aboutsummaryrefslogtreecommitdiff
path: root/src/tb
diff options
context:
space:
mode:
Diffstat (limited to 'src/tb')
-rw-r--r--src/tb/tb_montprod.v142
1 files changed, 73 insertions, 69 deletions
diff --git a/src/tb/tb_montprod.v b/src/tb/tb_montprod.v
index e581e36..2cadd78 100644
--- a/src/tb/tb_montprod.v
+++ b/src/tb/tb_montprod.v
@@ -50,14 +50,15 @@ module tb_montprod();
parameter CLK_HALF_PERIOD = 2;
parameter CLK_PERIOD = 2 * CLK_HALF_PERIOD;
- parameter SHOW_INIT = 0;
- parameter DUMP_MEM = 0;
- parameter DEBUG = 0;
- parameter SHOW_WRITE_MEM = 0;
- parameter SHOW_S_MONITOR = 0;
- parameter SHOW_BQ_DEBUG = 0;
- parameter SHOW_FSM_STATUS = 0;
- parameter DISPLAY_TEST_CYCLES = 1;
+ parameter SHOW_INIT = 0;
+ parameter DUMP_MEM = 0;
+ parameter DEBUG = 0;
+ parameter SHOW_WRITE_MEM = 0;
+ parameter SHOW_WRITE_RESULT_MEM = 0;
+ parameter SHOW_S_MONITOR = 0;
+ parameter SHOW_BQ_DEBUG = 0;
+ parameter SHOW_FSM_STATUS = 0;
+ parameter DISPLAY_TEST_CYCLES = 1;
parameter WAIT_TIMEOUT = 100000000;
@@ -65,10 +66,6 @@ module tb_montprod();
//----------------------------------------------------------------
// Register and Wire declarations.
//----------------------------------------------------------------
- reg [31 : 0] test_cycle_ctr;
- reg test_cycle_ctr_rst;
- reg test_cycle_ctr_inc;
-
reg tb_clk;
reg tb_reset_n;
reg tb_calculate;
@@ -84,6 +81,10 @@ module tb_montprod();
wire [31 : 0] tb_result_data;
wire tb_result_we;
+ reg [31 : 0] test_cycle_ctr;
+ reg test_cycle_ctr_rst;
+ reg test_cycle_ctr_inc;
+
reg [31 : 0] tb_a [0 : 255]; //tb_opa_data
reg [31 : 0] tb_b [0 : 255]; //tb_opb_data reads here
reg [31 : 0] tb_m [0 : 255]; //tb_opm_data reads here
@@ -92,6 +93,7 @@ module tb_montprod();
integer test_mont_prod_success;
integer test_mont_prod_fail;
+
//----------------------------------------------------------------
// Device Under Test.
//----------------------------------------------------------------
@@ -113,10 +115,8 @@ module tb_montprod();
);
-
//----------------------------------------------------------------
// clk_gen
- //
// Clock generator process.
//----------------------------------------------------------------
always
@@ -175,70 +175,36 @@ module tb_montprod();
//----------------------------------------------------------------
- // reset_dut()
- //
- // Toggles reset to force the DUT into a well defined state.
- //----------------------------------------------------------------
- task reset_dut();
- begin
- $display("*** Toggle reset.");
- tb_reset_n = 0;
- #(2 * CLK_PERIOD);
- tb_reset_n = 1;
- end
- endtask // reset_dut
-
-
- //----------------------------------------------------------------
- // init_sim()
- //
- // Initialize all counters and testbed functionality as well
- // as setting the DUT inputs to defined values.
