- return EXIT_FAILURE;
- if (fwrite(&data, sizeof(data), 1, output) != 1) {
- perror("fwrite");
- fclose(output);
- return EXIT_FAILURE;
- }
- }
-
- fclose(output);
- return EXIT_SUCCESS;
-}
diff --git a/i2c/sw/trng_tester_i2c.c b/i2c/sw/trng_tester_i2c.c
deleted file mode 100644
index 92b2c94..0000000
--- a/i2c/sw/trng_tester_i2c.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * trng_tester.c
- * --------------
- * This program sends several commands to the TRNG subsystem
- * in order to verify the avalanche_entropy, rosc_entropy, and csprng cores.
- *
- * Note: This version of the program talks to the FPGA over an I2C bus.
- *
- *
- * Author: Paul Selkirk
- * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * - Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * - Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * - Neither the name of the NORDUnet nor the names of its contributors may
- * be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <time.h>
-#include <stdint.h>
-#include <ctype.h>
-
-#include "tc_i2c.h"
-#include "cryptech_memory_map.h"
-
-char *usage = "Usage: %s [-h] [-d] [-q] [-w] [-n #] tc...\n";
-
-int debug = 0;
-int quiet = 0;
-int num_words = 10;
-int wait_stats = 0;
-
-/* ---------------- sanity test case ---------------- */
-
-int TC0()
-{
- uint8_t board_name0[4] = "PVT1";
- uint8_t board_name1[4] = " ";
- uint8_t board_version[4] = "0.10";
-
- uint8_t comm_name0[4] = "i2c ";
- uint8_t comm_name1[4] = " ";
- uint8_t comm_version[4] = "0.10";
-
- uint8_t t[4];
-
- if (!quiet)
- printf("TC0-1: Reading board type, version, and dummy reg from global registers.\n");
-
- /* write current time into dummy register, then try to read it back
- * to make sure that we can actually write something into EIM
- */
- (void)time((time_t *)t);
- if (tc_write(BOARD_ADDR_DUMMY, t, 4) != 0)
- return 1;
-
- if (tc_expected(BOARD_ADDR_NAME0, board_name0, 4) ||
- tc_expected(BOARD_ADDR_NAME1, board_name1, 4) ||
- tc_expected(BOARD_ADDR_VERSION, board_version, 4) ||
- tc_expected(BOARD_ADDR_DUMMY, t, 4))
- return 1;
-
- if (!quiet)
- printf("TC0-2: Reading name and version words from communications core.\n");
-
- return
- tc_expected(COMM_ADDR_NAME0, comm_name0, 4) ||
- tc_expected(COMM_ADDR_NAME1, comm_name1, 4) ||
- tc_expected(COMM_ADDR_VERSION, comm_version, 4);
-}
-
-/* ---------------- trng test cases ---------------- */
-
-/* TC1: Read name and version from trng core. */
-int TC1(void)
-{
- uint8_t name0[4] = "trng";
- uint8_t name1[4] = " ";
- uint8_t version[4] = "0.01";
-
- if (!quiet)
- printf("TC1: Reading name and version words from trng core.\n");
-
- return
- tc_expected(TRNG_ADDR_NAME0, name0, 4) ||
- tc_expected(TRNG_ADDR_NAME1, name1, 4) ||
- tc_expected(TRNG_ADDR_VERSION, version, 4);
-}
-
-/* XXX test cases for setting blinkenlights? */
-/* XXX set 'discard' control bit, see if we read the same value */
-
-/* ---------------- avalanche_entropy test cases ---------------- */
-
-/* TC2: Read name and version from avalanche_entropy core. */
-int TC2(void)
-{
- uint8_t name0[4] = "extn";
- uint8_t name1[4] = "oise";
- uint8_t version[4] = "0.10";
-
- if (!quiet)
- printf("TC2: Reading name and version words from avalanche_entropy core.\n");
-
- return
- tc_expected(ENTROPY1_ADDR_NAME0, name0, 4) ||
