From 39e3550310831a331042a23a4a586faade4f1b67 Mon Sep 17 00:00:00 2001 From: "Pavel V. Shatov (Meister)" Date: Tue, 26 Oct 2021 16:55:00 +0300 Subject: Experimental Makefile for Vivado Tested with 2018.3 and 2019.2 --- build/Makefile.vivado | 177 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 build/Makefile.vivado (limited to 'build') diff --git a/build/Makefile.vivado b/build/Makefile.vivado new file mode 100644 index 0000000..557eca2 --- /dev/null +++ b/build/Makefile.vivado @@ -0,0 +1,177 @@ +# Localize all the relative path awfulness in one variable. + +CORE_TREE := $(abspath ../../..) + +# Parameters + +project ?= alpha_fmc +top_module = alpha_fmc_top +board = alpha +part = xc7a200tfbg484-1 + +# Project configuration + +CONFIG = $(CORE_TREE)/platform/common/config +CONFIG_PROJECT = hsm +CONFIG_GEN = $(CONFIG)/core_config.py -c $(CONFIG)/core.cfg -b $(board) + + +# Intermediate TCL stuff + +tcl_warning_message = generated automatically, don't edit + +tcl_create_project = create_project.tcl +tcl_run_synthesis = run_synthesis.tcl +tcl_run_implementation = run_implementation.tcl +tcl_generate_bitstream = generate_bitstream.tcl + +# Project settings + +proj_sources_set = sources_1 +proj_constraints_set = constrs_1 +proj_synthesis_run = synth_1 +proj_implementation_run = impl_1 + +# Extra command line options + +vivado_options = -nojournal -nolog + +# Helper variables + +synth_run = $(project).runs/$(proj_synthesis_run) +impl_run = $(project).runs/$(proj_implementation_run) + +# Implementation constraints + +xdcfiles = \ + $(CORE_TREE)/platform/$(board)/xdc/$(project)_clocks.xdc \ + $(CORE_TREE)/platform/$(board)/xdc/$(project)_pinout.xdc \ + $(CORE_TREE)/platform/$(board)/xdc/$(project)_timing.xdc + +# Verilog include directories, if needed + +vlogincdirs = \ + $(CORE_TREE)/lib/lowlevel \ + $(CORE_TREE)/math/ecdsalib/rtl/microcode \ + $(CORE_TREE)/lib/util + +# Verilog files that always go with builds on this platform. + +vfiles = \ + $(CORE_TREE)/platform/alpha/rtl/alpha_fmc_top.v \ + $(CORE_TREE)/platform/alpha/rtl/alpha_regs.v \ + $(CORE_TREE)/platform/alpha/rtl/alpha_clkmgr.v \ + $(CORE_TREE)/platform/alpha/rtl/clkmgr_mmcm.v \ + $(CORE_TREE)/platform/alpha/rtl/clkmgr_mmcm_ctrl.v \ + ./core_selector.v \ + $(CORE_TREE)/platform/alpha/rtl/clkmgr_reset_gen.v \ + $(CORE_TREE)/platform/common/extra/reset_replicator.v \ + $(CORE_TREE)/comm/fmc/src/rtl/fmc_arbiter.v \ + $(CORE_TREE)/comm/fmc/src/rtl/fmc_d_phy.v \ + $(CORE_TREE)/comm/fmc/src/rtl/fmc_indicator.v \ + $(CORE_TREE)/comm/fmc/src/rtl/fmc_regs.v + +# Verilog files selected by the core configuration script. + +-include ./core_vfiles.mk + +# List of Vivado's intermediate files and helper files + +junk = \ + $(tcl_create_project) \ + $(tcl_run_synthesis) \ + $(tcl_run_implementation) \ + $(tcl_generate_bitstream) \ + $(project).*/ \ + usage_statistics_webtalk.xml\ + .Xil/ + + + +.PHONY: all clean distclean + +# default target is to build a bitstream + +all: $(top_module).bit + +# recipe to generate "xilinx project" (.xpr) file + +$(project).xpr: + # create helper tcl file + echo "# $(tcl_warning_message)" > $(tcl_create_project) + # add create_project command + echo "create_project -force -part $(part) $(project)" >> $(tcl_create_project) + # add sources and constraints + for z in $(vfiles); do echo "add_files -fileset $(proj_sources_set) $$z" >> $(tcl_create_project); done + for z in $(xdcfiles); do