1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
|
//
// simple driver to test "ecdsa384" core in hardware
//
//
// note, that the test program needs a custom bitstream where
// the core is located at offset 0 (without the core selector)
//
// stm32 headers
#include "stm-init.h"
#include "stm-led.h"
#include "stm-fmc.h"
// locations of core registers
#define CORE_ADDR_NAME0 (0x00 << 2)
#define CORE_ADDR_NAME1 (0x01 << 2)
#define CORE_ADDR_VERSION (0x02 << 2)
#define CORE_ADDR_CONTROL (0x08 << 2)
#define CORE_ADDR_STATUS (0x09 << 2)
// locations of data buffers
#define CORE_ADDR_BUF_K (0x20 << 2)
#define CORE_ADDR_BUF_X (0x28 << 2)
#define CORE_ADDR_BUF_Y (0x30 << 2)
// bit maps
#define CORE_CONTROL_BIT_NEXT 0x00000002
#define CORE_STATUS_BIT_READY 0x00000002
// curve selection
#define USE_CURVE 1
#include "ecdsa_model.h"
#define BUF_NUM_WORDS (OPERAND_WIDTH / (sizeof(uint32_t) << 3)) // 8
//
// test vectors
//
static const uint32_t p256_d[BUF_NUM_WORDS] = ECDSA_D;
static const uint32_t p256_qx[BUF_NUM_WORDS] = ECDSA_Q_X;
static const uint32_t p256_qy[BUF_NUM_WORDS] = ECDSA_Q_Y;
static const uint32_t p256_k[BUF_NUM_WORDS] = ECDSA_K;
static const uint32_t p256_rx[BUF_NUM_WORDS] = ECDSA_R_X;
static const uint32_t p256_ry[BUF_NUM_WORDS] = ECDSA_R_Y;
static const uint32_t p256_i[BUF_NUM_WORDS] = ECDSA_ONE;
static const uint32_t p256_gx[BUF_NUM_WORDS] = ECDSA_G_X;
static const uint32_t p256_gy[BUF_NUM_WORDS] = ECDSA_G_Y;
static const uint32_t p256_z[BUF_NUM_WORDS] = ECDSA_ZERO;
static const uint32_t p256_n[BUF_NUM_WORDS] = ECDSA_N;
//
// prototypes
//
void toggle_yellow_led(void);
int test_p256_multiplier(const uint32_t *k, const uint32_t *px, const uint32_t *py);
//
// test routine
//
int main()
{
int ok;
stm_init();
fmc_init();
led_on(LED_GREEN);
led_off(LED_RED);
led_off(LED_YELLOW);
led_off(LED_BLUE);
uint32_t core_name0;
uint32_t core_name1;
fmc_read_32(CORE_ADDR_NAME0, &core_name0);
fmc_read_32(CORE_ADDR_NAME1, &core_name1);
// "ecds", "a256"
if ((core_name0 != 0x65636473) || (core_name1 != 0x61323536)) {
led_off(LED_GREEN);
led_on(LED_RED);
while (1);
}
// repeat forever
while (1)
{
ok = 1;
ok = ok && test_p256_multiplier(p256_d, p256_qx, p256_qy);
ok = ok && test_p256_multiplier(p256_k, p256_rx, p256_ry);
ok = ok && test_p256_multiplier(p256_z, p256_z, p256_z);
ok = ok && test_p256_multiplier(p256_i, p256_gx, p256_gy);
ok = ok && test_p256_multiplier(p256_n, p256_z, p256_z);
if (!ok) {
led_off(LED_GREEN);
led_on(LED_RED);
}
toggle_yellow_led();
}
}
//
// this routine uses the hardware multiplier to obtain Q(qx,qy), which is the
// scalar multiple of the base point, qx and qy are then compared to the values
// px and py (correct result known in advance)
//
int test_p256_multiplier(const uint32_t *k, const uint32_t *px, const uint32_t *py)
{
int i, num_cyc;
uint32_t reg_control, reg_status;
uint32_t k_word, qx_word, qy_word;
// fill k
for (i=0; i<BUF_NUM_WORDS; i++) {
k_word = k[i];
fmc_write_32(CORE_ADDR_BUF_K + ((BUF_NUM_WORDS - (i + 1)) * sizeof(uint32_t)), &k_word);
}
// clear 'next' control bit, then set 'next' control bit again to trigger new operation
reg_control = 0;
fmc_write_32(CORE_ADDR_CONTROL, ®_control);
reg_control = CORE_CONTROL_BIT_NEXT;
fmc_write_32(CORE_ADDR_CONTROL, ®_control);
// wait for 'ready' status bit to be set
num_cyc = 0;
do {
num_cyc++;
fmc_read_32(CORE_ADDR_STATUS, ®_status);
}
while (!(reg_status & CORE_STATUS_BIT_READY));
// read back x and y word-by-word, then compare to the reference values
for (i=0; i<BUF_NUM_WORDS; i++) {
fmc_read_32(CORE_ADDR_BUF_X + (i * sizeof(uint32_t)), &qx_word);
fmc_read_32(CORE_ADDR_BUF_Y + (i * sizeof(uint32_t)), &qy_word);
if ((qx_word != px[BUF_NUM_WORDS - (i + 1)])) return 0;
if ((qy_word != py[BUF_NUM_WORDS - (i + 1)])) return 0;
}
// everything went just fine
return 1;
}
//
// toggle the yellow led to indicate that we're not stuck somewhere
//
void toggle_yellow_led(void)
{
static int led_state = 0;
led_state = !led_state;
if (led_state) led_on(LED_YELLOW);
else led_off(LED_YELLOW);
}
//
// end of file
//
|