diff options
Diffstat (limited to 'src/rtl/modexps6_wrapper.v')
| -rw-r--r-- | src/rtl/modexps6_wrapper.v | 396 |
1 files changed, 210 insertions, 186 deletions
diff --git a/src/rtl/modexps6_wrapper.v b/src/rtl/modexps6_wrapper.v index aa49261..89646d5 100644 --- a/src/rtl/modexps6_wrapper.v +++ b/src/rtl/modexps6_wrapper.v @@ -1,187 +1,211 @@ -module modexps6_wrapper
- ( - clk, reset_n, - cs, we,
- address, write_data, read_data - );
-
-
- //
- // Ports
- // - input wire clk; - input wire reset_n; - - input wire cs; - input wire we; - - input wire [ 9: 0] address; - input wire [31: 0] write_data; - output wire [31: 0] read_data;
-
-
- //
- // Address Decoder
- //
- localparam ADDR_MSB_REGS = 1'b0;
- localparam ADDR_MSB_CORE = 1'b1;
- wire address_msb = address[9];
- wire [ 8: 0] address_lsb = address[8:0];
-
-
- //
- // Output Mux
- //
- wire [31: 0] read_data_regs;
- wire [31: 0] read_data_core;
-
-
- // - // Registers - // - localparam ADDR_NAME0 = 9'h000; - localparam ADDR_NAME1 = 9'h001; - localparam ADDR_VERSION = 9'h002; - - localparam ADDR_CONTROL = 9'h008; // {next, init} - localparam ADDR_STATUS = 9'h009; // {valid, ready} - localparam ADDR_MODE = 9'h010; // 0 = slow secure, 1 = fast unsafe (public) - localparam ADDR_MODULUS_BITS = 9'h011; //
- localparam ADDR_EXPONENT_BITS = 9'h012; //
- localparam ADDR_GPIO_REG = 9'h020; // - - localparam CONTROL_INIT_BIT = 0; - localparam CONTROL_NEXT_BIT = 1; - - localparam STATUS_READY_BIT = 0; - localparam STATUS_VALID_BIT = 1; - - localparam CORE_NAME0 = 32'h6D6F6465; // "mode" - localparam CORE_NAME1 = 32'h78707336; // "xps6" - localparam CORE_VERSION = 32'h302E3130; // "0.10" - - - // - // Registers - // - reg [ 1: 0] reg_control; - reg reg_mode; - reg [12: 0] reg_modulus_width;
- reg [12: 0] reg_exponent_width;
- reg [31: 0] reg_gpio;
-
-
- //
- // Wires
- //
- wire [ 1: 0] reg_status;
-
-
- //
- // ModExpS6
- //
- modexps6_top #
- (
- .MAX_MODULUS_WIDTH (4096)
- )
- modexps6_core
- (
- .clk (clk),
-
- .init (reg_control[CONTROL_INIT_BIT]),
- .ready (reg_status[STATUS_READY_BIT]), - .next (reg_control[CONTROL_NEXT_BIT]),
- .valid (reg_status[STATUS_VALID_BIT]), - - .modulus_width (reg_modulus_width), - .exponent_width (reg_exponent_width), -
- .fast_public_mode (reg_mode),
- - .bus_cs (cs && (address_msb == ADDR_MSB_CORE)),
- .bus_we (we), - .bus_addr (address_lsb),
- .bus_data_wr (write_data),
- .bus_data_rd (read_data_core)
- );
-
-
- // - // Read Latch - // - reg [31: 0] tmp_read_data; -
- - // - // Read/Write Interface - // - always @(posedge clk) - // - if (!reset_n) begin - // - reg_control <= 2'b00; - reg_mode <= 1'b0; - reg_modulus_width <= 13'd1024; - reg_exponent_width <= 13'd1024; - // - end else if (cs && (address_msb == ADDR_MSB_REGS)) begin - // - if (we) begin - // - // Write Handler - // - case (address_lsb)
- // - ADDR_CONTROL: reg_control <= write_data[ 1: 0]; - ADDR_MODE: reg_mode <= write_data[0]; - ADDR_MODULUS_BITS: reg_modulus_width <= write_data[12: 0]; - ADDR_EXPONENT_BITS: reg_exponent_width <= write_data[12: 0];
- ADDR_GPIO_REG: reg_gpio <= write_data;
- // - endcase - // - end else begin - // - // Read Handler - // - case (address) - // - ADDR_NAME0: tmp_read_data <= CORE_NAME0; - ADDR_NAME1: tmp_read_data <= CORE_NAME1; - ADDR_VERSION: tmp_read_data <= CORE_VERSION; - ADDR_CONTROL: tmp_read_data <= {{30{1'b0}}, reg_control}; - ADDR_STATUS: tmp_read_data <= {{30{1'b0}}, reg_status}; - ADDR_MODE: tmp_read_data <= {{31{1'b0}}, reg_mode}; - ADDR_MODULUS_BITS: tmp_read_data <= {{19{1'b0}}, reg_modulus_width};
- ADDR_EXPONENT_BITS: tmp_read_data <= {{19{1'b0}}, reg_exponent_width};
- ADDR_GPIO_REG: tmp_read_data <= reg_gpio; - // - default: tmp_read_data <= 32'h00000000; - // - endcase - // - end - // - end
-
-
- //
- // Register / Core Memory Selector
- //
- reg address_msb_last;
- always @(posedge clk) address_msb_last = address_msb;
-
- reg [31: 0] read_data_mux;
- assign read_data = read_data_mux;
-
- always @(*)
- //
- case (address_msb_last)
- //
- ADDR_MSB_REGS: read_data_mux = tmp_read_data;
- ADDR_MSB_CORE: read_data_mux = read_data_core;
- //
- endcase
-
