From 347cc7f7781933a55dfa70a69d3cbf7b97158596 Mon Sep 17 00:00:00 2001
From: Paul Selkirk <paul@psgd.org>
Date: Wed, 18 May 2016 11:04:56 +0200
Subject: add mkmif support

---
 rtl/alpha_fmc_top.v | 84 ++++++++++++++++++++++++++++++-----------------------
 1 file changed, 47 insertions(+), 37 deletions(-)

(limited to 'rtl')

diff --git a/rtl/alpha_fmc_top.v b/rtl/alpha_fmc_top.v
index e829545..6410d44 100644
--- a/rtl/alpha_fmc_top.v
+++ b/rtl/alpha_fmc_top.v
@@ -42,18 +42,23 @@
 
 module alpha_fmc_top
   (
-   input wire         gclk_pin, // 50 MHz
+   input wire 	      gclk_pin, // 50 MHz
 
-   input wire         ct_noise, // cryptech avalanche noise circuit
+   input wire 	      ct_noise, // cryptech avalanche noise circuit
 
-   input wire         fmc_clk,  // clock
-   input wire [23: 0] fmc_a,    // address
-   inout wire [31: 0] fmc_d,    // data
-   input wire         fmc_ne1,  // chip select
-   input wire         fmc_noe,  // output enable
-   input wire         fmc_nwe,  // write enable
-   input wire         fmc_nl,   // latch enable
-   output wire        fmc_nwait,// wait
+   input wire 	      fmc_clk, // clock
+   input wire [23: 0] fmc_a, // address
+   inout wire [31: 0] fmc_d, // data
+   input wire 	      fmc_ne1, // chip select
+   input wire 	      fmc_noe, // output enable
+   input wire 	      fmc_nwe, // write enable
+   input wire 	      fmc_nl, // latch enable
+   output wire 	      fmc_nwait,// wait
+
+   output wire 	      mkm_sclk,
+   output wire 	      mkm_cs_n,
+   input wire 	      mkm_do,
+   output wire 	      mkm_di,
 
    output wire [3: 0] led_pins  // {red, yellow, green, blue}
    );
@@ -75,8 +80,8 @@ module alpha_fmc_top
       )
    clkmgr
      (
-      .gclk      (gclk_pin),
-		
+      .gclk      (gclk_pin),
+      
       .sys_clk   (sys_clk),
       .sys_rst_n (sys_rst_n)
       );
@@ -103,14 +108,14 @@ module alpha_fmc_top
    // FMC arbiter handles FMC access and transfers it into
    // `sys_clk' clock domain.
    //----------------------------------------------------------------
-`define test
+   //`define test
 
    wire [23: 0]       sys_fmc_addr;     // address
    wire               sys_fmc_wren;     // write enable
    wire               sys_fmc_rden;     // read enable
    wire [31: 0]       sys_fmc_dout;     // data output (from STM32 to FPGA)
 `ifdef test
-   reg [31: 0]        sys_fmc_din;      // data input (from FPGA to STM32)
+   reg [31: 0] 	      sys_fmc_din;      // data input (from FPGA to STM32)
 `else
    wire [31: 0]       sys_fmc_din;      // data input (from FPGA to STM32)
 `endif
@@ -180,20 +185,20 @@ module alpha_fmc_top
    //
    //----------------------------------------------------------------
    reg [31: 0] 	      test_reg;
-   
-	
-	
-		//
-		// Noise Capture Register
-		//
-	reg	[31: 0]	noise_reg;
-	
-	always @(posedge sys_clk)
-		//
-		noise_reg <= {noise_reg[30:0], ct_noise};
-		
-	
-	
+   
+   
+   
+   //
+   // Noise Capture Register
+   //
+   reg [31: 0] 	      noise_reg;
+   
+   always @(posedge sys_clk)
+     //
+     noise_reg <= {noise_reg[30:0], ct_noise};
+   
+   
+   
    always @(posedge sys_clk)
      //
      if (sys_fmc_wren) begin
@@ -236,16 +241,21 @@ module alpha_fmc_top
       .sys_write_data(sys_fmc_dout),
       .sys_read_data(sys_fmc_din),
 
-      .noise(ct_noise)
+      .noise(ct_noise),
+
+      .mkm_sclk(mkm_sclk),
+      .mkm_cs_n(mkm_cs_n),
+      .mkm_do(mkm_do),
+      .mkm_di(mkm_di)
       );  
-`endif
-
-
-		//
-		// Dummy assignment to bypass unconnected outpins pins check in BitGen
-		//
-		
-	assign led_pins[3:1] = 3'b000;
+`endif
+
+
+   //
+   // Dummy assignment to bypass unconnected outpins pins check in BitGen
+   //
+   
+   assign led_pins[3:1] = 3'b000;
 
 
 endmodule
-- 
cgit v1.2.3