aboutsummaryrefslogblamecommitdiff
path: root/eim/rtl/novena_eim.v
blob: 0d8c8d05eb8850c9de6550e609b8e50505b93a13 (plain) (tree)










































                                                                           

                                  


                                               
                                       

                                                          
                                


                              







                                                                                         

                          

                                                                                











































































                                                                         









                                                    







                                  
                                    
                                    
 
                       

                    

















                                                                        
//======================================================================
//
// novena_top.v
// ------------
// Top module for the Cryptech Novena FPGA framework. This design
// allow us to run the EIM interface at one clock and cores including
// core selector with the always present global clock.
//
//
// Author: Pavel Shatov
// Copyright (c) 2015, NORDUnet A/S All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
// - Redistributions of source code must retain the above copyright
//   notice, this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
//   be used to endorse or promote products derived from this software
//   without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================

module novena_top
  (
   // Differential input for 50 MHz general clock.
   input wire          gclk_p_pin,
   input wire          gclk_n_pin,

   // Reset controlled by the CPU.
   // this must be configured as input w/pullup
   input wire          reset_mcu_b_pin,

   // Cryptech avalanche noise board input and LED outputs
   input wire          ct_noise,
   output wire [7 : 0] ct_led,

   // EIM interface
   input wire          eim_bclk,        // EIM burst clock. Started by the CPU.
   input wire          eim_cs0_n,       // Chip select (active low).
   inout wire [15 : 0] eim_da,          // Bidirectional address and data port.
   input wire [18: 16] eim_a,           // MSB part of address port.                     
   input wire          eim_lba_n,       // Latch address signal (active low).
   input wire          eim_wr_n,        // write enable signal (active low).
   input wire          eim_oe_n,        // output enable signal (active low).
   output wire         eim_wait_n,      // Data wait signal (active low).

   // Novena utility ports
   output wire         apoptosis_pin,   // Hold low to not restart after config.
   output wire         led_pin          // LED on edge close to the FPGA.
   );


   //----------------------------------------------------------------
   // Clock Manager
   //
   // Clock manager is used to generate SYS_CLK from GCLK
   // and implement the reset logic.
   // ----------------------------------------------------------------
   wire                 sys_clk;
   wire                 sys_rst;
   wire                 eim_bclk_buf;

   novena_clkmgr clkmgr
     (
      .gclk_p(gclk_p_pin),
      .gclk_n(gclk_n_pin),

      .reset_mcu_b(reset_mcu_b_pin),

      .sys_clk(sys_clk),
      .sys_rst(sys_rst)
      );


   //
   // BCLK BUFG
   //
   BUFG BUFG_BCLK
     (
      .I(eim_bclk),
      .O(eim_bclk_buf)
      );


   //----------------------------------------------------------------
   // EIM Interface
   //
   // EIM subsystem handles all data transfer to/from CPU via EIM bus.
   //----------------------------------------------------------------
   wire [16: 0]         sys_eim_addr;
   wire                 sys_eim_wr;
   wire                 sys_eim_rd;
   wire [31: 0]         sys_eim_dout;
   wire [31: 0]         sys_eim_din;

   eim eim
     (
      .eim_bclk(eim_bclk_buf),
      .eim_cs0_n(eim_cs0_n),
      .eim_da(eim_da),
      .eim_a(eim_a),
      .eim_lba_n(eim_lba_n),
      .eim_wr_n(eim_wr_n),
      .eim_oe_n(eim_oe_n),
      .eim_wait_n(eim_wait_n),

      .sys_clk(sys_clk),
      .sys_rst(sys_rst),

      .sys_eim_addr(sys_eim_addr),
      .sys_eim_wr(sys_eim_wr),
      .sys_eim_rd(sys_eim_rd),
      .sys_eim_dout(sys_eim_dout),
      .sys_eim_din(sys_eim_din),

      .led_pin(led_pin)
      );


   //----------------------------------------------------------------
   // Core Selector
   //
   // This multiplexer is used to map different types of cores, such as
   // hashes, RNGs and ciphers to different regions (segments) of memory.
   //----------------------------------------------------------------

   // register read data for one clock cycle for EIM
   wire [31 : 0]        tmp_read_data;
   reg [31 : 0]         tmp_read_data_reg;
   assign sys_eim_din = tmp_read_data_reg;
   always @(posedge sys_clk)
     begin
        tmp_read_data_reg <= tmp_read_data;
     end

   core_selector cores
     (
      .sys_clk(sys_clk),
      .sys_rst(sys_rst),

      .sys_eim_addr(sys_eim_addr),
      .sys_eim_wr(sys_eim_wr),
      .sys_eim_rd(sys_eim_rd),
      .sys_write_data(sys_eim_dout),
      .sys_read_data(tmp_read_data),

      .noise(ct_noise),
      .debug(ct_led)
      );  


   //----------------------------------------------------------------
   // Novena Patch
   //
   // Patch logic to keep the Novena board happy.
   // The apoptosis_pin pin must be kept low or the whole board
   // (more exactly the CPU) will be reset after the FPGA has
   // been configured.
   //----------------------------------------------------------------
   assign apoptosis_pin = 1'b0;


endmodule

//======================================================================
// EOF novena_top.v
//======================================================================