path: root/src/rtl/modexp.v

//======================================================================
//
// modexp.v
// --------
// Modular exponentiation core for implementing public key algorithms
// such as RSA, DH, ElGamal etc.
//
// The core calculates the following function:
//
//   C = M ** e mod N
//
//   M is a message with a length of n bits
//   e is the exponent with a length of at most 32 bits
//   N is the modulus  with a length of n bits
//   n is can be 32 and up to and including 8192 bits in steps
//   of 32 bits.
//
// The core has a 32-bit memory like interface, but provides
// status signals to inform the system that a given operation
// has is done. Additionally, any errors will also be asserted.
//
//
// Author: Peter Magnusson, Joachim Strombergson
// Copyright (c) 2015, NORDUnet A/S All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// - Redistributions of source code must retain the above copyright notice,
//   this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
//   be used to endorse or promote products derived from this software
//   without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================

module modexp(
              input wire           clk,
              input wire           reset_n,

              input wire           cs,
              input wire           we,

              input wire  [11 : 0] address,
              input wire  [31 : 0] write_data,
              output wire [31 : 0] read_data
             );


  //----------------------------------------------------------------
  // Internal constant and parameter definitions.
  //----------------------------------------------------------------
  localparam GENERAL_PREFIX      = 4'h0;
  localparam ADDR_NAME0          = 8'h00;
  localparam ADDR_NAME1          = 8'h01;
  localparam ADDR_VERSION        = 8'h02;

  localparam ADDR_MODSIZE        = 8'h10;
  localparam ADDR_EXPONENT       = 8'h20;

  localparam MODULUS_PREFIX      = 4'h1;
  localparam ADDR_MODULUS_START  = 8'h00;
  localparam ADDR_MODULUS_END    = 8'hff;

  localparam EXPONENT_PREFIX     = 4'h2;
  localparam ADDR_EXPONENT_START = 8'h00;
  localparam ADDR_EXPONENT_END   = 8'hff;

  localparam MESSAGE_PREFIX      = 4'h3;
  localparam MESSAGE_START       = 8'h00;
  localparam MESSAGE_END         = 8'hff;

  localparam RESULT_PREFIX       = 4'h4;
  localparam RESULT_START        = 8'h00;
  localparam RESULT_END          = 8'hff;

  localparam LENGTH_PREFIX       = 4'h5;

  localparam DEFAULT_MODLENGTH   = 8'h80;
  localparam DEFAULT_EXPLENGTH   = 8'h80;

  localparam MONTPROD_SELECT_ONE_NR = 3'h0;
  localparam MONTPROD_SELECT_X_NR   = 3'h1;
  localparam MONTPROD_SELECT_Z_P    = 3'h2;
  localparam MONTPROD_SELECT_P_P    = 3'h3;
  localparam MONTPROD_SELECT_ONE_Z  = 3'h4;

  localparam MONTPROD_DEST_Z        = 2'b00;
  localparam MONTPROD_DEST_P        = 2'b01;
  localparam MONTPROD_DEST_NOWHERE  = 2'b10;

  localparam CTRL_IDLE           = 4'h0;
  localparam CTRL_RESIDUE        = 4'h1;
  localparam CTRL_CALCULATE_Z0   = 4'h2;
  localparam CTRL_CALCULATE_P0   = 4'h3;
  localparam CTRL_ITERATE        = 4'h4;
  localparam CTRL_ITERATE_Z_P    = 4'h5;
  localparam CTRL_ITERATE_P_P    = 4'h6;
  localparam CTRL_ITERATE_END    = 4'h7;
  localparam CTRL_CALCULATE_ZN   = 4'h8;
  localparam CTRL_DONE           = 4'h9;

  localparam CORE_NAME0          = 32'h72736120; // "rsa "
  localparam CORE_NAME1          = 32'h38313932; // "8192"
  localparam CORE_VERSION        = 32'h302e3031; // "0.01"