echo "add_files -fileset $(proj_constraints_set) $$z" >> $(tcl_create_project); done + # add include directories + echo "set_property include_dirs {$(vlogincdirs)} [get_filesets $(proj_sources_set)]" >> $(tcl_create_project) + # invoke vivado + vivado -mode batch $(vivado_options) -source $(tcl_create_project) + +# recipe to run synthesis, this should produce "design check point" (.dcp) file + +$(synth_run)/$(top_module).dcp: $(project).xpr $(vfiles) $(xdcfiles) + # create helper tcl file + echo "# $(tcl_warning_message)" > $(tcl_run_synthesis) + # add open_project command + echo "open_project $(project).xpr" >> $(tcl_run_synthesis) + # reset synthesis run + echo "reset_run $(proj_synthesis_run)" >> $(tcl_run_synthesis) + # launch synthesis run and wait for it to finish + echo "launch_runs $(proj_synthesis_run)" >> $(tcl_run_synthesis) + echo "wait_on_run $(proj_synthesis_run)" >> $(tcl_run_synthesis) + # invoke vivado + vivado -mode batch $(vivado_options) -source $(tcl_run_synthesis) + # for some reason vivado seems to overwrite the project file when exiting, + # which causes .xpr to appear newer, than the corresponding .dcp and gets + # make to always re-run synthesis, even if the .dcp is already available + # the quick and dirty workaround is to clone the .dcp's date to .xpr + touch -r $(synth_run)/$(top_module).dcp $(project).xpr + +# recipe to run implementation, this should produce another routed "design check point" (.dcp) file + +$(impl_run)/$(top_module)_routed.dcp: $(synth_run)/$(top_module).dcp + # create helper tcl file + echo "# $(tcl_warning_message)" > $(tcl_run_implementation) + # add open_project command + echo "open_project $(project).xpr" >> $(tcl_run_implementation) + # reset synthesis run + echo "reset_run $(proj_implementation_run)" >> $(tcl_run_implementation) + # launch synthesis run and wait for it to finish + echo "launch_runs $(proj_implementation_run)" >> $(tcl_run_implementation) + echo "wait_on_run $(proj_implementation_run)" >> $(tcl_run_implementation) + # invoke vivado + vivado -mode batch $(vivado_options) -source $(tcl_run_implementation) + # same thing as for synthesis, counteract vivado's stupid project file overwriting + touch -r $(synth_run)/$(top_module).dcp $(project).xpr + +# recipe to build the bitstream (.bit) from routed checkpoint + +$(top_module).bit: $(impl_run)/$(top_module)_routed.dcp + # create helper tcl file + echo "# $(tcl_warning_message)" > $(tcl_generate_bitstream) + # add open_project command + echo "open_project $(project).xpr" >> $(tcl_generate_bitstream) + # add open_run command + echo "open_run $(proj_implementation_run)" >> $(tcl_generate_bitstream) + # enable compression + echo "set_property BITSTREAM.GENERAL.COMPRESS TRUE [get_designs $(proj_implementation_run)]" >> $(tcl_generate_bitstream) + # add write_bitstream command + echo "write_bitstream -force $(top_module).bit" >> $(tcl_generate_bitstream) + # invoke vivado + vivado -mode batch $(vivado_options) -source $(tcl_generate_bitstream) + # same thing as for synthesis and implementation, counteract vivado's stupid project file overwriting + touch -r $(synth_run)/$(top_module).dcp $(project).xpr + +# Build the default core_selector if it doesn't already exist. + +core_selector.v core_vfiles.mk: + $(CONFIG_GEN) -p $(CONFIG_PROJECT) + +# clean +clean: + rm -rf $(junk) + +distclean: clean + rm core_selector.v core_vfiles.mk -- cgit v1.2.3