From 4baf9508cb87d21b022cd30d2e044c8dbc62d11d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Joachim=20Stro=CC=88mbergson?= Date: Wed, 19 Feb 2014 13:46:19 +0100 Subject: Adding a testbench for the SHA256 top level wrapper. --- src/tb/tb_sha256.v | 554 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 554 insertions(+) create mode 100644 src/tb/tb_sha256.v diff --git a/src/tb/tb_sha256.v b/src/tb/tb_sha256.v new file mode 100644 index 0000000..eaee522 --- /dev/null +++ b/src/tb/tb_sha256.v @@ -0,0 +1,554 @@ +//====================================================================== +// +// tb_sha256.v +// ----------- +// Testbench for the SHA-256 top level wrapper. +// +// +// Author: Joachim Strombergson +// Copyright (c) 2014, SUNET +// +// Redistribution and use in source and binary forms, with or +// without modification, are permitted provided that the following +// conditions are met: +// +// 1. Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in +// the documentation and/or other materials provided with the +// distribution. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +//====================================================================== + +//------------------------------------------------------------------ +// Simulator directives. +//------------------------------------------------------------------ +`timescale 1ns/10ps + + +//------------------------------------------------------------------ +// Test module. +//------------------------------------------------------------------ +module tb_sha256(); + + //---------------------------------------------------------------- + // Internal constant and parameter definitions. + //---------------------------------------------------------------- + parameter DEBUG = 0; + + parameter CLK_HALF_PERIOD = 2; + + // The address map. + parameter ADDR_NAME0 = 8'h00; + parameter ADDR_NAME1 = 8'h01; + parameter ADDR_VERSION = 8'h02; + + parameter ADDR_CTRL = 8'h08; + parameter CTRL_INIT_VALUE = 8'h01; + parameter CTRL_NEXT_VALUE = 8'h02; + + parameter ADDR_STATUS = 8'h09; + parameter STATUS_READY_BIT = 0; + parameter STATUS_VALID_BIT = 1; + + parameter ADDR_BLOCK0 = 8'h10; + parameter ADDR_BLOCK1 = 8'h11; + parameter ADDR_BLOCK2 = 8'h12; + parameter ADDR_BLOCK3 = 8'h13; + parameter ADDR_BLOCK4 = 8'h14; + parameter ADDR_BLOCK5 = 8'h15; + parameter ADDR_BLOCK6 = 8'h16; + parameter ADDR_BLOCK7 = 8'h17; + parameter ADDR_BLOCK8 = 8'h18; + parameter ADDR_BLOCK9 = 8'h19; + parameter ADDR_BLOCK10 = 8'h1a; + parameter ADDR_BLOCK11 = 8'h1b; + parameter ADDR_BLOCK12 = 8'h1c; + parameter ADDR_BLOCK13 = 8'h1d; + parameter ADDR_BLOCK14 = 8'h1e; + parameter ADDR_BLOCK15 = 8'h1f; + + parameter ADDR_DIGEST0 = 8'h20; + parameter ADDR_DIGEST1 = 8'h21; + parameter ADDR_DIGEST2 = 8'h22; + parameter ADDR_DIGEST3 = 8'h23; + parameter ADDR_DIGEST4 = 8'h24; + parameter ADDR_DIGEST5 = 8'h25; + parameter ADDR_DIGEST6 = 8'h26; + parameter ADDR_DIGEST7 = 8'h27; + + + //---------------------------------------------------------------- + // Register and Wire declarations. + //---------------------------------------------------------------- + reg [31 : 0] cycle_ctr; + reg [31 : 0] error_ctr; + reg [31 : 0] tc_ctr; + + reg tb_clk; + reg tb_reset_n; + reg tb_cs; + reg tb_write_read; + reg [7 : 0] tb_address; + reg [31 : 0] tb_data_in; + wire [31 : 0] tb_data_out; + wire tb_error; + + reg [31 : 0] read_data; + reg [255 : 0] digest_data; + + + //---------------------------------------------------------------- + // Device Under Test. + //---------------------------------------------------------------- + sha256 dut( + .clk(tb_clk), + .reset_n(tb_reset_n), + + .cs(tb_cs), + .write_read(tb_write_read), + + + .address(tb_address), + .data_in(tb_data_in), + .data_out(tb_data_out), + .error(tb_error) + ); + + + //---------------------------------------------------------------- + // clk_gen + // + // Clock generator process. + //---------------------------------------------------------------- + always + begin : clk_gen + #CLK_HALF_PERIOD tb_clk = !tb_clk; + end // clk_gen + + + //---------------------------------------------------------------- + // sys_monitor + // + // Generates a cycle counter and displays information about + // the dut as needed. + //---------------------------------------------------------------- + always + begin : sys_monitor + #(2 * CLK_HALF_PERIOD); + cycle_ctr = cycle_ctr + 1; + end + + + //---------------------------------------------------------------- + // dump_dut_state() + // + // Dump the state of the dump when needed. + //---------------------------------------------------------------- + task dump_dut_state(); + begin + $display("State of DUT"); + $display("------------"); + $display("Inputs and outputs:"); + $display("cs = 0x%01x, write_read = 0x%01x", + dut.cs, dut.write_read); + $display("address = 0x%02x", dut.address); + $display("data_in = 0x%08x, data_out = 0x%08x", + dut.data_in, dut.data_out); + $display("tmp_data_out = 0x%08x", dut.tmp_data_out); + $display(""); + + $display("Control and status:"); + $display("ctrl = 0x%02x, status = 0x%02x", + {dut.next_reg, dut.init_reg}, + {dut.digest_valid_reg, dut.ready_reg}); + $display(""); + + $display("Message block:"); + $display("block0 = 0x%08x, block1 = 0x%08x, block2 = 0x%08x, block3 = 0x%08x", + dut.block0_reg, dut.block1_reg, dut.block2_reg, dut.block3_reg); + $display("block4 = 0x%08x, block5 = 0x%08x, block6 = 0x%08x, block7 = 0x%08x", + dut.block4_reg, dut.block5_reg, dut.block6_reg, dut.block7_reg); + + $display("block8 = 0x%08x, block9 = 0x%08x, block10 = 0x%08x, block11 = 0x%08x", + dut.block8_reg, dut.block9_reg, dut.block10_reg, dut.block11_reg); + $display("block12 = 0x%08x, block13 = 0x%08x, block14 = 0x%08x, block15 = 0x%08x", + dut.block12_reg, dut.block13_reg, dut.block14_reg, dut.block15_reg); + $display(""); + + $display("Digest:"); + $display("digest = 0x%064x", dut.digest_reg); + $display(""); + + end + endtask // dump_dut_state + + + //---------------------------------------------------------------- + // reset_dut() + // + // Toggles reset to force the DUT into a well defined state. + //---------------------------------------------------------------- + task reset_dut(); + begin + $display("*** Toggle reset."); + tb_reset_n = 0; + #(4 * CLK_HALF_PERIOD); + tb_reset_n = 1; + end + endtask // reset_dut + + + //---------------------------------------------------------------- + // init_sim() + // + // Initialize all counters and testbed functionality as well + // as setting the DUT inputs to defined values. + //---------------------------------------------------------------- + task init_sim(); + begin + cycle_ctr = 32'h00000000; + error_ctr = 32'h00000000; + tc_ctr = 32'h00000000; + + tb_clk = 0; + tb_reset_n = 0; + tb_cs = 0; + tb_write_read = 0; + tb_address = 6'h00; + tb_data_in = 32'h00000000; + end + endtask // init_dut + + + //---------------------------------------------------------------- + // display_test_result() + // + // Display the accumulated test results. + //---------------------------------------------------------------- + task display_test_result(); + begin + if (error_ctr == 0) + begin + $display("*** All %02d test cases completed successfully.", tc_ctr); + end + else + begin + $display("*** %02d test cases completed.", tc_ctr); + $display("*** %02d errors detected during testing.", error_ctr); + end + end + endtask // display_test_result + + + //---------------------------------------------------------------- + // wait_ready() + // + // Wait for the ready flag in the dut to be set. + // (Actually we wait for either ready or valid to be set.) + // + // Note: It is the callers responsibility to call the function + // when the dut is actively processing and will in fact at some + // point set the flag. + //---------------------------------------------------------------- + task wait_ready(); + begin + read_data = 0; + + while (read_data == 0) + begin + read_word(ADDR_STATUS); + end + end + endtask // wait_ready + + + //---------------------------------------------------------------- + // write_word() + // + // Write the given word to the DUT using the DUT interface. + //---------------------------------------------------------------- + task write_word(input [7 : 0] address, + input [31 : 0] word); + begin + if (DEBUG) + begin + $display("*** Writing 0x%08x to 0x%02x.", word, address); + $display(""); + end + + tb_address = address; + tb_data_in = word; + tb_cs = 1; + tb_write_read = 1; + #(2 * CLK_HALF_PERIOD); + tb_cs = 0; + tb_write_read = 0; + end + endtask // write_word + + + //---------------------------------------------------------------- + // write_block() + // + // Write the given block to the dut. + //---------------------------------------------------------------- + task write_block(input [511 : 0] block); + begin + write_word(ADDR_BLOCK0, block[511 : 480]); + write_word(ADDR_BLOCK1, block[479 : 448]); + write_word(ADDR_BLOCK2, block[447 : 416]); + write_word(ADDR_BLOCK3, block[415 : 384]); + write_word(ADDR_BLOCK4, block[383 : 352]); + write_word(ADDR_BLOCK5, block[351 : 320]); + write_word(ADDR_BLOCK6, block[319 : 288]); + write_word(ADDR_BLOCK7, block[287 : 256]); + write_word(ADDR_BLOCK8, block[255 : 224]); + write_word(ADDR_BLOCK9, block[223 : 192]); + write_word(ADDR_BLOCK10, block[191 : 160]); + write_word(ADDR_BLOCK11, block[159 : 128]); + write_word(ADDR_BLOCK12, block[127 : 96]); + write_word(ADDR_BLOCK13, block[95 : 64]); + write_word(ADDR_BLOCK14, block[63 : 32]); + write_word(ADDR_BLOCK15, block[31 : 0]); + end + endtask // write_block + + + //---------------------------------------------------------------- + // read_word() + // + // Read a data word from the given address in the DUT. + // the word read will be available in the global variable + // read_data. + //---------------------------------------------------------------- + task read_word(input [7 : 0] address); + begin + tb_address = address; + tb_cs = 1; + tb_write_read = 0; + #(2 * CLK_HALF_PERIOD); + read_data = tb_data_out; + tb_cs = 0; + + if (DEBUG) + begin + $display("*** Reading 0x%08x from 0x%02x.", read_data, address); + $display(""); + end + end + endtask // read_word + + + //---------------------------------------------------------------- + // check_name_version() + // + // Read the name and version from the DUT. + //---------------------------------------------------------------- + task check_name_version(); + reg [31 : 0] name0; + reg [31 : 0] name1; + reg [31 : 0] version; + begin + + read_word(ADDR_NAME0); + name0 = read_data; + read_word(ADDR_NAME1); + name1 = read_data; + read_word(ADDR_VERSION); + version = read_data; + + $display("DUT name: %c%c%c%c%c%c%c%c", + name0[31 : 24], name0[23 : 16], name0[15 : 8], name0[7 : 0], + name1[31 : 24], name1[23 : 16], name1[15 : 8], name1[7 : 0]); + $display("DUT version: %c%c%c%c", + version[31 : 24], version[23 : 16], version[15 : 8], version[7 : 0]); + end + endtask // check_name_version + + + //---------------------------------------------------------------- + // read_digest() + // + // Read the digest in the dut. The resulting digest will be + // available in the global variable digest_data. + //---------------------------------------------------------------- + task read_digest(); + begin + read_word(ADDR_DIGEST0); + digest_data[255 : 224] = read_data; + read_word(ADDR_DIGEST1); + digest_data[223 : 192] = read_data; + read_word(ADDR_DIGEST2); + digest_data[191 : 160] = read_data; + read_word(ADDR_DIGEST3); + digest_data[159 : 128] = read_data; + read_word(ADDR_DIGEST4); + digest_data[127 : 96] = read_data; + read_word(ADDR_DIGEST5); + digest_data[95 : 64] = read_data; + read_word(ADDR_DIGEST6); + digest_data[63 : 32] = read_data; + read_word(ADDR_DIGEST7); + digest_data[31 : 0] = read_data; + end + endtask // read_digest + + + //---------------------------------------------------------------- + // single_block_test() + // + // + // Perform