  //----------------------------------------------------------------
  // Registers including update variables and write enable.
  //----------------------------------------------------------------
  reg [07 : 0]  modulus_mem_int_rd_addr;
  wire [31 : 0] modulus_mem_int_rd_data;
  wire [31 : 0] modulus_mem_api_rd_data;
  reg           modulus_mem_api_we;

  reg [07 : 0]  message_mem_int_rd_addr;
  wire [31 : 0] message_mem_int_rd_data;
  wire [31 : 0] message_mem_api_rd_data;
  reg           message_mem_api_we;

  reg [07 : 0]  exponent_mem_int_rd_addr;
  wire [31 : 0] exponent_mem_int_rd_data;
  wire [31 : 0] exponent_mem_api_rd_data;
  reg           exponent_mem_api_we;

  wire [31 : 0] result_mem_api_rd_data;
  reg  [07 : 0] result_mem_int_rd_addr;
  wire [31 : 0] result_mem_int_rd_data;
  reg  [07 : 0] result_mem_int_wr_addr;
  reg  [31 : 0] result_mem_int_wr_data;
  reg           result_mem_int_we;

  reg          residue_calculator_start; //TODO not implemented yet
  reg          residue_calculator_ready; //TODO not implemented yet

  reg  [31 : 0] residue_mem [0 : 255];
  reg  [07 : 0] residue_mem_rd_addr;
  wire [31 : 0] residue_mem_rd_data;
  reg  [07 : 0] residue_mem_wr_addr;
  reg  [31 : 0] residue_mem_wr_data;
  reg           residue_mem_we;


  reg  [07 : 0] p_mem_rd0_addr;
  wire [31 : 0] p_mem_rd0_data;
  reg  [07 : 0] p_mem_rd1_addr;
  wire [31 : 0] p_mem_rd1_data;
  reg  [07 : 0] p_mem_wr_addr;
  reg  [31 : 0] p_mem_wr_data;
  reg           p_mem_we;

  reg [07 : 0] length_reg;
  reg [07 : 0] length_m1_reg;
  reg [07 : 0] length_new;
  reg [07 : 0] length_m1_new;
  reg          length_we;

  reg          start_reg;
  reg          start_new;
  reg          start_we;

  reg          ready_reg;
  reg          ready_new;
  reg          ready_we;

  reg [2 : 0]  montprod_select_reg;
  reg [2 : 0]  montprod_select_new;
  reg          montprod_select_we;
  reg [1 : 0]  montprod_dest_reg;
  reg [1 : 0]  montprod_dest_new;
  reg [1 : 0]  montprod_dest_we;

  reg [3 : 0]  modexp_ctrl_reg;
  reg [3 : 0]  modexp_ctrl_new;
  reg          modexp_ctrl_we;

  reg [31 : 0] one;
  reg [31 : 0] one_new;

  reg [12 : 0] loop_counter_reg;
  reg [12 : 0] loop_counter_new;
  reg [12 : 0] loop_counter_we;
  reg [07 : 0] E_word_index;
  reg [04 : 0] E_bit_index;
  reg          last_iteration;
  reg          ei_reg;
  reg          ei_new;
  reg          ei_we;

  //----------------------------------------------------------------
  // Wires.
  //----------------------------------------------------------------
  reg [31 : 0]  tmp_read_data;
  reg           tmp_error;

  reg           montprod_calc;
  wire          montprod_ready;
  reg [07 : 0]  montprod_length;

  wire [07 : 0] montprod_opa_addr;
  reg [31 : 0]  montprod_opa_data;

  wire [07 : 0] montprod_opb_addr;
  reg [31 : 0]  montprod_opb_data;

  wire [07 : 0] montprod_opm_addr;
  reg [31 : 0]  montprod_opm_data;

  wire [07 : 0] montprod_result_addr;
  wire [31 : 0] montprod_result_data;
  wire          montprod_result_we;


  //----------------------------------------------------------------
  // Concurrent connectivity for ports etc.
  //----------------------------------------------------------------
  assign read_data = tmp_read_data;