- tc_expected(ENTROPY1_ADDR_NAME1, name1, 4) ||
- tc_expected(ENTROPY1_ADDR_VERSION, version, 4);
-}
-
-/* XXX clear 'enable' control bit, see if we read the same value */
-
-/* TC3: Read random data from avalanche_entropy. */
-int TC3(void)
-{
- int i, n;
- uint32_t entropy;
-
- if (!quiet)
- printf("TC3: Read random data from avalanche_entropy.\n");
-
- for (i = 0; i < num_words; ++i) {
- /* check status */
- n = 10;
- if (tc_wait(ENTROPY1_ADDR_STATUS, ENTROPY1_STATUS_VALID, &n) != 0)
- return 1;
- /* read entropy data */
- if (tc_read(ENTROPY1_ADDR_ENTROPY, (uint8_t *)&entropy, 4) != 0)
- return 1;
- /* display entropy data */
- if (!debug) {
- if (wait_stats)
- printf("%08x %d\n", entropy, n);
- else
- printf("%08x\n", entropy);
- }
- }
-
- return 0;
-}
-
-/* ---------------- rosc_entropy test cases ---------------- */
-
-/* TC4: Read name and version from rosc_entropy core. */
-int TC4(void)
-{
- uint8_t name0[4] = "rosc";
- uint8_t name1[4] = " ent";
- uint8_t version[4] = "0.10";
-
- if (!quiet)
- printf("TC4: Reading name and version words from rosc_entropy core.\n");
-
- return
- tc_expected(ENTROPY2_ADDR_NAME0, name0, 4) ||
- tc_expected(ENTROPY2_ADDR_NAME1, name1, 4) ||
- tc_expected(ENTROPY2_ADDR_VERSION, version, 4);
-}
-
-/* XXX clear 'enable' control bit, see if we read the same value */
-
-/* TC5: Read random data from rosc_entropy. */
-int TC5(void)
-{
- int i, n;
- uint32_t entropy;
-
- if (!quiet)
- printf("TC5: Read random data from rosc_entropy.\n");
-
- for (i = 0; i < num_words; ++i) {
- /* check status */
- n = 10;
- if (tc_wait(ENTROPY2_ADDR_STATUS, ENTROPY2_STATUS_VALID, &n) != 0)
- return 1;
- /* read entropy data */
- if (tc_read(ENTROPY2_ADDR_ENTROPY, (uint8_t *)&entropy, 4) != 0)
- return 1;
- /* display entropy data */
- if (!debug) {
- if (wait_stats)
- printf("%08x %d\n", entropy, n);
- else
- printf("%08x\n", entropy);
- }
- }
-
- return 0;
-}
-
-/* ---------------- trng_csprng test cases ---------------- */
-
-/* TC6: Read name and version from trng_csprng core. */
-int TC6(void)
-{
- /* XXX csprng core currently doesn't have name/version registers */
- return 0;
-}
-
-/* XXX clear 'enable' control bit, see if we read the same value */
-/* XXX set 'seed' control bit, see if we read the same value */
-
-/* TC7: Read random data from trng_csprng. */
-int TC7(void)
-{
- int i, n;
- uint32_t random;
-
- if (!quiet)
- printf("TC7: Read random data from trng_csprng.\n");
-
- for (i = 0; i < num_words; ++i) {
- /* check status */
- n = 10;
- if (tc_wait(CSPRNG_ADDR_STATUS, CSPRNG_STATUS_VALID, &n) != 0)
- return 1;
- /* read random data */
- if (tc_read(CSPRNG_ADDR_RANDOM, (uint8_t *)&random, 4) != 0)
- return 1;
- /* display random data */
- if (!debug) {
- if (wait_stats)
- printf("%08x %d\n", random, n);
- else
- printf("%08x\n", random);
- }
- }
-
- return 0;
-}
-
-/* ---------------- main ---------------- */
-
-int main(int argc, char *argv[])
-{
- typedef int (*tcfp)(void);
- tcfp all_tests[] = { TC0, TC1, TC2, TC3, TC4, TC5, TC6, TC7 };
- int i, j, opt;
-
- while ((opt = getopt(argc, argv, "h?dqn:w")) != -1) {
- switch (opt) {
- case 'h':
- case '?':
- printf(usage, argv[0]);
- return EXIT_SUCCESS;
- case 'd':
- debug = 1;
- break;
- case 'q':
- quiet = 1;
- break;
- case 'n':
- num_words = atoi(optarg);
