From febb27562431216a080cb980fdcda09454e72c38 Mon Sep 17 00:00:00 2001 From: Paul Selkirk Date: Tue, 31 Mar 2015 16:27:53 -0400 Subject: Revert streamlined wrapper, and don't delay register reads. --- src/rtl/sha1.v | 794 ++++++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 618 insertions(+), 176 deletions(-) (limited to 'src/rtl/sha1.v') diff --git a/src/rtl/sha1.v b/src/rtl/sha1.v index d0b4a4e..8743fe6 100644 --- a/src/rtl/sha1.v +++ b/src/rtl/sha1.v @@ -5,34 +5,35 @@ // Top level wrapper for the SHA-1 hash function providing // a simple memory like interface with 32 bit data access. // -// Authors: Joachim Strömbergson, Paul Selkirk -// Copyright (c) 2014-2015, NORDUnet A/S All rights reserved. -// -// Redistribution and use in source and binary forms, with or without -// modification, are permitted provided that the following conditions are -// met: -// - Redistributions of source code must retain the above copyright notice, -// this list of conditions and the following disclaimer. // -// - Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in the -// documentation and/or other materials provided with the distribution. +// Author: Joachim Strombergson +// Copyright (c) 2014, SUNET +// All rights reserved. // -// - Neither the name of the NORDUnet nor the names of its contributors may -// be used to endorse or promote products derived from this software -// without specific prior written permission. +// Redistribution and use in source and binary forms, with or +// without modification, are permitted provided that the following +// conditions are met: // -// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED -// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED -// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// 1. Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in +// the documentation and/or other materials provided with the +// distribution. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // //====================================================================== @@ -46,159 +47,600 @@ module sha1( input wire we, // Data ports. - input wire [7 : 0] address, - input wire [31 : 0] write_data, - output wire [31 : 0] read_data - ); - - //---------------------------------------------------------------- - // Internal constant and parameter definitions. - //---------------------------------------------------------------- - parameter ADDR_NAME0 = 8'h00; - parameter ADDR_NAME1 = 8'h01; - parameter ADDR_VERSION = 8'h02; - - parameter ADDR_CTRL = 8'h08; - parameter CTRL_INIT_BIT = 0; - parameter CTRL_NEXT_BIT = 1; - - parameter ADDR_STATUS = 8'h09; - parameter STATUS_READY_BIT = 0; - parameter STATUS_VALID_BIT = 1; - - parameter ADDR_BLOCK = 8'h10; - - parameter ADDR_DIGEST = 8'h20; - - parameter CORE_NAME0 = 32'h73686131; // "sha1" - parameter CORE_NAME1 = 32'h20202020; // " " - parameter CORE_VERSION = 32'h302e3530; // "0.50" - - parameter BLOCK_BITS = 512; - parameter DIGEST_BITS = 160; - parameter BLOCK_WORDS = BLOCK_BITS / 32; - parameter DIGEST_WORDS = DIGEST_BITS / 32; - - //---------------------------------------------------------------- - // Registers. - //---------------------------------------------------------------- - reg [0 : BLOCK_BITS - 1] block_reg; - reg [0 : DIGEST_BITS - 1] digest_reg; - reg init_reg; - reg next_reg; - - reg [31 : 0] tmp_read_data; - reg [31 : 0] tmp_read_data_reg; - - //---------------------------------------------------------------- - // Wires. - //---------------------------------------------------------------- - wire core_init; - wire core_next; - wire core_ready; - wire [0 : BLOCK_BITS - 1] core_block; - wire [0 : DIGEST_BITS - 1] core_digest; - wire core_digest_valid; - - wire [31 : 0] core_name0 = CORE_NAME0; - wire [31 : 0] core_name1 = CORE_NAME1; - wire [31 : 0] core_version = CORE_VERSION; - wire [31 : 0] core_ctrl; - wire [31 : 0] core_status; - - //---------------------------------------------------------------- - // Concurrent connectivity for ports etc. - //---------------------------------------------------------------- - assign core_init = init_reg; - assign core_next = next_reg; - assign core_ctrl = { 30'b0, next_reg, init_reg }; - assign core_status = { 30'b0, core_digest_valid, core_ready }; - assign core_block = block_reg; - - assign read_data = tmp_read_data_reg; - - //---------------------------------------------------------------- - // core instantiation. - //---------------------------------------------------------------- - sha1_core core( - .clk(clk), - .reset_n(reset_n), - - .init(core_init), - .next(core_next), - - .block(core_block), - - .ready(core_ready), - - .digest(core_digest), - .digest_valid(core_digest_valid) + input wire [7 : 0] address, + input wire [31 : 0] write_data, + output wire [31 : 0] read_data, + output wire error + ); + + //---------------------------------------------------------------- + // Internal constant and parameter definitions. + //---------------------------------------------------------------- + parameter ADDR_NAME0 = 8'h00; + parameter ADDR_NAME1 = 8'h01; + parameter ADDR_VERSION = 8'h02; + + parameter ADDR_CTRL = 8'h08; + parameter CTRL_INIT_BIT = 0; + parameter CTRL_NEXT_BIT = 1; + + parameter ADDR_STATUS = 8'h09; + parameter STATUS_READY_BIT = 0; + parameter STATUS_VALID_BIT = 1; + + parameter ADDR_BLOCK0 = 8'h10; + parameter ADDR_BLOCK1 = 8'h11; + parameter ADDR_BLOCK2 = 8'h12; + parameter ADDR_BLOCK3 = 8'h13; + parameter ADDR_BLOCK4 = 8'h14; + parameter ADDR_BLOCK5 = 8'h15; + parameter ADDR_BLOCK6 = 8'h16; + parameter ADDR_BLOCK7 = 8'h17; + parameter ADDR_BLOCK8 = 8'h18; + parameter ADDR_BLOCK9 = 8'h19; + parameter ADDR_BLOCK10 = 8'h1a; + parameter ADDR_BLOCK11 = 8'h1b; + parameter ADDR_BLOCK12 = 8'h1c; + parameter ADDR_BLOCK13 = 8'h1d; + parameter ADDR_BLOCK14 = 8'h1e; + parameter ADDR_BLOCK15 = 8'h1f; + + parameter ADDR_DIGEST0 = 8'h20; + parameter ADDR_DIGEST1 = 8'h21; + parameter ADDR_DIGEST2 = 8'h22; + parameter ADDR_DIGEST3 = 8'h23; + parameter ADDR_DIGEST4 = 8'h24; + + parameter CORE_NAME0 = 32'h73686131; // "sha1" + parameter CORE_NAME1 = 32'h20202020; // " " + parameter CORE_VERSION = 32'h302e3530; // "0.50" + + + //---------------------------------------------------------------- + // Registers including update variables and write enable. + //---------------------------------------------------------------- + reg init_reg; + reg init_new; + reg init_we; + reg init_set; + + reg next_reg; + reg next_new; + reg next_we; + reg next_set; + + reg ready_reg; + + reg [31 : 0] block0_reg; + reg block0_we; + reg [31 : 0] block1_reg; + reg block1_we; + reg [31 : 0] block2_reg; + reg block2_we; + reg [31 : 0] block3_reg; + reg block3_we; + reg [31 : 0] block4_reg; + reg block4_we; + reg [31 : 0] block5_reg; + reg block5_we; + reg [31 : 0] block6_reg; + reg block6_we; + reg [31 : 0] block7_reg; + reg block7_we; + reg [31 : 0] block8_reg; + reg block8_we; + reg [31 : 0] block9_reg; + reg block9_we; + reg [31 : 0] block10_reg; + reg block10_we; + reg [31 : 0] block11_reg; + reg block11_we; + reg [31 : 0] block12_reg; + reg block12_we; + reg [31 : 0] block13_reg; + reg block13_we; + reg [31 : 0] block14_reg; + reg block14_we; + reg [31 : 0] block15_reg; + reg block15_we; + + reg [159 : 0] digest_reg; + + reg digest_valid_reg; + + + //---------------------------------------------------------------- + // Wires. + //---------------------------------------------------------------- + wire core_init; + wire core_next; + wire core_ready; + wire [511 : 0] core_block; + wire [159 : 0] core_digest; + wire core_digest_valid; + + reg [31 : 0] tmp_read_data; + reg tmp_error; + + + //---------------------------------------------------------------- + // Concurrent connectivity for ports etc. + //---------------------------------------------------------------- + assign core_init = init_reg; + + assign core_next = next_reg; + + assign core_block = {block0_reg, block1_reg, block2_reg, block3_reg, + block4_reg, block5_reg, block6_reg, block7_reg, + block8_reg, block9_reg, block10_reg, block11_reg, + block12_reg, block13_reg, block14_reg, block15_reg}; + + assign read_data = tmp_read_data; + assign error = tmp_error; + + + //---------------------------------------------------------------- + // core instantiation. + //---------------------------------------------------------------- + sha1_core