diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/tb/tb_sha256_w_mem.v | 374 |
1 files changed, 374 insertions, 0 deletions
diff --git a/src/tb/tb_sha256_w_mem.v b/src/tb/tb_sha256_w_mem.v new file mode 100644 index 0000000..619d406 --- /dev/null +++ b/src/tb/tb_sha256_w_mem.v @@ -0,0 +1,374 @@ +//====================================================================== +// +// tb_sha256_w_mem.v +// ----------------- +// Testbench for the SHA-256 W memory module. +// +// +// Author: Joachim Strombergson +// Copyright (c) 2014, SUNET +// +// Redistribution and use in source and binary forms, with or +// without modification, are permitted provided that the following +// conditions are met: +// +// 1. Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in +// the documentation and/or other materials provided with the +// distribution. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +//====================================================================== + +//------------------------------------------------------------------ +// Simulator directives. +//------------------------------------------------------------------ +`timescale 1ns/10ps + +module tb_sha256_w_mem(); + + //---------------------------------------------------------------- + // Internal constant and parameter definitions. + //---------------------------------------------------------------- + parameter DEBUG = 0; + parameter DISPLAY_CYCLES = 0; + + parameter CLK_HALF_PERIOD = 2; + + + //---------------------------------------------------------------- + // Registers including update variables and write enable. + //---------------------------------------------------------------- + + + //---------------------------------------------------------------- + // Wires. + //---------------------------------------------------------------- + reg tb_clk; + reg tb_reset_n; + + reg tb_init; + reg [511 : 0] tb_block; + reg [5 : 0] tb_addr; + wire tb_ready; + wire [31 : 0] tb_w; + + reg [63 : 0] cycle_ctr; + reg [31 : 0] error_ctr; + reg [31 : 0] tc_ctr; + + + //---------------------------------------------------------------- + // Device Under Test. + //---------------------------------------------------------------- + sha256_w_mem dut( + .clk(tb_clk), + .reset_n(tb_reset_n), + + .init(tb_init), + + .block(tb_block), + .addr(tb_addr), + + .ready(tb_ready), + .w(tb_w) + ); + + + //---------------------------------------------------------------- + // clk_gen + // + // Clock generator process. + //---------------------------------------------------------------- + always + begin : clk_gen + #CLK_HALF_PERIOD tb_clk = !tb_clk; + end // clk_gen + + + //-------------------------------------------------------------------- + // dut_monitor + // + // Monitor displaying information every cycle. + // Includes the cycle counter. + //-------------------------------------------------------------------- + always @ (posedge tb_clk) + begin : dut_monitor + cycle_ctr = cycle_ctr + 1; + + if (DISPLAY_CYCLES) + begin + $display("cycle = %016x:", cycle_ctr); + end + + if (DEBUG) + begin + $display("dut ctrl_state = %02x:", dut.sha256_w_mem_ctrl_reg); + $display("dut w_ctr = %02x:", dut.w_ctr_reg); + end + end // dut_monitor + + + //---------------------------------------------------------------- + // dump_w_state() + // + // Dump the current state of all W registers. + //---------------------------------------------------------------- + task dump_w_state(); + begin + $display("W state:"); + + $display("w0_reg = %08x, w1_reg = %08x, w2_reg = %08x, w3_reg = %08x", + dut.w_mem[00], dut.w_mem[01], dut.w_mem[02], dut.w_mem[03]); + + $display("w4_reg = %08x, w5_reg = %08x, w6_reg = %08x, w7_reg = %08x", + dut.w_mem[04], dut.w_mem[05], dut.w_mem[06], dut.w_mem[07]); + + $display("w8_reg = %08x, w9_reg = %08x, w10_reg = %08x, w11_reg = %08x", + dut.w_mem[08], dut.w_mem[09], dut.w_mem[10], dut.w_mem[11]); + + $display("w12_reg = %08x, w13_reg = %08x, w14_reg = %08x, w15_reg = %08x", + dut.w_mem[12], dut.w_mem[13], dut.w_mem[14], dut.w_mem[15]); + + $display("w16_reg = %08x, w17_reg = %08x, w18_reg = %08x, w19_reg = %08x", + dut.w_mem[16], dut.w_mem[17], dut.w_mem[18], dut.w_mem[19]); + + $display("w20_reg = %08x, w21_reg = %08x, w22_reg = %08x, w23_reg = %08x", + dut.w_mem[20], dut.w_mem[21], dut.w_mem[22], dut.w_mem[23]); + + $display("w24_reg = %08x, w25_reg = %08x, w26_reg = %08x, w27_reg = %08x", + dut.w_mem[24], dut.w_mem[25], dut.w_mem[26], dut.w_mem[27]); + + $display("w28_reg = %08x, w29_reg = %08x, w30_reg = %08x, w31_reg = %08x", + dut.w_mem[28], dut.w_mem[29], dut.w_mem[30], dut.w_mem[31]); + + $display("w32_reg = %08x, w33_reg = %08x, w34_reg = %08x, w35_reg = %08x", + dut.w_mem[32], dut.w_mem[33], dut.w_mem[34], dut.w_mem[35]); + + $display("w36_reg = %08x, w37_reg = %08x, w38_reg = %08x, w39_reg = %08x", + dut.w_mem[36], dut.w_mem[37], dut.w_mem[38], dut.w_mem[39]); + + $display("w40_reg = %08x, w41_reg = %08x, w42_reg = %08x, w43_reg = %08x", + dut.w_mem[40], dut.w_mem[41], dut.w_mem[42], dut.w_mem[43]); + + $display("w44_reg = %08x, w45_reg = %08x, w46_reg = %08x, w47_reg = %08x", + dut.w_mem[44], dut.w_mem[45], dut.w_mem[46], dut.w_mem[47]); + + $display("w48_reg = %08x, w49_reg = %08x, w50_reg = %08x, w51_reg = %08x", + dut.w_mem[48], dut.w_mem[49], dut.w_mem[50], dut.w_mem[51]); + + $display("w52_reg = %08x, w53_reg = %08x, w54_reg = %08x, w55_reg = %08x", + dut.w_mem[52], dut.w_mem[53], dut.w_mem[54], dut.w_mem[55]); + + $display("w56_reg = %08x, w57_reg = %08x, w58_reg = %08x, w59_reg = %08x", + dut.w_mem[56], dut.w_mem[57], dut.w_mem[58], dut.w_mem[59]); + + $display("w60_reg = %08x, w61_reg = %08x, w62_reg = %08x, w63_reg = %08x", + dut.w_mem[60], dut.w_mem[61], dut.w_mem[62], dut.w_mem[63]); + + $display(""); + end + endtask // dump_state + + + //---------------------------------------------------------------- + // reset_dut + //---------------------------------------------------------------- + task reset_dut(); + begin + $display("*** Toggle reset."); + tb_reset_n = 0; + #(4 * CLK_HALF_PERIOD); + tb_reset_n = 1; + end + endtask // reset_dut + + + //---------------------------------------------------------------- + // init_sim + //---------------------------------------------------------------- + task init_sim(); + begin + $display("*** Simulation init."); + tb_clk = 0; + tb_reset_n = 1; + cycle_ctr = 0; + + tb_init = 0; + tb_block = 512'h00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000; + tb_addr = 0; + end + endtask // reset_dut + + + //---------------------------------------------------------------- + // dump_mem() + // + // Dump the contents of the memory by directly reading from + // the registers in the dut, not via the read port. + //---------------------------------------------------------------- + task dump_mem(); + begin + $display("*** Dumping memory:"); + $display("W[00] = 0x%08x", dut.w_mem[00]); + $display("W[01] = 0x%08x", dut.w_mem[01]); + $display("W[02] = 0x%08x", dut.w_mem[02]); + $display("W[03] = 0x%08x", dut.w_mem[03]); + $display("W[04] = 0x%08x", dut.w_mem[04]); + $display("W[05] = 0x%08x", dut.w_mem[05]); + $display("W[06] = 0x%08x", dut.w_mem[06]); + $display("W[07] = 0x%08x", dut.w_mem[07]); + $display("W[08] = 0x%08x", dut.w_mem[08]); + $display("W[09] = 0x%08x", dut.w_mem[09]); + $display("W[10] = 0x%08x", dut.w_mem[10]); + $display("W[11] = 0x%08x", dut.w_mem[11]); + $display("W[12] = 0x%08x", dut.w_mem[12]); + $display("W[13] = 0x%08x", dut.w_mem[13]); + $display("W[14] = 0x%08x", dut.w_mem[14]); + $display("W[15] = 0x%08x", dut.w_mem[15]); + $display("W[16] = 0x%08x", dut.w_mem[16]); + $display("W[17] = 0x%08x", dut.w_mem[17]); + $display("W[18] = 0x%08x", dut.w_mem[18]); + $display("W[19] = 0x%08x", dut.w_mem[19]); + $display("W[20] = 0x%08x", dut.w_mem[20]); + $display("W[21] = 