- if (num_words <= 0) {
- fprintf(stderr, "-n requires a positive integer argument\n");
- return EXIT_FAILURE;
- }
- break;
- case 'w':
- wait_stats = 1;
- break;
- default:
- fprintf(stderr, usage, argv[0]);
- return EXIT_FAILURE;
- }
- }
-
- /* no args == run all tests */
- if (optind >= argc) {
- for (j = 0; j < sizeof(all_tests)/sizeof(all_tests[0]); ++j)
- if (all_tests[j]() != 0)
- return EXIT_FAILURE;
- return EXIT_SUCCESS;
- }
-
- /* run one or more tests (by number) or groups of tests (by name) */
- for (i = optind; i < argc; ++i) {
- if (strcmp(argv[i], "all") == 0) {
- for (j = 0; j < sizeof(all_tests)/sizeof(all_tests[0]); ++j)
- if (all_tests[j]() != 0)
- return EXIT_FAILURE;
- }
- else if (isdigit(argv[i][0]) &&
- (((j = atoi(argv[i])) >= 0) &&
- (j < sizeof(all_tests)/sizeof(all_tests[0])))) {
- if (all_tests[j]() != 0)
- return EXIT_FAILURE;
- }
- else {
- fprintf(stderr, "unknown test case %s\n", argv[i]);
- return EXIT_FAILURE;
- }
- }
-
- return EXIT_SUCCESS;
-}
diff --git a/sw/Makefile b/sw/Makefile
new file mode 100755
index 0000000..93976d7
--- /dev/null
+++ b/sw/Makefile
@@ -0,0 +1,44 @@
+CC = gcc
+CFLAGS = -Wall
+
+LIB = libcryptech.a
+BIN = hash hash_tester trng_extractor trng_tester
+INC = cryptech.h
+
+PREFIX = /usr/local
+LIB_DIR = $(PREFIX)/lib
+BIN_DIR = $(PREFIX)/bin
+INC_DIR = $(PREFIX)/include
+
+all: $(LIB) $(BIN)
+
+%.o: %.c $(INC)
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+libcryptech.a: tc_eim.o novena-eim.o
+ ar rcs $@ $^
+
+hash_tester: hash_tester.o $(LIB)
+ $(CC) -o $@ $^
+
+trng_tester: trng_tester.o $(LIB)
+ $(CC) -o $@ $^
+
+hash: hash.o $(LIB)
+ $(CC) -o $@ $^
+
+trng_extractor: trng_extractor.o $(LIB)
+ $(CC) -o $@ $^
+
+install: $(LIB) $(BIN) $(INC)
+ install $(LIB) $(LIB_DIR)
+ install $(BIN) $(BIN_DIR)
+ install $(INC) $(INC_DIR)
+
+uninstall:
+ rm -f $(LIB_DIR)/$(LIB)
+ rm -f $(foreach bin,$(BIN),$(BIN_DIR)/$(bin))
+ rm -f $(INC_DIR)/$(INC)
+
+clean:
+ rm -f *.o $(LIB) $(BIN)
diff --git a/sw/Makefile.i2c b/sw/Makefile.i2c
new file mode 100755
index 0000000..fa136a4
--- /dev/null
+++ b/sw/Makefile.i2c
@@ -0,0 +1,44 @@
+CC = gcc
+CFLAGS = -Wall
+
+LIB = libcryptech_i2c.a
+BIN = hash_i2c hash_tester_i2c trng_extractor_i2c trng_tester_i2c
+INC = cryptech.h
+
+PREFIX = /usr/local
+LIB_DIR = $(PREFIX)/lib
+BIN_DIR = $(PREFIX)/bin
+INC_DIR = $(PREFIX)/include
+
+all: $(LIB) $(BIN)
+
+%.o: %.c $(INC)
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+libcryptech_i2c.a: tc_i2c.o
+ ar rcs $@ $^
+
+hash_tester_i2c: hash_tester.o $(LIB)
+ $(CC) -o $@ $^
+
+trng_tester_i2c: trng_tester.o $(LIB)
+ $(CC) -o $@ $^
+
+hash_i2c: hash.o $(LIB)
+ $(CC) -o $@ $^
+
+trng_extractor_i2c: trng_extractor.o $(LIB)
+ $(CC) -o $@ $^
+
+install: $(LIB) $(BIN) $(INC)
+ install $(LIB) $(LIB_DIR)
+ install $(BIN) $(BIN_DIR)
+ install $(INC) $(INC_DIR)
+
+uninstall:
+ rm -f $(LIB_DIR)/$(LIB)
+ rm -f $(foreach bin,$(BIN),$(BIN_DIR)/$(bin))
+ rm -f $(INC_DIR)/$(INC)
+
+clean:
+ rm -f *.o $(LIB) $(BIN)
diff --git a/eim/sw/cryptech_memory_map.h b/sw/cryptech.h
index 5cf7f42..509c4e9 100644
--- a/eim/sw/cryptech_memory_map.h
+++ b/sw/cryptech.h
@@ -1,8 +1,8 @@
//======================================================================
//
-// cryptech_memory_map.h
-// ---------------------
-// The memory map for Cryptech cores.
