From 0770d120f20bab87df10df989790d9157afa91a2 Mon Sep 17 00:00:00 2001 From: "Pavel V. Shatov (Meister)" Date: Tue, 25 Sep 2018 01:18:36 +0300 Subject: Double-and-add point multiplication framework --- rtl/ed25519_multiplier.v | 250 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 250 insertions(+) create mode 100644 rtl/ed25519_multiplier.v (limited to 'rtl') diff --git a/rtl/ed25519_multiplier.v b/rtl/ed25519_multiplier.v new file mode 100644 index 0000000..d6960ec --- /dev/null +++ b/rtl/ed25519_multiplier.v @@ -0,0 +1,250 @@ +//------------------------------------------------------------------------------ +// +// ed25519_multiplier.v +// ----------------------------------------------------------------------------- +// Ed25519 base point scalar multiplier. +// +// Authors: Pavel Shatov +// +// Copyright (c) 2018, NORDUnet A/S +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are met: +// +// - Redistributions of source code must retain the above copyright notice, +// this list of conditions and the following disclaimer. +// +// - Redistributions in binary form must reproduce the above copyright notice, +// this list of conditions and the following disclaimer in the documentation +// and/or other materials provided with the distribution. +// +// - Neither the name of the NORDUnet nor the names of its contributors may be +// used to endorse or promote products derived from this software without +// specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE +// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +// POSSIBILITY OF SUCH DAMAGE. +// +//------------------------------------------------------------------------------ + +module ed25519_multiplier +( + clk, rst_n, + ena, rdy, + k_addr, qy_addr, + qy_wren, + k_din, + qy_dout +); + + + // + // Microcode Header + // +`include "ed25519_uop.v" + + + // + // Ports + // + input clk; // system clock + input rst_n; // active-low async reset + + input ena; // enable input + output rdy; // ready output + + output [ 2:0] k_addr; // + output [ 2:0] qy_addr; // + output qy_wren; // + input [31:0] k_din; // + output [31:0] qy_dout; // + + + // + // FSM + // + localparam [3:0] FSM_STATE_IDLE = 4'd00; + localparam [3:0] FSM_STATE_PREPARE_TRIG = 4'd01; + localparam [3:0] FSM_STATE_PREPARE_WAIT = 4'd02; + localparam [3:0] FSM_STATE_BEFORE_ROUND_TRIG = 4'd03; + localparam [3:0] FSM_STATE_BEFORE_ROUND_WAIT = 4'd04; + localparam [3:0] FSM_STATE_DURING_ROUND_TRIG = 4'd05; + localparam [3:0] FSM_STATE_DURING_ROUND_WAIT = 4'd06; + localparam [3:0] FSM_STATE_AFTER_ROUND_TRIG = 4'd07; + localparam [3:0] FSM_STATE_AFTER_ROUND_WAIT = 4'd08; + localparam [3:0] FSM_STATE_DONE = 4'd15; + + reg [3:0] fsm_state = FSM_STATE_IDLE; + reg [3:0] fsm_state_next; + + + // + // Round Counter + // + reg [7:0] bit_counter; + wire [7:0] bit_counter_max = 8'hFF; // 255 + wire [7:0] bit_counter_zero = 8'h00; // 0 + wire [7:0] bit_counter_next = + (bit_counter < bit_counter_max) ? bit_counter + 1'b1 : bit_counter_zero; + + assign k_addr = bit_counter[7:5]; + + + // + // Worker Trigger Logic + // + reg worker_trig = 1'b0; + wire worker_done; + + wire fsm_wait_done = !worker_trig && worker_done; + + always @(posedge clk or negedge rst_n) + // + if (rst_n == 1'b0) worker_trig <= 1'b0; + else case (fsm_state) + FSM_STATE_PREPARE_TRIG, + FSM_STATE_BEFORE_ROUND_TRIG, + FSM_STATE_DURING_ROUND_TRIG, + FSM_STATE_AFTER_ROUND_TRIG: worker_trig <= 1'b1; + default: worker_trig <= 1'b0; + endcase + + + // + // Round Counter Increment Logic + // + always @(posedge clk) + // + case (fsm_state_next) + FSM_STATE_PREPARE_TRIG: bit_counter <= bit_counter_zero; + FSM_STATE_AFTER_ROUND_TRIG: bit_counter <= bit_counter_next; + endcase + + + // + // Final Round Detection Logic + // + wire [ 3: 0] fsm_state_after_round = (bit_counter != bit_counter_zero) ? + FSM_STATE_BEFORE_ROUND_TRIG : FSM_STATE_DONE; + + + + + // + // K Latch + // + reg [31:0] k_din_shreg; + + wire [4:0] k_bit_index = bit_counter[4:0]; + + always @(posedge clk) + // + if (fsm_state_next == FSM_STATE_BEFORE_ROUND_TRIG) + // + if (k_bit_index == 5'd0) + // + case (k_addr) + 3'd0: k_din_shreg <= {k_din[31:3], 3'b000}; + 3'd7: k_din_shreg <= {2'b01, k_din[29:0]}; + default: k_din_shreg <= k_din; + endcase + // + else k_din_shreg <= {k_din_shreg[0], k_din_shreg[31:1]}; + + + // + // Worker Offset Logic + // + reg [UOP_ADDR_WIDTH-1:0] worker_offset; + + always @(posedge clk) + // + case (fsm_state) + FSM_STATE_PREPARE_TRIG: worker_offset <= UOP_OFFSET_PREPARE; + FSM_STATE_BEFORE_ROUND_TRIG: worker_offset <= k_din_shreg[0] ? UOP_OFFSET_BEFORE_ROUND_K1 : UOP_OFFSET_BEFORE_ROUND_K0; + default: worker_offset <= {UOP_ADDR_WIDTH{1'bX}}; + endcase + + + // + // FSM Process + // + always @(posedge clk or negedge rst_n) + // + if (rst_n == 1'b0) fsm_state <= FSM_STATE_IDLE; + else fsm_state <= fsm_state_next; + + + // + // FSM Transition Logic + // + always @* begin + // + fsm_state_next = FSM_STATE_IDLE; + // + case (fsm_state) + + FSM_STATE_IDLE: fsm_state_next = ena ? FSM_STATE_PREPARE_TRIG : FSM_STATE_IDLE; + + FSM_STATE_PREPARE_TRIG: fsm_state_next = FSM_STATE_PREPARE_WAIT; + FSM_STATE_PREPARE_WAIT: fsm_state_next = fsm_wait_done ? FSM_STATE_BEFORE_ROUND_TRIG : FSM_STATE_PREPARE_WAIT; + + FSM_STATE_BEFORE_ROUND_TRIG: fsm_state_next = FSM_STATE_BEFORE_ROUND_WAIT; + FSM_STATE_BEFORE_ROUND_WAIT: fsm_state_next = fsm_wait_done ? FSM_STATE_DURING_ROUND_TRIG : FSM_STATE_BEFORE_ROUND_WAIT; + + FSM_STATE_DURING_ROUND_TRIG: fsm_state_next = FSM_STATE_DURING_ROUND_WAIT; + FSM_STATE_DURING_ROUND_WAIT: fsm_state_next = fsm_wait_done ? FSM_STATE_AFTER_ROUND_TRIG : FSM_STATE_DURING_ROUND_WAIT; + + FSM_STATE_AFTER_ROUND_TRIG: fsm_state_next = FSM_STATE_AFTER_ROUND_WAIT; + FSM_STATE_AFTER_ROUND_WAIT: fsm_state_next = fsm_wait_done ? fsm_state_after_round : FSM_STATE_AFTER_ROUND_WAIT; + + FSM_STATE_DONE: fsm_state_next = FSM_STATE_IDLE; + + endcase + // + end + + + // + // Worker + // + ed25519_worker uop_worker + ( + .clk (clk), + .rst_n (rst_n), + .ena (worker_trig), + .rdy (worker_done), + .uop_offset (worker_offset) + ); + + + // + // Ready Flag Logic + // + reg rdy_reg = 1'b1; + assign rdy = rdy_reg; + + always @(posedge clk or negedge rst_n) + // + if (rst_n == 1'b0) rdy_reg <= 1'b1; + else case (fsm_state) + FSM_STATE_IDLE: if (ena) rdy_reg <= 1'b0; + FSM_STATE_DONE: rdy_reg <= 1'b1; + endcase + + +endmodule + + +//------------------------------------------------------------------------------ +// End-of-File +//------------------------------------------------------------------------------ -- cgit v1.2.3