  //----------------------------------------------------------------
  // core instantiations.
  //----------------------------------------------------------------
  montprod montprod_inst(
                         .clk(clk),
                         .reset_n(reset_n),

                         .calculate(montprod_calc),
                         .ready(montprod_ready),

                         .length(montprod_length),

                         .opa_addr(montprod_opa_addr),
                         .opa_data(montprod_opa_data),

                         .opb_addr(montprod_opb_addr),
                         .opb_data(montprod_opb_data),

                         .opm_addr(montprod_opm_addr),
                         .opm_data(message_mem_int_rd_data),

                         .result_addr(montprod_result_addr),
                         .result_data(montprod_result_data),
                         .result_we(montprod_result_we)
                        );


  blockmem2r1w modulus_mem(
                           .clk(clk),
                           .read_addr0(modulus_mem_int_rd_addr),
                           .read_data0(modulus_mem_int_rd_data),
                           .read_addr1(address[7 : 0]),
                           .read_data1(modulus_mem_api_rd_data),
                           .wr(modulus_mem_api_we),
                           .write_addr(address[7 : 0]),
                           .write_data(write_data)
                          );


  blockmem2r1w message_mem(
                           .clk(clk),
                           .read_addr0(message_mem_int_rd_addr),
                           .read_data0(message_mem_int_rd_data),
                           .read_addr1(address[7 : 0]),
                           .read_data1(message_mem_api_rd_data),
                           .wr(message_mem_api_we),
                           .write_addr(address[7 : 0]),
                           .write_data(write_data)
                          );


  blockmem2r1w exponent_mem(
                           .clk(clk),
                           .read_addr0(exponent_mem_int_rd_addr),
                           .read_data0(exponent_mem_int_rd_data),
                           .read_addr1(address[7 : 0]),
                           .read_data1(exponent_mem_api_rd_data),
                           .wr(exponent_mem_api_we),
                           .write_addr(address[7 : 0]),
                           .write_data(write_data)
                           );


  blockmem2r1w result_mem(
                          .clk(clk),
                          .read_addr0(result_mem_int_rd_addr[7 : 0]),
                          .read_data0(result_mem_int_rd_data),
                          .read_addr1(address[7 : 0]),
                          .read_data1(result_mem_api_rd_data),
                          .wr(result_mem_int_we),
                          .write_addr(result_mem_int_wr_addr),
                          .write_data(result_mem_int_wr_data)
                         );

  blockmem2r1w p_mem(
                           .clk(clk),
                           .read_addr0(p_mem_rd0_addr),
                           .read_data0(p_mem_rd0_data),
                           .read_addr1(p_mem_rd1_addr),
                           .read_data1(p_mem_rd1_data),
                           .wr(p_mem_we),
                           .write_addr(p_mem_wr_addr),
                           .write_data(p_mem_wr_data)
                           );


  //----------------------------------------------------------------
  // reg_update
  //
  // Update functionality for all registers in the core.
  // All registers are positive edge triggered with asynchronous
  // active low reset. All registers have write enable.
  //----------------------------------------------------------------
  always @ (posedge clk or negedge reset_n)
    begin
      if (!reset_n)
        begin
          ready_reg           <= 1'b1;
          montprod_select_reg <= MONTPROD_SELECT_ONE_NR;
          montprod_dest_reg   <= MONTPROD_DEST_NOWHERE;
          modexp_ctrl_reg     <= CTRL_IDLE;
          one                 <= 32'h0;
          length_reg          <= 8'h0;
          length_m1_reg       <= 8'h0;
          loop_counter_reg    <= 13'b0;
          ei_reg              <= 1'b0;
        end
      else
        begin
          if (ready_we)
            ready_reg <= ready_new;

          if (montprod_select_we)
            montprod_select_reg <= montprod_select_new;

          if (montprod_dest_we)
            montprod_dest_reg <= montprod_dest_new;