0x%08x", dut.w_mem[21]); + $display("W[22] = 0x%08x", dut.w_mem[22]); + $display("W[23] = 0x%08x", dut.w_mem[23]); + $display("W[24] = 0x%08x", dut.w_mem[24]); + $display("W[25] = 0x%08x", dut.w_mem[25]); + $display("W[26] = 0x%08x", dut.w_mem[26]); + $display("W[27] = 0x%08x", dut.w_mem[27]); + $display("W[28] = 0x%08x", dut.w_mem[28]); + $display("W[29] = 0x%08x", dut.w_mem[29]); + $display("W[30] = 0x%08x", dut.w_mem[30]); + $display("W[31] = 0x%08x", dut.w_mem[31]); + $display("W[32] = 0x%08x", dut.w_mem[32]); + $display("W[33] = 0x%08x", dut.w_mem[33]); + $display("W[34] = 0x%08x", dut.w_mem[34]); + $display("W[35] = 0x%08x", dut.w_mem[35]); + $display("W[36] = 0x%08x", dut.w_mem[36]); + $display("W[37] = 0x%08x", dut.w_mem[37]); + $display("W[38] = 0x%08x", dut.w_mem[38]); + $display("W[39] = 0x%08x", dut.w_mem[39]); + $display("W[40] = 0x%08x", dut.w_mem[40]); + $display("W[41] = 0x%08x", dut.w_mem[41]); + $display("W[42] = 0x%08x", dut.w_mem[42]); + $display("W[43] = 0x%08x", dut.w_mem[43]); + $display("W[44] = 0x%08x", dut.w_mem[44]); + $display("W[45] = 0x%08x", dut.w_mem[45]); + $display("W[46] = 0x%08x", dut.w_mem[46]); + $display("W[47] = 0x%08x", dut.w_mem[47]); + $display("W[48] = 0x%08x", dut.w_mem[48]); + $display("W[49] = 0x%08x", dut.w_mem[49]); + $display("W[50] = 0x%08x", dut.w_mem[50]); + $display("W[51] = 0x%08x", dut.w_mem[51]); + $display("W[52] = 0x%08x", dut.w_mem[52]); + $display("W[53] = 0x%08x", dut.w_mem[53]); + $display("W[54] = 0x%08x", dut.w_mem[54]); + $display("W[55] = 0x%08x", dut.w_mem[55]); + $display("W[56] = 0x%08x", dut.w_mem[56]); + $display("W[57] = 0x%08x", dut.w_mem[57]); + $display("W[58] = 0x%08x", dut.w_mem[58]); + $display("W[59] = 0x%08x", dut.w_mem[59]); + $display("W[60] = 0x%08x", dut.w_mem[00]); + $display("W[61] = 0x%08x", dut.w_mem[61]); + $display("W[62] = 0x%08x", dut.w_mem[62]); + $display("W[63] = 0x%08x", dut.w_mem[63]); + $display(""); + end + endtask // dump_mem + + + //---------------------------------------------------------------- + // test_w_schedule() + // + // Test that W scheduling happens and work correctly. + // Note: Currently not a self checking test case. + //---------------------------------------------------------------- + task test_w_schedule(); + begin + $display("*** Test of W schedule processing. --"); + tb_block = 512'h61626380000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000018; + tb_init = 1; + #(4 * CLK_HALF_PERIOD); + tb_init = 0; + dump_w_state(); + + #(25 * CLK_HALF_PERIOD); + dump_w_state(); + + #(25 * CLK_HALF_PERIOD); + dump_w_state(); + + #(25 * CLK_HALF_PERIOD); + dump_w_state(); + + #(25 * CLK_HALF_PERIOD); + dump_w_state(); + end + endtask // test_w_schedule + + + //---------------------------------------------------------------- + // test_read_w/( + // + // Test that we can read data from all W registers. + // Note: Currently not a self checking test case. + //---------------------------------------------------------------- + task test_read_w(); + reg [6 : 0] i; + begin + $display("*** Test of W read operations. --"); + i = 0; + while (i < 64) + begin + tb_addr = i[5 : 0]; + $display("API: w%02x, internal w%02x = 0x%02x", tb_addr, dut.addr, dut.w_tmp); + i = i + 1; + #(2 * CLK_HALF_PERIOD); + end + end + endtask // read_w + + + //---------------------------------------------------------------- + // The main test functionality. + //---------------------------------------------------------------- + initial + begin : w_mem_test + $display(" -- Testbench for sha256 w memory started --"); + init_sim(); + + dump_mem(); + reset_dut(); + dump_mem(); + + test_w_schedule(); + dump_mem(); + + test_read_w(); + + $display("*** Simulation done."); + $finish; + end + +endmodule // w_mem_test + +//====================================================================== +// EOF tb_sha256_w_mem.v +//====================================================================== |