test of a single block digest. + //---------------------------------------------------------------- + task single_block_test([511 : 0] block, + [255 : 0] expected); + begin + $display("*** TC%01d - Single block test started.", tc_ctr); + + write_block(block); + write_word(ADDR_CTRL, CTRL_INIT_VALUE); + write_word(ADDR_CTRL, 8'h00); + wait_ready(); + read_digest(); + + if (digest_data == expected) + begin + $display("TC%01d: OK.", tc_ctr); + end + else + begin + $display("TC%01d: ERROR.", tc_ctr); + $display("TC%01d: Expected: 0x%064x", tc_ctr, expected); + $display("TC%01d: Got: 0x%064x", tc_ctr, digest_data); + error_ctr = error_ctr + 1; + end + $display("*** TC%01d - Single block test done.", tc_ctr); + tc_ctr = tc_ctr + 1; + end + endtask // single_block_test + + + //---------------------------------------------------------------- + // double_block_test() + // + // + // Perform test of a double block digest. Note that we check + // the digests for both the first and final block. + //---------------------------------------------------------------- + task double_block_test([511 : 0] block0, + [255 : 0] expected0, + [511 : 0] block1, + [255 : 0] expected1 + ); + begin + $display("*** TC%01d - Double block test started.", tc_ctr); + + // First block + write_block(block0); + write_word(ADDR_CTRL, CTRL_INIT_VALUE); + write_word(ADDR_CTRL, 8'h00); + wait_ready(); + read_digest(); + + if (digest_data == expected0) + begin + $display("TC%01d first block: OK.", tc_ctr); + end + else + begin + $display("TC%01d: ERROR in first digest", tc_ctr); + $display("TC%01d: Expected: 0x%064x", tc_ctr, expected0); + $display("TC%01d: Got: 0x%064x", tc_ctr, digest_data); + error_ctr = error_ctr + 1; + end + + // Final block + write_block(block1); + write_word(ADDR_CTRL, CTRL_NEXT_VALUE); + write_word(ADDR_CTRL, 8'h00); + wait_ready(); + read_digest(); + + if (digest_data == expected1) + begin + $display("TC%01d final block: OK.", tc_ctr); + end + else + begin + $display("TC%01d: ERROR in final digest", tc_ctr); + $display("TC%01d: Expected: 0x%064x", tc_ctr, expected1); + $display("TC%01d: Got: 0x%064x", tc_ctr, digest_data); + error_ctr = error_ctr + 1; + end + + $display("*** TC%01d - Double block test done.", tc_ctr); + tc_ctr = tc_ctr + 1; + end + endtask // double_block_test + + + //---------------------------------------------------------------- + // sha256_test + // The main test functionality. + // + // Test cases taken from: + // http://csrc.nist.gov/groups/ST/toolkit/documents/Examples/SHA256.pdf + //---------------------------------------------------------------- + initial + begin : sha256_test + reg [511 : 0] tc0; + reg [255 : 0] res0; + + reg [511 : 0] tc1_0; + reg [255 : 0] res1_0; + reg [511 : 0] tc1_1; + reg [255 : 0] res1_1; + + $display(" -- Testbench for sha256 started --"); + + init_sim(); + reset_dut(); + check_name_version(); + + // dump_dut_state(); + // write_word(ADDR_BLOCK0, 32'hdeadbeef); + // dump_dut_state(); + // read_word(ADDR_BLOCK0); + // dump_dut_state(); + + tc0 = 512'h61626380000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000018; + res0 = 256'hBA7816BF8F01CFEA414140DE5DAE2223B00361A396177A9CB410FF61F20015AD; + single_block_test(tc0, res0); + + tc1_0 = 512'h6162636462636465636465666465666765666768666768696768696A68696A6B696A6B6C6A6B6C6D6B6C6D6E6C6D6E6F6D6E6F706E6F70718000000000000000; + res1_0 = 256'h85E655D6417A17953363376A624CDE5C76E09589CAC5F811CC4B32C1F20E533A; + tc1_1 = 512'h000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001C0; + res1_1 = 256'h248D6A61D20638B8E5C026930C3E6039A33CE45964FF2167F6ECEDD419DB06C1; + double_block_test(tc1_0, res1_0, tc1_1, res1_1); + + display_test_result(); + + $display(" -- Testbench for sha256 done. --"); + $finish; + end // sha256_test +endmodule // tb_sha256 + +//====================================================================== +// EOF tb_sha256.v +//====================================================================== -- cgit v1.2.3