+// cryptech.h
+// ----------
+// Memory map and access functions for Cryptech cores.
//
//
// Authors: Joachim Strombergson, Paul Selkirk
@@ -36,48 +36,38 @@
//
//======================================================================
-// BASE_ADDR, SEGMENT_SIZE, and ADDR are defined in tc_[eim|i2c].h,
-// which #includes this file.
-// default definitions from i2c, because defaults are good
-#ifndef BASE_ADDR
-#define BASE_ADDR 0
-#endif
-#ifndef SEGMENT_SIZE
+// Segments.
#define SEGMENT_SIZE 0x2000
-#endif
-#ifndef ADDR
-#define ADDR(x) (x)
-#endif
+#define SEGMENT_OFFSET_GLOBALS 0 * SEGMENT_SIZE
+#define SEGMENT_OFFSET_HASHES 1 * SEGMENT_SIZE
+#define SEGMENT_OFFSET_RNGS 2 * SEGMENT_SIZE
+#define SEGMENT_OFFSET_CIPHERS 3 * SEGMENT_SIZE
-#ifndef bitsToBytes
-#define bitsToBytes(x) (x / 8)
-#endif
-// Segments.
-#define SEGMENT_OFFSET_GLOBALS BASE_ADDR + (0 * SEGMENT_SIZE)
-#define SEGMENT_OFFSET_HASHES BASE_ADDR + (1 * SEGMENT_SIZE)
-#define SEGMENT_OFFSET_RNGS BASE_ADDR + (2 * SEGMENT_SIZE)
-#define SEGMENT_OFFSET_CIPHERS BASE_ADDR + (3 * SEGMENT_SIZE)
+// addresses and codes common to all cores
+#define ADDR_NAME0 0x00
+#define ADDR_NAME1 0x01
+#define ADDR_VERSION 0x02
-// addresses and codes common to all cores
-#define ADDR_NAME0 ADDR(0x00)
-#define ADDR_NAME1 ADDR(0x01)
-#define ADDR_VERSION ADDR(0x02)
+// a handy macro from cryptlib
+#ifndef bitsToBytes
+#define bitsToBytes(x) (x / 8)
+#endif
//------------------------------------------------------------------
// Board segment.
// Board-level registers and communication channel registers
//------------------------------------------------------------------
-#define BOARD_CORE_SIZE ADDR(0x100)
+#define BOARD_CORE_SIZE 0x100
#define BOARD_ADDR_BASE SEGMENT_OFFSET_GLOBALS + (0 * BOARD_CORE_SIZE)
#define BOARD_ADDR_NAME0 BOARD_ADDR_BASE + ADDR_NAME0
#define BOARD_ADDR_NAME1 BOARD_ADDR_BASE + ADDR_NAME1
#define BOARD_ADDR_VERSION BOARD_ADDR_BASE + ADDR_VERSION
-#define BOARD_ADDR_DUMMY BOARD_ADDR_BASE + ADDR(0xFF)
+#define BOARD_ADDR_DUMMY BOARD_ADDR_BASE + 0xFF
#define COMM_ADDR_BASE SEGMENT_OFFSET_GLOBALS + (1 * BOARD_CORE_SIZE)
#define COMM_ADDR_NAME0 COMM_ADDR_BASE + ADDR_NAME0
@@ -88,17 +78,17 @@
//------------------------------------------------------------------
// Hashes segment.