- //----------------------------------------------------------------
- task init_sim();
- begin
- $display("*** init_sim");
- tb_clk = 0;
- tb_reset_n = 0;
- tb_length = 0;
- tb_calculate = 0;
- test_mont_prod_success = 0;
- test_mont_prod_fail = 0;
- end
- endtask // init_sim
-
-
- //----------------------------------------------------------------
- // dump_test_memory
+ // read_test_memory
//----------------------------------------------------------------
always @(posedge tb_clk)
- begin : dump_test_memory
+ begin : read_test_memory
tb_opa_data <= tb_a[tb_opa_addr];
tb_opb_data <= tb_b[tb_opb_addr];
tb_opm_data <= tb_m[tb_opm_addr];
if (DUMP_MEM)
- $display("a %x %x b %x %x m %x %x", tb_opa_addr, tb_a[tb_opa_addr],
- tb_opb_addr, tb_b[tb_opb_addr], tb_opm_addr, tb_m[tb_opm_addr]);
+ $display("a %x %x b %x %x m %x %x", tb_opa_addr, tb_a[tb_opa_addr], tb_opb_addr, tb_b[tb_opb_addr], tb_opm_addr, tb_m[tb_opm_addr]);
end
//----------------------------------------------------------------
- // write_test_memory
+ // write_result_memory
//----------------------------------------------------------------
always @*
- begin : write_test_memory
- if (SHOW_WRITE_MEM)
- if (tb_result_we == 1'b1)
- begin
- $display("write %d: %x", tb_result_addr, tb_result_data);
- tb_r[tb_result_addr] = tb_result_data;
- end
- end
+ begin : write_result_memory
+ if (tb_result_we == 1'b1)
+ begin
+ tb_r[tb_result_addr] = tb_result_data;
+
+ if (SHOW_WRITE_RESULT_MEM)
+ $display("write result mnen 0x%02%x: 0x%08x", tb_result_addr, tb_result_data);
+ end
+ end
//----------------------------------------------------------------
- // S monitor
+ // s_monitor
//----------------------------------------------------------------
always @ (posedge tb_clk)
begin : s_monitor
@@ -258,18 +224,18 @@ module tb_montprod();
always @ (posedge tb_clk)
begin : bq_debug
if (SHOW_BQ_DEBUG)
- if (dut.montprod_ctrl_reg == dut.CTRL_L_CALC_SM)
- $display("====================> B: %x Q: %x B_bit_index_reg: %x <=====================",
- dut.b_reg, dut.q_reg, dut.B_bit_index_reg);
+ begin
+ if (dut.montprod_ctrl_reg == dut.CTRL_L_CALC_SM)
+ $display("====================> B: %x Q: %x B_bit_index_reg: %x <=====================", dut.b_reg, dut.q_reg, dut.B_bit_index_reg);
+ end
end
//----------------------------------------------------------------
- // fmsm_debug
- // Display control FSM status.
+ // fsm_monitor
//----------------------------------------------------------------
always @ (posedge tb_clk)
- begin : fsm_debug
+ begin : fsm_monitor
if (SHOW_FSM_STATUS)
if (dut.montprod_ctrl_we)
case (dut.montprod_ctrl_new)
@@ -302,6 +268,40 @@ module tb_montprod();
//----------------------------------------------------------------
+ // reset_dut()
+ //
+ // Toggles reset to force the DUT into a well defined state.
+ //----------------------------------------------------------------
+ task reset_dut();
+ begin
+ $display("*** Toggle reset.");
+ tb_reset_n = 0;
+ #(2 * CLK_PERIOD);
+ tb_reset_n = 1;
+ end
+ endtask // reset_dut
+
+
+ //----------------------------------------------------------------
+ // init_sim()
+ //
+ // Initialize all counters and testbed functionality as well
+ // as setting the DUT inputs to defined values.
+ //----------------------------------------------------------------
+ task init_sim();
+ begin
+ $display("*** init_sim");
+ tb_clk = 0;
+ tb_reset_n = 0;
+ tb_length = 0;
+ tb_calculate = 0;
+ test_mont_prod_success = 0;
+ test_mont_prod_fail = 0;
+ end
+ endtask // init_sim
+
+
+ //----------------------------------------------------------------
// wait_ready()
//
// Wait for the ready flag in the dut to be set.
@@ -333,6 +333,10 @@ module tb_montprod();
//----------------------------------------------------------------
+ // signal_calculate()
+ //
+ // Start the montgomery calculation by pulling the calculate
+ // flag to the dut.
//----------------------------------------------------------------
task signal_calculate();
begin
@@ -495,7 +499,7 @@ module tb_montprod();
reset_dut();
short_tests();
- long_tests();
+// long_tests();
$display(" -- Testbench for montprod done. --");
$display(" tests success: %d", test_mont_prod_success);