          if (modexp_ctrl_we)
            modexp_ctrl_reg <= modexp_ctrl_new;

          if (length_we)
            begin
              length_reg <= length_new;
              length_m1_reg <= length_m1_new;
            end

          if (loop_counter_we)
            loop_counter_reg <= loop_counter_new;

          if (ei_we)
            ei_reg <= ei_new;

          one <= one_new;
        end
    end // reg_update


  //----------------------------------------------------------------
  // api
  //
  // The interface command decoding logic.
  //----------------------------------------------------------------
  always @*
    begin : api
      modulus_mem_api_we  = 1'b0;
      exponent_mem_api_we = 1'b0;
      message_mem_api_we  = 1'b0;
      tmp_read_data       = 32'h00000000;

      length_new = write_data[7 : 0];
      length_m1_new = write_data[7 : 0] - 8'h1;
      length_we = 1'b0;

      if (cs)
        begin
          case (address[11 : 8])
            GENERAL_PREFIX:
              begin
//                if (we)
//                  begin
//                    case (address)
//                      // Write operations.
//                      ADDR_MODSIZE:
//                        begin
//                          modsize_we  = 1;
//                        end
//
//                      ADDR_EXPONENT:
//                        begin
//                          exponent_we = 1;
//                        end
//
//                      default:
//                        begin
//                          tmp_error = 1;
//                        end
//                    endcase // case (addr)
//                  end // if (write_read)
//                else
//                  begin
//                    case (address)
//                      // Read operations.
//                      ADDR_NAME0:
//                        begin
//                          tmp_read_data = CORE_NAME0;
//                        end
//
//                      ADDR_NAME1:
//                        begin
//                          tmp_read_data = CORE_NAME1;
//                        end
//
//                      ADDR_VERSION:
//                        begin
//                          tmp_read_data = CORE_VERSION;
//                        end
//
//                      ADDR_MODSIZE:
//                        begin
//                          tmp_read_data = {28'h0000000, modsize_reg};
//                        end
//
//                      default:
//                        begin
//                          tmp_error = 1;
//                        end
//                    endcase // case (addr)
//                  end
              end

            MODULUS_PREFIX:
              begin
                if (we)
                  begin
                    modulus_mem_api_we = 1'b1;
                  end
                else
                  begin
                    tmp_read_data = modulus_mem_api_rd_data;
                  end
              end

            EXPONENT_PREFIX:
              begin
                if (we)
                  begin
                    exponent_mem_api_we = 1'b1;
                  end
                else
                  begin
                    tmp_read_data = exponent_mem_api_rd_data;
                  end
              end

            MESSAGE_PREFIX:
              begin
                if (we)
                  begin
                    message_mem_api_we = 1'b1;
                  end
                else
                  begin
                    tmp_read_data = message_mem_api_rd_data;
                  end
              end

            RESULT_PREFIX:
              begin
                tmp_read_data = result_mem_api_rd_data;
              end

            LENGTH_PREFIX:
              begin
                if (we)
                  length_we = 1'b1;
              end

//            RESULT_PREFIX:
//              begin
//                if (we)
//                  begin
//                    modulus_mem_api_we = 1'b1;
//                  end
//                else
//                  begin
//                    tmp_read_data = modulus_mem_int_rd_data;
//                  end
//              end

            default:
              begin

              end
          endcase // case (address[11 : 8])
        end // if (cs)
    end // api


  //----------------------------------------------------------------
  // montprod_op_select
  //
  // Select operands used during montprod calculations depending
  // on what operation we want to do
  //----------------------------------------------------------------
  always @*
    begin : montprod_op_select
      message_mem_int_rd_addr  = montprod_opa_addr;
      p_mem_rd0_addr           = montprod_opa_addr;

      residue_mem_rd_addr      = montprod_opb_addr;
      p_mem_rd1_addr           = montprod_opb_addr;

      modulus_mem_int_rd_addr  = montprod_opm_addr;

      montprod_opa_data        = 32'h00000000;
      montprod_opb_data        = 32'h00000000;

      if (montprod_opa_addr == length_m1_reg)
        one_new = 32'h00000001;
      else
        one_new = 32'h00000000;

      case (montprod_select_reg)
        MONTPROD_SELECT_ONE_NR:
          begin
            montprod_opa_data       = one;
            montprod_opb_data       = residue_mem_rd_data;
          end