//------------------------------------------------------------------
-#define HASH_CORE_SIZE ADDR(0x100)
+#define HASH_CORE_SIZE 0x100
-// addresses and codes common to all hash cores */
-#define ADDR_CTRL ADDR(0x8)
+// addresses and codes common to all hash cores
+#define ADDR_CTRL 0x8
#define CTRL_INIT_CMD 1
#define CTRL_NEXT_CMD 2
-#define ADDR_STATUS ADDR(0x9)
+#define ADDR_STATUS 0x9
#define STATUS_READY_BIT 1
#define STATUS_VALID_BIT 2
-#define ADDR_BLOCK ADDR(0x10)
-#define ADDR_DIGEST ADDR(0x20) // except SHA512
+#define ADDR_BLOCK 0x10
+#define ADDR_DIGEST 0x20 // except SHA512
// addresses and codes for the specific hash cores.
#define SHA1_ADDR_BASE SEGMENT_OFFSET_HASHES + (0 * HASH_CORE_SIZE)
@@ -132,7 +122,7 @@
#define SHA512_ADDR_CTRL SHA512_ADDR_BASE + ADDR_CTRL
#define SHA512_ADDR_STATUS SHA512_ADDR_BASE + ADDR_STATUS
#define SHA512_ADDR_BLOCK SHA512_ADDR_BASE + ADDR_BLOCK
-#define SHA512_ADDR_DIGEST SHA512_ADDR_BASE + ADDR(0x40)
+#define SHA512_ADDR_DIGEST SHA512_ADDR_BASE + 0x40
#define SHA512_BLOCK_LEN bitsToBytes(1024)
#define SHA512_LENGTH_LEN bitsToBytes(128)
#define SHA512_224_DIGEST_LEN bitsToBytes(224)
@@ -145,73 +135,97 @@
#define MODE_SHA_512 3 << 2
-// -----------------------------------------------------------------
+//-----------------------------------------------------------------
// TRNG segment.
-// -----------------------------------------------------------------
-#define TRNG_CORE_SIZE ADDR(0x100)
+//-----------------------------------------------------------------
+#define TRNG_CORE_SIZE 0x100
// addresses and codes for the TRNG cores */
#define TRNG_ADDR_BASE SEGMENT_OFFSET_RNGS + (0 * TRNG_CORE_SIZE)
#define TRNG_ADDR_NAME0 TRNG_ADDR_BASE + ADDR_NAME0
#define TRNG_ADDR_NAME1 TRNG_ADDR_BASE + ADDR_NAME1
#define TRNG_ADDR_VERSION TRNG_ADDR_BASE + ADDR_VERSION
-#define TRNG_ADDR_CTRL TRNG_ADDR_BASE + ADDR(0x10)
+#define TRNG_ADDR_CTRL TRNG_ADDR_BASE + 0x10
#define TRNG_CTRL_DISCARD 1
#define TRNG_CTRL_TEST_MODE 2
-#define TRNG_ADDR_STATUS TRNG_ADDR_BASE + ADDR(0x11)
+#define TRNG_ADDR_STATUS TRNG_ADDR_BASE + 0x11
// no status bits defined (yet)
-#define TRNG_ADDR_DELAY TRNG_ADDR_BASE + ADDR(0x13)
+#define TRNG_ADDR_DELAY TRNG_ADDR_BASE + 0x13
#define ENTROPY1_ADDR_BASE SEGMENT_OFFSET_RNGS + (5 * TRNG_CORE_SIZE)
#define ENTROPY1_ADDR_NAME0 ENTROPY1_ADDR_BASE + ADDR_NAME0
#define ENTROPY1_ADDR_NAME1 ENTROPY1_ADDR_BASE + ADDR_NAME1
#define ENTROPY1_ADDR_VERSION ENTROPY1_ADDR_BASE + ADDR_VERSION
-#define ENTROPY1_ADDR_CTRL ENTROPY1_ADDR_BASE + ADDR(0x10)
+#define ENTROPY1_ADDR_CTRL ENTROPY1_ADDR_BASE + 0x10
#define ENTROPY1_CTRL_ENABLE 1
-#define ENTROPY1_ADDR_STATUS ENTROPY1_ADDR_BASE + ADDR(0x11)
+#define ENTROPY1_ADDR_STATUS ENTROPY1_ADDR_BASE + 0x11
#define ENTROPY1_STATUS_VALID 1
-#define ENTROPY1_ADDR_ENTROPY ENTROPY1_ADDR_BASE + ADDR(0x20)
