//------------------------------------------------------------------------------
//
// mw_mover.v
// -----------------------------------------------------------------------------
// Multi-word data mover.
//
// Authors: Pavel Shatov
//
// Copyright (c) 2015-2016, NORDUnet A/S
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// - Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may be
// used to endorse or promote products derived from this software without
// specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
//------------------------------------------------------------------------------
module mw_mover
(
clk, rst_n,
ena, rdy,
x_addr, y_addr, y_wren,
x_din, y_dout
);
//
// Parameters
//
parameter WORD_COUNTER_WIDTH = 3;
parameter OPERAND_NUM_WORDS = 8;
//
// Handy Numbers
//
localparam [WORD_COUNTER_WIDTH-1:0] WORD_INDEX_ZERO = 0;
localparam [WORD_COUNTER_WIDTH-1:0] WORD_INDEX_LAST = OPERAND_NUM_WORDS - 1;
//
// Handy Functions
//
function [WORD_COUNTER_WIDTH-1:0] WORD_INDEX_NEXT_OR_ZERO;
input [WORD_COUNTER_WIDTH-1:0] WORD_INDEX_CURRENT;
begin
WORD_INDEX_NEXT_OR_ZERO = (WORD_INDEX_CURRENT < WORD_INDEX_LAST) ?
WORD_INDEX_CURRENT + 1'b1 : WORD_INDEX_ZERO;
end
endfunction
//
// Ports
//
input clk; // system clock
input rst_n; // active-low async reset
input ena; // enable input
output rdy; // ready output
output [WORD_COUNTER_WIDTH-1:0] x_addr; // address of current X word
output [WORD_COUNTER_WIDTH-1:0] y_addr; // address of current Y word
output y_wren; // store current Y word
input [ 32-1:0] x_din; // current X word
output [ 32-1:0] y_dout; // current Y word
//
// Word Indices
//
reg [WORD_COUNTER_WIDTH-1:0] index_x;
reg [WORD_COUNTER_WIDTH-1:0] index_y;
//
// Output Mapping
//
assign x_addr = index_x;
assign y_addr = index_y;
//
// FSM
//
localparam FSM_SHREG_WIDTH = 1 * OPERAND_NUM_WORDS + 2;
localparam [FSM_SHREG_WIDTH-1:0] FSM_SHREG_INIT = {{(FSM_SHREG_WIDTH-1){1'b0}}, 1'b1};
reg [FSM_SHREG_WIDTH-1:0] fsm_shreg = FSM_SHREG_INIT;
assign rdy = fsm_shreg[0];
wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_inc_index_x = fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 1) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 0)];
wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_inc_index_y = fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 2) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 1)];
wire inc_index_x = |fsm_shreg_inc_index_x;
wire inc_index_y = |fsm_shreg_inc_index_y;
wire store_word_y = |fsm_shreg_inc_index_x;
always @(posedge clk or negedge rst_n)
//
if (rst_n == 1'b0) fsm_shreg <= FSM_SHREG_INIT;
else begin
if (rdy) fsm_shreg <= {ena, {FSM_SHREG_WIDTH-2{1'b0}}, ~ena};
else fsm_shreg <= {1'b0, fsm_shreg[FSM_SHREG_WIDTH-1:1]};
end
//
// Word Index Increment Logic
//
always @(posedge clk)
//
if (rdy) begin
index_x <= WORD_INDEX_ZERO;
index_y <= WORD_INDEX_ZERO;
end else begin
if (inc_index_x) index_x <= WORD_INDEX_NEXT_OR_ZERO(index_x);
if (inc_index_y) index_y <= WORD_INDEX_NEXT_OR_ZERO(index_y);
end
//
// Write Enable Logic
//
reg y_wren_reg;
assign y_wren = y_wren_reg;
always @(posedge clk)
//
if (rdy) y_wren_reg <= 1'b0;
else y_wren_reg <= store_word_y;
//
// Output Logic
//
assign y_dout = x_din;
endmodule
//------------------------------------------------------------------------------
// End-of-File
//------------------------------------------------------------------------------