        MONTPROD_SELECT_X_NR:
          begin
            montprod_opa_data       = message_mem_int_rd_data;
            montprod_opb_data       = residue_mem_rd_data;
          end

        MONTPROD_SELECT_Z_P:
          begin
            montprod_opa_data       = result_mem_int_rd_data;
            montprod_opb_data       = p_mem_rd1_data;
          end

        MONTPROD_SELECT_P_P:
          begin
            montprod_opa_data       = p_mem_rd0_data;
            montprod_opb_data       = p_mem_rd1_data;
          end

        MONTPROD_SELECT_ONE_Z:
          begin
            montprod_opa_data       = one;
            montprod_opb_data       = result_mem_int_rd_data;
          end

        default:
          begin
          end
      endcase // case (montprod_selcect_reg)
    end

  //----------------------------------------------------------------
  // memory write mux
  //
  // direct memory write signals to correct memory
  //----------------------------------------------------------------
  always @*
    begin : memory_write_process
      result_mem_int_wr_addr = montprod_result_addr;
      result_mem_int_wr_data = montprod_result_data;
      result_mem_int_we      = 1'b0;

      p_mem_wr_addr = montprod_result_addr;
      p_mem_wr_data = montprod_result_data;
      p_mem_we      = 1'b0;

      case (montprod_dest_reg)
        MONTPROD_DEST_Z:
          result_mem_int_we = montprod_result_we;
        MONTPROD_DEST_P:
          p_mem_we = montprod_result_we;
        default:
          begin
          end
      endcase

      // inhibit Z=Z*P when ei = 0
      if (modexp_ctrl_reg == CTRL_ITERATE_Z_P)
        result_mem_int_we = result_mem_int_we & ei_reg;
    end

  //----------------------------------------------------------------
  // loop_counter
  //
  // Calculate the loop counter and related variables
  //----------------------------------------------------------------
  always @*
    begin : loop_counters_process
      E_bit_index      = loop_counter_reg[ 04 : 0 ];

      if (loop_counter_reg == { length_m1_reg, 5'b11111 })
        last_iteration = 1'b1;
      else
        last_iteration = 1'b0;

      case (modexp_ctrl_reg)
        CTRL_CALCULATE_P0:
          begin
            loop_counter_new = 13'b0;
            loop_counter_we  = 1'b1;
          end

        CTRL_ITERATE_END:
          begin
            loop_counter_new = loop_counter_reg + 1'b1;
            loop_counter_we  = 1'b1;
          end

        default:
          begin
            loop_counter_new = 13'b0;
            loop_counter_we  = 1'b0;
          end

      endcase
    end

  //----------------------------------------------------------------
  // exponent
  //
  // reads the exponent
  //----------------------------------------------------------------
  always @*
    begin : exponent_process
      // accessing new instead of reg - pick up update at CTRL_ITERATE_NEW to remove a pipeline stall
      E_word_index  = loop_counter_new[ 12 : 5 ];

      exponent_mem_int_rd_addr = E_word_index;

      ei_new = exponent_mem_int_rd_data[ E_bit_index ];

      if (modexp_ctrl_reg == CTRL_ITERATE)
        ei_we = 1'b1;
      else
        ei_we = 1'b0;
    end