-#define ENTROPY1_ADDR_DELTA ENTROPY1_ADDR_BASE + ADDR(0x30)
+#define ENTROPY1_ADDR_ENTROPY ENTROPY1_ADDR_BASE + 0x20
+#define ENTROPY1_ADDR_DELTA ENTROPY1_ADDR_BASE + 0x30
#define ENTROPY2_ADDR_BASE SEGMENT_OFFSET_RNGS + (6 * TRNG_CORE_SIZE)
#define ENTROPY2_ADDR_NAME0 ENTROPY2_ADDR_BASE + ADDR_NAME0
#define ENTROPY2_ADDR_NAME1 ENTROPY2_ADDR_BASE + ADDR_NAME1
#define ENTROPY2_ADDR_VERSION ENTROPY2_ADDR_BASE + ADDR_VERSION
-#define ENTROPY2_ADDR_CTRL ENTROPY2_ADDR_BASE + ADDR(0x10)
+#define ENTROPY2_ADDR_CTRL ENTROPY2_ADDR_BASE + 0x10
#define ENTROPY2_CTRL_ENABLE 1
-#define ENTROPY2_ADDR_STATUS ENTROPY2_ADDR_BASE + ADDR(0x11)
+#define ENTROPY2_ADDR_STATUS ENTROPY2_ADDR_BASE + 0x11
#define ENTROPY2_STATUS_VALID 1
-#define ENTROPY2_ADDR_OPA ENTROPY2_ADDR_BASE + ADDR(0x18)
-#define ENTROPY2_ADDR_OPB ENTROPY2_ADDR_BASE + ADDR(0x19)
-#define ENTROPY2_ADDR_ENTROPY ENTROPY2_ADDR_BASE + ADDR(0x20)
-#define ENTROPY2_ADDR_RAW ENTROPY2_ADDR_BASE + ADDR(0x21)
-#define ENTROPY2_ADDR_ROSC ENTROPY2_ADDR_BASE + ADDR(0x22)
+#define ENTROPY2_ADDR_OPA ENTROPY2_ADDR_BASE + 0x18
+#define ENTROPY2_ADDR_OPB ENTROPY2_ADDR_BASE + 0x19
+#define ENTROPY2_ADDR_ENTROPY ENTROPY2_ADDR_BASE + 0x20
+#define ENTROPY2_ADDR_RAW ENTROPY2_ADDR_BASE + 0x21
+#define ENTROPY2_ADDR_ROSC ENTROPY2_ADDR_BASE + 0x22
#define MIXER_ADDR_BASE SEGMENT_OFFSET_RNGS + (0x0a * TRNG_CORE_SIZE)
#define MIXER_ADDR_NAME0 MIXER_ADDR_BASE + ADDR_NAME0
#define MIXER_ADDR_NAME1 MIXER_ADDR_BASE + ADDR_NAME1
#define MIXER_ADDR_VERSION MIXER_ADDR_BASE + ADDR_VERSION
-#define MIXER_ADDR_CTRL MIXER_ADDR_BASE + ADDR(0x10)
+#define MIXER_ADDR_CTRL MIXER_ADDR_BASE + 0x10
#define MIXER_CTRL_ENABLE 1
#define MIXER_CTRL_RESTART 2
-#define MIXER_ADDR_STATUS MIXER_ADDR_BASE + ADDR(0x11)
+#define MIXER_ADDR_STATUS MIXER_ADDR_BASE + 0x11
// no status bits defined (yet)
-#define MIXER_ADDR_TIMEOUT MIXER_ADDR_BASE + ADDR(0x20)
+#define MIXER_ADDR_TIMEOUT MIXER_ADDR_BASE + 0x20
#define CSPRNG_ADDR_BASE SEGMENT_OFFSET_RNGS + (0x0b * TRNG_CORE_SIZE)
#define CSPRNG_ADDR_NAME0 CSPRNG_ADDR_BASE + ADDR_NAME0
#define CSPRNG_ADDR_NAME1 CSPRNG_ADDR_BASE + ADDR_NAME1
#define CSPRNG_ADDR_VERSION CSPRNG_ADDR_BASE + ADDR_VERSION
-#define CSPRNG_ADDR_CTRL CSPRNG_ADDR_BASE + ADDR(0x10)
+#define CSPRNG_ADDR_CTRL CSPRNG_ADDR_BASE + 0x10
#define CSPRNG_CTRL_ENABLE 1
#define CSPRNG_CTRL_SEED 2
-#define CSPRNG_ADDR_STATUS CSPRNG_ADDR_BASE + ADDR(0x11)
+#define CSPRNG_ADDR_STATUS CSPRNG_ADDR_BASE + 0x11
#define CSPRNG_STATUS_VALID 1
-#define CSPRNG_ADDR_RANDOM CSPRNG_ADDR_BASE + ADDR(0x20)
-#define CSPRNG_ADDR_NROUNDS CSPRNG_ADDR_BASE + ADDR(0x40)
-#define CSPRNG_ADDR_NBLOCKS_LO CSPRNG_ADDR_BASE + ADDR(0x41)
-#define CSPRNG_ADDR_NBLOCKS_HI CSPRNG_ADDR_BASE + ADDR(0x42)
+#define CSPRNG_ADDR_RANDOM CSPRNG_ADDR_BASE + 0x20