core( + .clk(clk), + .reset_n(reset_n), + + .init(core_init), + .next(core_next), + + .block(core_block), + + .ready(core_ready), + + .digest(core_digest), + .digest_valid(core_digest_valid) ); - //---------------------------------------------------------------- - // latch in digest when ready - //---------------------------------------------------------------- - always @(posedge clk) - begin - if (core_digest_valid) - digest_reg <= core_digest; - end - - //---------------------------------------------------------------- - // storage registers for mapping memory to core interface - //---------------------------------------------------------------- - always @(posedge clk) - begin - init_reg <= 0; - next_reg <= 0; - - if (cs && we) - begin - // write operations - if ((address >= ADDR_BLOCK) && - (address < ADDR_BLOCK + BLOCK_WORDS)) - block_reg[((address - ADDR_BLOCK) * 32)+:32] <= write_data; - else if (address == ADDR_CTRL) - begin - init_reg <= write_data[CTRL_INIT_BIT]; - next_reg <= write_data[CTRL_NEXT_BIT]; - end - end - end - - always @* - begin - tmp_read_data = 32'h00000000; - - if (cs && !we) - begin - // read operations - if ((address >= ADDR_BLOCK) && - (address < ADDR_BLOCK + BLOCK_WORDS)) - tmp_read_data = block_reg[((address - ADDR_BLOCK) * 32)+:32]; - else if ((address >= ADDR_DIGEST) && - (address < ADDR_DIGEST + DIGEST_WORDS)) - tmp_read_data = digest_reg[((address - ADDR_DIGEST) * 32)+:32]; - else - case (address) - ADDR_NAME0: - tmp_read_data = core_name0; - ADDR_NAME1: - tmp_read_data = core_name1; - ADDR_VERSION: - tmp_read_data = core_version; - ADDR_CTRL: - tmp_read_data = core_ctrl; - ADDR_STATUS: - tmp_read_data = core_status; - endcase - end - end - - always @(posedge clk) - begin - tmp_read_data_reg <= tmp_read_data; - end + //---------------------------------------------------------------- + // reg_update + // Update functionality for all registers in the core. + // All registers are positive edge triggered with + // asynchronous active low reset. + //---------------------------------------------------------------- + always @ (posedge clk or negedge reset_n) + begin + if (!reset_n) + begin + init_reg <= 0; + next_reg <= 0; + ready_reg <= 0; + digest_reg <= 160'h0000000000000000000000000000000000000000; + digest_valid_reg <= 0; + block0_reg <= 32'h00000000; + block1_reg <= 32'h00000000; + block2_reg <= 32'h00000000; + block3_reg <= 32'h00000000; + block4_reg <= 32'h00000000; + block5_reg <= 32'h00000000; + block6_reg <= 32'h00000000; + block7_reg <= 32'h00000000; + block8_reg <= 32'h00000000; + block9_reg <= 32'h00000000; + block10_reg <= 32'h00000000; + block11_reg <= 32'h00000000; + block12_reg <= 32'h00000000; + block13_reg <= 32'h00000000; + block14_reg <= 32'h00000000; + block15_reg <= 32'h00000000; + end + else + begin + ready_reg <= core_ready; + digest_valid_reg <= core_digest_valid; + + if (init_we) + begin + init_reg <= init_new; + end + + if (next_we) + begin + next_reg <= next_new; + end + + if (core_digest_valid) + begin + digest_reg <= core_digest; + end + + if (block0_we) + begin + block0_reg <= write_data; + end + + if (block1_we) + begin + block1_reg <= write_data; + end + + if (block2_we) + begin + block2_reg <= write_data; + end + + if (block3_we) + begin + block3_reg <= write_data; + end + + if (block4_we) + begin + block4_reg <= write_data; + end + + if (block5_we) + begin + block5_reg <= write_data; + end + + if (block6_we) + begin + block6_reg <= write_data; + end + + if (block7_we) + begin + block7_reg <= write_data; + end + + if (block8_we) + begin + block8_reg <= write_data; + end + + if (block9_we) + begin + block9_reg <= write_data; + end + + if (block10_we) + begin + block10_reg <= write_data; + end + + if (block11_we) + begin + block11_reg <= write_data; + end + + if (block12_we) + begin + block12_reg <= write_data; + end + + if (block13_we) + begin + block13_reg <= write_data; + end + + if (block14_we) + begin + block14_reg <= write_data; + end + + if (block15_we) + begin + block15_reg <= write_data; + end + + end + end // reg_update + + + //---------------------------------------------------------------- + // flag_reset + // + // Logic to reset