- +//====================================================================== +// +// Copyright (c) 2015, NORDUnet A/S All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// - Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// - Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the distribution. +// +// - Neither the name of the NORDUnet nor the names of its contributors may +// be used to endorse or promote products derived from this software +// without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS +// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED +// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +//====================================================================== + +module modexps6_wrapper + ( + input wire clk, + input wire reset_n, + + input wire cs, + input wire we, + + input wire [9: 0] address, + input wire [31: 0] write_data, + output wire [31: 0] read_data + ); + + + // + // Address Decoder + // + localparam ADDR_MSB_REGS = 1'b0; + localparam ADDR_MSB_CORE = 1'b1; + wire address_msb = address[9]; + wire [8: 0] address_lsb = address[8:0]; + + + // + // Output Mux + // + wire [31: 0] read_data_regs; + wire [31: 0] read_data_core; + + + // + // Registers + // + localparam ADDR_NAME0 = 9'h000; + localparam ADDR_NAME1 = 9'h001; + localparam ADDR_VERSION = 9'h002; + + localparam ADDR_CONTROL = 9'h008; // {next, init} + localparam ADDR_STATUS = 9'h009; // {valid, ready} + localparam ADDR_MODE = 9'h010; // 0 = slow secure, 1 = fast unsafe (public) + localparam ADDR_MODULUS_BITS = 9'h011; // + localparam ADDR_EXPONENT_BITS = 9'h012; // + localparam ADDR_GPIO_REG = 9'h020; // + + localparam CONTROL_INIT_BIT = 0; + localparam CONTROL_NEXT_BIT = 1; + + localparam STATUS_READY_BIT = 0; + localparam STATUS_VALID_BIT = 1; + + localparam CORE_NAME0 = 32'h6D6F6465; // "mode" + localparam CORE_NAME1 = 32'h78707336; // "xps6" + localparam CORE_VERSION = 32'h302E3130; // "0.10" + + + // + // Registers + // + reg [1: 0] reg_control; + reg reg_mode; + reg [12: 0] reg_modulus_width; + reg [12: 0] reg_exponent_width; + reg [31: 0] reg_gpio; + + + // + // Wires + // + wire [1: 0] reg_status; + + + // + // ModExpS6 + // + modexps6_top # + ( + .MAX_MODULUS_WIDTH (4096) + ) + modexps6_core + ( + .clk (clk), + + .init (reg_control[CONTROL_INIT_BIT]), + .ready (reg_status[STATUS_READY_BIT]), + .next (reg_control[CONTROL_NEXT_BIT]), + .valid (reg_status[STATUS_VALID_BIT]), + + .modulus_width (reg_modulus_width), + .exponent_width (reg_exponent_width), + + .fast_public_mode (reg_mode), + + .bus_cs (cs && (address_msb == ADDR_MSB_CORE)), + .bus_we (we), + .bus_addr (address_lsb), + .bus_data_wr (write_data), + .bus_data_rd (read_data_core) + ); + + + // + // Read Latch + // + reg [31: 0] tmp_read_data; + + + // + // Read/Write Interface + // + always @(posedge clk) + // + if (!reset_n) begin + // + reg_control <= 2'b00; + reg_mode <= 1'b0; + reg_modulus_width <= 13'd1024; + reg_exponent_width <= 13'd1024; + // + end else if (cs && (address_msb == ADDR_MSB_REGS)) begin + // + if (we) begin + // + // Write Handler + // + case (address_lsb) + // + ADDR_CONTROL: reg_control <= write_data[1: 0]; + ADDR_MODE: reg_mode <= write_data[0]; + ADDR_MODULUS_BITS: reg_modulus_width <= write_data[12: 0]; + ADDR_EXPONENT_BITS: reg_exponent_width <= write_data[12: 0]; + ADDR_GPIO_REG: reg_gpio <= write_data; + // + endcase + // + end else begin + // + // Read Handler + // + case (address) + // + ADDR_NAME0: tmp_read_data <= CORE_NAME0; + ADDR_NAME1: tmp_read_data <= CORE_NAME1; + ADDR_VERSION: tmp_read_data <= CORE_VERSION; + ADDR_CONTROL: tmp_read_data <= {{30{1'b0}}, reg_control}; + ADDR_STATUS: tmp_read_data <= {{30{1'b0}}, reg_status}; + ADDR_MODE: tmp_read_data <= {{31{1'b0}}, reg_mode}; + ADDR_MODULUS_BITS: tmp_read_data <= {{19{1'b0}}, reg_modulus_width}; + ADDR_EXPONENT_BITS: tmp_read_data <= {{19{1'b0}}, reg_exponent_width}; + ADDR_GPIO_REG: tmp_read_data <= reg_gpio; + // + default: tmp_read_data <= 32'h00000000; + // + endcase + // + end + // + end + + + // + // Register / Core Memory Selector + // + reg address_msb_last; + always @(posedge clk) address_msb_last = address_msb; + + reg [31: 0] read_data_mux; + assign read_data = read_data_mux; + + always @(*) + // + case (address_msb_last) + // + ADDR_MSB_REGS: read_data_mux = tmp_read_data; + ADDR_MSB_CORE: read_data_mux = read_data_core; + // + endcase + + endmodule |