+#define CSPRNG_ADDR_NROUNDS CSPRNG_ADDR_BASE + 0x40
+#define CSPRNG_ADDR_NBLOCKS_LO CSPRNG_ADDR_BASE + 0x41
+#define CSPRNG_ADDR_NBLOCKS_HI CSPRNG_ADDR_BASE + 0x42
+
+
+//------------------------------------------------------------------
+// Test case public functions
+//------------------------------------------------------------------
+void tc_set_debug(int onoff);
+int tc_write(off_t offset, const uint8_t *buf, size_t len);
+int tc_read(off_t offset, uint8_t *buf, size_t len);
+int tc_expected(off_t offset, const uint8_t *expected, size_t len);
+int tc_init(off_t offset);
+int tc_next(off_t offset);
+int tc_wait(off_t offset, uint8_t status, int *count);
+int tc_wait_ready(off_t offset);
+int tc_wait_valid(off_t offset);
+
+
+//------------------------------------------------------------------
+// I2C configuration
+// Only used in I2C, but not harmful to define for EIM
+//------------------------------------------------------------------
+#define I2C_dev "/dev/i2c-2"
+#define I2C_addr 0x0f
+#define I2C_SLAVE 0x0703
+
//======================================================================
-// EOF cryptech_memory_map.h
+// EOF cryptech.h
//======================================================================
diff --git a/eim/sw/hash_eim.c b/sw/hash.c
index e698129..1b7d2cc 100644
--- a/eim/sw/hash_eim.c
+++ b/sw/hash.c
@@ -50,14 +50,12 @@
#include <ctype.h>
#include <assert.h>
-#include "tc_eim.h"
-#include "cryptech_memory_map.h"
+#include "cryptech.h"
char *usage =
"Usage: %s [-d] [-v] [-q] [algorithm [file]]\n"
"algorithms: sha-1, sha-256, sha-512/224, sha-512/256, sha-384, sha-512\n";
-int debug = 0;
int quiet = 0;
int verbose = 0;
@@ -243,7 +241,7 @@ int main(int argc, char *argv[])
printf(usage, argv[0]);
return EXIT_SUCCESS;
case 'd':
- debug = 1;
+ tc_set_debug(1);
break;
case 'v':
verbose = 1;
diff --git a/eim/sw/hash_tester_eim.c b/sw/hash_tester.c
index 8b4f04b..6ddc09a 100644
--- a/eim/sw/hash_tester_eim.c
+++ b/sw/hash_tester.c
@@ -52,10 +52,8 @@
#include <ctype.h>
#include <signal.h>
-#include "tc_eim.h"
-#include "cryptech_memory_map.h"
+#include "cryptech.h"
-int debug = 0;
int quiet = 0;
int repeat = 0;
@@ -595,7 +593,7 @@ int main(int argc, char *argv[])
printf(usage, argv[0]);
return EXIT_SUCCESS;
case 'd':
- debug = 1;
+ tc_set_debug(1);
break;
case 'q':
quiet = 1;
diff --git a/eim/sw/novena-eim.c b/sw/novena-eim.c
index 85bfac0..85bfac0 100644
--- a/eim/sw/novena-eim.c
+++ b/sw/novena-eim.c
diff --git a/eim/sw/novena-eim.h b/sw/novena-eim.h
index 75613bf..75613bf 100644
--- a/eim/sw/novena-eim.h
+++ b/sw/novena-eim.h
diff --git a/eim/sw/tc_eim.c b/sw/tc_eim.c
index d44b685..0461f15 100644
--- a/eim/sw/tc_eim.c
+++ b/sw/tc_eim.c
@@ -41,12 +41,14 @@
#include <stdint.h>
#include <arpa/inet.h>
-#include "tc_eim.h"
+#include "novena-eim.h"