init and next flags that has been set. + //---------------------------------------------------------------- + always @* + begin : flag_reset + init_new = 0; + init_we = 0; + next_new = 0; + next_we = 0; + if (init_set) + begin + init_new = 1; + init_we = 1; + end + else if (init_reg) + begin + init_new = 0; + init_we = 1; + end + + if (next_set) + begin + next_new = 1; + next_we = 1; + end + else if (next_reg) + begin + next_new = 0; + next_we = 1; + end + end + + + //---------------------------------------------------------------- + // api + // + // The interface command decoding logic. + //---------------------------------------------------------------- + always @* + begin : api + init_set = 0; + next_set = 0; + block0_we = 0; + block1_we = 0; + block2_we = 0; + block3_we = 0; + block4_we = 0; + block5_we = 0; + block6_we = 0; + block7_we = 0; + block8_we = 0; + block9_we = 0; + block10_we = 0; + block11_we = 0; + block12_we = 0; + block13_we = 0; + block14_we = 0; + block15_we = 0; + tmp_read_data = 32'h00000000; + tmp_error = 0; + + if (cs) + begin + if (we) + begin + case (address) + // Write operations. + ADDR_CTRL: + begin + init_set = write_data[CTRL_INIT_BIT]; + next_set = write_data[CTRL_NEXT_BIT]; + end + + ADDR_BLOCK0: + begin + block0_we = 1; + end + + ADDR_BLOCK1: + begin + block1_we = 1; + end + + ADDR_BLOCK2: + begin + block2_we = 1; + end + + ADDR_BLOCK3: + begin + block3_we = 1; + end + + ADDR_BLOCK4: + begin + block4_we = 1; + end + + ADDR_BLOCK5: + begin + block5_we = 1; + end + + ADDR_BLOCK6: + begin + block6_we = 1; + end + + ADDR_BLOCK7: + begin + block7_we = 1; + end + + ADDR_BLOCK8: + begin + block8_we = 1; + end + + ADDR_BLOCK9: + begin + block9_we = 1; + end + + ADDR_BLOCK10: + begin + block10_we = 1; + end + + ADDR_BLOCK11: + begin + block11_we = 1; + end + + ADDR_BLOCK12: + begin + block12_we = 1; + end + + ADDR_BLOCK13: + begin + block13_we = 1; + end + + ADDR_BLOCK14: + begin + block14_we = 1; + end + + ADDR_BLOCK15: + begin + block15_we = 1; + end + + default: + begin + tmp_error = 1; + end + endcase // case (addr) + end // if (write_read) + + else + begin + case (address) + // Read operations. + ADDR_NAME0: + begin + tmp_read_data = CORE_NAME0; + end + + ADDR_NAME1: + begin + tmp_read_data = CORE_NAME1; + end + + ADDR_VERSION: + begin + tmp_read_data = CORE_VERSION; + end + + ADDR_CTRL: + begin + tmp_read_data = {28'h0000000, 2'b00, next_reg, init_reg}; + end + + ADDR_STATUS: + begin + tmp_read_data = {28'h0000000, 2'b00, digest_valid_reg, ready_reg}; + end + + ADDR_BLOCK0: + begin + tmp_read_data = block0_reg; + end + + ADDR_BLOCK1: + begin + tmp_read_data = block1_reg; + end + + ADDR_BLOCK2: + begin + tmp_read_data = block2_reg; + end + + ADDR_BLOCK3: + begin + tmp_read_data = block3_reg; + end + + ADDR_BLOCK4: + begin + tmp_read_data = block4_reg; + end + + ADDR_BLOCK5: + begin + tmp_read_data = block5_reg; + end + + ADDR_BLOCK6: + begin + tmp_read_data = block6_reg; + end + + ADDR_BLOCK7: + begin + tmp_read_data = block7_reg; + end + + ADDR_BLOCK8: + begin + tmp_read_data = block8_reg; + end + + ADDR_BLOCK9: + begin + tmp_read_data = block9_reg; + end + + ADDR_BLOCK10: + begin + tmp_read_data = block10_reg; + end + + ADDR_BLOCK11: + begin + tmp_read_data = block11_reg; + end + + ADDR_BLOCK12: + begin + tmp_read_data = block12_reg; + end + + ADDR_BLOCK13: + begin + tmp_read_data = block13_reg; + end + + ADDR_BLOCK14: + begin + tmp_read_data = block14_reg; + end + + ADDR_BLOCK15: + begin + tmp_read_data = block15_reg; + end + + ADDR_DIGEST0: + begin + tmp_read_data = digest_reg[159 : 128]; + end + + ADDR_DIGEST1: + begin + tmp_read_data = digest_reg[127 : 96]; + end + + ADDR_DIGEST2: + begin + tmp_read_data = digest_reg[95 : 64]; + end + + ADDR_DIGEST3: + begin + tmp_read_data = digest_reg[63 : 32]; + end + + ADDR_DIGEST4: + begin + tmp_read_data = digest_reg[31 : 0]; + end + + default: + begin + tmp_error = 1; + end + endcase // case (addr) + end + end + end // addr_decoder endmodule // sha1 + +//====================================================================== +// EOF sha1.v +//====================================================================== -- cgit v1.2.3