  //----------------------------------------------------------------
  // modexp_ctrl
  //
  // Control FSM logic needed to perform the modexp operation.
  //----------------------------------------------------------------
  always @*
    begin
      ready_new           = 0;
      ready_we            = 0;
      montprod_select_new = MONTPROD_SELECT_ONE_NR;
      montprod_select_we  = 0;
      montprod_dest_new   = MONTPROD_DEST_NOWHERE;
      montprod_dest_we    = 0;
      montprod_calc       = 0;
      modexp_ctrl_new     = CTRL_IDLE;
      modexp_ctrl_we      = 0;

      residue_calculator_start = 1'b0;

      case (modexp_ctrl_reg)
        CTRL_IDLE:
          begin
            ready_new           = 0;
            ready_we            = 1;
            if (start_reg == 1'b1)
              begin
                modexp_ctrl_new = CTRL_RESIDUE;
                modexp_ctrl_we  = 1;
                residue_calculator_start = 1'b1;
              end
          end

        CTRL_RESIDUE:
          begin
            if (residue_calculator_ready == 1'b1)
              begin
                montprod_select_new = MONTPROD_SELECT_ONE_NR;
                montprod_select_we  = 1;
                montprod_dest_new   = MONTPROD_DEST_Z;
                montprod_dest_we    = 1;
                montprod_calc       = 1;
                modexp_ctrl_new = CTRL_CALCULATE_Z0;
                modexp_ctrl_we  = 1;
              end
          end

        CTRL_CALCULATE_Z0:
          begin
            if (montprod_ready == 1'b1)
              begin
                montprod_select_new = MONTPROD_SELECT_X_NR;
                montprod_select_we  = 1;
                montprod_dest_new   = MONTPROD_DEST_P;
                montprod_dest_we    = 1;
                montprod_calc       = 1;
                modexp_ctrl_new = CTRL_CALCULATE_P0;
                modexp_ctrl_we  = 1;
              end
          end

        CTRL_CALCULATE_P0:
          begin
            if (montprod_ready == 1'b1)
              begin
                modexp_ctrl_new = CTRL_ITERATE;
                modexp_ctrl_we  = 1;
              end
          end

        CTRL_ITERATE:
          begin
            montprod_select_new = MONTPROD_SELECT_Z_P;
            montprod_select_we  = 1;
            montprod_dest_new   = MONTPROD_DEST_Z;
            montprod_dest_we    = 1;
            montprod_calc       = 1;
            modexp_ctrl_new = CTRL_ITERATE_Z_P;
            modexp_ctrl_we  = 1;
          end

        CTRL_ITERATE_Z_P:
            if (montprod_ready == 1'b1)
              begin
                montprod_select_new = MONTPROD_SELECT_P_P;
                montprod_select_we  = 1;
                montprod_dest_new   = MONTPROD_DEST_P;
                montprod_dest_we    = 1;
                montprod_calc       = 1;
                modexp_ctrl_new = CTRL_ITERATE_P_P;
                modexp_ctrl_we  = 1;
              end

        CTRL_ITERATE_P_P:
            if (montprod_ready == 1'b1)
              begin
                modexp_ctrl_new = CTRL_ITERATE_END;
                modexp_ctrl_we  = 1;
              end

        CTRL_ITERATE_END:
          begin
            if (last_iteration == 1'b0)
              begin
                modexp_ctrl_new = CTRL_ITERATE;
                modexp_ctrl_we  = 1;
              end
            else
              begin
                montprod_select_new = MONTPROD_SELECT_ONE_Z;
                montprod_select_we  = 1;
                montprod_calc       = 1;
                modexp_ctrl_new = CTRL_CALCULATE_ZN;
                modexp_ctrl_we  = 1;
              end
          end

        CTRL_CALCULATE_ZN:
          begin
            if (montprod_ready == 1'b1)
              begin
                modexp_ctrl_new = CTRL_DONE;
                modexp_ctrl_we  = 1;
              end
          end

        CTRL_DONE:
          begin
            ready_new           = 1;
            ready_we            = 1;
            modexp_ctrl_new     = CTRL_IDLE;
            modexp_ctrl_we      = 1;
          end

        default:
          begin
          end

      endcase // case (modexp_ctrl_reg)
    end

endmodule // modexp

//======================================================================
// EOF modexp.v
//======================================================================