+#include "cryptech.h"
-extern int debug;
+static int debug = 0;
static int inited = 0;
/* ---------------- EIM low-level code ---------------- */
+
static int init(void)
{
if (inited)
@@ -61,8 +63,27 @@ static int init(void)
return 0;
}
+/* translate cryptech register number to EIM address
+ *
+ * register number format:
+ * 3 bits segment selector
+ * 5 bits core selector (6 bits in native eim)
+ * 8 bits register selector
+ *
+ * sss ccccc rrrrrrrr => 00001000000000 sss 0 ccccc rrrrrrrr 00
+ */
+static off_t eim_offset(off_t offset)
+{
+ return EIM_BASE_ADDR + ((offset & ~0x1fff) << 3) + ((offset & 0x1fff) << 2);
+}
+
/* ---------------- test-case low-level code ---------------- */
+void tc_set_debug(int onoff)
+{
+ debug = onoff;
+}
+
static void dump(char *label, const uint8_t *buf, size_t len)
{
if (debug) {
@@ -81,6 +102,7 @@ int tc_write(off_t offset, const uint8_t *buf, size_t len)
dump("write ", buf, len);
+ offset = eim_offset(offset);
for (; len > 0; offset += 4, buf += 4, len -= 4) {
uint32_t val;
val = htonl(*(uint32_t *)buf);
@@ -98,6 +120,7 @@ int tc_read(off_t offset, uint8_t *buf, size_t len)
if (init() != 0)
return -1;
+ offset = eim_offset(offset);
for (; rlen > 0; offset += 4, rbuf += 4, rlen -= 4) {
uint32_t val;
eim_read_32(offset, &val);
diff --git a/i2c/sw/tc_i2c.c b/sw/tc_i2c.c
index 613d1c6..333a531 100644
--- a/i2c/sw/tc_i2c.c
+++ b/sw/tc_i2c.c
@@ -40,13 +40,17 @@
#include <sys/ioctl.h>
#include <stdint.h>
-#include "tc_i2c.h"
+#include "cryptech.h"
-extern int debug;
+static int debug = 0;
+static int i2cfd = -1;
/* ---------------- I2C low-level code ---------------- */
-static int i2cfd = -1;
+void tc_set_debug(int onoff)
+{
+ debug = onoff;
+}
static void dump(char *label, const uint8_t *buf, size_t len)
{
diff --git a/eim/sw/trng_extractor_eim.c b/sw/trng_extractor.c
index be6ab16..f71a5d6 100644
--- a/eim/sw/trng_extractor_eim.c
+++ b/sw/trng_extractor.c
@@ -40,8 +40,7 @@
#include <stdint.h>
#include <ctype.h>
-#include "tc_eim.h"
-#include "cryptech_memory_map.h"
+#include "cryptech.h"
char *usage =
"%s [-a|r|c] [-n #] [-o file]\n\
@@ -53,8 +52,6 @@ char *usage =
-o output file (defaults to stdout)\n\
";
-int debug = 0; /* for dump() */
-
/* extract one data sample */
static int extract(off_t status_addr, off_t data_addr, uint32_t *data)
{
diff --git a/eim/sw/trng_tester_eim.c b/sw/trng_tester.c
index def75ab..f0b80d0 100644
--- a/eim/sw/trng_tester_eim.c
+++ b/sw/trng_tester.c
@@ -47,8 +47,7 @@
#include <ctype.h>
#include <signal.h>
-#include "tc_eim.h"
-#include "cryptech_memory_map.h"
+#include "cryptech.h"
char *usage = "Usage: %s [-h] [-d] [-q] [-r] [-w] [-n #] tc...\n";
@@ -288,6 +287,7 @@ int main(int argc, char *argv[])
printf(usage, argv[0]);
return EXIT_SUCCESS;
case 'd':
+ tc_set_debug(1);
debug = 1;
break;
case 'q':